Msconfig / System Configuration Is Showing Windows 8.1 Under Boot
Aug 13, 2015I can't make it Windows 10....
View 6 Replies
Similar Messages:
MSConfig - System Configuration Changes Freezes Computer
Mar 31, 2016I have the very latest Build of Windows 10 Pro, but recently I have experienced problems with my PC’s general performance – I therefore decided to Run msconfig to then uncheck some 3rd party programs under services within the System Configuration Hiding All window services first.
What is happening is that when I disable all and then go about checking the 3rd party progs one by one, the 1st attempt to tick one of the programmes the system config freezes. I have to then reboot the PC but the same thing happens if I try and attempt to do this again.
if I try the same thing but booting within Safe mode the PC does not freeze – so my question is .. can this action only be carried out in Safe mode ??
I have searched the internet for a few days now but cannot come up with an answer to this .. if you are supposed to be able to do this under normal windows start up then I have a big problem with my OS but if this is a procedure that can only be carried out within safe mode then all is well.
Attached Files : Pic.jpg 61.71KB
Installation :: Wrong Drive Letter In Msconfig / Boot In Dual Boot System
Jan 27, 2016In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
Installation :: Gigabyte Brix - Windows Could Not Update Computer Boot Configuration
Sep 16, 2015I've just bought a little Gigabyte Brix 1900, but when installing Windows 10 I got an error saying:
"Windows could not update the computer's boot configuration. Installation cannot proceed"
It turns out that the unit needs a BIOS update to the latest version before Windows 10 can be installed. I just wanted to post this information here, as I imagine this will be a frustration to many others!
With a few workarounds, you can update the BIOS from within the Repair > Tools > Command Prompt options. Just be sure to download the DOS BIOS zip from the gigabyte website (which won't run properly, but contains the ROM), plus the Windows BIOS tool which you can then run from the command prompt.
MSConfig Boot - Can Only Boot In Safe Mode
Sep 29, 2015Over the weekend I upgraded from 8.1 (which was working perfectly) to Windows 10. Unfortunately, it had a few problems - namely that it would 'hang' at random intervals (5 minutes to 5+ hours). In an attempt to isolate what was causing this, I was advised to use Msconfig to do a clean boot.
Unfortunately, in the process, I have rendered my PC near-useless, as I accidentally ticked the box "Use original boot configuration" under Selective startup. (I know, I know. I'm so cross with myself.) As a result, I am now presented with what looks like my old boot screen - offering Windows 7, Windows 8, Windows 8.1, Windows 8.1 with Media Center, but no Windows 10.
(I originally had Windows 7 on what is now my D: drive. I ended up dual booting with this and Windows 8, but I'm pretty sure the version of 8.1 - which I've just upgraded to Windows 10 - was a clean install. It's certainly on my SSD (C: drive).)
Anyway, by using Change defaults... - Choose other options - Troubleshoot - Start-up Settings, I was at least able to bring up the screen that gives you Safe Mode as an option. This allowed me to boot into Windows 10 Safe Mode.
I went back to MSConfig and eventually found a way to deselect 'Use original boot configuration' (it was greyed out for a while). However, on restart, it still showed me the old options, i.e. no sign of Windows 10 Pro. It seems the only way I can currently boot into Windows 10 is via Safe Mode.
I've tried various things today - I tried to use Bcdedit to force it to look at the C: not D: drive, and I've tried booting with a Windows 10 DVD and using the Repair option (but partway into the repair process it starts thinking it's a Windows 8 machine again...).
I've just 'spoken' to a chap at Microsoft and he is adamant that there's no alternative (because there's no Refresh option under Settings - Update & Security - Recovery) but to reinstall Windows 8.0, and then upgrade to 8.1 and then Windows 10. As you can imagine, I really, really don't want to go down that route. But, at the moment, I can't even roll back to 8.1.
Given that I can still - sort of - boot into Windows 10, the correct MBR/BCD/whatever must still be on my C: drive somewhere, surely?
Recovery Drive Boot Fails With Missing Boot Configuration Data
Feb 2, 2016When I try to boot from a recovery flash drive, it fails with: EFIMicrosoftBootBCD error status: 0xc000000f and message: The Boot Configuration Data for your PC is missing or contains errors.
The recovery flash drive was created on a Lenovo ideapad originally with Windows 8, now upgraded to Windows 10, latest upgrades applied. Checked the box for copying system files. Target drive was a 16GB DataTraveler flash drive formatted as FAT32. Creation ran to completion with no errors. When booting normally, Windows 10 runs fine with no issues. I tried re-creating the recovery drive with the same results.
I created a repair disk and tried to use bootrec to fix the issue, but I suspect it did nothing or fixed the c: drive. I ran boot rec while in the root directory on the flash drive.
Boot Into Safe Mode Via Msconfig
Mar 23, 2016I tried to boot into safe mode via msconfig then after restarts it showed BAD_POOL_HEADER and PAGE_FAULT_IN_NONPAGED_AREA. I've tried chkdsk and system recover. I don't want to Reset my laptop. S
View 1 RepliesPin Desktop Shortcut Of Msconfig System App As Tile
Feb 10, 2016I tried to pin a desktop shortcut of msconfig system app as tile to the start metro screen but refuses to pin. It doesn't even exists 'Pin to Start screen' selection when i right click the shortcut. What should i do? I even copied the shortcut to the 'All Apps' folder and appeared on the left to the up and down app list but i can't drag to start screen as tile.
View 9 RepliesNot Wanted Tile Configuration Showing Full Time In Desktop
Jan 4, 2016Just got a brand new dell computer from store with windows 10 factory installed a week ago. Today the computer became non responsive; I had to reboot it. Once rebooted, the <windows>+<D> no longer works, the display has changed similar to windows 8 (?!?!) and I can't get rid of the tiles in the desktop. What has happened? I am very disappointed with windows. I miss my old computer. What a piece of junk windows 10 is.
View 4 RepliesOpens Folder At Boot - Msconfig Stuck At Selective Startup
Oct 5, 20151. If I try to select normal startup in msconfig.exe, it doesn't stick; always reverts to selective startup.
2. When I boot to the Windows 10 desktop, it always opens a Windows Explorer window at /windows/system/ which shows only a Speech folder in the right panel.
3. Checking my BootManager using BCDEdit, I see this but I don't understand what the entries mean or whether any of them are connected to the problems 1 and/or 2:
Code:
C:Windowssystem32>bcdeditWindows Boot Manager--------------------identifier {bootmgr}
device partition=C:description Windows Boot Managerlocale en-USinherit {globalsettings}
default {current}resumeobject {657a150b-658d-11e5-99b6-8e17c296bef1}
displayorder {current}toolsdisplayorder {memdiag}timeout 30Windows Boot Loader
[Code]....
Dual Boot Configuration
Jul 18, 2015On the bottom of windows 7 there is a icon to upgrade to windows 10. However, is there/will there be a way to upgrade to windows 10 and keep windows 7 in a dual boot configuration.
View 1 RepliesWhy Does System Configuration Stick With Selective Startup
Aug 8, 2015My Windows 10 home-64b works flawlessly, but I've realized that the system configuration stubbornly continues to initiate under "Selective Startup" instead of "Normal Startup" which makes me wonder which "services" cannot be loaded. I've tried to change it but it continues to be the same "selective Startup". This makes me uncomfortable cause possible future problems.
View 8 RepliesInstallation :: Dual Booting Set Up In System Configuration
Nov 5, 2015Just getting to grips with W10 and noticed that dual booting can be set up in System Configuration-boot. This was the case in XP, I think or was a previous version. Bit late now as I have easybcd on W7 drive. Before you ask I have never had a successful install where W10 finds W7 and displays that fancy box on start up.
View 8 RepliesGetting Windows Boot Menu Screen Every Time System Is Loading
Oct 20, 2015Recently I've installed Windows 10 on a Dell Inspiron 17. It had had a preinstalled Ubuntu. When installing Windows, I deleted the Ubuntu partition, leaving only the one for system recovery and the one called DIAGS, I think.
Now everytime the system is loading, for a split second I get the Windows Boot Menu screen that's cut from the top. See : [URL] ....
After that, the system loads just fine. What is it and how do I get rid of it?
Windows 7 On SSD And Files On HDD - Upgrading With This Configuration
Feb 17, 2016As the title states I have an SSD and HDD setup, now I have set the Windows Documents, Pictures and Music folders ect and the app data on the HDD as you would.
And some programs are on the SSD and others on the HHD.
Will upgrading to windows 10 mess with this or will it just upgrade without putting random bits of it on my HDD.
DVD / CD Drive Error 19 - Windows Cannot Start Hardware Device / Configuration Info (in Registry) Is Incomplete
Nov 20, 2015Recently, sometime after getting the free upgrade from Windows 8.1 to Windows 10, I noticed my DVD/CD drive was no longer being acknowledged by my laptop.
I went into Device Manager and found "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)".
I uninstalled the device(TSSTcorp CDDVDW SU-208BB,) and restarted. Nothing changed, so I tried going into registry and deleting UpperFilters and LowerFilters, and again restarted. No change. When I start my computer in safe mode, it works fine.
I also tried buying an external dvd/cd drive, plugged it in and installed drivers. It came out with the exact same error.
My laptop is a Toshiba Satellite S55-A5236.
(I even heard that uninstalling iTunes sometimes works, tried it, didn't work.)
Drivers/Hardware :: 64-bit System Showing 32-bit?
Nov 17, 2015Why is my laptop showing System 32-bit, when its clearly x64-bit machine.
View 3 RepliesShowing Only 3.9gb Usable While Have 8gig Of RAM On System
Aug 5, 2015Windows 10 is showing only 3.9gb usable while i have 8gig of ram installed on my system.
View 1 RepliesNo Boot Manager On Dual Boot System
Oct 9, 2015Today I installed Windows 10 on my machine (ASUS N55SF laptop) for the first time on a separate hard drive. Now I have Windows 7 on my main hard drive and Windows 10 on my new drive (the latter being an SSD one). After installing Windows 10, I got a new boot option in my BIOS called "Windows Boot Manager" which is set as default, but it runs Windows 10 directly, I can't see any boot manager (I can assure "Windows Boot Manager" behaves this way because my BIOS lets me override the boot option, so that I can directly run any boot option, and this is probably the only way I can run Windows 7 currently).
If I go to Start → Advanced system settings → Startup and Recovery → Settings, I only see Windows 10 in the "Default operating system" drop-down menu, while I only see Windows 7 if I do this while on Windows 7. It's like the two OSs are not completely aware of each other.
No Boot Device Available Showing On Startup Screen
Mar 13, 2016On startup screen: no boot device available
View 1 RepliesBoot Up Stop With A Black Screen Showing ACER And Nothing Happens
Feb 26, 2016Installed win 10 with no problems and it has been running successfully for a good while. Recently I have had some booting problems, not all the time but every so often the boot sits there with a black screen showing ACER and nothing happens. If you sit long enough it will boot with no other problems. I tried looking at the boot section and switched it to normal as it was on something else which I cannot remember.
View 5 RepliesMsconfig Won't Save?
Aug 23, 2015everytime i change the settings in there it wont let me save it even when i mark the make all the boot settings permanent. im using windows 10 i wanna change the maximum memory to 8192 which now is 0 and cant hide all microsoft services .
View 1 RepliesMSCONFIG Won't Save Changes
Dec 28, 2015I was doing a selective startup from msconfig to test something, and restarted. After that I tried changing back to normal startup and it wouldn't work. It is not saving any of my settings either.
View 1 RepliesSSD And HDD Not Showing Up Anywhere In Windows
Apr 4, 2016I just purchased a Samsung 850 Evo SSD, and after connecting it up, my new SSD as well as my older WD Green HDD are not showing up anywhere in Windows. I can't seem to find them in Device Manager or Disk Management. They both do, however, pop up in the BIOS. The motherboard is an Asrock b85m pro4 if that matters.. I'm not really sure how to troubleshoot this issue. I have an 840 Evo as my boot driving which is starting Windows up just fine.
View 1 RepliesMSConfig In Selective Startup
Sep 26, 2015Yesterday while checking things on here I ran msconfig for the first time. I found that selective startup was checked off. Not something I set so win 10 must have set it when I installed it. Now what reason would this be for?
View 4 RepliesEasy Way To Access Msconfig
Aug 18, 2015Any easy way to access msconfig in windows 10? I got the download. It wants to disable some apps at start up but I haven't a clue as to how without msconfig.
View 4 Replies