Black Screen On Startup
Dec 15, 2015
I have acer aspire 5740 laplop, core i3 ..... A problem occured extending c windows drive as described below. It have 3 local drives
c - 20gbboot primary drive
d - 90 gb system , primary drive
e - 50 gb logical
Some unallocated space, I was extending c ,by deleting drive d ,at the deleting drive it, gives warning, that if you delete drive d , may your system not get start, i deleted, sudden restarting windows, displaying operating system not found, i tried to install new windows, no booting, after 2 trial, it showing black screen , i have tried some soln as per knowledge ram reset, ms dos boot usb drive. but nothing happened, laptop get normal heat, felt like hardrive boot.
View 1 Replies
Similar Messages:
Aug 11, 2015
On Friday, I updated my HP Envy 20 to Windows 10. Once the update was finished my computer started up fine, however, my antivirus software (AVG) said there was an update and I needed to restart. I did so and after the restart and HP logo screen I had a black, but luminescent screen. After a maybe ten minutes of the screen staying like this, I held the power button down to turn the computer off and then restarted it with no problems. I turned it off Friday night normally and it ran normally all day Saturday. Sunday when I turned the computer on the power light came on and I could hear the fans turn on, but the screen remained black. Just black, not even a luminescent black like when I did the antivirus restart. I tried a hard restart like before but nothing changed. I left the computer on like that for around an hour and nothing changed. Figuring it was maybe a heat issue, I opened up the case and dusted the fan and the heat sink but the problem remains. I posted this problem on the HP support board a few days ago and have heard nothing.
View 4 Replies
Aug 14, 2015
I recently tried to reset Windows 10, but it wouldn't let me. So I started up my pc after and now it's just a black screen. Before all this I was trying to fix my nvidia drivers, and someone recommended me to reset Windows and now Windows won't even start.
View 1 Replies
Jul 31, 2015
I just installed Windows 10, but every time I start up the computer, it will show a black screen before getting to the login screen and then the computer will restart by itself after about 5 seconds.
It does this over and over again.
Some things I've tried:
- I have multiple monitors, so I tried disabling the other in BIOS. Didn't work.
- I tried booting from the integrated GPU rather than my NVidia GPU. Didn't work.
- I unplugged my second monitor. Didn't work.
- I updated my NVidia driver through safe mode. Didn't work.
View 4 Replies
Feb 10, 2016
When I am accessing taskbar and startup and open my computer top and sides its showing as black .
Attached the images for reference ...
View 1 Replies
Aug 2, 2015
Today I upgraded my Win 7 PC to Win 10. Everything was fine 'till the installation finished and came up with my desktop. it loaded normally for a few moments then a black screen appeared with no taskbar nor the icons only cursor. I can access the Task manger and I tried terminating explorer.exe and restarting it but nothing changes.
View 1 Replies
Jan 3, 2016
Running Win 10 on a HP Envy and upon startup everything normal, then icons appear on desktop, then a 5 inch black square in upper right of screen and this hangs for about thirty seconds then disappears and everything is fine. This does not occur on restart. At the top of black box is the following C:programdata242466sysmon.exe. How do I get rid of this delay...
View 7 Replies
Aug 12, 2015
My Windows 10 PC seems to be working OK but I notice that between the Windows 10 splash screen and the user sign on page there's a period of time when the screen simply goes black. The system does get to the sign on page but black screens freak me out a bit...
Also when I log off I'm seeing the same thing. With Windows 10 when I shut down there's a brief period when the screen is simply black and I'm now having to rely on the sound of my machine turning off vs. the visual queues that I had under Windows 7.
View 6 Replies
Aug 27, 2015
I upgraded from windows ultimate to windows 10. my computer boots through everything and finally brings up my old windows 7 desktop screen and then everything goes black, but mouse shows up on black screen. Is this a driver problem with windows 10? However, before the black screen appears the new start button and screen appears as the windows 10
View 1 Replies
Jan 18, 2016
I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
View 2 Replies
Oct 10, 2015
I have a Lenovo Thinkpad Edge with an Intel I5 processor, 64 bit with no hardware upgrades (stock). I had accidentally stepped on the screen (fell off my lap and then crunch) which was mangled beyond repair, so I have been using it similar to a tower, with a VGA and/or HDMI connected monitor (my HDMI cable went bad, I picked up a new cable but hadn't hooked it up to the second monitor. I started my free upgrade from Windows 7 Home Premium to 10 last night. I woke up to the black screen/mouse pointer issue which is what brought me to this thread. I tried the recommended fix:
1. Hit ctrl, type in password and enter
2. Win Key + P + Down Arrow. (Win Key + P only seems to do the same thing)
This brought up options to
1. Disconnect projector (Tried this and lost connection to the VGA even after reboot)
2. Duplicate (Screen is still black with mouse cursor, but I saw a little bit of red and blue pixels at the bottom where the task bar should be until I disconnected and re-connected the VGA, then it was back to black screen and cursor)
3. Extend (still black screen and cursor)
4. Connect Projector (still black screen and cursor)
I'm not sure what to do. I must have some OS installed, because I am able to also perform these operations from my USB Keyboard/Mouse. I'm just not sure how to get Windows back on my VGA connection (I haven't tried HDMI because I did not have it connected when I ran the update.) I thought Duplicate displays would do the trick, but apparently not. For as beat up as the laptop is on the outside, the hardware performs fine. I also have a 2nd laptop (work laptop, also a Lenovo W541) that I can use if any solution involves downloading something bootable.
View 1 Replies
Jan 13, 2016
When I boot up my computer (to windows 10). It will do the Asus splash screen then instead of going straight to windows if does this black screen with the kinda terminal thing (with no writing/text) then goes on to windows. Does this affect my computer?
View 1 Replies
Jan 2, 2016
win10 after showing logo black screen take 2 to 3 mintus to show welcome screen. amd radeon dual graphic card 7400+6310 driver amd site shows it a latest updated driver ...
View 2 Replies
Jul 31, 2015
Okay so I updated from windows 7 to windows 10 i have these black bars around my screen instead of a full screen so I tried changing the resolution because it was set to 800x600 so I change it to 1920x1080.
View 1 Replies
Aug 18, 2015
Is there a way to disable the on screen keyboard on startup?
I don't need it on my desktops or my Surface pro...
View 1 Replies
Jan 15, 2016
I'm having a weird issue since i installed windows 10, After installing, drivers, apps, etc., suddenly after using the PC for a few days, after startup apps finish loading and everything, when i try to open any application (browser, explorer, something with uac prompt, anything..) The screen flashes and turns off for a second and then everything come back to normal, This is my 2nd fresh installation for windows 10, I thought there could be something wrong with the drivers, i double checked them, I even replaced all of the apps that i used to have! , spent lots of time to look for alternatives (Avira instead of Kaspersky, 7zip instead of WinRAR, etc.),
View 9 Replies
Jan 8, 2016
Today I turned on my PC and the login screen came up, logged in and then black screen with a cursor after a while. CTRL-ALT-DEL doesn't work.
Model: Acer Aspire Switch 11 - SW5-111
View 10 Replies
Dec 7, 2015
When running windows 7, for the first few seconds upon booting my laptop, it would display a startup message,
"Press ESC for boot selection, F2 for setup, etc......."
Now, nothing. I cannot choose to enter setup, BIOS, get to ESC for a boot selection screen in case I might want to boot from a flash drive or a floppy just once. How to get it back either.
View 2 Replies
Sep 15, 2015
Basically a staticy flashing white screen spams on my first startup if i power down pc it works fine the 2nd time.
View 1 Replies
Oct 7, 2015
I've seen the regular dashes on startup, but now, a dash comes up on the screen, and doesn't move. It just stays stuck.
View 1 Replies
Aug 1, 2015
The black screen occurs before login screen. It happens randomly. I have to move the mouse (haven't tried pressing keyboard) and it will show the login screen and windows will continue normally. On my device driver it shows only 1 display adapter that is NVIDIA GTX 970. My motherboard is H87-PLUS and its specs shows that it does have an Integrated Graphics Processor.
Tried installing Intel Graphics Driver but just shows 'This computer does not meet the minimum requirements for installing this software.' Tried disabling the lock screen too but its not working. Tried putting PCI-E as the default graphics in BIOS but its not working either. how could I prevent the black screen from showing up again?
View 4 Replies
Sep 29, 2015
I've been using Windows 10 for few weeks now and it's been really good.
8GB Ram
1 TB Hard Disc
Asus Motherboard
i5 processor
Used the PC as I would normally do and shut it down last night. Recently installed the latest update for Win 10 as I recall. Otherwise no new changes or installation to the system.
So now when I switched it on its showing Automatic Startup Repair and it diagnose the PC but fails every time and shows a blue screen of startup repair where I can:-
- reset PC (reinstall but this fails at 36%)
- system restore or image restore ( but can't use either)
- startup repair (doesn't work either)
- command prompt (tried sfc/scannow and they won't allow me to do so unless I restart but keeps getting same error.
Tried unplugging the hard disc etc but same old loop again.
View 1 Replies
Mar 13, 2016
On startup screen: no boot device available
View 1 Replies
Jan 12, 2016
I built a computer a few months ago using:
A Gigabyte Z97X Gaming G1 Motherboard
An Intel i7 4790K CPU
16 GB DDR4 Patriot Memory sticks
Samsung EVO 240GB SSD
Nvidia 256 GB Graphics card
Corsair CX750 Power supply
I immediately bought Windows 10 for it, and for the most part the computer worked fine the last few months. Every once in a while I would get a "Driver Stopped Working but has Recovered" that messed up the Windows control bar and required a restart to fix, but that stopped happening eventually with updates. I still got BSoD's from time to time, including "faulty hardware corrupted page."
Today I got a BSoD when I was logging in called "DPC Watchdog Violation," which I had seen before I think so I figured it would just restart and be fine. However, now I cannot restart the computer, because after the Gigabyte motherboard logo, all I get is a blue screen that flashes on and off quickly. It is just a blue screen, sometimes with a dot in the middle. No matter what I cannot get past this infinite flashing screen, even in safe mode. Commands from the keyboard do nothing once I reach this screen although I can the mouse around. I can enter the special Windows control menu before getting to the flashing blue screen, but nothing has worked from there
Things I've tried:
-Disabling restart after BSoD -- no effect
-Restoring system image -- error, then no effect
-Resetting Windows -- no effect (although I've lost all my applications now)
-Removing my graphics card and plugging my monitor directly into the motherboard -- no effect
-Updating BIOS -- no effect
Currently trying to figure out something I can do in the registry. My last option is completely redownloading Windows 10 without saving files, but I'm not confident that will work given everything else I've tried.
View 3 Replies
Jan 5, 2016
My wife's account is no longer on the startup screen of my computer. I have delted her account & reset it multiple times and deleted from the registry as well. Every time it does not come back BUT when I add it back in as a user it says she can sign it but again, its not on the startup screen. When I reset her account the registry does not have her account back in either. I have tried both family user & other user but never shows up on the startup screen ????????
View 1 Replies
Sep 6, 2015
I have a old windows 7 safe mode boot screen that migrated over to windows 10. I works on windows 10 but I don't need it any more so I want to get rid of it. I just don't want to mess up in removing it... I'm using this tutorial... Can't get rid of the dual-boot option on start-up ?
View 6 Replies
