Installation :: Upgrade On Triple Boot Machine
Nov 14, 2015
I have a Dell XPS 9100 machine that is triple boot, Win 7 SP1 Drive on C (this is the OEM OS), and Win 8 (not 8.1) on Drive I, and Win XP SP3 on Drive D.
I would like to do a upgrade of the Win 7 SP1 Ultimate drive C to win 10 pro th2-10586. How I might do this and keep my triple boot intact?
I have been an insider since the program started and have run win 10 pro on several VM's on my win 8 OS. I also have Two Retail win 10 pro USB drives (10240) that I'm sitting on.
Would it be better to upgrade the OEM OS or do the upgrade from one of the retail USB drives and then let it update to th2-10586?
View 3 Replies
Similar Messages:
Jun 4, 2015
Assume a computer with the UEFI firmware interface.
Assume that during or after a user has upgraded a W8.1 machine to W10 things go horribly wrong - Black screen, Blue screen, No screen. The user now tries to Boot from a USB Emergency Boot Disk that they previously created using the W8.1 utility and then they try to restore W8.1 from a System Image Backup (the one in File History) that they previously created.
Will this be possible and will the Product Key in the UEFI firmware allow a reinstall of W8.1 after a W10 upgrade...?
View 9 Replies
Sep 24, 2015
My laptop has dual boot - Windows 7 and Windows 10. My Win7 environment is my main working environment with lots of programs installed and important files. I installed the Win10 environment just to play around with 10 during the technical preview. Now, I would like to disable the 10 environment and upgrade the 7 to 10. Am I able to do this, or have I already "used up" my one upgrade on this computer's Windows license?
I notice that in Windows 7 I have not received the icon in the notification area that invites me to upgrade to 10. This makes me think I might have used up my chance to upgrade.
My end goal is to have a single Windows 10 environment. Note that the reason I want to upgrade my 7 environment to 10 is because I don't want to have to re-install all of my programs and files into the current 10 environment.
View 3 Replies
Aug 1, 2015
So whenever I triple tap, the Cortana search engine pops up. I've relegated it to just the search icon in the bottom left corner, but this still happens, more often than not by accident.
View 5 Replies
Sep 16, 2015
I currently have a dual boot setup with Windows 7 and Linux Mint. The upgrade to Win 10 is ready. Will the upgrade destroy my boot sector ? If it does, will I be able to re-install Linux after upgrading to Win 10 from Windows 7?
View 9 Replies
Nov 5, 2015
Every since I upgraded to windows 10 and boot my desktop machine I get a BSOD with Bad Pool header. It keeps looping and rebooting with the same error. The only way around it is to go into the bios and save changes and then it allows me to log in. I have disabled fast reboot and still no joy. Attached is a log file with all the relevant info
View 3 Replies
Aug 3, 2015
I recently built my computer, and it was working fine, I installed all of the drivers, but when I installed my graphics driver, my monitor just turned off. Now when I try and boot my machine, it goes to the windows 10 logo then nothing. My screen is black and my USB connected devices just turn off.
Specs:
mobo - asus m5a97 r2.0
GPU - Zotac GeForce 760
CPU - amd fx 8350
PSU - corsair 600w
View 1 Replies
Mar 19, 2016
I've got a Windows 10 machine that was automatically upgraded from Windows 8.1. It was working fine for a few months. Suddenly it just hangs on boot. It gets to the blue screen with the spinning white dots. Pressing Ctrl-Alt-Del brings me to the login screen but with only a restart and shutdown option. I can boot into safe mode, but I don't know what to do there.
View 14 Replies
Sep 3, 2015
OK, I have Windows 7 OEM Version and want to upgrade to Windows 10 After I get Windows 10 Activated through the upgrade can I...
Clean install Windows 7 (with Original 7 key) and clean install Windows 10 (should automatically activate) to have a dual boot? Or is Microsoft going to block my activation saying you can't have both 7 and 10?
I have a different computer that has a OEM-Builders edition of Windows 7. I don't want Windows 10 on it right now as the software I need to run will not run on it but...
I want to upgrade to Windows 10 just to get the free upgrade and activate then revert back to Windows 7.
Later on down the road a year or so can I install Windows 10 with no problems activating it?
View 2 Replies
Aug 8, 2015
I have tried and tried to upgrade from WIN 8.1 to 10 with no success.
The error that comes up is "0x80070004 - 0x4000D The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation."
I have removed all 3rd party antivirus, and a bunch of other fixes. A
View 1 Replies
Mar 12, 2016
After upgrade Dell Inspiron 580 to win 10 the system boot option F12 seems disabled and the box will not boot from the alternate drives (cd then USB) enabled on the motherboard. F2 still brings up the system motherboard edit.
The failure to boot from cd defeats my drive imaging backup software.
I am unable to find a secure boot option on the motherboard, so I suspect the issue is something else.
View 3 Replies
Jul 30, 2015
I received the error shown as the installation started, the first reboot after downloading the files and updates.
View 3 Replies
Aug 15, 2015
I have a few laptops, all of them are the same specs except for a few with a different GPU. All of them run the exact same software. I'm planning to upgrade them all manually to 10 first to register the machine, then create an image so in case a drive goes belly up, I'll just restore it from the image created instead of installing all the software one by one. I'm going to take one machine, sysprep it then keep a copy of that image for restoring on to the other machines.In this case would it just reactivate properly on the newly cloned machine?
View 5 Replies
Oct 18, 2015
I just bought an HP Pavillion 15 ab15nr laptop with windows 10 and messed up the install of my programs. The factory recovery partition is untouched and as far as I know intact. How do I go about returning the machine to its factory condition using the Recovery Partition and starting over again? Boy, I miss having a Win7 type installation disk.
View 2 Replies
Jul 4, 2015
Right, so I've got a laptop that I'm currently trying to install windows 10 tp onto. It's the exact same model as the one I'm running on (it's my brothers, and I'm trying to fix it for him), but I've hit a snag.
The insider program website says that you can burn the .iso to a dvd and install it like that, but I've done that, and the laptop just stalls at a windows logo screen.
There's no operating system currently installed -- all 900 someodd GB are free and, using a windows 8 install disk to access a command prompt, DISKPART says the partition is healthy. I've cleaned and formatted it several times now to no avail.
View 9 Replies
Nov 27, 2015
I just upgraded from Win 7 to Win 10. The computer is connected to the home network via a gigabit switch. I notice that when the computer is in sleep mode ,there is still network activity but only the 10 mb/s connection LED is lit. When I had win7 OS and computer is in sleep mode , that same LED on the network switch would be off signifying no network activity at all .
Is this normal for Win 10 ?
View 2 Replies
Jul 30, 2015
I just did the upgrade from Win 8.1 to Win 10 - overall pretty seamless given what could have gone wrong- I was lucky this time. Some minor annoyances , but overall pretty good.
On the task bar search, about an hour ago, I know it was searching the web as I typed in a web address and it took me there....but now, suddenly, its only searching my local machine. I must have inadvertently changed something. that affected this. Where is the setting to get it back to the way it was so I can search the web?.
I know did change my default Edge search engine from Bing to Google...would that have affected the task bar search function?
I also turned Cortana off - did that affect it??
View 1 Replies
Jan 27, 2016
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
View 3 Replies
Apr 29, 2015
As I get ready to do a clean install of 10074 I am curious about the need to disable secure boot and fast boot options. If I do disable secure boot do I need to enable legacy boot?I have had limited success with previous installs to a 2nd hard drive and the problems that arose always seem related to dual booting.
In one instance I did a clean install of 10061 and had left secure boot enabled. In order to get dual boot working I had to disable secure boot, and upon rebooting I needed to change it back to secure. I then made Win 8.1 the default boot and then Win 10 would never boot from the menu, it would just take me back to the boot menu and I could boot into Win 8.1.
View 9 Replies
Dec 15, 2015
I'm making a image for installation of windows 10. I make a USB flash drive with WINPE. and once the device starts into WINPE, it will automatically start to install windows 10 by calling "dism /apply-image". Normally i just shutdown the computer after installation, but now i want to reboot the device and boot into the windows i just installed. But i can't, because if i reboot the device, it will boot into WINPE again and start another turn of installation of windows. How could i temporary boot into my windows 10?
View 4 Replies
Jun 15, 2015
After several weeks of testing I'm ready to go full on Windows 10 and want to get rid of Windows 7 but I have some partitioning issues I want to clean up. I currently have Windows 7 on drive 0 (360 GB) and Windows 10 on drive 1 (500 GB). Both are SATA drives and RAID is enabled in the bios but not active.
What I think I'd like to do is simply swap the drives physically so that Drive 0 has my current Windows 10 install on it and make it primary boot active etc. The drive with Windows 7 on it would become drive 1 and I would delete the Windows 7 partition and re-partition it with a clean empty partition just for extra space.
Second question, any advantage to using this drive configuration in a RAID setup?
View 9 Replies
Dec 19, 2015
I have a legacy 64 bit dual core desktop (ASUS mobo). I have several Sata hard drives in it with the 4th partition of my 1 Terabyte drive containing my Windows 10 Professional boot OS. After converting another similar legacy machine to a NAS device I took the old Windows 10 32 bit OS drive from it and tried booting the ASUS machine with it. Needless to say, the OS didn't like it and reverted to Windows 10 Pro Insider Preview edition (build 11082).
When I tried to restore the boot drive to the original one for this machine the master boot was missing.
I had just formatted another partition on the same drive that had contained a Windows7 installation that had failed. This partition may have contained the master boot record. So I booted to a command prompt from a USB drive and successfully ran the following commands:
bootrec /RebuildBcdbootrec /fixMbr bootrec /fixboot bootsect /nt60 SYSbootsect /nt60 all
After that the BIOS just says "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system" This disk and OS are on the original machine it used to run on. As I understand it, Windows 10 tries to record it's key to somewhere in the BIOS. But the BIOS on these old machines don't provide such a facility. I don't understand what Windows 10 OS does with the key in this instance. If it was recorded in the BIOS then I'd presume that the other Windows 10 drive I attempted to use would have found it and used it. Or perhaps not, since it didn't like the new environment.
what I'm looking for is a way to get my original Windows 10 to boot again on the same machine it had always work on before, from the 4th partition of the 1 terabyte drive I'm using.
View 7 Replies
Feb 10, 2016
I wasn't sure which forum to put this into. I created a backup image on a usb hard drive. I wanted to be able to restore it using a usb recovery thumb drive. I used the create usb recovery tool and created the recovery flash drive. When I try to boot from the flash drive I get an error saying that the boot configuration data is missing or contains errors. I can boot up the laptop using the current windows install so it isn't referring to the hard drive. I have tried several usb drives and get the same message on each. Here is a screenshot of the message.
View 9 Replies
Aug 25, 2015
last few hours I spent trying to manually deploy Windows 10 on clean GPT disk but after applying image and rebooting I always end in unbootable state.
I manually setup drive like this:
Code:
select disk 0cleanconvert gptcreate partition primary size 350 #RE tools won't fit 300MB anymore :-)format quick fs ntfs label "Windows RE tools"assign letter tset id de94bba4-06d1-4d40-a16a-bfd50179d6acgpt attributes 0x8000000000000001create partition efi size 100format quick fs fat32 label Systemassign letter screate partition msr size 128create partition primary format quick fs ntfs label Windowsassign letter wlist volumeexit#no recovery image partition as per documentation it is no longer needed and followed by pretty common deployment:
Code:
dism /apply-image /imagefile:g:Sourcesinstall.wim /index:1 /applydir:w:dism /image:w: /set-Timezone:"Central Europe Standard Time"md T:RecoveryWindowsREattrib w:WindowsSystem32RecoveryWinre.wim -h -s -rcopy w:WindowsSystem32RecoveryWinre.wim T:RecoveryWindowsREwinre.wimbcdboot w:windows /s s: /f UEFIw:WindowsSystem32
eagentc /setreimage /path T:RecoveryWindowsRE /target w:Windows
After reboot I always end unbootable (as we talk Apple computer it means 1) no partition on Option or 2) folder with ? or 3) just gray screen, make your pick). There's a chance that Windows rely on some UEFI 2.0 feature, which is not available as the old guy has 1.2 only. Or maybe I missed some step somewhere.
View 2 Replies
Aug 22, 2015
After unsuccessfully trying to installing windows 10,it was stuck on 46% for 17 hours.
I tried to reinstall my windows 7 Pro Disc,it wouldn’t boot and was not recognize the disc,l tried to load and boot an Linux Ubuntu & Mint via usb & disc,didn't work.
I tried an XP pro disc that l downloaded and burnt onto a CD,that loaded XP pro on my PC. Which seems to work apart from not been able to access the internet.
I'm thinking maybe l should wipe the hard-drive and try to reinstall my windows 7.
View 13 Replies
Jul 31, 2015
I upgraded to windows 10 today. but the update failed and I got a boot phase error. soon after my system reverted back to windows 7, but it took 4 minutes for my system to actually get to the welcome screen, and it's been doing that since my attempt at upgrading, could this be a result of hard drive falliure or just the OS? should I do a clean install?
View 1 Replies
