I have just bought a new windows 10 machine. It finds my home WIFI but fails to connect with the message "Can't connect to this network".
I have tried all the obvious issues such as re-booting (every component). I have several windows 7 machines and have checked the configuration of the wireless adaptors and there is nothing different around security, or 802 protocol selected etc. I have tuned off IP version 6 after reading some forums but get the same error.
My router is provided is provided by SKY is:
Manufacturer Sagemcom Model Number F@ST2304 Firmware Version 7.16a4N ADSL Firmware Version A2pD038m.d24h
Whenever I try to connect I get the following router system log:
My first experience with Windows 10 has been extremely frustrating and wasted a lot of time. I see that this is also a very common problem. Equally frustrating is the lack of diagnostic from Windows...I appear to have no way of knowing why the connection failed (hence why I have shown the router log).
Tried to connect to Wifi today and couldn't find how. When I searched for online assistance I noticed that it directs you to the settings and then the network & Internet tab.Except I don't have that tab in settings. Mine is only Network.
Product Name: Hp Omen 15 Operating System: Microsoft Windows 10 (64-bit) Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 184.108.40.206, 220.127.116.11, 18.104.22.168 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
I have a Compaq CQ61-410 Notebook. After upgrading to Windows 10 I no longer have WiFi capabilities. In Windows - Settings - Network & Internet I do not have a WiFi option listed. However, if I go to Control Panel - Network and Internet - Network Connections I see my wireless service listed. I have confirmed that I have the correct drivers loaded - Qualcomm Atheros. When I diagnose this connection I get the following message:
There might be a problem with the driver for the Wireless Network Connection adapterWindows couldn't automatically bind the IP protocol stack to the network adapter.
The Tray icon only shows the network/Ethernet adapter; the wifi icon is missing. Normally I'd click on the wifi icon to connect to wifi networks; that option is not available. Instead I get "Not Connected - No Connections Available." (If I plug in an Ethernet cable, that message goes away. But I need wifi!)
I head into the "Settings" app, choose "Network & Internet", and the topmost tab is "Airplane Mode"; the "Wifi" tab is missing from the Settings app.
I head into the control panel, network and internet, network connections, change adapter settings, and my Wi-Fi adapter is there, enabled, and full green signal strength.
"Intel(R) Centrino(R) Advanced-N 6235"
Disabled it and reenabled, didn't work. Rebooting (twice) didn't work. Full power reset (press-hand-hold power button for 5 seconds) and restart didn't work.
Ran network troubleshooter, it says there may be an issue with the wifi adapter's device driver; it tried to fix it but failed. So I manually updated the device driver in the Properties dialog; that seemed to actually install a new driver (based on how long it took) but it didn't work.
I wonder if there was a recent auto-update for this device that's causing a problem? Or is there some way behind the scenes to hook up this device (who's driver seems to be working) with the windows 10 app (which isn't recognizing it)?
Windows 10 Home 64-bit, upgraded from Windows 7 about 3 months ago Samsung Laptop
The settings window will not open when I click on the icon either in start-up, apps or "This PC" what's the problem is it an installation fault or something I'm not doing correctly? I can access device manager etc. and all the other Icons I've so far tried.
when i use my laptop at home, it can connect to my wifi without any problems.
when i get to work, it refuses to connect to our wifi network. i have the correct password and user name. the wifi is turned on. i restarted the computer and that didnt work. I've tried everything i can think of, including the trouble shoot guide.
i have tried connecting to my school's apartment however it always goes to no connections are available and then airplane mode and shows connections are available. the Wi-Fi connects just fine in all other areas of the school byt not in my apartment. The apartment is located inside the school and there are a couple of access points. I can connect to my friends Wii-U just fine but not my laptop? And when I troubleshoot, it says "Problem with router or access point.
I have a HP computer with built in WiFi access running Windows 10. All of a sudden, I have no option to connect to WiFi, but only have an option to connect with Ethernet. The WiFi options disappeared and I can't find a way to connect without using Ethernet.
Since I updated to windows 10 I cannot get my laptop to connect to the wireless network. The network shows up as available but when I hit connect it says "cannot connect to this network". When I run the troubleshooter it give me the error 'problems with wireless adapter or access point - not fixed'. I have restarted the computer and the router and made sure the drivers are up to date.
I purchased a new computer running Windows 10 (build 10240) today and have set up the windows. However, it will not allow me to connect to my WiFi. When I use the network option in the task bar, no wifi networks are shown and it says that there are no connections available. When I access the network settings, where the different sections are listed on the left-hand side, WiFi is not an available option.
Updating drivers Deleting drivers and then allowing the computer to reinstall A few different command prompt methods such as resetting the TCP stack, as well as trying some that were for people who upgraded from windows 7/8.
I have a PC out in my building and it runs off wifi, sometimes my modem shuts down and reboots but it will take like 5-10 minutes unless I go all the way back to the house and power cycle it. The problem is my windows 10 is set to auto connect to it but never does unless I click the wifi drop down list then it will reconnect, any application that tries to reconnect to a specific wifi more aggressively than windows 10 it gets annoying because if I need to use the pc I cant just look across the room to see if my modem is back.
Changed my wifi name and password. After that I`m unable to type the password. After clicking connect it loads for a while showing "checking network requirements" and it ends with "cant connect to this network". Password box does not even show up!
The computer is at my dad's so I am relaying what he told me. It is a new Cell laptop, a quad i7 CPU with 10 Home ed.
He has a problem: everything that uses WIFI, that is Explorer, Skype, Firefox has long freezes. The connect is practically intermittent. None of his other devices (another Dell quad i5 laptop, an old Core duo Dell laptop not his Galaxy tablet, or his internet TV) have the problem. It is one network which is from his cable company wifi router.
Brought a new Dell laptop and came with windows 10 and i can't get it to connect to wifi. It worked perfectly at my mums, but at home it says wifi password incorrect when its not. I have updated drivers, disabled and enabled the wireless adapter. In command prompt i type ipconfig/renew it says no operation can be performed.
Today, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
DHCP server did not respond DHCP server did not issue an IP addressStored password incorrect; enter new password: _________ WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?