So, after about 2 weeks of experiencing Windows 10 I've decided to revert back to Windows 8.1, since I was more experienced at it. So I followed every step to downgrade the system, waited for about a few hours, then I noticed that when Windows restarted, it somehow went to an "automatic repair" loop. I've tried literally everything there was so I can get it running again, but nothing seems to work. But, there was only one option, in which I feel like an idiot to try out.
I went to Command Prompt and typed in diskpart.exe, then enter. I then typed in LIST DISK, then SELECT DISK SYSTEM, and finally CLEAN. Since I thought at the time that CLEAN works like resetting the PC, I rebooted it again, and I came to an error message saying: No boot disk has been detected or the disk has failed.Is, or will there be any other way to start my PC in a condition like this? If I'm missing any other details then feel free to ask.
I have a configuration where win 10 is installed on SSD but the Users folder is on a dynamic disk on HDD and the linking is made by a hard junction link from C: to D. I have removed paging on D as well as protection. Hence, I am able to remove all volumes of the dynamic disk and convert it back to a basic disk and format it.The problem is that I would like to keep all my installed programs (and settings, preferably). I have copied the Users directory to an external disk and copied them back to D after conversion. This seems to lead to a nonfunctional situation where I cannot even add a new user and most programs (even not all windows tools) do not work.What would be the best approach to avoid reinstalling the programs and to keep existing users?
Running windows 10, due to some personal reasons want to change my dynamic disk to a basic disk... But the option for the same is greyed out in Disk Management.
Every time I boot up my pc I get a black screen with 2 lines of text "disk i/o error, replace the disk and then press any key". After I press any key pc boots up fine. Lenovo pc with Windows 10.
I'm making a image for installation of windows 10. I make a USB flash drive with WINPE. and once the device starts into WINPE, it will automatically start to install windows 10 by calling "dism /apply-image". Normally i just shutdown the computer after installation, but now i want to reboot the device and boot into the windows i just installed. But i can't, because if i reboot the device, it will boot into WINPE again and start another turn of installation of windows. How could i temporary boot into my windows 10?
So I have a Toshiba Satellite C855D-S5303 that has had windows tech preview installed on it. But when I tried to boot into it, it said that the windows signature wasn't correct and it would continously going into that window. I then tried to install a newer version of the tech preview and ubuntu, but neither succesed (they were on usb.)
I also tried to install Windows 7 by a disk, but that didn't boot to either. I pressed F12 to boot into the boot order, select to boot into usb or disk and neither worked. I set usb to the first option and it didn't even boot to the usb. It might be the usb's that might not be bootable fully, but on my win7 pc i got all of them to successfully be read as bootable.
I booted into the bios serveral times and set the boot mode to CSM mode and UEFI mode but neither would boot from the usbs or disk. I have the InsydeH20 Setup Utility BIOS on my PC.
I'm planning to download the iso, or whatever file it is from the Microsoft website, and install it using that. (I never got the taskbar notification,.how I can make a dual boot on my second hard drive using that download (another thread I made, I've gotten the hard drive working and want that to be my dual boot, not having two operating systems on one hard drive)
I would like Windows 10 on my second, completely wiped hard drive.Unless I'm able to use my Windows 7 disk to install it on the second hard drive, and use the Windows 10 download to upgrade it on that hard drive in particular?
I want to know whether I can create a Windows 10 USB boot disk from a folder in my PC(NOT an ISO). The folder contains all the necessary setup files for the the installation that were created by the Windows 10 media creation tool.
I upgraded to windows 10 when it came out.. however many months ago it came out.. 3? I was running this "WD Black 3TB Performance Desktop Hard Disk Drive - 7200 RPM SATA 6 Gb/s 64MB Cache 3.5 Inch - WD3003FZEX" (copied directly off amazon) for about a year before that. But soon after upgrading to 10 I've been suffering from huge amounts of disk usage. 100% at just 12mb/s PC takes forever to boot and ages to load/transfer things. I've just lived with it for a while.
Anyway. I was reluctant to start anew on a new HDD. So I bought another of the same model.. asuming it had just pooped out. As it runs pretty hot. Hotter than I'm used to a HDD getting. But this new one runs hot right of the box as well. After cloning my system onto the new one I have the exact same issue. I no longer think its hardware related. Is there any way out of this without starting formatting and starting all over?
I'll mention I ran a fresh install of windows on the new HDD before cloning onto it. Ran fine then. And I dunno if its relevant or not but since this problem began my audio will sometimes cut out for several seconds before popping back on.
Two nights ago, I had a brief power outage at my house. Since then, my Windows 10 preview installation will not boot. It keeps giving a boot disk error. I first tried booting from my Build 10166 disc created from ISO and running the startup repair. I've seen errors using this tool on previous Windows versions, but the computer quickly rebooted, so I thought it was successful without errors. Nope, I still get the boot disk error message.
I booted again with my installation disc and tried running the "Refresh" option. This time, I get a message that the drive containing my Windows installation is locked and that I should unlock it before trying again. How I can unlock the drive? Unless I figure that out, it sounds like I will have to perform a clean installation.of Windows 10, which I don't really want to have to do again.
Migrated OS 8.1 from HDD to SSD . Migration software installed command line in bios "Boot Manager on Disk 1". If I do a format of SSD will bios revert to original without the reference to disk 1. I intend on doing a clean install of Windows 10 retail version in UEFI mode....
I've been having this problem for a long time, I've tried resetting my pc to factory settings, didn't work. I tried windows trouble-shooter, didn't work. When I boot I am greeted with a zoostorm logo for about 50 seconds followed by a black screen for 1 minute, and then a windows screen for about 30 seconds. Booting takes about 2-3 mins and even when I'm finally in, my programs load extremely slow and I can only open chrome after a minute otherwise it lags. Remember I have reset my pc so nothing runs on startup apart from steam.
I have a gtx 970 and the latest drivers for it. Also I get 100% disk usage when performing certain tasks. my cpu,gpu and memory never go to such percentage and if they do its because I'm running a very cpu,gpu or ram intensive game. I have not changed anything in my bios since I got my pc and have never done anything to the disk drive (all I know is my HDD is 3tb and has a speed of around 120mb/s) The only thing I have changed on my pc since I got it was an upgrade to windows 10 from 8.1, gtx 970 from a 750ti and a 750w power supply by corsair.
I do not know if this problem happened when I had windows 8.1 but even if windows 10 is the problem there must be a way to fix it as I despise using windows 8.1 anymore. Another thing to note is that loading times for games take a little longer than my friends and my pc is slow at downloading games, my disk usage when installing games is usually 13mb/s and I get 100% disk usage from using 13mb/s. As you can see by this screen shot steam is downloading fallout 4 and 14mb/s of my disk are being used and everything else barely reaches 1mb/s
How do I reset a PC with windows 10 installed to where it asks for a boot disk on a black screen or something like that? not where I reset it and windows is still installed, I need a reset it to where I can only go in the bios....
I was having long boot time issues with windows 7. It was taking more than 5-6 mins for my pc to become responsive on desktop. Then I upgraded windows 10 today , issue still persisted. After that , I tried clean installing the 10.
I still have issues which are :
1)After Windows logo I have a black screen for a couple of minutes then logon screen comes. ( Last reboot : 1.5 mins )
2)After logon , my formatted pc takes some time to became responsive due the system and svchost processes using hdd %100.
(2mins after logon , usage goes down and pc is responsive)
I checked my HDD and it was fine when using win 7.
My custom-built pc all of a sudden won't boot in to windows. i get the error message "reboot and select proper boot device or insert boot media in selected boot device and press a key", and i have made sure that my hdd is my first boot option. i want to reinstall windows now because that seems like the only way out, but i cant because i have no recovery usb or disc. what can i do to boot to this harddrive, that my bios detects just fine.
I have a folder structure (see below) that is created after upgrade from W7 to W10. In my previous question a day ago it was confirmed that it could be used for creating W10 installation media. So I don't want to repeat how it was created. It was created automatically and it is 3GB in size.
My question: I burned files and folders to DVD using native W10 burn files to disk method. The disk is not bootable. The structure on the root of the disk is exact as in Windows folder on the pic. Did I miss the option for making it bootable? Or it should be bootable just by burning the content to DVD?
Okay, so I am trying to download something from a disk, but it won't let me because I'm not an administrator, except I am. I can't do anything about it because it says I need to try in an admin's password, which i do not know and it doesn't even give me the option to type in anything.
I have had no success in installing Windows 10 as an upgrade to Windows 7 on my newly built system. What I intend to do tomorrow is to install from the OEM disk which I just purchased for $117.14 from A...... I may return the Windows 7 disc ($61) for refund if it is successful. If not the Windows 10 disc goes back for refund and I will keep Windows 7. Yes, they will issue full refund and free return shipping no questions asked. That is an additional $56.14 to acquire Windows 10 (including a disc) but worth it to me I'd cross my fingers but those from my planet only have one digit per limb.
I just installed Win 10. First impression is that I'm not impressed with the new design. I think mobile devices are ruining the internet.How do I get to disk management? Is it similar to Win 7? how do I get to Services and Event Viewer?
For some reason whenever I open Task manager it says that 100% of my Disk is used, this can be even if all the processes add up to like 2mb or if avast! is running and using 50mb. It will say 100% Disk Usage either way.I sent my HDD back to DinoPC.com a few months ago and they said nothing was wrong with it.
I have 2 partitions on my main HDD - one (200gb) for Os and next one (800gb) for files (photos, videos...). I cant transform my disk to GPT, because I have about 500gb files on disk and can't store it somewhere. I have 80gb SSD used as cache, too, but can't install it here, because this disl is showing like just 10gb on disk select step.
I am trying to create a recovery USB drive from which I can install Windows 10 fresh, if needed. Or quickly restore system images in case of a drive issue. There are a couple of things I am not clear about.
Background:
I have an ASUS laptop that came with Windows 8.1, UEFI (upgraded to Windows 10 at the moment). Initially, I created a Windows 8.1 recovery USB and reinstalled Win 8.1 using it. From what I understand, the 100MB EFI partition is normally the first one. On restoration, the following was created
305 MB Win 8.1 system partition 100 MB EFI C drive Manufacturer recovery partition
When it upgraded to Win 10, it ended up with the following partition structure
305 MB Win 8.1 system partition 100 MB EFI C drive 450 MB system partition (I believe this is Win 10 system partition) Manufacturer recovery partition
Questions:
The trouble is, now when I create a Windows 10 recovery USB drive, it really creates just a rescue drive (< 1GB in size) even though the 'copy system files' option is selected. I believe a recovery USB drive needs at least a 16GB drive. Not sure what is happening here?!!!
Also, is there a way to make Win 8.1 recovery create the system partition adjacent to the C drive so it can resize it to 450 MB during the upgrade? Or maybe create a 500MB partition beforehand that Win 8.1 uses during recovery and later is upgraded to Win 10? Can I create the partitions beforehand using GParted Live USB and expect the Windows recovery process to use them?
