Drivers/Hardware :: Only 2 Speakers Work Out Of 6 - Logitech X350 Audio System
Sep 3, 2015
I registered today to seek for a solution to this annoying problem. I have the Logitech x350 Audio system, with 6 speakers and one sub-woofer and they worked pretty well on my former OS, Windows 8.1 x64.
Now I am currently using W10 and have used the same driver as before. However, analog output has become unchangeable, just like in this image.
I really want to use all of my speakers, as I was able to before. Only two of them work properly. I tried changing them from the Playback devices in my audio panel, but that doesn't work either.
View 4 Replies
Similar Messages:
Aug 15, 2015
I recently updated to Win 10, and the first thing I noticed was that the sound settings were weird. Both speakers and headphone sounds work perfectly fine, but they don't automatically switch when I plug/unplug the headphones. I have to manually go into sound and set one device or another to default.
View 9 Replies
Aug 5, 2015
I have a Dell Latitude E6520 running Windows 10 Pro x64. When I try to watch YouTube I get no audio. Spotify plays and gives no errors but doesn't have sound. When I plug in headphone sound plays but as communications headphones.
When I try to play a test sound through Speakers/Headphones I get an error that says "Failed to play test tone." When I try to troubleshoot it can't identify the problem. I have attached the report from troubleshooting.
View 3 Replies
Nov 20, 2015
I have a set of Z506 and I cant seem to get the two rear speakers to work.I double checked my work and still nothing. I already have windows setup to run in 5.1, and even there the two rears wont play a sound.
View 5 Replies
Nov 20, 2015
I actually have two issues (the second being that the built-in microphone isn't working, but that's the least of my worries). I have my laptop connected to an external monitor & I can't get any non-system sounds to play.
Dell Laptop w/ only HDMI video connected to Dell VGA monitor (no speakers) via an adapter that has a 3.5mm jack for speakers. I can get system sounds via the laptop's speakers, but I can't play MP3s and YouTube videos have no sound. I had things working at one point (no, I cannot remember what I did or can find the tutorial that I used), but after moving my desk (unhooking the laptop from the monitor), cussing at non-functional microphone, and setting things back up, I'm back to no sounds. When I did get the speakers to work, they were working on the 3.5mm headphone/microphone jack on the laptop, but not through the jack on the HDMI/VGA adapter.
I've seen things about disabling the HDMI audio controller. I cannot change the default audio devices via the sound dialog box that is available by right-clicking on the sound icon on the bottom right of the screen. I'm assuming that the Dell speakers that are stuck as default are the on-board ones on the laptop.
View 1 Replies
Nov 19, 2015
I have a laptop - Asus GL551JW-DS71.
My speakers work fine but when I plug in my headphones, I can't hear any sound from the headphones. The headphones do work as I use them for my desktop.
I have tried updating the sound drivers from the device manager.
I have tried removing the drivers and redownloading the audio drivers from Acers website.
I have tried 'installing' audio driver with the default windows 10 audio driver instead of the realtek one.
I have tried adjusting the sample rate in the advanced properties tab.
What can I do to get sound working in my headphones again and not just the speakers.
View 4 Replies
Sep 6, 2015
Today when I plugged in my earphones (the apple ones) and there was no audio at all, but somehow it worked totally fine without the earphones. Even realtek detected something when I plugged my earphones, I also went to device manager to check if every driver is updated or not but still ended up no luck.
things i know:
- Audio is perfect without earphones plugged in
- only 'Speakers' is shown as my playback device
- went to device manager and i'm pretty sure all drivers are up to date and enabled
- everything was working fine the last time i booted into my windows10 (dual booting with linux)
- realtek detected my earphone as it popped up a notification saying 'you just plugged a device into the audio jack'
View 9 Replies
Jul 31, 2015
My PC is the HP ENVY TouchSmart M7-J120DX with Beats Audio quad speakers and two subwoofers. After running a clean installation of Windows 10, my volume icon had an error "no audio device output" / IDT High Definition Audio Codec. The troubleshooting option did nothing. I uninstalled my audio device, and restarted my pc. My sound is back, but it seems that the middle speakers are the only ones working. My volume icon and sound device now is labeled "High Definition Audio Device" which now sounds substandard, just like those cheap tinny speakers you can find at the dollar store. How to recover my original great-sounding original speakers!
View 4 Replies
Mar 5, 2016
Following a necessary reset of Win 10 I have no audio at all. When going to IDT High Definition Audio codec in device Manager and initialising reinstall Driver, the driver is found but installation has failed because "a device attached to the system is not functioning". What device?
View 4 Replies
Sep 2, 2015
After the latest updates to Windows 10 on 1 September, my Logitech mouse has lost several of its functions (including the scroll function) in all applications. I downloaded the latest Setpoint and reinstalled it and then rebooted, but nothing has changed.
View 9 Replies
Oct 19, 2015
Realtek HD Changing Jack output reassignments ( FIX ) - I found this old thread but Its not useful because my regedit index doesn't look the same as theirs.
I don't have a "DevType_0888_SS147b1083" or "DevType_0885_SS18490890" folder in "HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{4D36E96C-E325-11CE-BFC1-08002BE10318}000Settings"
Mine is named "Drv7541_DevType_0889_SS10438418" and I don't know which files I'm supposed to edit there.
This is what it looks like....
View 3 Replies
Dec 1, 2015
I have a problem for a long time with my 5.1 Logitech surround system. My center speaker is not working (physically yes). I have ASUS Maximus Hero VII motherboard. Plugged jack layout: orange: subwoofer/center channel, black: rear speakers, lime: front speakers. E.g.: while I'm watching a film, I can hear every effect clear, but I can't the dialogs, which is the center speaker's task i think. I'm using VLC the config is correct in the program.
View 9 Replies
Aug 26, 2015
I've been trying to find a work around for my Web Cam cant find a driver windows is saying this web cam not compatible with win 10. Not really wanting to have to buy new web cam
View 3 Replies
Mar 14, 2016
Is it possible to send the audio signal of my (no smart) tv set to my Samsung Multiroom speakers and if yes, how?
View 1 Replies
Dec 10, 2015
I recently opted for the free Windows 10 upgrade (still debating if it was worth it) from a Windows 7. Long story short, there was a new problem every day so I just wiped everything and did a clean install hoping the old windows 7 files would stop clashing with the new windows 10 files. All went well and was working fine when boom my speakers start acting up. Don't know what I did to trigger it, it just started doing this.
Basically, when using my USB connected headset, everything runs fine, sounds nice, no problems. When I change over to my desktop speakers though, all audio and video goes into "slow motion" and makes obnoxious sounds. Computer doesn't lag, just audio and video for YouTube, games, etc.
I've tried reinstalling drivers via device manager and it says it's all up to date. I just tried installing Realtek audio driver manually and now it won't even play sound through the speakers. I know the speakers are fine because they sound beautiful when plugged into my ps4.
Update: After installing Realtek and doing a restart, the speakers are in fact making sound, but now it's also extremely quiet and scratchy. Had to crank it to max just to hear anything.
Update: May have fixed my problem, at least temporarily.
I went to device manager and deleted the speakers then restarted so that it would auto reinstall them. Seems to work fine again...
Update: As I had guessed, it was only temporary. Sound and video just started going all slow motion again. Back to square one and back to the drawing board...
View 1 Replies
Aug 4, 2015
I have a Fangbook III made by Cyperpower PC. I am unable to play sound via the on-board speakers for the laptop. I am however able to play sound through the 3.5mm auxiliary jack input. I have speakers set as default device under the playback settings.
This is where is gets strange. Whenever I attempt to delete the Realtek audio driver, whether it is through windows or a 3rd-party driver uninstallation software, Realtek always comes back within a few seconds. Right before it does come back, under playback, it separates speakers and headphones with both having the driver High Definition Audio Device. If I hurry before the Realtek driver comes back the speakers seems to work! But once the Realtek audio speakers comes back, the default speakers and headphones goes away and I continue to have the same problem with the Realtek driver.
I attempted to reformat the computer with windows 10 and erase all drivers but Realtek was already installed. I assume it is required for this specific laptop? How to direct the Reaktek High Definition Audio driver to use the speakers instead of the auxiliary jack?
[URL] ....
View 1 Replies
Aug 8, 2015
I have recently installed window's 10 and have only recently discovered a program called realtek HD Audio manager. I would like to have separate audio through speakers and headphones, but the realtek only allows me to hear audio through one audio source. is there a way to separate the two so i can have audio (music etc) and have Skype run through my headphones. this problem only occurred after installing windows 10.
View 1 Replies
Feb 3, 2016
Lost sound in window10 my speakers work but no sound. hookups are good. I have new speaker no sound.
View 3 Replies
Aug 1, 2015
After the install of windows 10, our speakers won't work, that are connected to our desktop computer
View 5 Replies
Apr 16, 2015
Realtek driver version: R2.75 [The problem was still there when I used default audio drivers shipped with Windows].
I've been trying to get my system audio front panel to work for a longg time now. I am using build 10041 and the issue still persisted. This is the 3rd build since I've started using Windows 10 and I am still not able to solve the problem. I need front panel to work because my built in audio back panel female jacks decided not to work. When I use back panel, I frequently keep getting "Audio plugged" and "Audio unplugged" popups and there's no audio. I believe it's with the ports. I've permanently started using front panel which works perfectly fine in Windows 7 but not at all in Windows 10 preview.
Here are all the screenshots that I took to explain things in details.
Image 1:
Image 2:
Image 3: - No front panel option.
Image 4:
Image 5:
Image 6:
Image 7:
Image 8:
View 5 Replies
Feb 10, 2016
On my son's laptop, he has 2 playback devices, HD audio and speakers. If set to HD audio, no sound. If set to speakers, perfect. Problem is it won't stay set to speakers. Drivers are up to date. Its a Lenovo Carbon laptop (don't have exact model with me now). PC primarily used for gaming, mostly Steam.
View 3 Replies
Oct 8, 2015
I started up my laptop a while ago to play some music while I do work but when I plugged in my headphones there was no music. The music plays on the speakers but headphones nothing.... I have tried many headphones on my laptop and none worked but they do work on my iPod. I am using Asus Zen Book pro UX501, windows 10 64 bit....
View 2 Replies
Oct 15, 2015
After installing Windows 10,for some reason I have no sound on my monitor speakers.I upgraded from Windows 7 where there were no problems.When I open Device Manager/ Audio inputs and outputs.click on speakers it says "this device is working properly".On trying the Test button it lights up Green but still no sound.
View 3 Replies
Nov 16, 2015
Since the Nov update I only get sound from my speakers. When I choose "AMD HDMI Output" (for head phones ) and set default nothing happens. All worked fine prior to update. AMD drivers are up to date.
Headphones are connected to the rear of Asus Display.
View 3 Replies
Aug 7, 2015
I installed Windows 10 last week and have been using it with mainly no problems (apart from my DVD/CD drive not working, which I posted a thread here about but haven't received any responses yet ).When I am visiting my family back home in England I often plug my laptop into the tv to watch films with the kids through the HDMI port. I usually have to change the "default" audio device to the AMD HDMI Output to do this, and then change it back afterwards. I did this once with no problems.
However, the last time I watched something I didn't change it back before shutting down. And now my "Internal Speakers" device has disappeared. I tried uninstalling all drivers relating to sound devices in device manager and doing a scan for changes - the HD Audio device reappeared, but still no "internal speakers" option. I tried checking "show disabled devices" in the "playback devices" window, still no joy. I uninstalled everything again and used the drivers from the ASUS support page for my model laptop (ASUS x53z) and still nothing
I installed the updated sound drivers from AMD in the sticky post here. Again, nothing but the HDMI audio option. This is frustrating as I live abroad and my laptop is my main method of both communicating home and watching media. I can't use my headphones now.I have considered doing a System Restore, but crazily the only System restore point available is from when some automatic updates were installed after the issue appeared. My only option is to do a System Reset, losing all my applications, but i'm not convinced this will solve the issue. I have noticed that there is one device showing that it is unable to start in device manager.
View 4 Replies
Aug 18, 2015
In windows 7, when headphones were plugged into the jack on the front of the machine it would automatically switch to the headphones and mute the speakers. If you unplugged them, it would enable the speakers. How would I go about enabling this on Windows 10?
View 2 Replies
