I'm sitting on my windows 7 here, ready to upgrade to windows 10 with the "Get Windows" app.
One complication though is that I'm running on an old harddrive. One of those simple SATA disks.
I got my hands on a new SSD disk which I would prefer to have windows on.
So, How could I in the simplest way get windows 10 and have it installed on my new SSD?
Should I upgrade to windows 10 to begin with?
I backup photos from my phone to Google Photos which then automatically syncs them to my hard drive to a folder in Google Drive. The folder containing these images in Google Drive has been included in the Pictures library, but the Photos app doesn't see them and says "No readable photos, videos or folders found." I tried uninstalling and reinstalling the Photos app. The pictures show up fine in Windows Photo Gallery. Does the Photos app has always ignored images in Google Drive or is this a recent development?
View 5 RepliesI currently have an ASUS motherboard (p9x79 Pro) and am running my operating system on a spinning drive and using the ASUS cache which uses a 128GB SSD drive to cache the operating system disk.I would like to dump that arrangement and run the operating system on a larger SSD drive (they are cheaper now). Ideally I would do this at the same time as moving to Windows 10 so that I only have to install once.
My question is - if I go for a clean install to Windows 10 can I put this directly onto a new clean SSD drive - using my old windows 7 key to activate it (it was an OEM key I bought when I built the system) or will I need to clone the Windows 7 system onto the new drive before installing?The motherboard will not be changed.
Whenever I try to install a 64 bit Windows 10 copy from a flash drive, I get stuck on the 4 blue squares, with no white dots spinning. Then after about 10 seconds the PC restarts. I have tried the official way with the media creation tool, I have tried just downloading the ISO and using a third party bootable USB maker, I have tried ISO's from pirate sites (yes, I know, not the best solution) but none of those worked. Every time I tried a different method I always fully formatted the USB drive. Oddly enough the 32 bit version worked once or twice but even that doesn't work anymore. My PC specs are quite good so I really don't know what's the issue. Btw im running a 120 GB AData SSD and a 1 TB Seagate hard drive.
View 5 RepliesEven though my computer worked fine before I left for my vacation, I still saw the following screen after I returned immediately when I turned it on.
I put in my windows 10 installation usb drive and press F12 for the boot menu.And this screen comes up.
I choose the bottom one(the windows 10 installation usb drive) and the following error screen comes up.
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc & reboot.
2. Choose language and click next.
3. Click "Repair your computer".
If you don't have this disc, contact your system administrator or manufacturer for assistance.
File: EFIMicrosoftBootBCD
Status: 0xc000000f
Info: The Boot Configuration Data for your PC is missing or contains errors.
it says insert the installation media when I already have it inserted! What do I do to start windows again?
I've already upgraded to Windows 10 on my desktop PC, and there were no issues with the upgrade. However, I work from home and my work has informed me that they won't accept Windows 10, they will only accept 7 or 8.1 as their operating system (they also only accept Internet Explorer for browsing, etc.). So I can either downgrade, which I really don't want to do, buy a second PC, which I can't afford to do, or (I'm hoping) create a new partition and run Windows 7 from that.
So my question is, is it possible to create a new partition for Windows 7 while running Windows 10 on my main partition? Will I have to downgrade and install Windows 10 later? Or can I do it from Windows 10 already?
So I've recently bought an SSD Drive soley for the purpose of running Windows. The original Hard Drive was a 2TB Samsung drive that I have since formatted and using for Storage only. Installed Windows 10 on the SSD and the machine is working great, boots up in aound 10 seconds from turning the machine on.
Now heres my issue. For some reason if i turn my PC on and do nothing it will show the message no operating system found press ctrl, alt + del to restart. This is because its still looking to my original 2TB Drive to boot up. So basically I have to tap F something everytime i turn my machine on and select the SSD from the list.
Here is where things get weird. I have gone into the bios and have the choice of what the machine boots up with, so again i can select my SSD. The problem is the section where I can set the boot order default is only showing my 2TB Hard drive and the Blu-Ray drive, the SSD doesnt appear in that list. So it appears in one time boot options but not in the boot priority list so I cant set it as the default Drive.
I have just set up a mirror drive(software RAID1) and want to change the drive letter. I am getting a message "The parameter is incorrect". I am wondering if I am stuck with the one assigned when the mirror drive was set up.
View 6 RepliesI have Windows 10 on a 2TB HDD with about 1TB of the HDD full. I would like to migrate Windows to an 80GB SSD but I can't find anyway to do this without cloning the entire drive, which I can't do because there is too much content on the HDD. Is there any way to migrate Windows to a different drive whilst keeping all user files and installed applications on the old drive so I can have two drives in my system, the SSD for boot and the HDD for storage and applications.
View 4 RepliesIs there anyway to create Windows USB drive from another PC without knowing ADMIN password?
View 9 RepliesJust when I was happy with my installation I error checked my main C: drive with is a Samsung SSD, Windows reported that it had found some errors and it needed to be rebooted to correct them. I rebooted the PC and the check disk did it's repairs and it booted back in to Windows. I noticed straight away that the start menu had stopped working and when I opened Windows Explorer or did anything within it (like right click properties) or any settings windows like control panel it would take for ever. Opening programs like Internet Explorer work fine.
I have tried System Restoring to before I did the drive repair and sfc /scannow and Dism/Online/Cleanup-Image /RestoreHealth but I still have the problems. The SFC found errors and corrected them but still no Start Menu.
I do have a Trueimage backup from Last Friday which I will have to use if I cannot sort this out. Yesterday due to a on going occasional BSD I had fully uninstalled my Nvidia Geforce Video drivers using a utility that was recommended to me on this forum, I then reinstalled the drivers and it had been fine up until I did the Scan for errors so I don't think it's nothing to do with that.
I just got a Win 10 computer, and I am in the process of starting to prep it for moving all my old files over from my XP computer (using PCmover).
One of the things PCmover told me to do was go into Win 10's Task Scheduler and disable the tasks under the Active Tasks tab, which I did.
But now I can't find those disabled tasks to enable them after I complete the PC-to-PC file move. They've disappeared completely.
I went to settings / personalization / background and browsed to change my background picture to one that I had on my hard drive.
I was not satisfied so I went back to settings / personalization / background. The original picture that I wanted, was no longer there.
The original 5 have been depleted by my 2 poor choices. Where are the original background pictures located so that I can restore my background?
What has happened to the "SEE WHAT'S PRINTING" feature when you "see" your printer in the SETTINGS view in w10? Tried to cancel printing a 20 page document but could not even do that... could not find it.
View 2 RepliesSo I want to see all of the lockscreen pictures for Windows 10 but can't find them.
View 2 RepliesI'm trying to find the location of the icons located on the start menu (as seen in the image I uploaded). I am specifically looking for the folder explorer one as I am trying to set the taskbar explorer to that icon. I am using the program IconsExtract to scan my computer for icons but to no avail...
I figure since I'm not finding it as an icon, they must not technically be icons. As we are able to change their color via our color settings, they must be some sort of svg or something of the sort.
They are located in the Segoe MDL2 Assets Font. I was looking at this site and then realized that front-end uses fonts for icons as well. Then boom. win.
Now to figure out how to use it in xaml files and where the start menu is calling it.
More information on Symbol enumeration:
Unicode for the start menu icons
Documents: E160, E7C3
Download: E118
Music: EC4F
Pictures: EB9F
Video: E116
Homegroup: EC26
Network: EC27
Personal Folder: EC25
Folder Explorer: EC50
Settings: E115, E713
Power: E7E8
All Apps: E179
When I was running Windows 7, my system had a small solid state C drive that did not have enough space for windows 10 upgrade. I got a larger 2TB regular hard disk and used the manufacturer's software to clone the old Windows-7 SSD C drive to the new 2TB and then upgraded to Windows 10.
Now under windows 10, when go into defrag, the C Drive shows as a Solid State drive and of course windows does not want to optimize it.
The new drive definitely is not SSD. I assume somehow that setting was cloned from the old disk.
Is there either a way to change the C drive to a regular "hard disk drive" or force windows to defrag what it thinks is a SSD?
I currently have a PC that is running Windows 8.1. I have a 120GB SSD as the primary drive ( C: ) with the OS and a few programs installed on it. I also have a 750GB HDD ( D: ) installed in the computer. Over the past year and a half, I've installed some programs to the SSD and some to a folder on the HDD. I plan on updating this computer to Windows 10. To do that though, I was planning on wiping the SSD and doing a fresh install to it and just reinstalling any programs. My question is if there will be any issues regarding the programs installed on the HDD. I'm guessing some of them probably still have certain files installed on the SSD and that wiping it will mess up those programs.
I'm also wondering what a good way of installing programs to a secondary drive is for the future. I'd like to install some programs to the secondary drive without worrying about certain files still existing on the SSD while still being able to install some programs to the SSD itself. This way if updating in the future, I wouldn't have to worry about this issue. Let me know if this makes sense and if I need to clarify something.
I am the only user of my pc, and I am the administrator etc but the user name shown in the C drive is John and I want to change that to Pete.
I have drives C and F
In C the user is called John
In F user called Pete
Start/File Explorer/This pc/Local Disc (C/Users/John
Start/File Explorer/This pc/Local Disc (F/Users/Pete
Can you change the drive icons in Win 10? I did this in Win 8.1.
In regedit -HKEY_LOCAL_MACHINESOFTWAREMICROSOFTWINDOWSCURENTVERSIONEXPLORER
It won't let me type DriveIcons.
Basically, I plan to disconnect every other Drive from my computer (my 2nd SSD and the HDD I use for data storage). From there, I'd do a clean install of Windows 10 onto my SSD.
Will that SSD become my C Drive by default (I want it to)? Will is stay that way when I reconnect my other drives provided I continue to boot from my SSD?
Almost all of the data I care about is on my other internal drives. Should I bother backing up my other drives, or does upgrading them leave them alone?
View 1 RepliesWhen I go to disk management and right click on my # 2 HDD to give it a drive letter, it only shows Convert to Dynamic Disk, Properties and Help. change drive letter and paths does not show up ??.
View 1 RepliesI have 2 seperated (physically) SSD drives in my laptop.Previously I had windows 8.1 on one drive, and I installed windows 7 and upgraded it to windows 10 on the other SSD drive.I enjoyed windows 10, so I formatted the drive with the windows 8.1, but now suddenly my laptop says he can't find system drive, and I can't load the windows 10, althogh it was installed with no connection to the windows 8.1 and on another drive.
View 5 Replies64bit setups but not new to building windows-32 systems. Built a system and here is what I am stumped with. Never owned a 64bit version of windows until I downloaded it from amazon just a week ago. But in order to download it I initially setup my system using the only other OS I own which is vista32bit from which I was able to do a win10-32 install no problem (which is how I am posting this now.). At the beginning of my attempt to do a fresh install of the 64bit version message says OS missing replace disks with OS disks or something like that. I do remember reading somewhere bios settings are very particular and have to be set but i cant find that again. I can give more details in next reply.
View 9 RepliesI had a full licence (not OEM) of Window 7 Home premium. And I have upgraded to Window 10. Now I have put in more RAM to from 4 to 16 Gb. How do I reinstall a 64 bit Window 10?
View 3 Replies
