how to make my Nikon D50 camera work on Windows 10? It worked fine on XP and 7, but not at all since upgrading to 10. The windows 10 help page has a link to Nikon, but the D50 driver is not available from there.
View 1 RepliesThe camera on my Toshiba S50-B laptop worked fine when on the original Windows 8.1 but doesn't work now that I have upgraded to Windows 10. It says "Something went wrong - make sure your camera is connected and not being used by another application". I have tried everything I know of and find no reason. Is there another driver required or ...? I cannot even find the camera.
View 2 RepliesI updated to the latest drivers for Intel AVStream Camera on my tablet / laptop. After the update, only the front camera works now.
View 1 RepliesI installed Windows 10 today on my Toshiba laptop Satellite P755, I now cannot get my camera to work.
View 1 RepliesPrior to and outside of Windows 10 my Skype Microsoft video camera works fine... as does the whole Skype application
If I fire up Skype via Windows 10 everything works except my video camera. I get pictures and voice from the other party, they can hear me but cannot see me as my Video camera is acting DEAD !
I've been trying to make a PE image and it is working fine. I can add programs (Macrium, PaleMoon, Explorer++) and it works fine in VM (through virtual Ethernet). It also works booting it from USB.
What I can't do is make WiFi work when booting from USB. I need this as I don't have Ethernet at all on my laptop.
I've tried adding the various drivers but can't get it to work.
This is what I have done so far for WiFi:
Code:
# Add any device drivers (.inf files) - this folder contains BroadcomWirelessWin8x64
Dism /Add-Driver /Image:"$WorkDirmount" /Driver:"$HomeDirDrivers" /recurse
# For Wifi - http://www.msfn.org/board/topic/162453-winpe-40-enable-wireless-support/
Dism /Add-Driver /Image:"$WorkDirmount" /Driver:"$env:SystemRootInf
etnwifi.inf"
Dism /Add-Driver /Image:"$WorkDirmount" /Driver:"$env:SystemRootInf
[code]....
How to make Photoshop 7 to work on Windows 10?
View 9 RepliesLocalhost is not running correctly in windows 10 how do I fix this or remove winds 10.
View 1 RepliesI've tried all the generic ways, using powershell, using Tweaking WIndows Repair Etc.I don't want to keep restoring windows 10 everytime it happens. I remember I fixed this once by using regedit.
View 1 RepliesWhen I put my desktop PC to sleep, it often wakes up in about a minute.
how to make the sleep function work properly?
Just prior to updating to Windows 10, I had no issues. Now, I get a message that my device has malfunctioned. Microsoft have a solution, or is this just another issue that's being ignored?
View 4 RepliesI just upgraded, and I use Adobe Photoshop Elements to download and organize my digital photos. After the update, I uploaded some photos from my wife's phone and my phone.
However, when I try to download from my Nikon DSLR (D60), I get the error that there is no supported media on the disk. I recognizes my camera - it seems. However, it shows nothing on the file explorer in PSE13 nor in the W10 file explorer. However, the same program on Win7 on a different computer recognizes them and downloads them without issue.
Why the folder where the photos are is what opens up when I plug in a usb camera and not the photo app. I have autoplay enabled and photo as my default photo viewer.
View 2 RepliesThe Camera worked fine on my tablet which was earlier on Windows 8.1. But, after updating to Windows 10 Home, it gives me an error - Make sure your camera is connected and not being used by another app. I tried the following :-
1. Updated the app.
2. Turned Windows Firewall off.
3. Tried disabling and enabling the Camera - OV2680.
My computer with Windows 10 no longer recognizes my Hero 3+ GoPro Camera, nor my Nikon D5100. I have looked for drivers, but to no avail. Any way that I can pull pictures/video off these devices and put on computer?
View 13 RepliesOne of the Best features that I miss about XP was being able to download 'Selected Photos' from my Digital Camera.
Now its All or Nothing, which means I have to go to my Photos and then delete the ones that I don't want.
I am using a Dell latitude E6400 that was on 7 and now on 10 and since uploading 10 I can not upload photos from me card reader or my camera a Cannon 400D to my pictures.
I use Flickr as a image hosting site and on there when I want to get the image code to post a photo on to a forum I can no longer get the code as when I select the photo and click the share tag as the dropdown comes up the image code bar slides off to the left not letting you click it to use it , will this be a windows problem or a Flickr problem ??
I am a bit of a Old luddite (69) and find this all very confusing and disappointing for what is supposed to be the most tested system they have ever launched ?
I just 'upgraded' to Windows 10 yesterday from 7. Windows 7 has a generic photo upload program that activated when I hooked the camera up. Windows 10 does not recognize my camera in G drive.
Is there a generic program available to upload photos? Samsung support says they do not support Windows 10.
How to make the Pop UP appear in Windows 10?
View 1 RepliesNeed to make a ext4 logical partition but it is allowing only primary:
View 9 RepliesI just bought a HP Stream x360 yesterday and upgraded it to Windows 10, the issue is that the touchscreen will no longer work. It worked with 8.1 but not with 10. I have checked with Windows Update and installed all of the updates. I have also checked with the HP driver support to see if any needed to be installed and it said none (if I did it right).
View 9 RepliesSo last time I Disabled the head phones in the Sound>Playback device list and after that I couldn't see them on this list anymore (Even when checking Show Disabled Devices) I already tried Updating the Driver in Device Manager>Sound,Video and Game controllers>(HeadPhones)>Properties>Driver and it still didn't work , I also tried Re-Installing them from computer and Restarting the Computer and nothing worked. I don't have any panel jack Disable front detection option in Realtek HD Audio Manager
I'm on Toshiba Laptop, Windows 10 and using Logitech G930 HeadSet. No hedphones nor microphone are enabled , and i can not change it.
I recently upgraded from windows 7 to windows 10. My mouse worked fine in windows 7, but it does not work in windows 10. Without my mouse to work with, I am lost on the computer.
Information from the Control Panel (System) is as follows:
HP pavilion dv5 notebooselectk PC , windows 10 Home , 64-bit operating system .
The mouse that I have is a Rocketfish Nano Laptop Optical Mouse.
Information from the Control Panel (Harware and Sound) (Devises and Printers) shows an icon
of the RF Nano Laptop Optical Mouse.
When I select the icon , there is information at the bottom of the page that reads:
RF Nano Laptop Optical Mouse Status: Driver error
Model: Rf Nano Laptop Optic...
Category: Mouse
Status: Needs troubleshooting
More info from the Control Panel (Hardware and Sound) (Devises and Printers) is taken from the Mouse link.
The (Hardware tab) in the Mouse link shows two different types of mouse.
One is a Pluralinput Mouse 0.8.2.0 and the other is a Synaptics P/S2 Port Touch Pad.
The Pluralinput information reads:
Manufacturer : Pluralinput
Location : on RF Nano Laptop Optical Mouse
Devise status : This devise cannot start (Code 10)
I was trying to add a printer and I had the message that the printer spooler don't work! I tried 3 different ways manually via command prompt and via windows devices system and force start automatically but nothing. it cant start. Some messages i got trying to fix it it was there are no resources for this operation!
View 1 RepliesI have an Acer Aspire V17 Nitro laptop (i7, 16 Gb RAM) which I am using with an external monitor (through the built-in HDMI port).
I recently purchased a USB to HDMI converter so that I could have a second external monitor. This was advertised as being applicable for Windows 7 and 8.1 systems so I figured it should work for Windows 10 also.
Unfortunately when I installed the software, the system crashed. Eventually I managed to restore it to an earlier point so I managed to get the system back to normal. However I cannot seem to be able to find any way of getting this device to work on my laptop. I tried allowing Windows to find the best driver, and even tried a third-party driver that I found on the internet but to no avail.
When I contacted the supplier he said that he had written to his own supplier about this but got no reply, so he offered me half of what I had paid for it as a refund. I accepted this but would really like to be able to use the device.
I've read that if I install an older driver it should work. But I seem unable to even get an older driver to install.
I'm on Windows 10 Pro.