I currently encountering a problem restoring files from the shadow volume. I do not see any version history when I click the previous version history tab. Using a third party tool like shadowexplorer I am able to see the previous versions. Exporting the files out from the shadow volume also is incomplete with file errors. Any way for me to restore fully some files from the shadow copies ?
View 3 RepliesWhenever I do the File History Backup; at completion it gives me the following message: "Backup encountered a problem while backing up file C:UsersAdminSkyDrivePictures. Error: (The system cannot find the path specified. (0x80070003))". I believe this occurred for the first time after I upgraded from Windows 7 to Windows 10. I no longer have a SkyDrive folder it was replaced with a OneDrive folder. For some reason it is still looking for the SkyDrive folder. In the "Exclude from File History" screen I am unable to exclude the SkyDrive folder. I guess that doesn't surprise me because I no longer have SkyDrive folder. How then do I prevent this error occurring when doing a File History backup?
View 4 RepliesI've been using Backup & Restore on some Win 7 systems but now I have added a new Win 10 PC (from HP).
It's not entirely clear to me why I would use the Win 10 File History facility versus Win 7 Backup & Restore. File History looks like a partial backup. I'd prefer a full backup. Win 10 advertises creating a System Image but I don't consider that an alternative to a file backup with all the files (mine and the system's).
I'm having trouble setting the windows 10 file history drive. The drive I'm trying to use is Y: on disk 4 in the disk management image attached, which shares a 4TB hdd with another two partitions. It uses GPT and is a dynamic disk. All partitions are formatted as NTFS. When I go to file history and attempt to set the drive, only another partition on a different hdd is selectable which I would prefer to not use.
I was able to use this drive for file history up until I reinstalled windows 10 recently, where I formatted down to windows 7 from windows 10 tech preview, then upgraded to windows 10 to activate my old win 7 key. This was done after a recent major hardware upgrade (motherboard/cpu/ram). The 4TB hdd wouldn't have been touched by any of the windows installation procedures and I haven't set any page or hybernation files to it. The only difference is that it's plugged into a different motherboard. The old motherboard was a Gigabyte GA-980FXA UD5 (rev 2101) and the new one is a Gigabyte Z170X-Gaming GT G1 (rev 1).
I've had a look around on the web, and solutions have asked to remove any folders on the partition from libraries, which I have done as far as I can tell, with no success (there weren't any in the first place, but there were some on the other partitions which I've removed). Another solution was to share the partition with full read/write access to everybody. This did work, but it seems like terrible work around rather than a fix.
I'm guessing this might have something to do with the GBT/dynamic nature of the disk, but if that was the case then it shouldn't have worked before the reinstalls as it should still be the same.
I have been using file history on Windows 10. It is very unpredictable. File history is backing up to external drive, but it has coupled the entire "C" drive. In file explorer I have two "G" drives. I thought it only backup recent files not duplicate the drive.
View 7 RepliesI have custom libraries set up to back up my X:Pictures directory and it's been backing up just fine. I dumped a large amount of pictures to a sub folder and didn't get around to deleting the bad ones before file history threw them on my history drive. No big deal, I went through the files at their main location and deleted the bad ones and then simply deleted the entire sub folder from the file history drive and then forced file history to run.
It's no longer backing them up.
I changed my settings to back up every 10 minutes and keep forever and forced again.
There's about 800GB of free space left so that's not an issue. I tried a restart and I even tried to wait the 10 minutes. It's still not backing them up again.
If I delete a file inside that sub directory and leave it in the recycle bin and then go to previous versions for the sub folder, it shows previous versions. When I choose to restore from one, it tells me the file is no longer in the location. It seems there's an index somewhere that needs to be deleted that's telling file history that I have files backed up that I manually deleted. In relation to that, what's the best practice to remove backed up files that I wouldn't mind backing up again. The scenario I pointed out happens quite often actually. I take a thousand pictures and don't get to deleting the bad ones before file history backs them up.
Is it possible to invoke the file history backup procedure for a certain time? I'd like to be able to configure it to backup over night only (i.e. at 2am) - but I can't find a way to be able to set it to certain time.
View 1 RepliesI had File History turned on an old machine that I'd upgraded to Windows 10. The machine was working fine with File History backing up files to an external storage drive. The machine died recently (motherboard completely not working) and now I have a new machine with Windows 10.
However I want to restore my files from the File History backups I had for my old machine, but I can't figure out how to make it work. Whenever I try to use the same external location as my File History drive it just makes a new backup with a different folder for my new machine.
How is this supposed to work?
So I have file history on and working. If I enter file history options via Start menu/settings/update & security/backup/more options/ there is a list of folders under "back up these folders" all prefixed c:users"myname"
Above this is an "add a folder" option. When I click on this and choose a folder that isn't under the "users" folder I get an error saying "But that didn't work. To find out more, look up error code 0x80070032"
Now I've looked up this error code but nothing I've found relates to file history. I'm only trying to include a seperate folder on a local drive.
I've read file history will only backup folders in Libraries and documents so why is there an option to "add a folder"?
I've tried adding the particular folder to a library but when trying to add that library under the "add a folder" it says you are trying to add a library you need to add a folder?
When I installed windows 10, something went wrong and I could no longer could connect to the internet because some protocols were missing. Also, within five minutes of starting using my computer, the start menu stopped working. I have tried all the fixes I could find for the start menu including sfc /scannow and multiple powershell fixes. None of them worked. When I use the windows 8.1 install disk it, I get a message saying that something happened, setup has failed to determine supported install choices. Windows 10 is difficult to navigate and always seems to be missing some software.
View 2 RepliesI was installing W10 and got that black screen with the big white circle. Then, once it restarted. When it booted again, suddenly a screen came up saying "Attempting to Recover Installation" then saying "Restoring your previous version of Windows....". Why does this happen? Is there any way I can change where it boots into?
View 1 Repliesi bought my laptop 2 years ago, and it was running windows 8, i had a lot of trouble with it and decided to downgrade it to windows 7, i pirated a windows 7 ultimate edition and my computer worked ever since, now i want to upgrade to windows 10, i have the icon, i reserved my copy, but it has been downloading for more than a week, and when i click view download progress, the get windows 10 app just shuts down. is there any way for me to get a free upgrade (using the windows 8 key that came with my laptop) to windows 10?
View 5 RepliesThe update gets somewhere around 75-80%, but then it says "restoring previous version of Windows." When I load up Windows 8.1 again, I get this error.
View 10 RepliesDuring the week i had the windows 10 upgrade install onto my Toshiba Satellite laptop that was running Windows 7. Windows 10 did open but then crashed as it was booting up stuck in an error reboot loop. So i tried to restore the previous version of windows and it has been stuck in the boot cycle ever since. It will run a continuous loop restarting the process every 10 mins. I can't get it ti get out of this reboot loop. What to try and get my laptop up and running.
View 2 RepliesI am running Windows 10. After having been away for 6 days something strange is happening when I turn my computer on. The "start screen" displays a message saying "Restoring your computer to a previous version of Windows" and I can see that it is working on doing something. I quickly turned it off.
I have updated antivirus/antimalware programs that I run frequently/automatically.
What can be going on, and is there a way to avoid this restoring to start when I turn my computer on?
The download of w10 got completed and the installation after 95% restarts and says restoring your previous version. now it is again downloading the 2700 MB.
View 1 RepliesNow that my computers are updated to Windows 10 , are the old back up disk images with win7 of any use ? Can they even be used to revert back to Win 7 ? Should I just delete them and make new disk image with win 10.
View 6 RepliesSo this is pretty critical: I use Win8.1's built-in File History back up to my external drive and it works great. What I need to know is, when I upgrade to 10, will it be able to bring that back up into 10 even though it was done on 8.1? Otherwise I'd have to go do it all by file; having it do itself would be much preferred.
View 2 RepliesI use "Photos" app as default viewer when i manually open a picture file from explorer. I don't really like it, except for its touch feature but i give it a try..
One missing feature is that once i opened a file in it from explorer, i can't browse others files in same folders from application. Is there a way to enable this ability ?
I would like to clear my Reliability history after doing some program testing that generated a lot of errors. I cleared out all of the Event logs, but a number of errors are still showing in the Reliability history.
There was a tutorial in the Windows 7 forums as well as a similar Win 7 solution with a batch file at the Windows Club.
It appears that the files used to be stored in the ProgramdataMicrosoftRAC folder, which doesn't seem to exist for Windows 10.
I am trying to backup my data (not a system image) to an external hard drive Although I have succeeded in backing files up the system does not work automatically (as it implies it will) and the only work around seems to be to select an alternative drive each time.
In addition if I use File History to attempt a backup the system appears to write to the external hard drive but nothing gets recorded. There is sufficient space for the data (12GB - hard drive total size 120GB) so I do not think it is lack of space.
I currently do File History with 1 external HDD as everyone else does. I have a spare external HDD that is just gathering dust. I wonder if I could do File History with 2 external HDDs? Will I run into trouble if I did?
The idea is that I could do File History with the 2 external HDDs on alternate days, so if the internal HDD and one external HDD happen to die on the same day (very, very unlikely, I know) I lose just one day of backup at the most.
Just noticed the files that have been saved to my remote HD via file history are all saved twice, is this normal?
View 2 RepliesI'm trying to use File History to backup to a NAS. When I deselect folders to monitor, they get backed up anyway. Need using File History successfully?
View 1 Repliesis there a way to disable or not show any previous searches that have been performed for the windows explorer?
View 3 RepliesI'm using File History to backup my files to a external drive. This works fine. However, I would like to save a backup copy of my data on 2 different drives. I can't seem to be able to find a way to add more than 1 target backup drive in the settings.Is it at all possible to add multiple target drives to File History?
View 2 Replies