Installation :: Stuck At (Preparing Automatic Repair) Stuff

Jul 29, 2015

So I finally made a .iso file for W10 Pro x64 and started installing it. Everything went smoothly my PC restarted 2 times. But when it got to 81% (in total) while "Installing drivers and features" it resterted for the third time and then it started giving me the "Preparing automatic repair" and then "Diagnosing your pc" stuff. I was able to launch the automatic reapair and roll back to W7.

View 2 Replies


Similar Messages:


Startup Logo Stuck - Preparing Automatic Repair

Aug 12, 2015

I just recently got a new pc it had windows 8 but i upgraded to windows 10 it was good for a week until today, I tried to boot it up and its stuck at the windows logo and then it says "preparing automatic repair " and it keeps on beeping. I tried to find bios but i couldn't find it, i pressed every key but no bios. I then put a windows 8 disk but it doesn't have an option to boot from cd/dvd. Msi motherboard ...

My specs:
msi white gtx960 2gb <- gpu
MSI 760GMA-P34(FX) <- motherboard

View 1 Replies

Startup Logo Stuck Then Says Preparing Automatic Repair And PC Keeps On Beeping

Aug 11, 2015

I just recently got a new pc it had windows 8 but i upgraded to windows 10 it was good for a week until today, I tried to boot it up and its stuck at the windows logo and then it says "preparing automatic repair " and it keeps on beeping. I tried to find bios but i couldn't find it, i pressed every key but no bios. I then put a windows 8 disk but it doesn't have an option to boot from cd/dvd. Its an Msi motherboard ....

My specs:
msi white gtx960 2gb <- gpu
MSI 760GMA-P34(FX) <- motherboard

View 1 Replies

Preparing Automatic Repair Loop

Sep 30, 2015

Recently I got a new gaming PC which came with windows 7. The day after i upgraded to windows 10 and it was working fine. Yesterday i was using my PC and then the task bar disappeared so i decided to restart the computer to try and fix it. When the computer turned on again it went through the normal startup process but when it got to the windows logo it said preparing automatic install and then kept looping through startup and the windows logo. I have tried doing the system repair but when I press F8 nothing happens, so right now all i can do on the computer now is access the BIOS.

View 3 Replies

Preparing Automatic Repair Loop - Resetting PC Failed

Oct 24, 2015

I have had this loop for 4-5 hours now, and I have not found any fix for it. I am using build 10240. I have tried reverting back to windows 7, and that failed. Tried start-up repair, that failed. Tried system restore and image recovery, those failed too. Even resetting my pc has failed. I have tried cmd commands, and those also failed. I have upgraded to windows 10 via online from Windows 7, and I do not have a disk or another computer to work with. Nothing has even caused this issue. I just booted my pc like any other day and I was sent into this loop. I have a Gigabyte USB 3.0 powered motherboard.

View 9 Replies

Can't Upgrade To Latest Build - Says Preparing Automatic Repair And Restarts Computer Repeatedly

Jun 16, 2015

I've been trying to update to the latest build for some time now, I'm currently on 9926. The update downloads fine and it also goes through the process of installation fine, up until it's time to restart the computer for the final step, that's where the problem begins. It gets stuck on a boot up loop, it loads to the windows logo and says preparing automatic repair and restarts the computer again and again with the "preparing automatic repair" message. I made an installation disc for 9926 so that's how I'm able to reset the computer but I've also made one for the latest build but I still get the same boot up loop problem. I really want to be on the latest build and I'm worried that I won't even be able to install the official release.

View 1 Replies

Stuck In Automatic Repair Loop

Dec 8, 2015

have an Asus Laptop running Win 10, upgraded from win 7. While reading one of the many links from Facebook, using Chrome as a browser, I got a popup that looked like some kind of ransomware . The popup would not close so I turned off the computer.

Now when I turn the computer on it flashes the Asus logo. Then “preparing automatic repair”, “diagnosing your computer” followed by “repairing your computer” appear. It then tells me that the PC did not start correctly and gives me the option to restart or advanced options. Restart brings me back to this point.

Advanced options gives me three options, Turn orr the PC that does that, Exit and continue to Win 10 that gets me back to the previous step or troubleshoot. Trouble shoot gives me the options to reset or more advanced options.

Reset is either a partial or full removal and reinstall or windows. I have some academic software that I do not want to lose if possible and in any case do not have any media to do a Windows reinstall.

The advanced options gives me six choices.

1 System Restore, but there are no restore points found.
2 System image recovery, but I do not have an image disc .
3 Startup repair, starts the process all over and does not find the problem.
4 Command Prompt, appears to open a working command prompt.
5 Startup Settings, Gives me a non clickable list of options but just continues the loop.
6 Go back to previous build. It warns me that I may lose apps and any changes I have made, but not my personal files.

The System is an ASUS laptop, X54C, made in 2012 with Widows 7 Home premium updated to win 10. I have no other access to the computer.

View 6 Replies

BSOD :: Stuck In Automatic Repair Loop

Aug 7, 2015

I have upgraded from windows 8.1 to Windows 10 The upgrade went well and i was able to use my computer initially. After i restarted my computer, i am stuck in Automatic repair loop.

I have downloaded a copy of windows 10 iso image and made a windows 10 USB boot drive. I tried repairing the startup issue as suggested in some of the forums but no joy.

Its a new PC setup three months ago. Sad there was no hardware or app compatibility check before upgrading.

Config: Intel I7 with 16GB RAM. dual boot with Ubuntu

View 10 Replies

Stuck On Windows Logo When Tried Recovery USB / Automatic Repair

Jun 29, 2015

I have a Windows 10 computer, but whenever I try to turn it on. It just gets stuck on the windows logo. I have tried a recovery USB, but it hangs as well on the windows logo.

When I tried doing an automatic repair, it also hung on the windows logo with Preparing Automatic Repair for hours. I am doing this for my friend, and he doesn't want to loose his important files (yes, i know, he should have backed them up).

View 1 Replies

During Startup Automatic Repair Launches - Stuck In Reboot Loop

Mar 27, 2015

During startup automatic repair launches, restart ensues, that's the loop. The error mssg is WDF violation which it seems is related to iTunes. I just can't get out of this loop to do anything about it. I don't have a boot disc. Safe mode is what I would like, but that doesn't work.

View 8 Replies

Installation :: Won't Automatic Repair Acer Aspire 5560G - Unable To Boot

Sep 23, 2015

run down of errors when i try to do automatic repair:

1.Troubleshoot>Reset this PC>Keep my files> = error: The drive where Windows is installed is locked. Unlock the drive and try again.

2.Troubleshoot>Reset this PC>Removes everything>= error:Unable to reset your PC. A required drive partition is missing.

3.Troubleshoot>Advance options>System restore>= error: System restore: To use System Restore, you must specify which Windows installation to restore. Restart this computer, select an operating system, and then select System Restore.

4. Troubleshoot>System Image Recovery>= error:Windows cannot find a system image on this computer. Attach the backup hard disk or insert the final DVD from a backup set and click retry. Alternatively close this dialog for more options.

5.Troubleshoot>Startup repair>= error: start up repair couldn't repair PC. Press advance to try other options to repair you PC or "shutdown" to turn off your PC. Log file:

6.Troubleshoot>Go back to the previous build>= Windows ran into a problem and wont be able to take you back to the previous build. Try resetting your current build instead(Troubleshoot > Reset this PC).

7. Install>Upgrade>Compatibility report: The computer started using the Windows installation media. Remove the installation media and restart your computer so that windows stars normally. Then, insert the installation media and restart the upgrade.

8.Install>Custom> We couldnt find any drivers. To get a storage driver, click load driver

when trying to load the USB it says no signed drivers were found. Make sure that the installation media contains the correct drivers, and then click OK

I just want to get my laptop running at this point and probably go back to windows 7. dont mind losing my files cus most were backed up

View 8 Replies

Automatic Preparing Loop Then Black Screen

Sep 13, 2015

I have tried changing the boot order and using a disc and a USB drive to get Windows to reinstall but it isn't working.

View 1 Replies

BSOD :: ( Preparing Automatic Repairs ) Then Screen Goes Blank 3-5 Seconds Later

Feb 10, 2016

I purchased a hp pavilion laptop a few months ago with Windows 10 pre-installed.

I haven't used it for a few days, turned it on this evening and I got a message on boot up saying

"preparing automatic repairs" and then my screen goes blank 3-5 seconds later.

I do not have a cursor and have tried various keys and different ways of trying to bring up some kind of option. I also tried plugging my laptop into my TV to see if it were perhaps the screen that was going wrong.

View 3 Replies

Installation :: Lenovo Y50 Laptop Stuck In Endless Fixing Repair Loop

Oct 13, 2015

I ran the window 10 installation last night on my Lenovo Y50 laptop. Today it is stuck in an endless loop of trying to Preparing Automatic Repair, diagnosing PCs and wanting to restart. I can't get past the limited choice of options to actually do anything useful. I just want to get rid of the thing and go back to Window 8. I am to computer stupid to know how do this. I only recently got the laptop. I don't have a recovery disk.

View 3 Replies

Preparing To Install 32% (Stuck)

Nov 12, 2015

Full story: I turned on my laptop, opened Windows Update, checked for updates. The Fall Update (TH2) appeared and I started downloading it. I downloaded it and now it's been stuck for an hour at 32% at the "Preparing to Install" step. What am I supposed to do?

View 17 Replies

Stuck On Preparing For Upgrade?

Jul 29, 2015

Windows 10 stuck on preparing for the upgrade. How long should this take? Its been like an hour and its still "preparing for the upgrade"...

View 21 Replies

Upgrade Stuck At Preparing To Install Stage

Aug 25, 2015

So earlier today I started to update my Nextbook 8" tablet through windows update. Since it didn't have enough storage to perform the upgrade, I was prompted to use an SD card which I did. The update downloaded fine but now the progress bar has been stuck in the same position for over 2 hours at the "preparing for installation" stage. If I restart the tablet will the upgrade start from scratch?

View 1 Replies

Automatic Repair Loop

Sep 21, 2015

I'm trying to resolve an issue with a Windows 10 desktop, HP small form factor purchased with OEM Win 7. Windows Update suggested Windows 10 and now the machine boots to the automatic repair screen but there is no mouse or keyboard function where the option panes appear.

While I did purchase the computer myself originally, it was purchased for the use of my church group, and two weeks ago came under the care of my co-deacon and friend. So, let's just say there is no recovery media now for Win 7 or Win 10. I can create a recovery disk here at home from one of my local Win 7 systems, but not sure if that will work or not.

I'd be perfectly happy to un-install Win10 from the machine, but there doesn't seem to be a way to get to the recovery partition... all F-key options have been tried.

This is a Core Duo processor.

View 2 Replies

Automatic Repair Loop?

Nov 1, 2015

So when I'm trying to log on, my computer does the whole automatic repair thing, but constantly loops. Now, I know this has been notified before, even for windows ten, but it seems I just can't fix it. All the solutions on the articles I've seen don't seem to work .

View 6 Replies

Automatic Repair Bad Boot Sequence

Aug 27, 2015

Yesterday my computer started up the automatic repair service when i turned it on. It attempts to diagnose the problem and fails. I've run chkdsk on both the boot and regular partitions of my install drive. I tried to repair using an install disk but it says it cant because my install drive is locked. I also tried resetting from within the recovery environment. When I did it got to 8% and then said it couldn't reset the os as it encounter a problem during the reset. I'm running Windows 10 off an SSD.

View 3 Replies

Automatic Repair Error Every Time On Boot Up

Oct 1, 2015

Every time I boot up my computer it does a repair on my computer then shows a error. The error says "automatic repair couldn't repaiclr your pc. Log file:EWindowsLogFilessrtSrtTrail.txt. I have windows 10

View 1 Replies

Avast Uninstall Resulted In Automatic Repair Loop

Aug 20, 2015

So I thought I'd try out free version of Avast. Well, after few weeks of getting rocked by popups, I uninstalled it(from programs and features) and rebooted it, thinking life is good now. Hell naw it ain't good now, not at all.

I'm stuck in Automatic Repair loop. Windows attempts to auto repair, tells me my PC didn't start properly, does not boot to safe mode, does not find any restore points, fails to "Startup Repair" and is unable to "Reset this PC"

In command prompt that I can open in that cute lil blue metro interface I get following:

1. Disks are there and volumes are healthy(tho volume letters are wrong my os SSD is D: and storage HDD is C: )
2. sfc /scannow tells me that there is a system repair pending which requires reboot blah blah fml
3. dism ran against D: with /Cleanup-Image /RestoreHealth fails with logs containing few errors(among tons of info logs):
*Error creating registry mapping:COMPONENTS - CIfflineRegistry::Init
*Failed to mount the remote registry
*Failed to set the windows directory to 'D:Windows'
4. dism ran with /revertpendingactions gives me same errors in logs as above

that's pretty much it. So is my registry completely screwed?

View 4 Replies

Performance :: Computer Goes Right To Automatic Repair After BIOS Screen?

Dec 8, 2015

I was trying to play a game the other day after not playing for a long time. I hadn't restarted the computer in days. The game wasn't loading properly so someone suggested restarting the computer. I decided to restart my PC. Waiting for it to restart i was met with a Windows failed to start or something like that. I clicked advanced options i first clicked System Restore and of course all the restore points i set every month were somehow gone. Because i waited and waited and waited and suddenly it told me there was no restore points found. I then tried opening up the command prompt and switching to the D: drive because for some reason my HDD becomes D in the automatic repair. But anyways i punched in chkdsk /f. I was surprised at how much it found. I then thought it might actually start now! I restart. It doesn't work. I turned off the computer last night and haven't touched it since.

P.S. I also tried Resetting. That failed too.

View 4 Replies

Reboot Loop / Cannot Open Automatic Repair And Can't Run Setup From USB

Jun 13, 2015

I was running the Win 10 build 10074, in the slow ring. I left it unattended for update, which included the newer build 10130. Before leaving, it was at 99% downloaded. When I returned after 30 mins, it was stuck in an endless restart loop.

It restarts within 2 seconds of displaying the Windows logo, when I try to boot from the HDD. If it goes into Automatic Repair, it shows "Starting automatic repair" under the logo and restarts after some time.

But the worst thing is that the same problem occurs, Even if I try to run Windows 10 setup/repair from a USB drive!! (build 10130). It just reboots a few seconds after showing the logo, even when I removed the HDD. I am totally stuck. I am currently running Ubuntu from a USB drive, which is working just fine.

I am not sure what happened in my absence, though it's unlikely that the newer build was installed in just half an hour. The only idea thing that I can think of and have not tried is to try running an earlier build or version from the USB drive.

View 4 Replies

Automatic Repair After Memtest Session - Hardware Faulty Or Not?

Feb 21, 2016

Getting weird problem with Windows 10 Pro. So few days ago when i ran memtest few hours without error, but after finished test i reboot pc and Automatiic repair started before windows. Is this something with memory ? Memory trigger that error? Or it is software issue? Coincidence ?

When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc. Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem occurs only when starting system again after shutdown.

My disk is Samsung Evo 250 GB SSD. I run HD TUNE but no errors and CrystalDiskInfo Smart is fine 100% GOOD. Rams are 2x8gb DDR3 Kingston Hyperx 1600mhhz.

Memtest86 not showing errors. So its a hardware related or not?

View 4 Replies

BSOD :: Automatic Repair Loop Ended In Monitor Going To Permanent Sleep Mode

Oct 5, 2015

I upgraded to Win10 about a month agn Friday my pc was stuck in the Automatic Repair Loop. I tried alt+ctrl+del no result. I reboot and pressed F10 the monitor went to sleep mode. When I pressed the on button on the monitor, the Monitor Status reads as follows:

DVI: No signal
VGA: No signal
Auto Switch Source: on
Default Source: DVI

At a point in time, a msg appeared saying "check video cable" so I used the VGA cable on two different ports no success. I bought a DVI-D cable and used it still the monitor is in sleep mode

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved