Windows Giving Error Unless Booting Directly From Boot Menu In BIOS
Feb 26, 2016
So, this is a really weird problem I've only JUST started to encounter. I went to go overclock my CPU, as I've been playing FF14 a lot these past few months and figured an overclock would work out with the events taking massive chunks out of my framerate whenever I go near a populated area.
So, the Overclock failed, and I had to restart my computer and go back into the BIOS to reset everything to factory. This is where it gets weird. Now, whenever I boot up my PC it'll go into Windows but give me a 0xc0000225 Error. But, when I go into BIOS and go into the boot menu and boot my SSD from there, it works flawlessly. It's not a /massive' inconvenience I suppose, but it's still baffling.
I've got an Asus Z97-A Motherboard.
View 1 Replies
Similar Messages:
Sep 8, 2015
I finally got around to building a computer and it was working fine until a few days ago I turned it on and something strange happened. Directly after the msi dragon bios prompt screen, when it should be booting Windows, the screen starts flashing white with two black squares on it. It only seems to happen after it has been off for some time, like over night, and after turning restarting it a few times it eventually works. For some reason invidia driver 355.82 does not like Windows 10 try darkbreeze's solution and install driver 355.60.Here is a parts list
i7 4790k
msi Z97-G45
msi gtx960 4gb
evga supernova 550 g2
G. skill Ripjaws 2x8 ddr3
Samsung 850 evo 250gb ssd
View 1 Replies
Nov 10, 2015
how to I boot directly to the start menu in windows 10?
View 1 Replies
Oct 15, 2015
I am booting from bios to a usb and installing windows 10 on a 250gb ssd and it get to about 77-82% and the spits out the error 0x8007025D and I cant get it to go any further. I have used the media installation tool to install on three separate usb's and still get the same problem.
Here are my specs
CPU: i7 6700K
MOBO: ASROCK Z170 K6
RAM: 2x8 DDR4
GPU: RADEON R290x
All that's plugged in is the ssd, monitor, ram, and keyboard/mouse ...
View 1 Replies
Oct 25, 2015
I turned on my PC and got a Windows 10 error saying my PC needed to be repaired. I can go into the BIOS menu but I don't know what option to choose to reinstall Windows 10. I have it downloaded from the official website on a memory stick but I am thinking of buying Windows 8.1 from Amazon cause I do not like Windows 10 and want the full version. I would go with Windows 7 but I don't know what is and isn't legit on Amazon. I do not want an OEM version since I may be upgrading my PC and will want to reinstall Windows if I have to once again.
View 1 Replies
Sep 14, 2015
I was playing with disc partitions and i accidentally deleted something... The problem is, that when i start my computer, Windows boot manager error appears (with no options, nothing, just some text about how should i reinstall / repair...), but when i start my computer, i have no way to access BIOS (I know how to access bios in my pc, I was accessing it like 20 times during last few days while installing various OSs... always with F2).
So actually I am stuck in a loop: start pc - cant access bios - windows boot manager error- restart - cant access bios - win boot manager error - restart....
With windows, i had problems with accessing bios before, but it could be solved by some kind of "absolute shutdown" of a system - holding shift while clicking "Shut down" - then i could easily enter bios with F2 during start.
View 9 Replies
Nov 10, 2015
My pc which i recently upgraded to windows 10 a few months ago without any issues, now its not booting up windows. It starts and i can access the bios page but after that i get a black screen with a blinking small dash/line.
View 2 Replies
Jul 26, 2015
My wife is about the worst technophobic person you will ever find and I have our Win8.1 laptop set up so that it boots directly to the desktop. I will put a standard user profile for her but I would like to make Win 10 as easy for her to get used to as I can.
View 9 Replies
Mar 19, 2015
I partitioned my drive to have Windows 8.1 as my daily driver and Windows 10 to play around with. Today when I went to update to the new 10041 build (which did not work, it's stuck on a Windows Defender update and an Intel display driver update) I don't know what happened that now I don't get the screen upon booting my computer to choose between the two partitions. It just boots directly into Windows 10. When I check the Disk Management I can see the other partition is there, but I have no way of booting into it.
View 3 Replies
Nov 17, 2015
I was using Windows 7 for about 2 years until I stumbled upon Windows 10 last month.I upgraded to it and used it happily for 2 weeks,give or take.Then the problems occur.
One day,after loading to BIOS,it booted to a black screen.No login screen,no cursor,nothing.I tried using the Windows troubleshooting utility and I've exhausted every option besides the wipe all your data option.
I tried booting with cmd, but it didn't do anything.Resetting PC with files intact also did nothing.Startup repair was the same case.System restore did not let me roll back due to some technicality.
In the meantime,I've tried installing Windows 10 on my other HDD,only to face the same issue after I rebooted.The Windows Media USB also did not work.
I'm really out of options here as I need to get some of my files out from my Caviar Black before I reformat it if I have to.
EDIT:For context,I sold my SSD and got a Caviar Blue 1tb.
View 1 Replies
Aug 13, 2015
When I try to record a game using the Game DVR functionality, it give me an error saying i do not meet the hardware requirements. i have a GTX 980.
View 4 Replies
Aug 23, 2015
My wife purchased a Dell 8700 XPS with i7 4790 processor,16GB ram. and Nvidia GeForce GTX 745 4GB and a 2 terabyte hard drive. She also purchased a Kingston HyperX 120 GB SSD. I used a popular software to migrated Windows 8.1 Home to the SSD from the HDD. This seemed to work well but on booting up the system the HDD boots unless I go into the bios and select the SSD in SATA 2 under the DVD reader/burner and select a {boot manager on Disk 1{ which was installed by migration software. I had hoped to format the HDD and use as data disk afterwards.
I noted that some threads mention I should have disconnected HDD when booting from SSD first time which I did not do.It also appears that the OEM partition is still on the HDD. I believe a clean install is required. Will this also remove the > boot manager on disk 1> line in the bios.
View 9 Replies
Jul 30, 2015
I'd really like to see what the store has to offer but, I can't access it at all. It just gives me the "server stumbled" and the error code.
I also can't use my micorsoft account at all. Any pre-installed app that you can link an account to fails. I'm really at a loss.
I looked up some of the error codes and found plenty of companies willing to let you pay to "fix" the error.
View 24 Replies
Mar 5, 2016
Booting loop, shutting down before you can reach the bios. Originally a response on this topic: [URL] .....
I have the same Problem here with my gigabyte z97 hd3 v2 motherboard in my PC. I had this problem one time before, then I tested everything 'literately everything' and I was done with it after a week of testing. I did put everything together and turned it on.... It Worked ! but how ??? I don't know.
[URL] ....
View 1 Replies
Aug 28, 2015
Attempting to upgrade to Win 10 I get through the entire process only to have it fail at the end and it gives this error code 80073B92-20009. This is going from Win 7.
View 7 Replies
Nov 8, 2015
I recently upgraded to window 10 from window 7 with iso file. I didn't had internet access then, but my window run successfully. Later, when i tried to attach another display with Laptop it did not detect it. So, i installed the windows updates. But after installing i was unable to boot into windows. A black screen with blinking cursor appears right after the Dell Logo. I am only able to go into bios setup by pressing F2, no safe mode option. I tried making a bootable Pen drive for repair but even it wasn't detected. I already change the boot priority in bios menu. Therefore i am unable to fresh install the window as laptop cd drive is not functioning from quite some time.
View 3 Replies
Feb 23, 2016
I have installed one app in Windows 10 through Win store, and I want to move one file to that app folder, but every time it is asking me, u need to perform this action - try again or cancel. I have permission to all the groups to move that file, check screenshot below...
But still I don't have access to move files over that app folder, I am tired now..
View 1 Replies
Aug 20, 2015
Upon starting windows (10) I'm constantly being shown the boot manager and the only OS I can choose from is windows 7. I am using W10 having upgraded from W7. Windows still boots but the startup times vary from 15sec to around 3min.
Here is a screenshot of my boot tab in msconfig and a screenshot of mt disc management screen.
- Album on Imgur
View 1 Replies
Jan 18, 2016
So I installed windows 10 on my PC yesterday, I used to have windows 7. Today I turned on my PC and it says that I can choose to open my PC in windows 7 but not windows 10. So I thought OK I'll just try that, Then it said an error 0xc0000428 and it won't let me turn my PC on, I press enter and it enters the same loop of saying the error and selecting what version of windows I want to open.
View 1 Replies
Oct 20, 2015
Recently I've installed Windows 10 on a Dell Inspiron 17. It had had a preinstalled Ubuntu. When installing Windows, I deleted the Ubuntu partition, leaving only the one for system recovery and the one called DIAGS, I think.
Now everytime the system is loading, for a split second I get the Windows Boot Menu screen that's cut from the top. See : [URL] ....
After that, the system loads just fine. What is it and how do I get rid of it?
View 1 Replies
Mar 26, 2016
I have an i7 build, asus z97a mobo i upgraded my graphics card from an nvidia 970 to a 980. When i powered up system went to bios, i cant get windows to boot. I reinstalled the 970, still no windows, then tried onboard graphics, took out mobo battery and jumper on board to reset, still cant get windows
View 1 Replies
Aug 19, 2015
My problem is that I can't access UEFI Firmware settings or Boot from USB/DVD in the Advanced startup. They are missing. What can I do? I want to go back to windows 8.1 (Don't have windows.old folder), but it gives me an error when I install it when windows is running. That's why I want to boot from DVD, but I can't.
View 9 Replies
Sep 5, 2015
Have a Dell XPS 8300 which came with Win7 Home Premium. 10-12 days ago, finally got my system upgraded to Win10... but, after completing the password, all I get is a black screen.
FINALLY figured out it's because this motherboard came with an on-board VGA and delivered with an add-on VGA/HDMI board... It's truly annoying... but tapping Window-P (keys) gets me to where I can choose "which screen"... biggest rub being I'm doing it in the blind.
Soooo... I want to get into my PC's BIOS to disable the on-board video... at other times, I'd like to be able to change other BIOS stuff like Boot Sequence, etc. HOWEVER... Win10 seems to have disabled the keyboard (no F2, F12, etc) until Win10 takes control and intercepts. Googled and found several "fixes" but none work.
how I can boot this system... and get into it's BIOS... PREFERABLY directly at startup?
Also, why does SHUTDOWN NOT totally power this machine off?? Hate internal lights being on... keep seeing my Ethernet lights blink... and getting tired of pulling the cord?
View 9 Replies
Aug 24, 2015
I have had nothing but issues, since upgrading to Windows 10 from Windows 8 (64). The installation within of itself was horrible. I got the continual flash on the screen, until I was able to get it into safe mode and recovered it. Then made sure drivers were updated. However, I did not upgrade my BIOs, from the information I had seen from MSFT. Didn't think twice, since they said if you were upgrading from 8 or 8.1 that should not be an issue. The system was running stable, after I did those fixes.
About 1 week ago, after a MSFT Windows automatic patch push, My monitor started not to respond during boot up. Ran some basic troubleshooting for the monitor (Ie: check plugs, check cables, check Video card). They all seemed to work fine and my system booted up normal.
The very next day, cold booted again and monitor did same thing, it was not getting any signal from the computer. Went through the checks, after a little bit of a delay the system finally booted. I checked my BIOs settings, which were all set up normally. I locked my computer after that and did not turn off the system, the next morning, my monitor was unresponsive.
I re-checked monitor, cables and even replaced the video card. Everything is good except no signal to my monitor. I disconnected all hardware except the video card and motherboard, to see if it was an issue with my power. I took out out the CMOS battery and also disconnected power to the motherboard for about 2 hours, to try and reset the BIOs to factory. No luck.
This leaves me with 2 things left:
a) Corrupted BIOs, not loading my drivers, or
b) motherboard went bad.
Going to try a bootable USB BIOs next.
View 4 Replies
Jan 26, 2016
I just got a new gpu put into my computer. A few things were changed around in the settings. It boots fine and everything is good. Except my number lock key use to light up during boot and I would just keep hitting delete which is my mobos command to enter bios and it would go in. Now when booting the numberlock key doesn't go on and just pressing delete doesn't work. It just goes straight into my windows login.
My computer works %100 fine and I just need to change 1 thing in the bios but I can't get into the setup. How to get my numberlock on during boot or to get into my bios? I don't even see "hit del to enter bios" at the bottom of the screen anymore. And my numberlock key doesn't even go on during start up until the windows login. I went into my settings and unchecked the fast boot up option in the power settings menu. Nothing has worked yet.
View 1 Replies
Sep 10, 2015
I have upgraded Win 8.1 Ent into Win 10 Enterprise. While upgrading I had an older version of BIOS. Since then I have upgraded to the latest BIOS version available for my MOBO. My MOBO is ASUS's P8H77.
I can not boot or restart into BIOS from Win 10. I have googled the problem and it was mentioned something about new UEFI method of OS installation. When I am trying to restart/boot using the Advanced Boot option my OS is missing the "UEFI Firmware Settings" option, therefore I can't get into my BIOS.
My questions are:
- All this is happening because I had an old version of BIOS and when I upgraded something got screwed up?
- Does my motherboard support Win 10 UEFI option at all?
- Do I need to do clean install? Is it possible to avoid such option?
Reason for all these trouble: My PC freezes when I leave it working overnight. I do not know how to troubleshoot it because no reason for the freeze is indicated in the Even Viewer. Why the heck my PC freezes? I do not get any BSOD or errors, just a freeze and the only way to reset the PC is to hold down the power button.
View 1 Replies
