So recently I've had trouble with DLL files and launching games on my PC. I've decided to do a fresh install of Windows 10 via a bootable USB. However my PC will just not boot from it, I've tried setting the Boot priority in both the BIOS and boot menu, I've even tried disabling all boot devices bar USB, yet for whatever reason it still boots into Windows.
My motherboard is a Gigabyte GA-78LMT-USB3 (Socket M2).I have the bootable USB plugged into my front USB 3.0 port, dunno if that makes a difference.
In the first week or so, Windows performed quite smoothly (albeit with some slowdown playing games) and was for the most part perfect.
However, quite recently my experience with Windows 10 has been so poor that I am regularly unable to even boot up my PC - being greeted by an alarming 'beep' sound, followed by an immediate shutdown. In the rare circumstance where my computer actually does turn on properly, whenever I open Chrome or Edge it shortly freezes and I'm forced to hard reset my computer.
I have tried reinstalling Windows 10 (deleting most of my files with it) but to no avail. I have noticed that on the task manager the 'Disk' column is quite often red with 99% usage -
I found my laptop was stuck in some loop, it wasn't able to boot up and offered me to automatically repair it, however it doesn't solve anything and I've tried doing a full system reset to it however the same problem occurs still, it just doesn't boot and offers to restart and try to repair again or more options. I have tried different commands such as the SFC, CHKDSK, but got no where.
Laptop is Windows 10, Asus k501-U, i7 6500u, 12gb Ram, HDD 1tb + 16 gb SSD ...
When I do start up repair I got this message a few times: 'Start up repair couldn't repair your PC...
Log file: C:WINDOWSsytem32LogfilesSrtSrtTrail.txt
And when you do CHKDSK (I think) end error message is 'Failed to transfer logged messages to the event log with status 50'.
My problem is that I can't access UEFI Firmware settings or Boot from USB/DVD in the Advanced startup. They are missing. What can I do? I want to go back to windows 8.1 (Don't have windows.old folder), but it gives me an error when I install it when windows is running. That's why I want to boot from DVD, but I can't.
I have just used the SHIFT-Restart option to activate the Windows 10 Troubleshooting and tried to open a command prompt. It asked for a password. I entered my password but was told it was incorrect.
I booted normally using the PIN I normally use, and went through Settings | Accounts | Sign-in options | Change to change my password. In the 'Old password' box I used the same password that had just failed to get me into the boot command prompt and it allowed me to change the password. It said I had successfully changed my password.
If I use SHIFT-Restart again, I still cannot get into the command prompt using the new password.
Am I dealing with two separate passwords here? If so, how do I change the one associated with the boot command prompt?
Note that when trying to boot to the command prompt, the displayed use name appears to be correct - i.e. it is the same one listed when I use my PIN to boot normally.
I recently installed Windows 10 from 8.1 on my HP pavilion laptop (I got it just over a year ago, not sure the exact model). All I did was go through the free upgrade process.
Everything seemed to work fine in the first 24 hours, but now I encounter a blue screen with grey lines when I try to boot. Eventually, after a few attempts (on its own) at rebooting, I get to the repair/restore screen. System restore hasn't worked in the few times I've attempted it, and I can only boot up in safe mode without networking.
I have no media disc for Windows 10 or anything like that, and I'm relatively inept in programming.
I returned home from work today to find that my computer won't boot. Great, it's going to one of those weeks... After the bios screen and the windows 10 logo, the computer hangs on the following screen, blue background with the spinning white dots. It looks like it's trying to log in, but it gets stuck. The dots never freeze, or at least not in the hour or two I've left it- it just keeps spinning and trying to log in. Before I go further, I'll give you some specs:
Homebuilt Windows 10 desktop, up to date (upgraded from 7 months ago) Gigabyte z87x ud3h mobo Haswell i5-4670k Nvidia 780ti 8gb ram
Ok, where was I. The strange part about this is that everything was working fine yesterday, and I didn't really do anything since then. I upgraded from W 7 to 10 months ago and it's been working fine. There were no windows updates yesterday (Feb 22nd), and I didn't install any other driver or system updates. In fact the only things I did install were the Steam VR test and a game on steam. Nothing else was changed since the last time it booted properly.
Now, onto what I've tried. I'm at a bit of an impasse here because I can't really get the computer to do anything. Booting into bios works, but that's about it. I can't get into safe mode (W10, F8 doesn't work, can't restart into it from desktop, or from login screen).. I've messed around with cables inside the tower, plugged and unplugged hard drives. In the course of restarting many times, I got a "bios corrupt" error, after which it started recovering into the secondary bios (losing all my OC settings and other bios settings). But the problem persisted.
I then tried updating my bios, but I keep getting "invalid file" messages when I try to update from bios/Qflash. Finally, I didn't have a W10 recovery drive, but I downloaded one from Microsoft. Startup repair says it cannot find any issues, and attempting a system restore gives me the error "you must specify which windows installation to restore. Restart, select OS, then select system restore." that doesn't seem useful. Ok, on to command prompt. Trying to enter safe mode from here gives me a "boot config data could not be opened. System device not found."
I just build a new machine with a Gigabyte B85M-D3H mobo, Intel Pentium G3258 CPU, 4GB Corsair Value Select DDR3 1333 and 120GB Samsung EVO SSD. I now want to clean install Windows 10 Home (64-bit) from USB drive (created with media creation tool), but the machine is stuck in boot loop. The Windows logo appears for a few seconds and then the machine reboots, I don't have clue where in the boot process something goes wrong.
I already tried with a usb stick with Windows 8 installation files and this starts without issues. I made sure Fast boot en secure boot were disabled but without success. Also already reset the BIOS with optimized settings.
The stick boots till the first screen on different other machines.
I have a dell inspiron 7000 and recently reinstalled windows 10 into my laptop after I received a system thread exception not handled error with a bootable usb. After painstakingly spending a whole day (10 hours) I succeeded in restoring my laptop with windows 10. Nevertheless, I accidentally restarted my laptop while the bootable usb is still in the usb drive and now my laptop does not even load/boot. The screen just freeze trying to load up the OS as in the spinning dots when the windows first loaded up, after 3 dots loaded, the whole screen freezes. in addition, when I try to load up windows repair, it'll load up an extra dot and freezes at 4 loading dots; I can't even load into the hard-drive through BIOS. The good thing is that I can still access the BIOS and do diagnostic test and all the stuff from BIOS. Other than that, I'm unable to access my computer.
run down of errors when i try to do automatic repair:
1.Troubleshoot>Reset this PC>Keep my files> = error: The drive where Windows is installed is locked. Unlock the drive and try again.
2.Troubleshoot>Reset this PC>Removes everything>= error:Unable to reset your PC. A required drive partition is missing.
3.Troubleshoot>Advance options>System restore>= error: System restore: To use System Restore, you must specify which Windows installation to restore. Restart this computer, select an operating system, and then select System Restore.
4. Troubleshoot>System Image Recovery>= error:Windows cannot find a system image on this computer. Attach the backup hard disk or insert the final DVD from a backup set and click retry. Alternatively close this dialog for more options.
5.Troubleshoot>Startup repair>= error: start up repair couldn't repair PC. Press advance to try other options to repair you PC or "shutdown" to turn off your PC. Log file:
6.Troubleshoot>Go back to the previous build>= Windows ran into a problem and wont be able to take you back to the previous build. Try resetting your current build instead(Troubleshoot > Reset this PC).
7. Install>Upgrade>Compatibility report: The computer started using the Windows installation media. Remove the installation media and restart your computer so that windows stars normally. Then, insert the installation media and restart the upgrade.
8.Install>Custom> We couldnt find any drivers. To get a storage driver, click load driver
when trying to load the USB it says no signed drivers were found. Make sure that the installation media contains the correct drivers, and then click OK
I just want to get my laptop running at this point and probably go back to windows 7. dont mind losing my files cus most were backed up
Due to corrupt windows files my pc is unable to start. i am able to go into the bios, but after that it will freeze on the windows logo during start up. i have made a usb windows 10 installer and tried to start the pc up using that as my hard drive (went into bios and changed it to use that as my hard drive) but it still freezes on the same screen. I even unplugged my hdd and booted up but the same thing happens so I don't believe the problem is with my hd.
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
After installing a 32 bit windows 10 from a USB by mistake I decided to upgrade to the 64 bit version. I have 3 hard drives, one of which is an ssd that I am trying to install the OS to. After downloading and setting up the media creation tool and creating a USB I restarted and boot form USB.
I followed the steps and deleted the existing windows 10 partitions on my dad and tried installing straight to the unallocated space. After the installation completed it restarted the installer, which is not what happened when I previously successfully install windows 10. I then changed the boit order to have my ssd first and rebooted, which gave me the Reboot and select proper boot device or insert boot media error.
Confused I loaded up the installed and there were correctly partitioned installs already on the ssd ( although one partition looked a little small). I tried reinstalling windows 10 with the same result over and over.
My laptop has dual boot - Windows 7 and Windows 10. My Win7 environment is my main working environment with lots of programs installed and important files. I installed the Win10 environment just to play around with 10 during the technical preview. Now, I would like to disable the 10 environment and upgrade the 7 to 10. Am I able to do this, or have I already "used up" my one upgrade on this computer's Windows license?
I notice that in Windows 7 I have not received the icon in the notification area that invites me to upgrade to 10. This makes me think I might have used up my chance to upgrade.
My end goal is to have a single Windows 10 environment. Note that the reason I want to upgrade my 7 environment to 10 is because I don't want to have to re-install all of my programs and files into the current 10 environment.
When I try to boot from a recovery flash drive, it fails with: EFIMicrosoftBootBCD error status: 0xc000000f and message: The Boot Configuration Data for your PC is missing or contains errors.
The recovery flash drive was created on a Lenovo ideapad originally with Windows 8, now upgraded to Windows 10, latest upgrades applied. Checked the box for copying system files. Target drive was a 16GB DataTraveler flash drive formatted as FAT32. Creation ran to completion with no errors. When booting normally, Windows 10 runs fine with no issues. I tried re-creating the recovery drive with the same results.
I created a repair disk and tried to use bootrec to fix the issue, but I suspect it did nothing or fixed the c: drive. I ran boot rec while in the root directory on the flash drive.
As I get ready to do a clean install of 10074 I am curious about the need to disable secure boot and fast boot options. If I do disable secure boot do I need to enable legacy boot?I have had limited success with previous installs to a 2nd hard drive and the problems that arose always seem related to dual booting.
In one instance I did a clean install of 10061 and had left secure boot enabled. In order to get dual boot working I had to disable secure boot, and upon rebooting I needed to change it back to secure. I then made Win 8.1 the default boot and then Win 10 would never boot from the menu, it would just take me back to the boot menu and I could boot into Win 8.1.
I'm making a image for installation of windows 10. I make a USB flash drive with WINPE. and once the device starts into WINPE, it will automatically start to install windows 10 by calling "dism /apply-image". Normally i just shutdown the computer after installation, but now i want to reboot the device and boot into the windows i just installed. But i can't, because if i reboot the device, it will boot into WINPE again and start another turn of installation of windows. How could i temporary boot into my windows 10?
After several weeks of testing I'm ready to go full on Windows 10 and want to get rid of Windows 7 but I have some partitioning issues I want to clean up. I currently have Windows 7 on drive 0 (360 GB) and Windows 10 on drive 1 (500 GB). Both are SATA drives and RAID is enabled in the bios but not active.
What I think I'd like to do is simply swap the drives physically so that Drive 0 has my current Windows 10 install on it and make it primary boot active etc. The drive with Windows 7 on it would become drive 1 and I would delete the Windows 7 partition and re-partition it with a clean empty partition just for extra space.
Second question, any advantage to using this drive configuration in a RAID setup?
I have a legacy 64 bit dual core desktop (ASUS mobo). I have several Sata hard drives in it with the 4th partition of my 1 Terabyte drive containing my Windows 10 Professional boot OS. After converting another similar legacy machine to a NAS device I took the old Windows 10 32 bit OS drive from it and tried booting the ASUS machine with it. Needless to say, the OS didn't like it and reverted to Windows 10 Pro Insider Preview edition (build 11082).
When I tried to restore the boot drive to the original one for this machine the master boot was missing.
I had just formatted another partition on the same drive that had contained a Windows7 installation that had failed. This partition may have contained the master boot record. So I booted to a command prompt from a USB drive and successfully ran the following commands:
bootrec /RebuildBcdbootrec /fixMbr bootrec /fixboot bootsect /nt60 SYSbootsect /nt60 all
After that the BIOS just says "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system" This disk and OS are on the original machine it used to run on. As I understand it, Windows 10 tries to record it's key to somewhere in the BIOS. But the BIOS on these old machines don't provide such a facility. I don't understand what Windows 10 OS does with the key in this instance. If it was recorded in the BIOS then I'd presume that the other Windows 10 drive I attempted to use would have found it and used it. Or perhaps not, since it didn't like the new environment.
what I'm looking for is a way to get my original Windows 10 to boot again on the same machine it had always work on before, from the 4th partition of the 1 terabyte drive I'm using.
I used MicroTool partition manager to delete the extra partitions on an OS drive with win10 (leaving just the main C partition on the drive), and now the laptop will not recognize the SSD with the OS on it, and obviously cannot boot. I also tried using the bootable partition recovery tool from MicroTool, but restoring the partitions also does not work, it will only allow one of the two partitions to be restored.
Basically, I have a really bleepty BIOS that will only let me change the boot order with secure boot disabled and legacy boot enabled. I need secure boot because I just installed windows 10 onto a new drive and it won't activate. I have heard that this has something to do with secure boot being disabled. I still have the activated drive, which is the primary drive. Is there anything I can do to change the boot order?
Control PanelAll Control Panel ItemsPower OptionsSystem Settings
Unchecking the "Turn on Fast Startup" command in the above setting path does not do it. There is supposed to be a motherboard software for enabling a normal startup the next time the computer is restarted.
Today I installed Windows 10 on my machine (ASUS N55SF laptop) for the first time on a separate hard drive. Now I have Windows 7 on my main hard drive and Windows 10 on my new drive (the latter being an SSD one). After installing Windows 10, I got a new boot option in my BIOS called "Windows Boot Manager" which is set as default, but it runs Windows 10 directly, I can't see any boot manager (I can assure "Windows Boot Manager" behaves this way because my BIOS lets me override the boot option, so that I can directly run any boot option, and this is probably the only way I can run Windows 7 currently).
If I go to Start → Advanced system settings → Startup and Recovery → Settings, I only see Windows 10 in the "Default operating system" drop-down menu, while I only see Windows 7 if I do this while on Windows 7. It's like the two OSs are not completely aware of each other.
I wasn't sure which forum to put this into. I created a backup image on a usb hard drive. I wanted to be able to restore it using a usb recovery thumb drive. I used the create usb recovery tool and created the recovery flash drive. When I try to boot from the flash drive I get an error saying that the boot configuration data is missing or contains errors. I can boot up the laptop using the current windows install so it isn't referring to the hard drive. I have tried several usb drives and get the same message on each. Here is a screenshot of the message.
Over the weekend I upgraded from 8.1 (which was working perfectly) to Windows 10. Unfortunately, it had a few problems - namely that it would 'hang' at random intervals (5 minutes to 5+ hours). In an attempt to isolate what was causing this, I was advised to use Msconfig to do a clean boot.
Unfortunately, in the process, I have rendered my PC near-useless, as I accidentally ticked the box "Use original boot configuration" under Selective startup. (I know, I know. I'm so cross with myself.) As a result, I am now presented with what looks like my old boot screen - offering Windows 7, Windows 8, Windows 8.1, Windows 8.1 with Media Center, but no Windows 10.
(I originally had Windows 7 on what is now my D: drive. I ended up dual booting with this and Windows 8, but I'm pretty sure the version of 8.1 - which I've just upgraded to Windows 10 - was a clean install. It's certainly on my SSD (C: drive).)
Anyway, by using Change defaults... - Choose other options - Troubleshoot - Start-up Settings, I was at least able to bring up the screen that gives you Safe Mode as an option. This allowed me to boot into Windows 10 Safe Mode.
I went back to MSConfig and eventually found a way to deselect 'Use original boot configuration' (it was greyed out for a while). However, on restart, it still showed me the old options, i.e. no sign of Windows 10 Pro. It seems the only way I can currently boot into Windows 10 is via Safe Mode.
I've tried various things today - I tried to use Bcdedit to force it to look at the C: not D: drive, and I've tried booting with a Windows 10 DVD and using the Repair option (but partway into the repair process it starts thinking it's a Windows 8 machine again...).
I've just 'spoken' to a chap at Microsoft and he is adamant that there's no alternative (because there's no Refresh option under Settings - Update & Security - Recovery) but to reinstall Windows 8.0, and then upgrade to 8.1 and then Windows 10. As you can imagine, I really, really don't want to go down that route. But, at the moment, I can't even roll back to 8.1.
Given that I can still - sort of - boot into Windows 10, the correct MBR/BCD/whatever must still be on my C: drive somewhere, surely?
My laptop pc with Windows 10 Pro has decided that when given the order to shut down it will do so, but then after 5 seconds or perhaps up to 15 minutes later it will reboot. Something is telling it to restart.
I have already done this to try to stop it: In the elevated command prompt, copy and paste the command below, and press Enter.
