Upon starting windows (10) I'm constantly being shown the boot manager and the only OS I can choose from is windows 7. I am using W10 having upgraded from W7. Windows still boots but the startup times vary from 15sec to around 3min.
Here is a screenshot of my boot tab in msconfig and a screenshot of mt disc management screen.
- Album on Imgur
I'm on Windows 10 32bit and have made a bootable usb Windows 10 64bit using 'Windows 10 media creation tool.
My mother board (ms-7788) originally came with Windows 7 and its own bios. I now can't access the original bios and the uefi gives me no boot from option.
i got a new hard drive and installed it few days ago and when i boot up, it asks me every time, which OS i want to boot up. This gets annoying since I only have 1 and I can't find the boot.ini anywhere and websites don't specify how to remove an OS from the boot up screen.
View 2 RepliesI have a Gateway/Acer computer and have not found how to access my boot menu in Windows 10.
I want to disable Secure Boot and then do a Clean Install of windows 10.
I recently (clean) installed Windows 10 on a new SSD. Windows 7 resides on my first drive.
1) I first set the USB to boot from;
2) Began to install Windows 10;
3) First snare: upon first reboot, after removing the USB, the system just started my old Windows 7 (!). (I expected a dual boot menu there.)
4) Rebooted, set SSD to first disk, and finished installing Windows 10;
5); Tried to add boot menu later (both in Windows 7 and Windows 10), using the Advanced System Settings, to no avail: neither OS sees another boot partition.
I have only win10 installed, and one system drive. By accident I boot from win8 dvd, and now win8 appears in boot menu. I tried to remove it in msconfig, deleted and rebooted, but it reappears.
Also I tried to add safemode options to boot menu, I followed tutorial and used command prompt and bcdedit, safemode option appears in boot menu but it doesnt work, it only reset my machine and boot to win10, it doesn't go to safemode. This is how bootmenu look, but only win10 works.
How to remove all other items except win10, for good?
msconfig dont work as they reappear.
How to add safemode item, so it can really work?
I have the following entries in my system start up:
Windows 10
Windows 10
Windows 7
How do I remove the last two entries so startup just shows one Windows 10 only or just boots right into Windows 10 without a start screen ?
Recently I've installed Windows 10 on a Dell Inspiron 17. It had had a preinstalled Ubuntu. When installing Windows, I deleted the Ubuntu partition, leaving only the one for system recovery and the one called DIAGS, I think.
Now everytime the system is loading, for a split second I get the Windows Boot Menu screen that's cut from the top. See : [URL] ....
After that, the system loads just fine. What is it and how do I get rid of it?
When I open File Explorer there are a number of items listed in the left pane. Is there a way to remove some of them that I do not use like Videos and Music? Also at the bottom, after Network is Homegroup. I do not use Homegroup. Can I delete it from this list? I have other computers that do not list Homegroup so why does this one list it?
View 5 RepliesSo, this is a really weird problem I've only JUST started to encounter. I went to go overclock my CPU, as I've been playing FF14 a lot these past few months and figured an overclock would work out with the events taking massive chunks out of my framerate whenever I go near a populated area.
So, the Overclock failed, and I had to restart my computer and go back into the BIOS to reset everything to factory. This is where it gets weird. Now, whenever I boot up my PC it'll go into Windows but give me a 0xc0000225 Error. But, when I go into BIOS and go into the boot menu and boot my SSD from there, it works flawlessly. It's not a /massive' inconvenience I suppose, but it's still baffling.
I've got an Asus Z97-A Motherboard.
Before installing Windows 10 I clean reinstalled my Windows 7 onto a new SSD but inadvertently left my BIOS boot drive as my old HDD. Now I find that I have my windows 10 boot files in the HDD and the rest of the OS on the SSD, so I am still dependant on that old HDD. It's quite old, and I tried to swap it out to a new HDD but found this issue.
I've tried BootRec /RebuildBcd, BootRec /FixMbr and BootRec /FixBoot, rebooting the PC between each, but without success. I want to make the SSD bootable, what have I missed?
I have 2 SSDs and a few mechanical HDDs. I was dual booting (with Win 7 and 10) by changing the bios boot order for a while but have now decided to stick with Windows 10. By default Windows 10 loads. However I used to have Windows 7 as my boot drive. I want to now format the older SSD that Windows 7 is on and use it as a backup drive. Before I format my old Windows 7 drive I want to check that 10 will load okay. In the past years I have removed drives and found my OS no longer boots, so I don't want to make that mistake this time. I need to make sure my boot is coming from the 10 drive. So I have done a screen grab for you to see. Do I need to make the actual 10 partition active, or is just having the 500mb reserved partition as active ok ? The windows 10 drive is listed as such (C) and the Windows 7 drive is titled "Ready to Format" (H).
View 1 RepliesWindows 10 currently installedUEFI (Legacy/BIOS is supported but I do not prefer using it as it may cause more problems in the future)1 Hard Disk Drive
Goals: Install Windows 7 on another partitionMaintain my current Windows 10 installationNOT have to switch to Legacy/BIOS mode
I found this: Windows 10 - Dual Boot with Windows 7 or Windows 8 But it assumes a Windows 7 installation and subsequently dual booting Windows 10 on it. What I would like is essentially the opposite.
Whenever I try to install a 64 bit Windows 10 copy from a flash drive, I get stuck on the 4 blue squares, with no white dots spinning. Then after about 10 seconds the PC restarts. I have tried the official way with the media creation tool, I have tried just downloading the ISO and using a third party bootable USB maker, I have tried ISO's from pirate sites (yes, I know, not the best solution) but none of those worked. Every time I tried a different method I always fully formatted the USB drive. Oddly enough the 32 bit version worked once or twice but even that doesn't work anymore. My PC specs are quite good so I really don't know what's the issue. Btw im running a 120 GB AData SSD and a 1 TB Seagate hard drive.
View 5 Replieshow to be able to install both Linux and Windows 10 on my laptop's hard drive?So that when I restart my laptop I will be able to choose from either Windows 10 or Linux?
I did that once with Windows 7, and I remember I had 2 possibilities: Either to be able to choose through a Linux prompt at the startup, or through a Windows prompt. I tried both options. (It was either doing it via a Microsoft boot manager or via Linux boot manager or something like that, I just can't remember)
Edit: I remember there was some sort of Linux boot manager if you install Linux AFTER Windows, and if you then delete Linux completely, you had to repair Windows boot loader (Or it was the other way?i.e installing Windows AFTER Linux and then repairing Windows boot loader?)
So I've finally managed to install Windows 10 Pro x64 although with Windows 7 left over in dual boot. It created a "Windows.old" folder in the C: drive and Windows 7 doesn't boot anymore. How do I uninstall Windows 7 from my PC and will it affect any files?
View 7 RepliesI am dual booting Windows 10 and Windows 8.1. Each operating system is on a separate physical solid state drive. My default is Windows 10. The Windows 10 OS was installed on the drive that originally contained Windows 7 when I dual booted Windows 7 and Windows 8.1. I don't have drive partitions to deal with as each operating system is on a separate physical drive.
Now I would like to remove the dual boot by removing Windows 8.1, leaving just Windows 10. That will leave me with an unused SDD.
When I am in Windows 10, the default OS, the msconfig Boot section shows Windows 10 as the default, as it should. To remove the dual boot, can I just Delete Windows 8.1 from the Boot section of msconfig and make the setting permanent?
I was working with my computer the other day and it rebooted spontaneously. When it did I got a "Preparing Windows" or "Configuring Windows" message after I logged in and when if finished I was back at the very first Windows set up. None of my start menu adjustments were there, none of my mouse, wallpaper, etc. settings were in place, and worst of all I lost all my settings for my Firefox and Thunderbird applications which meant all of my mail history, address book, etc. btw, I wasn't connected to the internet at the time, my connection was down.
I get a message saying it can't? find a profile so it is creating a temp one which will be deleted on shutdown.
I should point out that my files are still there, except for Appdata/Roaming and I do have a back up of my data so if I can stop this reset behavior I can recover data.
Now it reconfigures at every reboot. Even after reestablishing my internet connection.
I just got my new MSI GE62 2QD that came installed with windows 10. Now I'm new-ish to computer systems but I used to have a dual boot of Windows 7 & Ubuntu using basic bios. Now I am lost with the new UEFI.
Here's my question: With my new pc using UEFI, how would I go about dual booting Windows 10 & Fedora 22 Without using grub. I wish to keep the default Windows boot loader.
When I try to install windows it says "Windows could not prepare the computer to boot into the next phase of installation. To install windows, restart the installation" and i restarted like 10 times but its still not working ...
View 1 RepliesOK, I have Windows 7 OEM Version and want to upgrade to Windows 10 After I get Windows 10 Activated through the upgrade can I...
Clean install Windows 7 (with Original 7 key) and clean install Windows 10 (should automatically activate) to have a dual boot? Or is Microsoft going to block my activation saying you can't have both 7 and 10?
I have a different computer that has a OEM-Builders edition of Windows 7. I don't want Windows 10 on it right now as the software I need to run will not run on it but...
I want to upgrade to Windows 10 just to get the free upgrade and activate then revert back to Windows 7.
Later on down the road a year or so can I install Windows 10 with no problems activating it?
Samsung RC510 - Got stuck at windows 10 logo when trying to boot into USB.
BIOS Type:PhoenixBIOS Date:January 19th, 2011BIOS ID:03HU.M008.20110119.KSYBIOS OEM:03HU.M008.20110119.KSYChipset:Intel 044 rev 2SuperIO:UnknownManufacturer:SAMSUNG ELECTRONICS CO., LTD.Motherboard:RC410/RC510/RC710
Okay, so the other week i received a new Clevo P650SE laptop. The laptop only had a 500GB 7200RPM HDD with Windows 10 to begin with, so yesterday i added my Samsung 840 EVO SSD. As i wanted this to now be the primary drive, i made another new installation of Windows onto here. After doing this, the system now displayed a boot selection at startup with the choice between the new Windows 10 installation on my SSD or the old one on the HDD.
As i no longer wanted to use the HDD for running Windows, i decided it would be best to delete Windows from this drive. So i booted onto an Ubuntu USB and wiped the entire drive of it's data in GParted, which included three different partitions. This seemed perfectly fine to me at the time, because i had a the new installation from the SSD showing up in the boot manager.
However, when i rebooted the machine and attempted to boot into the new installation on the SSD, it gives me this message:
"The boot configuration data from your PC is missing or contains errors.
File: /EFI/Microsoft/Boot/BC Error code: 0xc000000f"
I have tried everything to recover the system but nothing has worked. Startup repair from my Windows USB doesn't do anything, the system reset wouldn't operate because it stated that the partition was locked.
Nothing with the Command Prompt is working, I have done 'bootrec /fixmbr', 'bootrec /fixboot' and 'bootrec /rebuildbcd', but the last command returns the following error:
"The requested system drive cannot be found."
I also did 'bcdboot C:/Windows' but that also refused to work. I assumed the reason for this might be because the drive didn't have a letter, but when i attempted to add a letter is says:
"The specified drive letter is not free to be assigned."
Both drives in my laptop have now been completely wiped and converted to MBR, but even with the two drives empty the original message still appears when booting my Windows USB in UEFI.
I have only had this laptop a couple of weeks and it's already completely messed up. I can boot the Windows USB in Legacy and install Windows as normal, but of course i'm looking to have it back on UEFI as it was before.
I've just bought a little Gigabyte Brix 1900, but when installing Windows 10 I got an error saying:
"Windows could not update the computer's boot configuration. Installation cannot proceed"
It turns out that the unit needs a BIOS update to the latest version before Windows 10 can be installed. I just wanted to post this information here, as I imagine this will be a frustration to many others!
With a few workarounds, you can update the BIOS from within the Repair > Tools > Command Prompt options. Just be sure to download the DOS BIOS zip from the gigabyte website (which won't run properly, but contains the ROM), plus the Windows BIOS tool which you can then run from the command prompt.
My computer is trying to install Update to Windows 10 Home, version 1511, 10586, but can't. It claims there is no system reserved partition, but there is. This computer was upgraded from Windows 7 to 10, and immediately after doing that I installed a Samsung SSD and migrated the system to it using the software that came with the SSD. The migration went well and I've been using Windows 10 for months.
All of a sudden, when trying to do some updates it claims it cannot update the system reserved partition. The partition is there, it's 100MB in size. So I tried booting from the install CD, which I burned to do the upgrade (so I know it's a good disc). My computer recognizes there's a disc in the DVD drive, but no matter how I set the bios boot order it will not boot from the DVD, so I can't do a repair on the SSD.
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
