How To Know If Download Is Complete
Aug 2, 2015
Yesterday, I downloaded the Win 10 upgrade to a flash drive. My plan was to use it first on an older Win 7 computer that isn't used much. Then, if successful, I would do it on my husband's new Win 8.1. It seemed to take forever and I didn't even think it had downloaded to the drive. But it did, and after lots of time, the Win 7 has Win 10.
Problem is, in the midst of downloading, it said that the administrator had to be signed on to continue, so sign out and switch users. That was hard to figure out, but I did it and now I don't know if the download is complete. Can I unplug the flash drive? I think I'm also an administrator and should be as I'm the only one who uses it. Is there a way to check if it complete?
Other question: Can I use the same flash drive to upgrade the 8.1? I think it's 64 and the other is 32. Should I just erase the flash and download the upgrade again?
View 6 Replies
Similar Messages:
Aug 12, 2015
Afrer 2 days 4-5 times download failure this time download completed...
But when i click on"ok lets continue" button it shows"working on it" and nothing happening since hours
View 3 Replies
Oct 31, 2015
When emptying the recycle bin there are always about 10 - 15 items left showing in the folder. They are not actually still there because they usually disappear after I refresh the folder. With the recycle bin I could just assume they are gone and if necessary I will get rid of them the next time but this also usually happens when I try to move or delete a large number of files and it is a PITA having to make sure the total move or deletion has completed successfully. What happened to the auto refresh on completion of an operation to show the actual final state of the relative folders ? It is beginning to seem that Win 10's improvements and advantages are coming with too much aggravation .
View 5 Replies
Dec 27, 2015
SFC stops at 22% and cannot complete.
DISM returns "The specified buffer contains ill-formed data."
RESOLVED via a Windows 10 refresh second attempt that succeeded after the first would not allow files to be retained.
After again creating an ISO file, the second install resulted in retained files and no SFC errors.
View 1 Replies
Oct 9, 2015
I have a surface pro 3 and I am trying to do an in place upgrade to 10. Both OSes are Enterprise versions. The install goes fine and eventually gets to a point where it will revert back to windows 8.1 with the following error: 0xC1900101-0x40017.
Small background on the machine: It is running windows 8.1 ENT, SCEP for virus scanner, is on a domain, has been originally imaged using SCCM
Here is what I have tried to get this error gone and get 10 installed:
Clean boot
Disabled all startup items from task manager and all services not marked as Microsoft
DISM /online /cleanup-image /checkhealth (succeeded)
DISM /online /cleanup-image /scanhealth (succeeded)
DISM /online /cleanup-image /restorehealth (Failed)
Ran via command prompt and all succeeded
net stop wuauserv
[Code] ....
found corrupt files but couldn't fix them.
Running offline scan not but I don't know that it will change the result of the online scan (done this before on other machines)
Tried running from local machine via extracted ISO (Failed)
Tried running from USB3 Thumb drive via extracted ISO (Failed)
View 3 Replies
Nov 22, 2015
It turned on from a complete shut down.
View 1 Replies
Aug 27, 2015
I try to open a zip file in "File Explorer/Windows 10" with double click on, but it is no working. I'm trying with right mouse click to "extract all", and I have got the error:
Windows cannot complete the extraction. The compressed zipper Folder XXX is invalid.
View 8 Replies
Nov 16, 2015
I recently upgraded from windows 8 to windows 10. but ever since I have a problem. I shut the computer down (start bar, power and shut down) and at some point a few hours later the computer starts up again on its own but I haven't changed anything so can only pin point it to the upgrade.
View 7 Replies
Jan 4, 2016
I've got a Sony VAIO and it took a while for them to update all of their drivers, but they finally did in November. The update went pretty well and I've had some minor issues, but nothing ongoing... EXCEPT, about once a week, the system completely locks up. I think every time it's happened, I've been using Chrome, but I'm not certain.
I upgraded from Windows 8.1 64-bit and now have Windows 10 Home 64-bit.
View 5 Replies
Aug 4, 2015
Windows 7 to windows 10 killed my windows 7 install.Is there a way to do the upgrade with out a complete install of windows 7.Using the windows 7 Lic Key.
View 3 Replies
Feb 20, 2016
I've just got this computer back and its crashing at Random times, I cant figure out why though and it shuts off with no fanfare and no warning, one second its on and the next its off.
I think.. THINK its related to doing stuff, cause when i play a video game, it happens but when i leave the computer alone and don't touch it, it can remain working, but its blinked off from seemingly small stuff like browsing and such, just less commonly so.
Anyway I don't know how to diagnose the issue, thought it might be a problem with my power supply so i upgraded from 400 to 500 but.. nope that didn't do nothing.
View 7 Replies
Oct 20, 2015
If I was to make a complete image of my system warts and all. What would be the best way to create it?The media creation tool kit or something else?
View 7 Replies
Sep 16, 2015
Got a new Dell laptop today that came with W10 pre loaded. Have installed dropbox, and spotify and AVG. Rebooted it a couple of times during all this and all seemed fine.
Now when it is switched on it shows the login screen and I enter the microsoft account password. It shows the desktop wallpaper, and the desktop icons, but it does not show the taskbar icons or the clock in the notification area. It shows the mouse pointer, which can be moved with the touchpad, but neither left nor right mouse buttons have any effect. The keyboard is unresponsive (despite working 5 seconds earlier to enter the password) so Alt-F4, Ctrl Alt Del and Windows key have no effect.
If the pointer is moved down to the taskbar it changes from the default arrow to the 'busy' circle, but after leaving it for half an hour or so, there is no progress. The only route I have found out of this is to hold the power button down to force a shutdown. When I power it back on the login screen appears, and I can move the cursor, type etc and everything seems normal. When I enter the password and login, I get the same thing again - wallpaper, desktop icons, but no clock and then no further response.
I got into safe mode and selected 'recover from restore point'. This failed (when did it ever work!?!). The laptop rebooted and then went straight into the initial reload i.e. asked for country, language, keyboard type, etc etc seems I have lost everything.
View 1 Replies
Dec 19, 2015
I run a scan but as soon as I have rebooted and within an hour or so it asks me again? I receive the notification in the taskbar and Windows Defender turns orange and states I am unprotected. So far I have completed 3 clean scans today but after a reboot it is as if it does not remember that I have run a scan. I am running the latest Windows 10 pro.
View 4 Replies
Jan 17, 2016
My Windows 10 computer has been freezing/crashing frequently recently (HP Pavilion 500-123ea). I got some good advice to try running the sfc/scannow diagnostic process to try to resolve the problem. However it gets up to about 56% and I get an error message: 'Windows Resource Protection could not perform the requested operation'. And there's no elaboration beyond that, so I don't really know what's going on.
The computer is continuing to freeze/crash in Word alone (no Web) and while browsing eg on Yahoo, Yahoo Mail etc. I've run PC Health Advisor software which suggests it's not fragmentation, nor RAM, nor registry issues, and the monitor looks OK.
This might seem like an obscure problem, but I think if it could be resolved it might stop my system from crashing, so I don't know. I should add that I tried 'Dism' and that's OK.
View 6 Replies
Dec 3, 2015
When I go to Windows updates the system will not complete loading
View 3 Replies
Dec 6, 2015
I have a gaming laptop. Recently after updating to w10 november update, i have noticed that my laptop sometimes turns itself on after a complete shutdown. It usually occurs 2 seconds after complete shutdown. Ive checked if maybe it was a battery issue but nothing is leaking. I have not opened my laptop yet but this is the only problem i have. Is there any software to check what could possible cause this. Also my laptop never boots itself up while in sleep either connected to charger or off charger so its safe to say it only occurs when i just fininshed using my laptop.
View 1 Replies
Nov 7, 2015
I want to save this Old windows XP file. It has been updated / untouched and want to keep it. Its around 10 GB big how do I make it to a bootable dvd is this even possible?
I'm on windows 10.
If you don't see it here [URL]....
View 1 Replies
Aug 12, 2015
I have a custom built computer with the following relevant internals:
Intel Core i5-3750k Ivy Bridge Quad-Core 3.4GHz (3.8GHz Turbo)
ASUS P8Z77-V LE LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
G.Skill Ripjaws Series 16Gb (4.4GB) 240-Pin DDR3 SDRAM DDR3 1333
ASUS HD7850-DC2-2GD5-V2 Radeon HD 7850 2GB 256-Bit video card
Samsung 840 Pro Series MZ-7PD128BW 2.5" 128GB SATA III Internal Solid State Drive
I was using Windows 7 with an external wifi adapter for internet access and the computer was perfectly fine. Upon upgrading to Windows 10, I instantly ran into issues that quickly grew worse. From the get go, I was unable to utilize anything on the taskbar, including icons that I placed there like Chrome and the newly installed Edge. The search bar was likewise inaccessible and now, after multiple restarts, I can no longer use the Start button with either mouse or keyboard. The internet icon on the taskbar will not work and even when attempting to access the internet after hitting ctr+alt+del, I find that the computer cannot even detect a connection, even though I know it should be able to. After a few minutes trying to mess around with other fuctions, the entire computer basically freezes and the entire computer locks up forcing a hard reboot.
Pictures and videos will not load (I can click on the My Computer icon on the desktop and access everything there), the computer telling me the files are corrupted. Same goes for documents, and games will not launch (Steam obviously cannot connect).
For lack of a better term, this issue is... weird. It's like I only have selective functionality over certain programs, although its selective enough that it has basically rendered my PC useless. I cannot even figure out how to uninstall Windows 10 because I can't access the Start menu.
View 1 Replies
Feb 9, 2015
There must be a way around ...?? Assume I understand the risks.
View 3 Replies
Jan 16, 2016
Fairly new to PC building. I built my current PC with windows 8.1 and it ran OK until I upgraded to windows 10 then it would just freeze and everyone in awhile Bsod different errors but mostly DPC_WATCHDOG_ERROR. other problems the USB, mouse, and keyboard slots will randomly freeze forcing reset.
View 3 Replies
Sep 3, 2015
Randomly getting a BSOD while gaming, or sometimes at complete random. What this dmp file points too? tried to do some research on the hal.dll driver, no specific luck on what could cause it.
==================================================
Dump File : 090315-59843-01.dmp
Crash Time : 9/3/2015 6:33:19 PM
Bug Check String : SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x1000007e
Parameter 1 : ffffffff`c0000005
[Code
View 1 Replies
Feb 10, 2016
I'm writing this before having to do a complete wipeout of my system
Specs:
Lenovo Y510p
Hybrid HDD (Seagate) 1TB
m.2 SSD (Trascend) 256GB.
So, since build 9841 I've been using Windows 10 Insider Preview (IP) as my mainly driver. Until the recent redstone builds, Visual Studio has been plagued with problems (From Windows Universal Apps Development to ASP.NET) . I've installed Windows 10 IP in the SSD and have been using it very happily since I've had no major issues, until the ones I've outlined before.
In my Hybrid HDD I had Windows 10 RTM (10586) installed and didn't use it for a quite while (3 months). When these problems rose, I decided to start using that partition again, but out of the blue it decided to start giving me some serious problems: mostly, the whole XAML interface (Start, Volumen, Sound, Battery, etc.) didn't show up. After trying some fixes (From reinstalling Windows Apps to Creating a separate user), I decide to refresh the bits. Unfortunately, even after refreshing my machine didn't fix the XAML interface problems and even worse: I got no possibility to run Universal Apps.
I went and ran some hard disk checkups, from both: the Lenovo Utility and CheckDisk and none threw an error.
The actual problem: Yesterday (Feb. 4) I decide to clean install Windows 10 Build 10586 64-bit in the Hybrid HDD partition (without deleting the OEM reserved spaces) and I'm stuck now on Finalizing the settings. Is there a way to fix it? Tried hitting Shift + F10, but in that specific screen it does not work. In previous screens there are no anomalies.
As last resort I must wipe out everything in both drives and start from zero. I would not like to do that, since Visual Studio is so tough to install (takes too darned long). Is there a way to resort to an alternate method?
View 1 Replies
Aug 29, 2015
After maybe 10 minutes, I get a complete freeze and I need to restart my computer. After many attempts of restarting, it usually works fine if it doesn't freeze in the first half an hour. I attached the log.
View 9 Replies
Feb 10, 2016
I have 4GB of DDR3 ram on my laptop. When I go into the task manager to check how much ram is being used, it says only 795MB and yet it also says that 94% is being used.
This is always the case, of course with varying numbers. The memory usage shown does not coordinate with the percentage, but the computer performance certainly correlates with the percentage.
When I check in cpu-z, it does confirm that the 4GB are all installed. What is going on here?
Updated with pics:
I missed the performance tab which does indeed show all of the correct total amount of ram being used. Now how do I find all of the individual processes and services using those resources?
View 9 Replies
Aug 22, 2015
On the new Edge browser how in the world do you clear select autocomplete entries?
I can highlight them with the arrow keys but have now clue how to delete individual autocomplete entries.
I know that you can clear all under the settings but I only want to delete certain ones.
View 2 Replies
