Keeps Locking Up / Everything Works Fine In Safe Mode

Mar 2, 2016

I've been working on my new computer. I really enjoyed picking out the parts and putting it together, but I'm not enjoying the enormous amount of troubleshooting I'm having to do.I installed Windows 10 on my PC. It froze on set-up, so I reinstalled it. I was then able to use it for a short amount of time and then it froze again. I decided to totally format the drive and reinstall it yet again, and after several attempts (it froze during the set up process several times) I was able to get it installed. Yet, it still freezes.

Normally Windows 10 would freeze in the first few minutes of use, but when I boot Windows 10 through safe mode, it doesn't seem to freeze. My guess is that some kind of software issue is causing this (drivers?) - but I don't know.(Let me clarify that I am able to boot into and use the BIOS just fine. I don't think it's a hardware issue, but I could be wrong.) Is there something that I could do to prevent this from happening? I don't have my drivers installed yet. I also noticed a few errors in the device manger. I'll list them below:

Device Manager > Other Devices

*Base System Device
*PCI DATA Aquisition and Signical Processing Controller
*PCI DATA Aquisition and Signical Processing Controller
*PCI Memory Controller
*PCI Simple Communications Controller
*SM Bus Controller
*Unknown device

They have a yellow triangle next to them. Could my freezing problem be related to this?

View 1 Replies


Similar Messages:


Computer Runs Fine In Safe Mode - Locking Up Randomly

Nov 5, 2015

My computer has been having a problem with locking up randomly. Hard reset is the only way to recover. I ran stress test on CPU, GPU, memory checker, Sea gate tools was never able to recreate the problem or find any issues with any hardware. I also swapped out video cards and still had the same issue. I also monitored temperatures and never had it get hot. But if i reboot into safe mode with networking windows never locks up.  
 
Computer specs
 
windows 10-upgraded from 8.1
i7-4820k
8gb ram
mobo alienware aurora-r4
Radeon r9 200 series

View 3 Replies

Fan At Full Speed Since Upgrade - Works Fine In Diagnostic Mode

Aug 17, 2015

It works fine in diagnostic mode but full speed in regular windows

View 4 Replies

PC Works Fine But Can't Access BIOS

Sep 3, 2015

I'm not sure if this issue has to do with Windows 10, but I figured it may be worth looking into.

View 1 Replies

PC Crashes After 5 Minutes Of Use But Works Fine After Reboot

Dec 30, 2015

about a month ago I built a new pc with windows 10 home 64 bit but about 2 weeks ago my computer had this issue where it blue-screens after 5 minutes of use, reboots and works perfectly after that. The most common error message that i get when it goes into blue-screen is MEMORY_MANAGEMENT. Also about 3 weeks ago i was installing an internet card, i plugged in the internet card and the computer turned on. The card didn't click into place so i pulled it out(while the computer was on, i know very stupid) but while i was doing that it touched the GPU and caused a spark. I don't know whether i have incorrect drivers or if any of the components were damaged in the spark.

View 1 Replies

Blue Screen But Works Perfectly Fine After Reboot

Feb 3, 2016

Over the course of about a month and a half I've been getting these BSODs that state driver irql not less or equal (netio.sys) and also sometimes page fault in non paged area. the weird thing is that after 5 mins the system crashes however after I reboot the system works perfectly fine. I've been hearing a lot of reports online that the crashing has to do with faulty drivers, and i noticed that my wireless adapter (Asus pce ac68) was not working properly according to device manager I new it was faulty drivers so I took it into my local computer shop and the next day they had it fixed. However the problem has not been fixed. I still get the BSODs and apparently antivirus software is partly to blame. could Norton 360 (the antivirus software that i use) be responsible for all these crashes?

View 1 Replies

Network Icon In Tray Has Yellow Triangle But Net Works Fine

Aug 8, 2015

Last night I bit the bullet again & upgraded to windows 10 & then did a clean install. I have noticed that the network icon in the system tray shows a yellow triangle & says no access but I can surf fine with chrome & use qbitorrent etc.

The only way I can get rid of the yellow triangle is to disable the network adapter & then re enable it.

Not using any third party firewall as private fireall doesn't support windows 10.

View 5 Replies

Apps :: Cortana Won't Work On New Computer - Works Fine On Older One

Dec 25, 2015

A few days ago, I upgraded my Windows 7 laptop to Windows 10 and took Cortana for a bit of a test drive. It wasn't great but it might be useful on some occasions.

Today, I bought a brand new laptop which installed Windows 10 when I powered it on. After the installation, I was checking things out a bit and wanted to verify that Cortana was working on the new laptop. Cortana promptly told me it was not available in this region!

This makes no sense to me. I was in Southern Ontario, Canada, both times (although in different cities within the area). I can't believe that Cortana would work in London Ontario but NOT in Kitchener Ontario, which is only an hour east of London.

how I can coax Cortana to work on the new laptop?

View 1 Replies

Error 0x80070006 Installing Apps To SD - Works Fine When Changed C Drive?

Nov 29, 2015

I have an HP Stream 7 that only has 32 GB of space. I put in an SD card and changed the default location in "Storage" to install all new apps to the SD card. Whenever I try to install an app now, I get an error and will not install. When I changed it back to install on C, it downloads and works fine. Is there any work arounds? I saw that someone mentioned they installed the apps to C, and then moved them to the SD card.

View 1 Replies

Networking :: How To Set Shares Using MS Account - Works Fine When LOCAL Account

Jul 2, 2015

Using a LOCAL account I have no problem with Shares -- how do I set these now using an Ms account.

Samba just times out trying to access Windows machine where I'm logged on with an Ms account. Also I can't access other Windows machines from the Ms account. The other Windows machines can't access the Windows machine where I'm logged on with an Ms account.

All these problems DISAPPEAR when using a LOCAL account.

I think my future strategy will be just keep a MINIMAL Windows VM with an Ms account to GET the insider builds and then revert back to Local accounts.

View 9 Replies

Can't Get Out Of Safe Mode

Aug 20, 2015

Due to there not being an F8 boot command screen any more I had to go into msconfig to change how the computer starts up.. which is now set to safe mode. So I'm in safe mode (on the other computer).. the problem is I cannot figure out how to reset it to start up in normal mode. The 'search windows' box at the bottom will not allow any text to be entered.. unless I can get to msconfig by looking for it in safe mode.. I'm stuck in safe mode. How to get to msconfig in safe mode without typing it in? again the msconfig was changed to have the computer start up in safe mode.. it's now doing it every time.. even after a system restore to 4 days ago.

View 2 Replies

Can't Get Out Of The Safe Mode

Aug 25, 2015

I put my PC in safe mode but when I try to get out I can't I press the windows key and the R and then put msconfig. A window opens but it closes right after.

View 6 Replies

How To Run In Safe Mode

Aug 2, 2015

I have a MSI board and cant seem to find how to run windows 10 in safe mode

View 1 Replies

Boot In Safe Mode

Dec 1, 2015

I knew better but with the constant nagging for me to update...I accepted the update. This is where the problems started. My HP dv7 took the update and now only shows a sun burst and blue like screen...mouse works but will not do anything else...tried to boot in safe mode but nothing doing there either...... how to just get back to my win 7 home pre.

View 2 Replies

Flashing - Cannot Get Out Of Safe Mode

Aug 24, 2015

I was having difficulty with flashing and went into safe mode to try to figure out which program was causing it but now whenever I reboot I am still in Safe Mode.

View 8 Replies

How To Enter In Safe Mode With F8 Key

Sep 5, 2015

how it did not work on windows 10 using f8 key..I like knowing if I need to get into safe mode on my pc the f8 key will work... So I started checking the web and found how to make windows 10 go into safe mode with f8 key...The information I found is for windows 8 but I checked it out on my windows 10 pc and it works just fine... How to enable the F8 key to start Safe Mode in Windows 8.Admin...If this is information you all know about just delete this post...

View 6 Replies

How To Get Into Safe Mode - Tool Bar

Dec 15, 2015

I'm using Windows 8.1 and know how to get into safe mode on that operating system.

However, my friend has Windows 10 Home Edition and I've never had exposure to it in the past.

How does one get into Safe Mode?

Also, how can you get the toolbar back on the page as like Windows 7 and Windows 8.1?

In Windows 8.1 it was very simple and straight forward, but Windows 10, different ball game all together.

View 9 Replies

Get Out Of Safe Mode Without Password

Jan 28, 2016

Needed to boot in safe mode, used msconfig to set the boot mode. Of course I was not aware my pen number login is wothless so now I am stuck in perpetual safe login screen. My outlook password is in a program on the system which I cannot access.

Tried shift restart and tried startup settings and press enter, but this does not do a normal boot, just another safe mode. Where is the option for normal boot!?

View 9 Replies

Disabling Safe Mode?

Feb 23, 2016

I work in an education environment and these kids are very savvy. They have figured out how to put the computer in Safe Mode and make it impossible for me to track them. how to Disable Safe Mode?

View 5 Replies

Safe Mode Error

Apr 2, 2016

I want to boot into safe mode but every time I try it crashes and shows BSOD Bad_Pool_Header. I've tried to boot it manually through system config. It still won't work.

View 1 Replies

Can't Login From Safe Mode

Nov 23, 2015

My laptop was windows 7 and I have upgraded to windows 10.  Over the past few weeks i've seen that some updates have failed, and I was going to try the product on this site , windows all in one, to try and find out the problem.  so i followed the instructions for powering off, unplugging and removing battery to drain electricity, and then rebooted to "safe" level...and then.....i can't login from safe mode, it says password is incorrect, and i am unable to get OUT of safe level to sign in the regular way.

View 4 Replies

PIN Changed In Safe Mode?

Oct 28, 2015

So, to log into your computer you have now to enter a PIN instead of a password, right? Well, that PIN is changed (or something similar) because I can't log in with the normal one.

View 7 Replies

How To Get Computer To Revert From Safe Mode

Sep 27, 2015

Long story short, W10 doesn't support my built in Intel video chip and there is no driver and W10 wont let me load Windows Basic Video driver so I need to go back to W7. I can only get into Safe Mode so I don't see how to do the reversal. Windows.old exists. How do I get the computer to revert from Safe Mode?

View 8 Replies

How To Stop Booting Into Safe Mode

Aug 28, 2015

I have just upgraded my PC from Windows 8 to Windows 10.

My antivirus software needed to restart and boot in to Safe Mode.

But, for years I have used the 4 digit pin login from Win 8,but I cannot remember the normal password.

Safe Mode ony allows login via the normal password and not the pin, so I nol longer have accessto my PC.

How can I get the PC to start in normal mode.

I do not have any install or recovery media.

View 3 Replies

Safe Mode Not Adding Network

Nov 1, 2015

Through msconfig I added safe boot with networking, however when I restart with F8 networking does not boot up. Took a while to even find how to get that far and then it didn't work right.

View 3 Replies

Performance :: Can't Boot To Safe Mode

Feb 10, 2016

I can boot up my PC but then anything I do results in non responding screens so cant get into safe mode from there.

Anything involving restart caudse hanging on 'restarting'

Is there another way?

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved