Installation :: Couldn't Update System Partition - Can't Install
Nov 18, 2015
Does not meet system requirements
Get Important updates: cleared.
Gets windows 10 ready but then it
Checks requirements:
Windows does not prompt any choices,
We couldn't update the system partition
Dialog crashes.
Does not allow one to choose which partition
Gateway Nv59
64 bit Intel 430m Duo core
Windows 7 Premium
500GB hdd
8GB Gskill ram 1333mhz
Take note here that I cannot merge any of the disks, they all result in error or System lock. I can't make the 35MB system disk larger, but Easeus, Windows disk formatter and some other major ones I've tried just say No. But the problem is windows 10 doesn't give me the choice to overwrite the C or H which is quite large enough.
Take note that i just used the SAME flash drive to boot/install windows 10 to a friends lower spec Intel i3 laptop with 1/2 as much ram from Win 7 BASIC. Don't tell me It's not powerful enough..
This is the 2nd system (my wife's computer) we want to run Windows 10. Currently that system is running windows 7 Pro. The first system system went without a single hitch and it was running windows 7 Pro as well.. The download was complete so I was ready for the upgrade. I started the installation and the first thing I got the comment "We couldn't update The System Reserve Partition". I cannot find any documentation on this message.
I have googled this issue a lot and I see a lot of things that can be done but I some are not working. My partitions look different so its a little strange. When I try to upgrade to 10, I get the error message "We couldn't update the system partition". I had an older SSD that like 120GB. I filled it up so I put in a bigger one. My computer says it's 465GB. and almost half full. I ended up using Samsung disk magic or something like that which copied everything from the old SSD and put it on the new one. I think when it did this, it created some different partition.
I added an image of my partitions. Both C and D are SSD's. C being my operating system.
I am confused as to which partition windows 10 is trying to install itself on and what exactly is on the data partition. If I right click on the data partition, the only option I have is to shrink the volume.
I'm using win 7 at the moment and I want to upgrade for DX12 but anytime I try to it just says "We couldnt't update the system reserved partition" My reserved partition is 100mb and I know you need something like 350mb or something like that but I cant figure out how to get there. I'd rather not to a clean install if that's at all possible.
I have a Vaio laptop and migrated my factory Windows 7 install to an SSD about a year ago, which apparently left me with no system reserved partition. I used these instructions to create a new system reserved partition, but I'm still getting the same 'Couldn't Update the System Reserved Partition' error when trying to start the Windows 10 upgrade. What else I can do to get the upgrade to work? I really don't want to do a fresh install of Win 7 (assuming that would even work). My diskmgmt screenshot is below.Also found this thread on reddit , but not sure if that really applies to my situation.
The update automatically tries to install but I keep getting this. It says Windows 10 couldn't be installed. We couldn't update the system reserved partition. Several times I got error code: 8000FFFF.
I'm trying to update a Dell Optiplex 780 with Windows 7 Pro. SP1
I really wanted to upgrade to windows 10 but I get an error saying that my system reserve partition could not be updated. Ive looked on tens and hundreds of threads and forums and they say to increase the partition size from 100 to 350. Except i dont have a system reserve at 100mb. This is my disk management. URL...
couldn't update the system reserved partition error....every time before downloading win10 while checking system requierments, i am on a windows 7 pc .... Also when it comes to free space i think 33 gigs are enough
System stats...Athlon 860K, Asus A55BM-E, GeForce 550Ti, 8GB Ram
Win 8.1 was installed from retail DVD onto a virgin 500GB mechanical HDD. I upgraded shortly after to a Samsung 840 EVO 120GB SSD and cloned the mechanical drive over, tested, and then formatted the mechanical drive for data. I got some real strange (to me) drive partitions - 100MB 'Data' drive which is almost full (cannot access) and a 350MB 'System Reserve' drive. The mechanical drive is a separate letter and all seems to work swimmingly. I sort of assumed this was normal.
Upon installing WinX I get the above error...from what i've read, people are having challenges moving from Win7 due to the fact that this reserve drive is only 100MB and it needs to be 300-450...well, mine's 350mb so not sure what gives.
I originally made a USB key which booted fine, but could not install on any partition on two different PCs and 4 different drives. It gave the error message "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files." Tried different hard drives/partitions even a completely blank drive.
Did the usual wipe all partitions (on the two drives that are blank). I re-ran the MediaCreationToolx64 to make an ISO and now it is installing correctly. Is there a US English location I can download somebody's image of their USB drive or just try the 2 hour download again?
AND is their an explantion other than something went wrong creating the USBKEY? It is a brand new key (it is 3.0 but the ports are 2.0).
Installed a Samsung SSD on my Asus CM6730-06 desktop running Win7. the Win7 OS was migrated from the Asus Pc to Samsung SSD. Windows 7 boots and runs great off the Samsung SSD. Got a Windows 10 upgrade notice and received an automatic download of Win10 but when it tries to install I get the message "Windows 10 couldn't be installed". "We couldn't update the system reserved partition". A friend used Aomei to create a System Reserved partition but Win10 still gives the same message about the system reserved partition.
Every time I try to update and install windows 10 I get this error. It seems as if my reserve partition is too small to download windows 10. How would I go about fixing this issue. I have had a dual boot of linux in the past but got rid of it months ago.
I am trying to install Windows 10 10130 onto my laptop's blank partition that is 400 GB. Upon installing I noticed it gives me an error that says "We couldn't create a new partition or locate an existing one." I'm not sure what this means, as I have repeatedly formatted and erased the partition to no avail. I do have another partition with Windows 8.1 installed, so I am trying to salvage that and get the Windows 10 installed onto the other one.
For some strange reason. On boot, It asks me to pick either Windows 8.1 or Windows 8, and Windows 8 isn't installed...
This laptop is a mess. I bought it used, and it has only given me issues. Luckily I have my Desktop so it's not like I rely on this laptop.
I had a kali linux installed in my computer. Then I tried to install Windows 10 using a bootable USB drive. (I created it by downloading the windows 10 ISO and then creating USB drive using Rufus.) But when I was trying to install windows 10, it shows my hard drive, but it doesn't installing to it. Error message is the following:
Code: We couldn't create a new partition or locate an existing one. For more information, see the Setup log files. Then I checked for the log file (X:Windowspanthersetupact.log) It has this message:
Code: LogReasons: [BLOCKING reason for disk 0: CanBeSystemVolume] The selected disk is not the computer's boot disk I know that right ? USB disk is the boot disk here. Then I searched in the internet for a solution.
I came up with this: [URL]...
I followed all the instructions there. Cleaned my hard disk using DISKPART and formatting and stuff. Then I rebooted my machine. But, still it shows the same error.
I was trying to install windows XP in a dual boot with Windows 10, so I created a 40 gb partition and tried to install Windows XP onto it. When I booted up the Windows XP install disk it couldn't find the partition I created because the partition didn't have the proper ntfs header that would have given the drive a Letter (like how the C:// drive is). I then tried to boot back into Windows 10 to use disk manager to format it, but since i inserted the Windows XP disk, Windows XP already overloaded Windows 10's bootloader. So basically i could boot anything. I tried to format the partition with gpart, didn't work... Kept formatting ntfs but without the letter. Tried using Ubuntu, kept giving me errors... I still can't boot into Windows 10 because windows XP overloaded the Windows 10 bootloader. And I can't install XP (on the separate partition ) because it isn't mounted with a letter. The only way that I found to fix this is to find a way to install XP (<--- that's the part I can't do ) then to use a special software on XP that will let me have a multi-boot system, and will fix the Windows 10 bootloader.
I am trying to install windows 10 via USB on my HP Pavilion G6 Laptop, I deleted the hard disk partition to create new partition, but now when I select that partition, it says that Windows can't be installed on this drive as it is GPT partition. I enabled Legacy boot, still it gives me same message. I tried to create a new partition, it says that it will check to ensure that windows feature works properly and upon clicking OK, it gave this message after a minute : We couldn't create a new partition. Error 0xbdba5840
Installed a Samsung SSD on my Asus CM6730-06 desktop running Win7. the Win7 OS was cloned from the Asus Pc to Samsung SSD. Windows 7 runs great off the SSD. Got a Windows 10 upgrade notice and received an automatic download of Win10 but when it tries to install I get the message "Windows 10 couldn't be installed". "We couldn't update the system reserved partition". I would like to upgrade to Win10 on this pc.
I have an SSD with WIN7 installed. It has no System Reserved Partition (SRP) and thus no boot files on that nonexistent partition.
I've read here that individuals with a SRP of only 100mb have had issues installing WIN 10 and that those issues were resolved by expanding the SRP from 100mb to 450mb.
Will WIN 10 install if I have no SRP? Will it merely alter the boot files on my C drive?
When I try to upgrade my Dell XPS 15 running Win 8.1 to Win 10 I get a message "we couldn't update the system reserved partition", I only have an EFI system partition, not the 100MB DATA partition I've read about.
I did a clean install on a new SSD that I had previously formatted and neglected to delete the partition ending up without a MSR partition. I've already installed lots of applications so starting over would not be something that I'd want to do. What are possible problems that I could be looking at going forward?
I created a dual boot system quite some time ago and all was well until.RTM partition was completely up-to-date. I had recently updated to Windows 10 Build 10251 on the Insider partition.I turned the machine off on Sunday January 31, left town, and returned Saturday February 6. All was well with the dual boot when I turned the system off before leaving. When I turned the system on last night, it booted directly into the Insider Partition. There seems to be no option to boot into the RTM partition.
