Networking :: Unable To Connect To WiFi?
Oct 23, 2015
I purchased a new computer running Windows 10 (build 10240) today and have set up the windows. However, it will not allow me to connect to my WiFi. When I use the network option in the task bar, no wifi networks are shown and it says that there are no connections available. When I access the network settings, where the different sections are listed on the left-hand side, WiFi is not an available option.
Updating drivers Deleting drivers and then allowing the computer to reinstall A few different command prompt methods such as resetting the TCP stack, as well as trying some that were for people who upgraded from windows 7/8.
View 5 Replies
Similar Messages:
Nov 9, 2015
Changed my wifi name and password. After that I`m unable to type the password. After clicking connect it loads for a while showing "checking network requirements" and it ends with "cant connect to this network". Password box does not even show up!
View 2 Replies
Feb 23, 2016
I recently upgraded to windows 10. i started having a series of problems but they eventually fanned out but I still am unable to connect to the internet via wifi. I have to use the ethernet cable.
View 2 Replies
Aug 16, 2015
I have a brand new Dell computer with factory installed Windows 10. Unable to connect to Wifi. Shows "Limited" connection.
View 2 Replies
Aug 18, 2015
changed from windows 7 to windows 10 unable to connect to wi-fi using netgear AC1200 usb adapter will not connect gone back to 7 works fine.
View 1 Replies
Oct 31, 2015
i have tried connecting to my school's apartment however it always goes to no connections are available and then airplane mode and shows connections are available. the Wi-Fi connects just fine in all other areas of the school byt not in my apartment. The apartment is located inside the school and there are a couple of access points. I can connect to my friends Wii-U just fine but not my laptop? And when I troubleshoot, it says "Problem with router or access point.
View 1 Replies
Apr 14, 2016
Title says it all.
View 5 Replies
Oct 17, 2015
I have a PC out in my building and it runs off wifi, sometimes my modem shuts down and reboots but it will take like 5-10 minutes unless I go all the way back to the house and power cycle it. The problem is my windows 10 is set to auto connect to it but never does unless I click the wifi drop down list then it will reconnect, any application that tries to reconnect to a specific wifi more aggressively than windows 10 it gets annoying because if I need to use the pc I cant just look across the room to see if my modem is back.
View 4 Replies
Jan 8, 2016
The computer is at my dad's so I am relaying what he told me. It is a new Cell laptop, a quad i7 CPU with 10 Home ed.
He has a problem: everything that uses WIFI, that is Explorer, Skype, Firefox has long freezes. The connect is practically intermittent. None of his other devices (another Dell quad i5 laptop, an old Core duo Dell laptop not his Galaxy tablet, or his internet TV) have the problem. It is one network which is from his cable company wifi router.
I am thinking reinstalling WiFi driver first..
View 1 Replies
Jan 25, 2016
Brought a new Dell laptop and came with windows 10 and i can't get it to connect to wifi. It worked perfectly at my mums, but at home it says wifi password incorrect when its not. I have updated drivers, disabled and enabled the wireless adapter. In command prompt i type ipconfig/renew it says no operation can be performed.
View 11 Replies
Sep 13, 2015
I have an odd issue with my laptop since upgrading to Windows 10. The first time I boot I cannot connect to my home Wifi, however when I reboot I can. It is always the same every time I switch it on in that it will only connect on the second boot.
View 6 Replies
Jan 6, 2016
My son disconnected the wifi on his laptop. I know it is in Parameters - Reseau et internet (network - internet) - Wifi but the button to activate won't move. Don't know what to do.
View 7 Replies
Nov 7, 2015
I have just bought a new windows 10 machine. It finds my home WIFI but fails to connect with the message "Can't connect to this network".
I have tried all the obvious issues such as re-booting (every component). I have several windows 7 machines and have checked the configuration of the wireless adaptors and there is nothing different around security, or 802 protocol selected etc. I have tuned off IP version 6 after reading some forums but get the same error.
My router is provided is provided by SKY is:
Manufacturer Sagemcom
Model Number F@ST2304
Firmware Version 7.16a4N
ADSL Firmware Version A2pD038m.d24h
Whenever I try to connect I get the following router system log:
Nov 7 15:09:11 (none) user.alert kernel: Intrusion -> IN=pppoa0 OUT= MAC= SRC=136.159.181.168 DST=2.125.174.9 LEN=60 TOS=0x00 PREC=0x00 TTL=50 ID=40139 DF PROTO=TCP SPT=45482 DPT=23 WINDOW=5840 RES=0x00 SYN URGP=0 MARK=0x8000000
My first experience with Windows 10 has been extremely frustrating and wasted a lot of time. I see that this is also a very common problem. Equally frustrating is the lack of diagnostic from Windows...I appear to have no way of knowing why the connection failed (hence why I have shown the router log).
View 6 Replies
Jul 3, 2015
you could connect to an hidden wifi network? or it's just my laptop?
View 9 Replies
Jan 4, 2016
Yesterday I relocated our Wireless Modem to a cooler room. We live in the Philippines so these devices can get quite warm...After relocating and hooking up all the wires, cables etc. My wife's computer a Dell, would not connect to the Wireless modem. I checked and replaced all wires with new ones, and rechecked the connections, everything was okay...I use a MAC which is still working fine, and connected right away, so I know the Signal is getting out. I did the "ping" command and it is not going thru. Tried everything I know, cannot get her wireless to work. I have a Red X on her adapter, in the Network Connections dialog box, "Not Connected"...Her system uses a Broadcom 802.11n adapter, which I replaced just recently...When I registered I added all the Dell system info, CPU info etc..
View 1 Replies
Jan 5, 2016
How to configure my Win10 to automatically connect to multiple wifi networks?
I have wifi at home so when I get to the office I have to configure the "manage wifi settings" on my laptop, click "forget" my home wifi, and manually enter the office wifi password. I repeat the same process when I get home from the office or use the wifi in my brother's house. I had this on my Windows 7 but can't figure out how to in Win10.
View 2 Replies
Nov 25, 2015
After updating from windows 7 to 10 I faced a problem, my laptop's wifi does not auto connect when i turn it on, instead i have to reset my wifi adapter to connect to my wifi, this was not an issue on windows 7. My drivers are all up to date i even tried to reinstall them but still no result. It feels annoying to reset my adapter all the time when i turn on my laptop
View 2 Replies
Jan 12, 2016
Well, not exactly. I have NAS drives and mapped them just like I did on my Windows 7 laptop. It all works fine and the NAS drives show up just fine in network link too. Everything is Ethernet connected. But I see anomalies. If I reboot my machine, or even turn it off and switch it back on fairly soon after then I occasionally get a message about one of the drives being unable to connect. So I then go to 'this pc' and see a Red Cross through one of the drives. If I double click it then it either connects instantly or I will get the green bar filling for about 20-30 secs before it connects. I only have to do it once as after that access is instant every time I go to it. Now this doesn't happen all the time and it never happens if I turn the machine off and start it up after leaving it alone for an extended period. It just seems to be more likely after doing a restart or turning back on within minutes of it last being on.
but I do also notice that when I am in outlook and someone sends me a file (such as jpg pic) that I want to save to my NAS drives. I will click the attachment and select ' save as' and navigate to one of the NAS drives and it will not browse its contents straight away, you can kind of see it trying to open up and eventually after a few seconds it suddenly responds. And again it only occurs once, subsequent navigations all react instantly , for example I go into a second attachment to save down. It's hard to explain but I am inclined to think Windows 10 is just plain buggy . It's not as if the networking is a complete fail. It works but it's just unpredictable. My other Windows 7 machine (which I will never ever let Windows 10 get into it) behaves flawlessly with the NAS drives. They are always live and instantly accessible to it regardless of whether the machine has recently been on or restarted.
View 2 Replies
Feb 2, 2016
Product Name: Hp Omen 15
Operating System: Microsoft Windows 10 (64-bit)
Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
View 1 Replies
Feb 1, 2016
This issue arises randomly and only once has it ever recovered. Event viewer also does not show anything either. Restarting fixes this issue, but I would rather find out what caused this issue in the first place.
I cannot connect to any sites using HTTP or HTTPS but I can connect to my remote FTP server and PING works for any website. I have used 'netsh' in an attempt to fix my issues but it requires a restart where it would fix it temporarily.
I also cannot access any local IPs or my localhost web server. I can however access some of Google's websites on Google Chrome Dev but not on any other browser. For the other sites I get a TIMED_OUT error. I have reinstalled my network drivers and reset my network settings (including DNS) but nothing else works.
I even turned off Bitdefender Firewall and Antivirus and Malwarebytes and issued a system scan but does not impact anything.
View 9 Replies
Nov 12, 2015
I have been unable to do a direct cable connect. Settings are not available. In settings, to do a cable connect it asks for a name and ISP. There isn't any. I never had a problem doing this before and I can do it with my apple computer. It has now been 2 days trying to figure out how to do what should be the easiest connection. No problem with any wireless----not everyone has wireless! Your microsoft stores have a long way to go to match the apple stores. If you can't get a connection to the internet it is very difficult to communicate or download any patches.
View 6 Replies
Jan 13, 2016
After automatic online updates by MS the system was automatically set offline by MS!
Notes:
a) hardware is ok - verified by other OS
b) network connections were ok during automatic update and are still ok verified by other OS systems
c) the automatic update is the only change in the software
d) the only message was from MS browser "we are sorry you are not connected to Internet"!
Questions:
(1/5) What can be done ?
(2/5) Windows 10 advices to use online support in the situation MS update set PC offline, why ?
(3/5) How can one use online support after having forced to offline ?
(4/5) Is there any way to prevent Microsoft update to modify network drivers / drivers is general ?
(5/5) Why did the update by MS set the system offline after having completed its operations!
View 2 Replies
Dec 5, 2015
I updated to Windows 10 from 8.1. It was working well until it told me I had to create a new account and password. So I did and now I can use the computer fine and I have now have to login at the beginning which I don't want. I am concerned because when I go to >Settings >Accounts >Your email and accounts .... I get absolutely nothing. Nothing shows up. I want to just start the machine up and not have to login.
I am using bootcamp with a MacPro which could be an issue but I had 8.1 running like a champ with no issues at all. Bootcamp is 5.1.
Also, my wifi connection was fine for a couple of days after the upgrade. I downloaded an automatic update and after that my wifi needs to be troubleshot to connect. Then it drops out after 10 minutes or heavy usage. My wifi had been working flawlessly with 8.1.
View 4 Replies
Nov 16, 2015
I've recently upgraded my home PC from Windows 7 to Windows 10. I've been using a Realtek USB Wi-Fi adapter to connect to the internet. After installing the new OS and running it for the first time, I couldn't connect to my home network.
After reinstalling the drivers supplies by the manufacturer and reattaching the adapter, I attempted to again connect to the network. The "Verifying and connecting" message displayed, but after closing Settings and returning to the same page, all of the Wi-Fi settings have disappeared, like the drivers have crashed.
View 9 Replies
Feb 10, 2016
Since my daughter (2 years old) switched on airplane mode last week, I'm no more able to switch it off and go back to wifi connection.
No more WiFi / airplane mode icons in wifi window on the taskbar, no more airplane mode option on network settings...
Everything disappeared, apart from the airplane mode icon in the right corner of the screen, which I can not switch to WiFi mode...
View 1 Replies
Nov 2, 2015
I have my laptop at work and have had no trouble connecting the company WiFi (they have Guest WiFi and a WiFi where you need to enter your company provided Username and Password). I have been connecting using my Username and password. Today I had to change my company login password. Now when I try to connect my laptop I get a "can't connect" message because the password saved in my laptop is no longer valid. But I can't find a place in Win10 to enter my new password.
I remember the first time I logged onto the company WiFi a Windows popup came up asking for my Username and Password (which was saved so I didn't need to enter it again - until now). This time not getting the popup - it just says "can't connect".
View 7 Replies
