Well, not exactly. I have NAS drives and mapped them just like I did on my Windows 7 laptop. It all works fine and the NAS drives show up just fine in network link too. Everything is Ethernet connected. But I see anomalies. If I reboot my machine, or even turn it off and switch it back on fairly soon after then I occasionally get a message about one of the drives being unable to connect. So I then go to 'this pc' and see a Red Cross through one of the drives. If I double click it then it either connects instantly or I will get the green bar filling for about 20-30 secs before it connects. I only have to do it once as after that access is instant every time I go to it. Now this doesn't happen all the time and it never happens if I turn the machine off and start it up after leaving it alone for an extended period. It just seems to be more likely after doing a restart or turning back on within minutes of it last being on.
but I do also notice that when I am in outlook and someone sends me a file (such as jpg pic) that I want to save to my NAS drives. I will click the attachment and select ' save as' and navigate to one of the NAS drives and it will not browse its contents straight away, you can kind of see it trying to open up and eventually after a few seconds it suddenly responds. And again it only occurs once, subsequent navigations all react instantly , for example I go into a second attachment to save down. It's hard to explain but I am inclined to think Windows 10 is just plain buggy . It's not as if the networking is a complete fail. It works but it's just unpredictable. My other Windows 7 machine (which I will never ever let Windows 10 get into it) behaves flawlessly with the NAS drives. They are always live and instantly accessible to it regardless of whether the machine has recently been on or restarted.
I have several server drives mapped to my Surface Pro 3 tablet, and from time to time they disappear from Windows Explorer and XYplorer (an Explorer replacement). They are still there and mapped, as Net Use shows them mapped properly. But to get them tho show up in either Explorer or XYplorer, I have to physically remap them (right click: Map Network Drive...) and when I do so they already show up with the proper drive connection but won't appear unless I finish the remapping. XYplorer has a tool to reconnect all network drives, but nothing happens there.
Installed Win 10 on network client. I have 8 mapped drives from the server and on a regular basis 1 or more of drive are lost. They come back on their own usually a short time later. This causes major headaches when programs using files on the drives lose the connection while files are in use.
it was working back on 10049 and then i updated to 10051 and it still was working fine. but recently i did a fresh install and now i can re add a network device
i have a "New" Nintendo 3ds and i cant setup the MicroSD management which requires you to add it as a network drive
like N3DS
in the network tab i can see it but when i click it it says
windows cannot access N3DS
error code 0x80070035 the network path was not found upon clicking troubleshooting the problem says the remote device or resource wont accept the connection..
I purchased a new computer running Windows 10 (build 10240) today and have set up the windows. However, it will not allow me to connect to my WiFi. When I use the network option in the task bar, no wifi networks are shown and it says that there are no connections available. When I access the network settings, where the different sections are listed on the left-hand side, WiFi is not an available option.
Updating drivers Deleting drivers and then allowing the computer to reinstall A few different command prompt methods such as resetting the TCP stack, as well as trying some that were for people who upgraded from windows 7/8.
Changed my wifi name and password. After that I`m unable to type the password. After clicking connect it loads for a while showing "checking network requirements" and it ends with "cant connect to this network". Password box does not even show up!
I recently upgraded to windows 10. i started having a series of problems but they eventually fanned out but I still am unable to connect to the internet via wifi. I have to use the ethernet cable.
This issue arises randomly and only once has it ever recovered. Event viewer also does not show anything either. Restarting fixes this issue, but I would rather find out what caused this issue in the first place.
I cannot connect to any sites using HTTP or HTTPS but I can connect to my remote FTP server and PING works for any website. I have used 'netsh' in an attempt to fix my issues but it requires a restart where it would fix it temporarily.
I also cannot access any local IPs or my localhost web server. I can however access some of Google's websites on Google Chrome Dev but not on any other browser. For the other sites I get a TIMED_OUT error. I have reinstalled my network drivers and reset my network settings (including DNS) but nothing else works.
I even turned off Bitdefender Firewall and Antivirus and Malwarebytes and issued a system scan but does not impact anything.
I have been unable to do a direct cable connect. Settings are not available. In settings, to do a cable connect it asks for a name and ISP. There isn't any. I never had a problem doing this before and I can do it with my apple computer. It has now been 2 days trying to figure out how to do what should be the easiest connection. No problem with any wireless----not everyone has wireless! Your microsoft stores have a long way to go to match the apple stores. If you can't get a connection to the internet it is very difficult to communicate or download any patches.
I have 2 machines connected via a switch. They both have shared folders. They both run a piece of software. One machine acts as a master the other connects to it for data.
The issue is that the "Server" service is randomly stopping on the master and none of the shares work. The software on the second machine is crashing because it can't see the shares on the master. Windows explorer can't see the shares either.
Once this service has been started the software works fine. I have set the service recovery to restart on all failures but this hasn't resolved the issue. Why this stops or how to rectify the problem?
I recently upgraded my PC to windows 10 and every since have been unable to access any USB external drive. The laptop picks up the drives and acknowledges that they are there and working but they do not appear in file explorer. I have looked in disk management and the drives are there and healthy. The USB ports work 100% as i have plugged in keyboards etc to test and all the drives i've tried work with other computers. I've reinstalled windows twice. Ran various disk cleanup utilities, checked for hidden drives etc.I need to upload video files to my laptop to edit for work.
I downloaded Windows 10, uninstalled my anti virus and disabled my firewall. I am unable to connect to the internet (Ethernet) on Windows 10, I've check the IPv6 and IPv4 which are both activated. I may need the drivers but I'm unsure how to do it.
My other issue is I can't revert back to Windows 7. Apparently my PC deleted the Windows 7 files downloading Windows 10. I tried using the windows disc to format my ssd to clean download Windows 7 back onto my computer, but it wouldn't let me for some reason.
So if there is an easy fix for the internet issue, ill keep Windows 10. But if it's going to take me all day of troubleshooting I'd much rather format my computer back to windows 7.
GTX 970, i5-4460, 8GBs of ram, Sabertooth z87, 650w PSU
The internet functionality works fine on his PC after upgrading from Win 8 to Win 10, though there is one problem that we cannot seem to figure out. Whenever the computer is restarted, it somehow cannot connect to the internet. This is especially weird because it will connect after being booted up from a full shutdown.
I should also mention that this is connected via Ethernet cable, not WiFi.
I installed windows 10 on a new SSD which is currently my drive C:. There was a windows 7 which was on drive D: but I never uninstall it. Drive D: was working normally until during boot today windows decided to do a checkdisk on drive D: (dont know the cause), which tried to repair it.
Currently I totally cannot access my drive D:. Tried to grant permission to myself to assess it but failed, keep having errors such as this ....
After the latest update yesterday of win10, I was able to connect to the internet. But once my laptop was shut down, I've been unable to connect since. Rebooted wireless remote and double checked all of the connections. Defender took over as my firewall from Advast. I've been able to shut off Defender but am still unable to connect to the net. In my wanderings, I did come across "report" that information was being sent but nothing going past some unknown firewall. As far as I know there are only 2; defender and Advast.
I'm running Windows 10 (upgraded from 7 a month or so ago) on an HP Pavilion g6 laptop. My computer suddenly stopped being able to connect to the internet a few hrs ago and now no website opens in any browser. Torrents work fine, surprisingly.
Troubleshooting gives me this "Your computer appears to be correctly configured, but the device or resource is not responding" ... I tried the flushdns, registerdns, ... routine but it doesn't work. Switching the router off and on again didn't work either.
When I try to change the DNS manually in advanced adapter options, on selecting 'validate upon exit' and closing the window, I get this message "Unexpected condition occurred. Not all of the changes could be made".
Upon googling I noticed on some forums people were pointing fingers at Virtualbox Bridged Networking Driver and VMWare Bridge Protocol. I can see these in the Properties window, but upon trying to uninstall these, I get another error 0x8007007E
I have uninstalled VMware, but the damn protocol is still there. I'm not sure if that is really what is preventing me from making changes to the Network's properties like DNS and IP ...
I have a VAIO F Series VPCF217HG that I just upgraded to Windows 10 a few days ago. So far everything worked fine except one problem.
I have a perfect internet collection, as in I am still able to go on to websites and download/upload stuffs, but every time I try to use any of the Microsoft features, it keeps saying that I don;t have an internet connection. I cannot use Cortana or Windows update and a lot of other features. I tried to use the ""Use SSL 2.0""Use SSL 3.0""Use TSL 1.0""Use TSL 1.1""Use TSL 1.2"" fix but it did't work.
I thought it was because of my outdated Mcafee, so I uninstalled it but the problem still persists afterwards.
I have a Microsoft account set up with a pin. Every time I boot my computer up, I am greeted with the login screen and my photo, with the message below it, "We are unable to connect right now. Please check your network and try again later." And it's asking for my password, not my pin. For some reason, I see my username twice on the lower left corner. One is the password log-in, the other is the pin. I can successfully log in with either. I just want to know, what is with the error message? I've got a connection, so I can't figure out why.
I have two computers both now running Win 10. One is hard wired to my router, and the other is on wireless. I am not using Homegroups....just the old method of work groups, which used to work pretty well. (I also have some XP computers.) The computer on wireless can see the C drive on the hard wired computer, but not vice versa. I shows the C drive but when I click on it says it can't be accessed. I have set all the permissions for the C drive on that machine, giving full access to "everyone". I went to the Security tab and set the parameters to allow access for authenticated users. (When it runs through the files it frequently hangs with an error message, but continues when I hit return.)
We have 2 desktops, 2 convertibles and an hp tablet. We started with total mess network wise - tried most of the fixes and none really worked. I removed homegroup and started over making sure ALL units were in homegroup and still had problems. After many tries of fixes etc. I discovered two of the units were in different workgroups??
We are finally able to see all computers on all the computers but are left with two network drives which show up as media units but never show up and available in the computer area on all computers. Both show up fine on my desktop but never on any of the other units.
Have rebooted, checked settings and what to check now. We have used networking of some sort for years and depend on it - have been without it now for way too long.
I am having problem adding folders from a network drive to the Quick Access.
Firstly I can only drag and drop into the QA in explorer, as right clicking option doesn't work and it only allows one folder at a time to be included. Local folders are not a problem and any number can be included in QA.
Also pinning files to taskbar apps has a similar problem if they are on the network drive.
