Installation :: Cannot See Bottom Of Screen On NetBook After Upgrade
Aug 7, 2015
I just upgraded to Win 10 on my Acer Aspire One netbook, but cannot get the bottom of the display to be visible. The start button/task bar is off screen, and I cannot find a way to fix it.
The native display of the netbook is 1024X600, and display was set at 1024X768 in Win 7, and worked fine. Now, even if I set the display resolution back to 1024X600, the icons just get bigger, and the bottom ones are mostly off screen.
I even tried 800X600, but that was just worse.
Without the start button and task bar, it is hard to try anything.
Upgraded from Windows 8.1 to Windows 10. The Installation went ok but when it got to the desktop my screen kept blipping or stalling out, my icons at the bottom of my screen and on the desktop kept disappearing and reappearing, my ICloud is giving me some weird message about how I don't have the privileges to access the folder...oh, and I cant click on an of my folders either...Anywhere between 5 min to 25 min is how long it takes for my computer to finally Stabilize itself and then everything works fine....It seems like it is taking longer to Stabilize...My computer is fairly new...I bought it in June of 2014...It is an HP Envy 23 All in One.
I have an AMD 6670 and I just upgraded to Windows 10. At first I couldn't set my resolution back to 1920x1080 but I downloaded the driver and now I'm able to. The issue is that when I set the resolution, it's like everything is stretched out. The taskbar is off the screen on the bottom and same with the icons on the top and sides of the screen. I can see the very top of the taskbar at the bottom, but not enough to click on start or choose any programs that I have open.
I upgraded my monitor recently to a Dell 4k display. The issue/niggle I have is that the task bar at 4k resolution and relevant scaling within the Display properties is only showing on 50% on the bottom of the screen which is annoying...
I have a Lenovo Thinkpad Edge with an Intel I5 processor, 64 bit with no hardware upgrades (stock). I had accidentally stepped on the screen (fell off my lap and then crunch) which was mangled beyond repair, so I have been using it similar to a tower, with a VGA and/or HDMI connected monitor (my HDMI cable went bad, I picked up a new cable but hadn't hooked it up to the second monitor. I started my free upgrade from Windows 7 Home Premium to 10 last night. I woke up to the black screen/mouse pointer issue which is what brought me to this thread. I tried the recommended fix:
1. Hit ctrl, type in password and enter 2. Win Key + P + Down Arrow. (Win Key + P only seems to do the same thing)
This brought up options to
1. Disconnect projector (Tried this and lost connection to the VGA even after reboot) 2. Duplicate (Screen is still black with mouse cursor, but I saw a little bit of red and blue pixels at the bottom where the task bar should be until I disconnected and re-connected the VGA, then it was back to black screen and cursor) 3. Extend (still black screen and cursor) 4. Connect Projector (still black screen and cursor)
I'm not sure what to do. I must have some OS installed, because I am able to also perform these operations from my USB Keyboard/Mouse. I'm just not sure how to get Windows back on my VGA connection (I haven't tried HDMI because I did not have it connected when I ran the update.) I thought Duplicate displays would do the trick, but apparently not. For as beat up as the laptop is on the outside, the hardware performs fine. I also have a 2nd laptop (work laptop, also a Lenovo W541) that I can use if any solution involves downloading something bootable.
Task bar is set to auto hide and is at the bottom of the screen. Everything works Ok until computer goes into sleep mode and when I wake it up the task bar will not reappear until I either reboot or open task manager and restart Windows Explorer. Everything then works until the computer next goes into sleep mode when I have to repeat the process. However, if I move the task bar to the left side of the screen it keeps working after being in sleep mode. I don't have to reboot or restart Windows Explorer like I do if it is at the bottom of the screen. It's quite an annoyance to have to restart Windows Explorer and it is also an annoyance trying to keep the task bar on the left of the screen since I had it placed at the bottom for so many years.
So the bottom of my monitor display is cut off. It is a Dell ST2010 monitor very old but still in working condition. It has nothing to do with screen resolution btw.
This is how it looks now, the problem started occurring like 3 months ago
This is how its suppose to look when i take a screen shot of it
I've done some looking up on what the issue is, and I believe that it's something commonly referred to as "sticky corners". There is a few pixels space on the bottom and top of the screen (between both monitors) which does not allow mouse movement from one screen to the other. To get the mouse to the other screen, I need to drag the mouse down about a centimeter and then it moves across to the equal position on the other screen (not the very top, meaning that it's not a scaling issue). I drag windows around constantly, and they keep getting stuck in the top or bottom of the screen, and it's quite distracting.
As you see in the screenshot that I've attached, the small red line is where the mouse simply refuses to move across, regardless of the speed of the mouse.
This was apparently a feature in Windows 8.1 as well, which there was a solution for by messing around in the registry editor, however this is no longer the case in Windows 10 (the files which used to be edited are no longer there in 10).
When my computer wakes from sleep mode an annoying black icon which looks like a "sleeping eye" with a line through it appears at the bottom of my screen. How do I get rid of it???
In the new windows 10, I notice that I suddenly have to back and forth between two levels on my bottom tray, to find the icons that I need. How do I get ALL the icons that I need, first of all, and then, how do I get them ALL on the same level?
I have an Asus x205at netbook with windows 8.1 installed. I have installed windows 10 preview via windows update . windows 10 runs terribly slow and jittery on my netbook.I have tried to rollback to win 8.1, recovery options etc but none of these options work all say they have encountered a problem.
i have installed the wifi driver but can not pickup any WiFi devices. my usb will not detect a usb modem.I have created a uefi bootable usb with a windows 8.1 64bit install but it will not install 64bit to my system as the cpu is 64bit but the efi is 32 bit. I tried with a 32bit win 8.1 but 32bit is not supported by microsoft with uefi install.
I upgraded from Windows 7 to Windows 10 at the first opportunity on July 30 after registering with Microsoft. The upgrade appeared to progress smoothly and I was able to boot the computer to see the new desktop screen. However, very soon after this first boot, the computer asked me to restart to finish the upgrade. This I did and my computer has since been rendered unusable. Every time I boot, the computer gets stuck on the welcome screen. It displays the generic circular user icon, with my name written underneath and the word "Welcome" written underneath this. The animated "computer working" icon (the little dots which rotate again and again) is displayed next to this. However, it never goes away. I left the computer for 12 hours and nothing changed (the little dots kept on rotating all the while). The computer otherwise appears fine (ie. the multimedia buttons at the top of the keyboard work fine) but the OS cannot get past this screen, no matter what I do.
I have unplugged all USB devices. I have tried booting with the power cable in and out. I have gone into the Advanced tab of the setup menu and disabled (and re-enabled) things like Bluetooth and Wi-Fi top test if this makes a difference. Nothing does. As things currently stand, I am completely unable to use my computer and all my files are stranded. Several of them are desperately needed.
I have tried pressing F8 to boot the computer in safe mode, but this doesn't seem to work (it results in a back lit but otherwise black screen).
A friend upgraded their computer (HP Compaq 6710q) to Windows 10 recently. It boots up ok, but after about a minute the screen starts flashing periodically. Nothing can be done or executed on the computer.
After installing Windows 10 - on the first login screen, when I enter my password pc is freezing up, after a few seconds it fades to black and then restarts. Cannot get past this part. The PC I'm upgrading is a Dell Inspiron laptop upgrading from Win7.
I downloaded the MediaCreationToolx64.exe to upgrade to windows 10 but it failed at 83%. An blue error screen appeared with . I wasn't even able to read the error because my laptop shut down.
So I tried upgrading to windows 10 again but now it requires me to give a product key. I tried to put my windows 7 product key but it does not work.
Trying to upgrade from windows 7 to 10 I get unable to upgrade, Screen driver incompatible (old dell Laptop). So i created a Windows 10 iso and installed windows and lo and behold the screen works perfectly - now the problem is I can't activate as I can't upgrade so I don't get a windows 10 Key !!!!!!
I upgraded from windows 7 ultimate to windows 10. It seemed to install okay and asked me to log on and select setup preferences, which I did. I left it alone to finish setup and it went to sleep. Now I only get a black screen with an active cursor. I've tried multiple hard restarts, entering logon blindly as suggested in other posts and using windows key-p to switch monitors all to no affect. Ctrl-alt-del has no effect. I cannot bring up any screen and so cannot start in safe mode or download video card drivers. I do not have Windows 10 on media.
For a couple of days, I am trying every solution from this forum, for windows 10 upgrade on my laptop Dell 15 L502x (early 2011) with windows 7 Home Premium. I tryed via Windows upgrade system tray icon (after restart - black screen,mouse pointer), then I tryed wit ISO on dvd/USB, same problem. After that I have disable one graphic card, then another, in both cases, same problem. Every time(when black screen come) I tryed with CTRL and then type password - no result. I have updated all my drivers, all updates are downloaded,
Having issues with certain icons not staying at the bottom when I put them there. It all started after a windows 10 update some time ago. One day I fired up my laptop and noticed that some of my icons that I had at the bottom of the screen moved up. Tried to move them back and they went right back to the next row above. Did some searching and found suggestion moving the text size smaller and that worked, but now all of my icons are tiny.
Okay, last night I was playing fine on my built PC with windows 10, everything worked and nothing was wrong. But when I started it this moring it was greated by an unusually long lasting black screen on startup and was only able to see my mouse. That's problem #1. Now I bypassed this by hitting space bar and entering my password to log into my computer..After logging in I see that all of my icons on my desktop are gone. I tried to open chrome from my taskbar and the taskbar shows that its open but noting appears on my screen when I try to acess it. This is the same with all of my apps.
I also can't see any of the icons on the bottom right hand of my desktop either .(such as the wifi signal and the volume mixer) I can hit my windows button and can navigate a menu that's is contained in that box. But can't open anything. I've tryed restarting, ctrl alt del only brings me to another black screen.This is my full build. I have had no problems with the computer before today.
