what ive in the past is got a 3.5mm jack from my gaming monitors headphone port and then ran it into my line in on my mother board and it had sound playing through my pc's headphones..just moved into a new office and pluged everything back where it used to be and now ive got no sound coming through the line in.
my settings URL...when i go into recording devices and make some sound on the console there is nothing shown as coming through?
I don't remember this line being there. After the PC restarted I now have it every time I open the Action Center.
View 7 RepliesFor some reason the device manager on three of my computers has disappeared from the computer management console. I can access the device manager via control panel or the settings for windows 10, but not via the computer management console. It is there when I first install windows 10, but sometime between the initial install and the time I install all my programs it disappears.
View 9 Repliesmy upgrade to Windows 10 My Motu 896HD's Audio console (which I use to change sample rate and bit-depth) doesn't open.
View 3 RepliesI have several user accounts on one machine under Windows 10. I would like to re-log-into these user accounts when the machine reboots from an update or from an extended (longer than UPS hold-up) power failure.
I use Thunderbird and have a lot of junk filtering going on which protects my phone from most spam.
I will be moving my two sons to Dropbox and back their stuff up to my NAS units continuously rather than intermittently.
For these accounts, I want the users' accounts to boot when the machine boots so that Dropbox is making a copy to the local HDD. The NAS units take it from there (final sync method TBD).
In no instance do I want a "live" console.
After I automatically log into the accounts, I want the machine left as if I had hit "switch user" after logging into each account--several accounts active and running, but the console waiting for a login.
I have been testing this in principal where I copy images from a friend's Dropbox to her Google Drive and to my NAS units. Right now I have to manually log into the account that does this after each reboot.
For my account, I also wish to start Thunderbird as well as log in. I assume just adding Thunderbird to the StartUp group will work?
C:UsersRichardAppDataRoamingMicrosoftWindowsStart MenuProgramsStartup (courtesy of
How to Add Programs, Files, and Folders to System Startup in Windows )
I am in the process of bringing 20 machines from W7 and W8.1 to W10. Seven down, thirteen to go. five of the twenty are W8.1, the rest W7.
When I open a program that I have pinned to the task bar, this line appears under the program icon. Is there any way to remove this feature?
View 9 RepliesI want to upgrade my Windows 7 to Windows 10 but I make use of VPN service and from time to time the connection do have drops and Windows 7 supports the re-connect option but I cannot find any info on Windows 10. This will decide it for me if I will go to 10 or not.
View 1 RepliesI know this has to do with virtual desktops... but it's super obnoxious. Is there a way to get rid of it? I don't really need or want multiple desktops anyway, and it's irritating that it shows a little green bar under every program even when I only have one desktop...
View 1 RepliesI'm not sure if this is a bug or just an issue affect my PC, but every icon on my desktop has a square-shaped line on the bottom left. In the attached image, you can see Steam games, but it affects other shortcuts as well (I just tested with Word, for example). Is this known? If so, any possible solutions?
View 9 RepliesWhenever I run a Windows 10 specific app, such as Edge, Store, Weather, etc, It opens properly, but the icon on the taskbar is simply a square with a line under it if it is active and only the line shows when it is inactive. If I pin a Windows 10 app to the taskbar, there is no icon at all. All other programs have the proper icon in the taskbar. Is there a way to get the Windows app icons to show in the taskbar?
View 9 RepliesFor some unknown reason I cannot any more navigate to Update panel from "Einstellungen" - it is blocked.
I have to cancel the "Einstellungen" window by the task manager !
So in this moment I cant go forward nor backward any more: cant activate Win 10 neither start the restore of my old
Win 7 system - unbelievable !!!!!!
Question: is there a professional command that I can enter in the command line to start/complete the restore of Win 7 ?
I am frustrated by this dilemma of Win 10 Update. The update od the Defender library also doesnt work and stops after several minutes complaining about the network. Browsing works of course. Windows Firewall is deactivated. No Antimalware program installed.
I installed an extra HDD, but after that every time I boot up I have this black screen with blinking cursor line for ages before Windows start. I actually counted how many times it blinks .....178 times.
I checked in the bios settings to see if it is set to start with the correct HDD, and it is.
Somehow, I tripped something that adds an extra line to the Sender line in my Microsoft Outlook in Windows 10(formerly Hotmail). Now I get TWO indications of who the sender is, instead of just one. The extra sender line is in smaller font, and appears just above the “normal” sender name. The “Junk” page doesn’t have this doubling up feature. I’ve gone through every settings and option feature, and none of them even mention it. how to get rid of the additional sender line?
View 6 RepliesI want to know how can I make a line break in Word universal app (on Windows 10) ? When I press return key, that makes a new paragraph (skip a line).
Usually , with the classic Word (desktop), we can press SHIFT + ENTER return to the next line but that is not working on Word Mobile universal app. How can we do that ?
my cd drive icon was showing and working then stopped showing up. I did as much research as I could and purchased AVG driver updater and it worked for a few days and won't work again.
View 1 RepliesWhenever I start my PC the notification icon has a circle with a line through it?
It says quiet hours if off, when I toggle it on and off again the circle with line goes?
My mouse is rather fokked, but in quite a subtle way; you see, since yesterday-ish, myself/my computer just can not figure out how to mouse. I like to play games, but this oh-so-subtle fokkery has got me on the ropes in terms of not losing my mind midprocess. Attached is a picture of 6 lines drawn from right to left in as straight a fashion as I could manage; from top to bottom: top is 500x:500y dpi, 1700x1700, 2700x2700, 3300x3300 dpi plus a bonus at 3300x3300, and an extra on a different surface at my typical navigation settings of 2700x2700. My mouse is a Cyber Snipa Silencer, ( Cyber Snipa - Silencer Gaming Mouse )
Now friends, my question is... Why has this fokkery occurred? I haven't changed my mouse-surface equipment for years. No updates have been installed to my knowledge. restarted my computer, still fokkery.
P.S. here is another picture of 6 lines, same parameters, but drawn from top to bottom, left (500x500) to right (2 sets 3300x3300 then 2700x2700 different surface.)
Lowering and raising the levels bar on this^ with a keyboard key or combination of keys.
I've been using Line In to listen to my game console audio but sometimes I need to adjust the volume, and I'd rather have a key to do it.
In Windows 10 is new app for photos and albums as default picture viewer.
In Windows 8.1 I used JPEGView, and sometimes Windows Photo Viewer.
Now I'm customizing Windows and I know how to start Photo Viewer from cmd and created context menu item.
I want to associate pictures again to JPEGView and have context menu item for Windows 10 Photos, so, how to run Photos from command line?
I use Adobe After Effects, which I often need to run multiple copies of using the -m switch. Windows 7 let me modify the shortcut in the start menu so it'd start with this switch, which if AE is already running means it'll launch a new instance of it, rather than switching to the instance I've already got open. However, in Win10 I can't find any way to do this - it has the same behaviour that launching AE from the task bar in Win7 did, ie it just switches to the already open instance. Is there a way to add the switch I need?
Just dragged it onto the desktop as a shortcut, and interestingly there's no option to add the switch there either (in Properties)..
EDIT: I can create a shortcut with the switch in Program Files (or presumably elsewhere on the C drive), but right-clicking and choosing "Pin to Start" seems to remove that switch. It opens a second copy when I launch the shortcut from Program Files, but not from Start.
The red line says something like "Some settings are handled by the company/organization".Which company or organization? If I were at work I'd be thinking about some LDAP setting and it would be all right, but here I'm at home, I have a very straightforward network and configuration.I'm not 100% sure, but I seem to recall this red text line wasn't there after the fresh install I did some weeks ago.
Still I can't think of anything that I tweaked that might have affected that.The only thing I changed is in the windows hidden advanced settings, where I chose so that Windows Update doesn't automatically download/install stuff, but asks for my permission first.
When my computer wakes from sleep mode an annoying black icon which looks like a "sleeping eye" with a line through it appears at the bottom of my screen. How do I get rid of it???
View 2 RepliesDISM command line utility won't work. I get an error 87. AND how do I change my user name?
View 1 RepliesI have msi laptop Windows 7 now I updated online to Windows 10 and reset. After reset now my laptop screen is blank and dash line blinking on top left side. Nothing working tried lot by pressing f10, f2, ctrl+alt+del...
View 7 RepliesThe Conexant HD Audio Sound Driver was replace by High Definition Audio Device after i update to Windows 10 Home Version 1511 from 1011
Now if i want to plug my earphones to the left side of the computer where the audio jack socket is located the sound does not transfer to my earphones except i will change the default sound device from speakers to headphones.
How can i set it to automatically when i plugin my headphones/earphones/external speaker automatically transfer the sound to this device without changing the settings?
I just bought this sound card and installed drivers for Windows 10. (and a crapton of bloatware with UI of Win XP media player...)
Everything works well except one thing: when I change the sound (or mute) I don't see Windows 10 volume bar. I mean these:
The sound itself changes, but there is no indicator. Is there a way to fix that?