Performance :: Reboots After Logo Then Black Screen
Nov 23, 2015
My basic specs:
CPU - 5960X
MOBO: ASUS Rampage V Extreme
GPU: GTX 980
I turn my computer on, see the BIOS just fine, it shows the Windows 10 logo, then a black screen. If I move my mouse around, I see the cursor. After nearly 30 seconds (i'm guessing), my computer reboots itself, and the cycle repeats.
My motherboard is kind of funky. By pressing F8, it actually goes into a BIOS menu that allows me to select which device I want to boot from, instead of going to Safe Mode. This is what I'd like to do, actually, so I can choose my last known good configuration.
Is there any other way to get to this screen to choose my last known good configuration, can I use a USB flash drive and boot to it to get to a repair screen or what course of action should I take?
I'm experiencing a strange problem on my secondary desktop (the crappy Alienware). Randomly, the machine restarts within a mere 5 minutes of it running.
It also restarts just sitting on the login screen, so it doesn't only happen when someone is logged in. It, of course, doesn't do this in Safe Mode.
So a few days ago I installed Windows Vista after Windows 7 wouldn't work and I couldn't figure out how to fix it. Vista worked fine, but after a day I somehow managed to shut off the pc while it was updating. I thought it wouldn't be that bad, but it was. When I booted Vista, it would show the normal loading screen and after that the screen would go black for 1 minute. Then the pc reboots itself.
I thought I could fix this by putting Windows 10 on a cd and installing it, but it didn't. At first I got an error from my monitor saying that Windows' resolution was too high for my monitor (my monitor's max is 1024x1080) so I went into safe mode and changed it.
I thought it would finally work, but again it didn't. It showed the same error from Vista; normal Windows 10 loading screen, goes black, reboots.
Yesterday my friend installed windows 10, but encounters an issue when logging in. He types in his password, but it says its invalid, he then clicks next, but then the screen goes black then reboots.
He has an HP Pavilion desktop.
Is there any way to revert back to windows 7, which he was previously on?
win10 after showing logo black screen take 2 to 3 mintus to show welcome screen. amd radeon dual graphic card 7400+6310 driver amd site shows it a latest updated driver ...
I turned on my pc and it froze right after it passed the Blue windows logo screen. A black screen appeared with no cursor.
I rebooted the pc (through the reset button) and everytime it got stuck at the black screen and then rebooted on its own. After a few rounds of black screen and reboots, I got the advanced repair options but it couldn't repair anything.
A very few times that it did manage to go boot and go to the desktop, it froze and didn't let me open any files or folders. Also when I mouse over the files, a black box appears around the icons and the file names appear garbled
I haven't installed anything lately that might cause this to happen.
on my dell laptop I installed windows 10 perfectly fine. I then did a restart of the laptop but every time I turn the laptop on the dell logo shows up and then...... Nothing. Just a black screen. how to fix?
I have installed windows 10 on my computer a month ago and it worked well , but now i have a problem : the pc load , windows 10 logo appears then black screen and the cursor appears ... I havn't changed anything in my configuration nor installed any new software and no upgrade ..
My hp 500-110et just sits there with a blue hp logo(changed crap as the windows logo). I noticed something, the "loading ring(the one which shows that windows is loading/booting/starting up)" isn't there from the start.
I ran disc repair, it said it would take more than a hoır, but it never finished, so I had to close it. I was just playing AC U, then it froze, so I had to shut my system down from the power button... After I started my pc... you know what happened.
All was good and well, until my Windows 7 on another drive gave me an NTOSKRNL.EXE error (fixed now). My Windows 10 booted fine at this point, but after entering my password, it was stuck on "logging in" for quite some time. I forced a reboot, and then I was stuck in the "Performing Automatic Repair" loop.
I eventually got out of this, only to be greeted by a "BAD_SYSTEM_CONFIG_INFO" BSOD. After replacing files from RegBack, I managed to get it to boot, but now I just see a black screen with no cursor. I've tried logging in and I had Chrome Remote Desktop but that didn't work either.
It's really not okay for Windows to just mess up randomly. The NTOSKRNL error from the other drive COULDN'T have caused this problem.
Today when I tried to reset my laptop my battery died (I got up to 29% on the reset), because somehow my charger got unplugged. Now when I turn it on I get to the Logo (asus) then get a black screen. (I have tried taking the battery out and pressing the power button for a couple seconds and I got nothing) I don't know what to do!
How can I enter the "choose an option" screen, the blue one. I can reset there. I chose continue to windows 10 and now I keep getting black screen after logo. is there like hotkeys to press while turning on?
Computer boots to windows log on,have no password here.After a minute on log on it go to a black screen,stays there forever. I can get to Task Manager from black Screen,lost on what to do next. Just want my Windows 10 back, not sure what caused this problem.
I have a Windows 10 pc I have never had problems with I was playing wow just now and the screen went all black and the computer kept running. The monitor said no connection found despite being connected to the tower that was still running. Naturally I tried restarting the computer manually. Now turning it back on nothing happens; the blue power button blinks orange; and makes a very loud clicking noise. This happens even when the power cord is plug in and you don't touch any buttons. I opened my pc and cleaned the fan still nothing.
Turn the power on and the computer boots very quickly to a very dark black screen. I can just make out the desktop but not clearly enough to do anything. Power off then on again and it boots correctly but very slowly.
I upgraded my preview build of Windows 10 (10130) to the pro final version because the preview wasn't able to find additional builds and kept crapping out on standard updates. All went smoothly, but the first thing I noticed is that the next time I booted cold, Windows 10 would get past the "starting windows" screen and play the startup sound.
However, the logon interface never appeared, or the cursor. All that was displayed was a solid black screen. I hard reset by holding down the power button and tried it again, which gave me the same thing. Again, hard reset. This still commonly happens, along with my CMOS date/time settings apparently being wiped after such reset. Sometimes the cursor appears, but mostly it doesn't.
Usually after trying enough times it'll pull through or by starting it after selecting a recovery option from F8. "Enable low resolution video" I know worked before, but it didn't give me low res display. (Not that I'm complaining) It could likely be because I installed over the preview, and in-place installations typically have issues. I'm also running a program to provide titlebars with aero styled glass transparency, and my graphics driver is up to date.
A number of Windows 10 users have various shutdown-related issues. The most common issue is that their PC reboots instead of shutting down. When they click shut down in the Start menu, Windows 10 doesn't shutdown, but instead restarts. Here is what you can do to avoid this issue.
Actually, it is hard to tell what is the exact cause of such behavior, because the reason can be different from PC to PC, but in this article we will explore some solutions which can be useful if you are facing this problem of your PC rebooting instead of doing a shut down with Windows 10.
1.The first thing you have to try is a clean boot. Using a clean boot, you can find if the OS is damaged by some third party app or a bad driver. By preventing them from loading, you can exclude the influence of these two factors.
For the last 3 weeks anytime I "restart" my hp 32 bit pc it takes 6 minutes and all the while the screen is black with a small blinking light in the upper left corner everything is fine after it finally restarts and if I shut it down and start it back it starts normally and in the morning when I first start it up it starts normally it just happens any time I restart it for any reason.
My laptop, running Windows Ten from a clean install, has issues with the sleep function. About once a day, when I either put the computer to sleep or when it does it on its own, the screen will go black but the computer will not stop running. All the lights are on, the fan and disks keep running. Nothing works to turn the screen back on and my only option becomes to force a shut down.
I've tried tweaking all the power options in various ways, I've tried disabling/enabling hibernation/fast start and I've searched for an answer but I do not have one.
Every time I switch on my PC I get to the loading Windows screen and then my PC reboots, it only does this once and on second boot it boots into Windows fine, even tried a fresh install on Windows and it's still the same, can't see anything in the event log only this.
The last shutdown's success status was false. The last boot's success status was false. All drives are up to date, PC running fine with no issues apart from the above, I don't use sleep or hibernate and power to the PC is switched off from the mains.
I have had this issue for a long fing time now. like at least 10 clean installations of windows and it still keeps on happening. you can only imaging the amount to frustration im going through right now. I just did another clean install and now im trying everything to avoid this. I even tried switching to enterprise version of windows
I get this issue where the boot logo (win logo with circle) shows up twice. like once and then the screen goes blank for a sec and then i see that shitty thing again but its laggy this time.... I think this is the problem that finally leads to the start menu disappear thingy..
When i boot my pc up, it can successfully go into bios, but once it reaches the windows logo where there is usually a loading indicator underneath it, it freezes. the loading indicator is not there, it seems that my usb ports quit working (my keyboard and mouse stop lighting up).
I've been having this problem for quite a while now ever since i upgraded from windows 7 to windows 10 however i was able to successfully do a usb boot and wipe my hard drive and install windows over again, and I've been completely fine for about a month now, but the same thing is happening again.
I am guessing it is a corrupt windows file but i find it odd that its recurring even after i did a total wipe. Also I ordered a new ssd (500gb samsung 850 evo) to replace my current hdd, maybe that will fix this problem? I am also planning on upgrading my cpu, mobo, ram, and gpu soon. i will leave my current pc specs below.
I have not found any problems similar to this online. to make things clearer, i cannot get my pc to do a complete boot at all. it always freezes on the same screen, the only way i can get out of it is to do a force shutdown. I am starting to think that perhaps the problem may be my video card? also i do not have any spare parts or other computers to switch parts and test unfortunately.
After doing multiple things to find a fix (swapping ram slots, unplugging hdd and gpu and plugging back in, etc.) while on the frozen windows logo screen i unplugged my mouse and keyboard, plugged them back in, hit the restart button on my pc, and.. it started up? now i have noticed lag-like performances with my mouse (razer deathadder chroma) its as if it loses connection for a split second and the lights on it will simultaneously flash. the mouse is only a month or two old and i do not remember if i had problems with my old mouse.
I have just plugged it into a usb port that is on the side of my pc instead of plugging it into one of the back ones. I will update with if needed for the "lag" however i am still concerned with why exactly it froze like that during boot up. im not going to shut down my computer until i know what the problem was and how to fix it. ill just keep it in a low power setting when i am not using it.
The other day, I tried to do a factory reset on my laptop, but it failed, and I could only click cancel. Now, when I booted up my computer, it goes to the ASUS logo, then a black screen, still backlit, with an underscore flashing in the upper left corner of the screen. I can access the BIOS, and have been trying to do boot overrides. I don't have the ASUS Recovery partition installed on the laptop, and I don't have any possible ways to install an ISO. T
