Installation :: Setup Cannot Continue Due To Corrupted File Build 14251

Jan 28, 2016

I grabbed the install.esd from the upgrade from 11102. Created an ISO using DVD and USB. However, I get this "setup cannot continue due to a corrupted installation file". Tried going back to 11102 and repeated the process three time. Still same thing. (I have grabbed the install.esd file before and after the installation but it didn't make a difference. I'm trying to do a clean install by the way. Otherwise I just have to live with the updated OS.

View 3 Replies

Similar Messages:

Installation :: PC Is Turned Off For A Long Time Setup Tends To Continue Longer Though Eventually It Goes Stuck

Aug 3, 2015

I am attempting to install W10 through USB drive. However as I go through the setup steps, at some point the mouse will start lagging and the setup goes stuck. I don't know if it's a memory problem since I have 3gb of RAM. However if the PC is turned off for a long time the setup tends to continue longer though eventually it goes stuck.

View 3 Replies

Installation :: Fresh Install Using Latest Build - File Explorer Settings?

Dec 10, 2015

I just had to re-install W10 using the latest build offered by the Microsoft Setup Tool because W10 on one machine became corrupted somewhere along the multiple update path! No problems, except it seems that a few of the default settings are a little different than they were in previous downloads. Most are for the better. But...I can't seem to figure out how to turn off the display of all the disk drives in the Navigation Pane of File Explorer. I have five other systems that have migrated successfully along the update path and they don't look like the screen shot attached. What or where is the setting to turn off the display of the disk drives when the "This PC" is collapsed.

View 9 Replies

Installation :: Can't Continue Message Pop Up

Aug 4, 2015

I downloaded the update and got lots of errors trying to install it. I converted the esd file to an ISO and tried to run it from a DVD but get a "Can't Continue" message

View 3 Replies

Image File Corrupted?

Dec 25, 2015

I tried to create a backup image but when I tried to mount it I got this; 

View 10 Replies

Drivers :: GeForce Driver - Installation Cannot Continue

Jul 31, 2015

Just upgraded but now my second monitor isn't working and when i go to update my driver i get this  

View 8 Replies

Fraps Video File Becomes Corrupted

Aug 18, 2015

I record with Fraps and I do Minecraft videos on YouTube. Besides the point. Sometimes, not all the time, but more times than not. When I replay the clip to myself to check it out. It says "Windows Media Player encountered a problem while playing the file" But it only happening for about a second in the file. If I just skip to the second after the part where it stops it keeps playing. I tried running it through DivXRepair, but no luck. It is a really big issue and causes me to loose very good footage because I can't even edit it out because Movie Maker won't accept the files that are messed up.

I can't really call them corrupted because it's only that second it's not the whole file itself. How I record my videos is in 1080p 60fps, and the video file is recorded to a a Toshiba External hard drive through a USB 3.0 PCI Express port. Maybe it's because the file has to travel through that, but I forgot to mention it sometimes happens multiple times on a video making me wonder if it is because sometimes the USB pauses and desyncs stuff and it causes that second to be lost.

View 1 Replies

Corrupted Microsoft Edge Image File

Aug 2, 2015

Out of habit I ran SFC scan after finishing Win10 upgrade & Windows Updates and found out that MicrosoftEdgeSquare44x44.scale-125_contrast-white.png is corrupted.After a quick google search, seems there a few other Win10 users with the same problem.Neither SFC or DISM seem to be able to fix the problem.I also saw someone mention this is a 'false positive' hash mismatch but at least in my case the image really is corrupted (as in, if I open it in a image editor, it fails with corrupted image error). All other Edge images in the folder open correctly in image viewer.

how to repair systemapp files? I'm assuming DISM/SFC fail because the system apps seem to be different from regular system files (e.g. you cannot find them on the install media from what I can see).

View 7 Replies

Can't Upgrade - Download Shows File Has Been Corrupted At The End

Mar 31, 2016

When I am upgrading my windows 8 into windows 10 I am not able to upgrade :( from last two times I download 9.8gb and at the end it shows file has been corrupted. Why it showing this error?

View 1 Replies

The File Or Directory Is Corrupted And Unreadable - Seagate Backup

Aug 15, 2015

I just moved from 64 bit Windows 7 to 10 so I backed everything on my 4TB Seagate Backup Plus external drive. I also have Carbonite so all is not lost if it comes to that. I made a base Image using Macrium Reflect that I still would like to get back though.

Anyway the drive was working fine until I remotely (from my chair downstairs) was doing things on my PC. I occasionally take over my computer remotely if I'm watching tv and remember I need to do something. So I was in the process of moving files from the Backup Plus to Windows 10 that's when the drive locked up. I went upstairs and got on my computer and found out Windows 10 was now not recognizing the Backup Plus. Rebooting didn't work so I shut the drive off overnight and plugged it back in today but now get "The file or directory is corrupted and unreadable".

Disk Management shows ok and I ran Seagate's SeaTools for Windows in "Short Drive Self Test" mode and it also shows 'Pass".

I tried Recuva and a scan showed a lot of files but I'm not exactly sure how to use this... I set option to scan for undeleted files. I then made a folder on my C drive desktop to dump everything but then it says "These file names are too long to be recovered to the selected destination (634). Do you want to change the destination folder." Anyway so where is it wanting me to put everything?

What are the steps (and software) I should be doing to (1) recover my files and (2) what I need to do to use the Backup Plus drive again.

View 3 Replies

Updates :: How To Get 14251 To Appear In Update After 1 Revert

Feb 2, 2016

I wasn't having any issues per se with 14251. However, my dism /restorehealth was broken and I couldn't fix it so I went back to prior build and was going to start over. I rolled back to previous version and it was fixed , but 14251 hasn't reappeared in my upgrade options. Is there some way to fix this or download the ISO?

View 1 Replies

Latest Build - File Explorer Not Showing Progress When Copy Files

Dec 18, 2015

Latest (preview) build - file explorer not showing progress when copying / moving files.

This - unless fixed soon will cause me to revert to previous build. Is it just something with my update. (W10 Pro X-64).

View 1 Replies

Installation :: Can't Boot X64 Setup From USB Or DVD

Aug 22, 2015

Trying to do a clean install booting from DVD or USB created w Media Creation Tool:

Windows 7 x86 and x64 boots from DVD or USB

Windows 10 x86, boots from DVD or USB.

Windows 10 x64, from DVD loads the blue window and then nothing more. Have to switch off/on to get out of it. From USB - nothing, just blank, some HD activity and then nothing, ctrl/Alt/Del restarts

View 9 Replies

Installation :: Can't Run Windows 8.1 Setup

Aug 12, 2015

i have had windows 10 installed on m,y pc since july 30ish....and ever since i upgraded to windows 10 from 8.1 the pc has been locking up every time i try to do anything...something as simple as opening my documents causes the pc to use 100% disk too the point i have to reset......i was hoping i could install windows 8.1 since i still have the key by using the upgrade assistant but when i tried to run it it said "this system is unsupported" and i have tried everything i could think of to fix the 100% disk issue nothing has worked

View 5 Replies

Installation :: Hangs On Setup?

Mar 5, 2016

Every time I try to reinstall Windows 10 it always hangs when I have to input my time zone, no keyboard inputs or mouse registration however keyboard and mouse works on BIOS, this is the screen that I get stuck at:


View 1 Replies

Installation :: Getting Dual Boot Setup

Nov 16, 2015

I was running win 7 (64bit) pleasantly but decided to install Win10, did all the needed stuff for getting dual boot setup.Win10 booted fine, when selected from dual boot menu, but I have many issues on win10, Lenovo laptop is begging for mercy on win10 for many things, my android phone gets disconnected every few seconds if I use youtube, laptop becomes sluggish. USB3 will not install, which worked in win7 earlier.

Fed up with win10, even after disabling driver signature, making sure every driver is correct which I am installing, but this laptop hates win 10 as of now.Now if I choose to run win7, lappy reboots and thats a LOOP. my win7 installation is shown in Drive letter E: while windows 10 is shown in C: What would be the safest way of Re-installating win 7 on E: without loosing the following the crappy win 10 of c:/ dual mode option on win 7 +10

What I want is to run win7 setup which has SP1 integrated and still be able to boot in win10 if I needed later.I have activation keys for both provided by my office which is based on volume licensing.

View 3 Replies

Installation :: Windows 7 Key Invalid For Setup?

Jul 31, 2015

I just did a fresh install of Windows 7 and activated the key, then i installed all of the latest updates. I then downloaded the media creation tool x64 to install windows 10 and when I get to the key activation my key doesn't work.

View 4 Replies

Installation :: Black Screen While In Setup?

Jul 30, 2015

I was in Windows 10 setup using the Media tool. I have reached the step where it restarted then a big circle came up with three parts under saying like "Copying Files" and other two things. Then, suddenly it restarted and only a black screen was there. No cursor, sounds, screen. Now I am installing Windows 10 again but fearing the same will happen again. This is NOT a black screen at the log screen; I have not even finished the installation yet and get a black screen.

View 2 Replies

Installation :: Unable To Run Setup Tool For Microsoft 10

Sep 24, 2015

When trying to open the downloaded setup installer tool from Microsoft?

"Unable to open setup. Quit the tool, restart your PC, and try running the tool again."

I tried restarting as it advised, however, when I tried it again it still said the exact same thing. I also tried deleting the setup tool and starting over again by re-downloading it, but I still get the same error message.

View 9 Replies

Installation :: Cannot Upgrade - Setup Won't Start In Laptop

Aug 17, 2015

Why I cannot run the windows upgrade setup from my USB (G:setup.exe). It is always showing me this error "Use the other installation disc that says 64-bit. When you insert it, Windows Setup will restart automatically."

I also heard that for many people it worked when they run windows setup from "G:sourcessetup.exe" (G: is my USB drive). But when i am trying to open the file it shows Shows setup screen for a few seconds then pops an error "This 32-bit version of Windows cannot be installed to an EFI-based computer. Installation cannot proceed. Use a 64-bit version of Windows to install to an EFI-based computer."

I am trying to run this setup on my HP laptop (Preinstalled: Windows 8 Single Language 64bit) via bootable USB of Windows 10 Home Single Language. I download the Windows10.iso image file via MediaCreationToolx64.exe and created a Media USB disk to install the operating system on the same laptop.

Bootable USB is running setup if i boot my laptop with USB disk. But it will force me to install a fresh Windows 10, which i don't want to. I want to upgrade my current Windows 8.x.

I am sure that i've downloaded correct 64bit version of Windows even i have Windows 10 AIO 32bit/64bit ISO image. Same errors showing in this ISO image too. If i run the "G:sourcessetup.exe" in my PC (which is running Windows 8 64bit) then it runs the process without showing me any error. Why it is happening with laptops only? I also tried to run setup from same USB in my another Lenovo Laptop (which is currently running Windows 8.1 Single language 64bit) but no luck it shows the same both errors.

View 9 Replies

Installation :: Laptop Got Stuck Doing First Time Setup?

Aug 2, 2015

I tried to upgrade my mom and dads laptop and when it finally began upgrading it got stuck doing the privacy settings on first boot after upgrade. I figured it was stuck for good so i forced it to shutdown. Now when booting it goes back to upgrading at the last og the 3 steps and is just stuck there with 0%.

View 5 Replies

Installation :: Setup Hangs On Checking For Updates?

Aug 30, 2015

I am currently using windows 7 64-bit.

I downloaded windows 10 from the ms site (the automatic icon never appeared on my pc), and am using the media creation tool.

All goes fine until 'Getting Updates', when it hangs on 'checking for updates'.

I have tried playing with the settings in Windows update, but suspect the problem lies in there somewhere... my windows 7 was recently proving unable to install all its updates also. I've tried various solutions for that but no luck.

Is a clean install the answer?

View 1 Replies

Installation :: How To Setup A Temporary Dual Boot

Dec 29, 2015

Have my new Win 10 Pro system up and far so good....except for networking ? However...I forgot to keep track of my passwords/acct records...etc for a number of programs on Win 7 that I am putting back onto Win 10...passwords...registrations keys...etc

Can I restore a full Acronis tib of Win 7 Pro and do a dual boot setup with the new 10....and how ?

I know it's not kosher to have both Win 10 new and the older Win 7 on the same PC because of the clean upgrade to Win 10...but I need it a short period to get into Win 7 to recover/find my passwords and registration info for a number of Win 7 installed programs to activate on Win 10

How do I go about setting up a dual boot 'temporarily' to recover needed information for my new Win 10 Pro install?

View 6 Replies

Installation :: Setup Hangs On Getting Updates Part

Oct 18, 2015

I'm upgrading to Windows 10! But it hangs on this part... How to speed this part up?

View 2 Replies

Installation :: Headphone / Speaker Setup - Always Plugged In

Sep 6, 2015

How can i switch between headphones and speaker use w/o unplugging my headphones? I'm trying to leave them plugged in all the time cuz i use them for gaming. My back IO plate has the standard 6 jacks. the board is a z77 mpower. My case has a front audio panel.

View 3 Replies

Windows Installation Freezes At (Setup Is Starting)

Aug 17, 2015

I want to do a clean install of Windows 10.But i have a problem,after the language screen when i press "install now" the cursor turns into a hourglass and the setup hangs.I still can move the cursor but the setup won't continue.

View 1 Replies

Copyrights 2005-15, All rights reserved