I have just upgraded from build 9926 to build 10041 and now I have s major problem with the login screen. It won't respond and no matter what I do with my mouse or keyboard it respond. The clock still changes however which us kinda strange. Here is a pic
View 9 RepliesI started my computer and came back to find a BSOD. It displayed an error code and mentioned something about a driver error. I waited until the loading reached 100%, but it didn't restart on its own so i shut the computer down manually by holding the power button on my case. Then it booted up, but it got stuck on the spinning circle of dots. I have been able to press CTRL+ALT+DEL while at the spinning circle which bring me to the login screen but without the box to enter my pin, however, I am able to access the network, ease of access and power options. I have tried restarting, shutting down, and holding shift while restarting in an effort to boot with safe mode but none have gotten me farther than the spinning circle. Attached are photos of the different screens
View 3 RepliesI have followed several similar threads and their fixes for this problem with no result. After downloading the Win 10 upgrade, my system then said "loading updates". Then it restarted with a blue login screen saying "Welcome Back!" And a box to enter my password. The cursor is blinking in the box, but neither my mouse or keyboard works.
I have hard booted several times since the ctrl+alt+delete does not work. I am also not able to access safe mode as none of the "F" keys work during boot up.
I have tried the following:
1. Unplugged all USB devices except keyboard.
2. Turning off internet at the router.
I have a Dell desktop, and upgraded from Windows 7, with a Netgear router/modem. The only way I can get the system to move is if I power off at the main switch after booting up which goes into bios and disc diagnostics, but I don't know enough about computers to know what to do there!
I have a acer aspire es1 laptop and i upgraded from 8.1 to 10 and when i switch on my computer from cold boot it loads up but when at the login screen it gives the spinning wheel saying hibernating above it but will not go any further.
View 2 RepliesSo I started my pc today and my window search didn't work anymore, just blank no results and everything felt very slow. so i restarted into safe mode without network and now it restarted asking for my windows login which is linked to my email. But i have no network so its not logging in. i have tried f8 when restarting but don't get any options to choose which boot mode you want as you could in windows 7.
I am trying to create usb windows 10 recover/install on my other laptop but its failing.
I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
I reinstalled windows the day before yesterday and since then every time I turn my laptop on after entering my password the screen turns off for like 2 seconds then turns back on. This have never happened to me before. I tried putting my old windows back via Macrium Reflect and I even tried reinstalling it again but neither of those things worked. I have an Acer Aspire V3-572g laptop.
View 9 RepliesI upgraded from Windows 8 to 10 without a hitch an hour ago and kept all of my personal files and apps. I set up my start menu and everything was working fine, but I wanted to change the image on the logon screen (or whatever you call the screen in between the lock screen and the screen where you enter your PIN/info). So I took a risk and downloaded the 3rd party app here:
[URL] and uploaded an image and hit apply. Of course right after doing that I went to lock my PC to see if it worked, and as you can tell... it didn't.
I've tried rebooting and it hasn't worked. It's just very rapidly flashing between a blue screen w/ a loading circle and my lock screen image.
I upgraded to Win 10 on Friday, and since, despite several resetting PC attempts, Win 10 will not load to the login screen. Instead, it is stuck on a loop flashing between the lock screen and a gray loading screen quickly back to the lock screen -- instead of loading to the login screen. This only happens when I attempt to restart or update my PC. If I go to the lock screen because I locked my PC or it fell asleep, I can unlock it. I have also attempted to reset my PC to the previous build, to no avail. I have no restore points.
View 1 RepliesThe black screen occurs before login screen. It happens randomly. I have to move the mouse (haven't tried pressing keyboard) and it will show the login screen and windows will continue normally. On my device driver it shows only 1 display adapter that is NVIDIA GTX 970. My motherboard is H87-PLUS and its specs shows that it does have an Integrated Graphics Processor.
Tried installing Intel Graphics Driver but just shows 'This computer does not meet the minimum requirements for installing this software.' Tried disabling the lock screen too but its not working. Tried putting PCI-E as the default graphics in BIOS but its not working either. how could I prevent the black screen from showing up again?
While logged in the systems goes back to the login screen. I have checked all of the display and screen saver settings. But after a reboot it still happens after just a few minutes.
View 3 RepliesSo.. I screwed up.. I used a small program called something like Windows 10 Login Background Changer (something along those lines) and when I restarted my computer, it never reached the login screen. I can move the mouse and open Magnifier (was pushing random controls), but I don't know how to get past here.
View 7 RepliesI tried to install Windows 10 fresh from a usb but it said my Windows 7 key didn't work and I never got a Windows 10 key so I'm not sure what to do, the upgrade install won't login. I enter password, then proceed but it locks up. if I click anywhere after a minute the screen goes black ave nothing happens.
a: where to get the Windows 10 key so I can do a fresh install
or b: how to fix this login screen
I tried safe mode repair but it said it's unable to repair and I should restart the pc.
How can I get rid of the login requirement when booting into Win 10. It is bad enough that it DEMANDS a login on a home personal PC (If someone is in my house then I have been broken into), BUT MS goes farther and insists it has to be a passwork of a certain strength containing this many characters and so many upper and numeric - there has to be a way to defeat this. I tried leaving the field blank and it will have nothing to do with that.
View 19 RepliesWindows 10 loads and all good, after typing in password all good, programs load, then after 10 seconds black screen with mouse cursor active, if I run a command prompt and type in explorer.exe the desktop comes back for 10 seconds then back to black screen, I run a nviadia 460 GTX, I'm assuming theres some driver issue, have installed latest driver but same result.
View 2 RepliesHow to remove a login screen in windows 10?
View 6 RepliesI just installed Windows 10. The install went fine, but now I am at the login screen, and that is as far as I've gotten. I have the option to click on all of the buttons on the login screen, but as soon as I click one, be it hitting enter after entering my password, or hitting the next button, or clicking "I'm not Eric", it freezes.
I can't click anything, the button I clicked stays the color it looks when you press it. I then continue to click until the loading wheel appears, then the screen gets the white haze like a program isn't responding, and then goes black and reboots. I can click on the clock looking image that gives you some options, and I can click and unclick those, but as soon as I try something else, freezes.
System meets the requirements, have a genuine copy of windows 7 ultimate, downloaded windows 10 from the media launched or whatever it's called that you can bypass the wait time for receiving the update. It was from the window site, so I feel comfortable in believing it isn't a fake or anything.
EDIT: When I turn on the narrator, everytime I make a key stroke it says "Hidden", not sure what the entails
I got updated to Windows 10 from Windows 8.1 yesterday, everything was as it should be, but today I got a new Driver Update from Nvidia for Specially for Windows 10 It installed fine and asked to restart so I did and it restarted like normal until It asks to type my password in after that, I get a Black screen after I type in my password it has the mouse pointer and Ctrl+Alt+Del works I tried to open task manager(to manually run file explorer.exe) but it won't work I have an acer laptop(E5-573G-76NF) and I don't have the Windows disk to access recovery options as windows 8.1 pre-installed so I can't Do a system restore.
View 1 RepliesSo today after updating my Windows 7 laptop to Windows 10 everything was fine I managed to open the Windows 10 desktop and then it said that is has to update the Windows.I left it to update and when I returned I found a blue error screen saying "Windows encountered a problem and needs to restart".And now when I boot the PC it keeps on restarting and can't even reach login screen.The Windows is genuine it was preloaded on the laptop when I bought it and also I don't mind losing my data I just want to fix the laptop.I don't have a disc to use for repair and even don't know how to repair. system thread exception not handled athwbx.sys is the error and I can boot in Safe mode.
View 1 Replieswhen I start up windows 10, type in my password and hit enter, it takes a bit longer to load and but doesnt even load my desktop. I can ctrl+alt+del to get task manager going and open up chrome with that, but it wont load any web pages. I didn't change anything the day before so I dont know whats up. I tried booting into safe mode but it still does the same thing. Luckily I had my old hard drive with 8.1 still installed so I could get on, and everything works fine on it.
View 1 RepliesI'v try to change a LogIn screen whit an managed picture of our company in sted of Enable or Disable LogIn screen.Is there way to change tath "img0.jpg" tath apear onder the accountpicture on login trougth regedit or gpedit or GP on AD, and not using tird party modifying tools like "W10 Logon BG Changer" or else. Just making an 'GoldenImage' for WDS on WS2K12R2
View 1 RepliesI installed windows 10 on my machine last week which went fine with no errors. Since then, I have come into work everyday and found the computer idling at the login screen, flashing and not responding. Just a constant flashing until I turn it off. Because of this I've had to reset windows under the troubleshoot option on start up. Safe mode doesn't work, and back up restore doesn't either. I wanted to add that I don't receive an error code or message.
View 4 Replieswhen i try to auto login it comes up invalid pass/user. all of a sudden a new user has appeared
manage accounts shows only 1 user
netplwiz shows only 1 user
Attachment 41142
all default accounts are disabled
Where has this new user come from and how do i get rid of it so i can have my auto login back
I get to the login screen that says "Hi there, welcome back!", and when I press the "Next" button the login screen takes a long time and I get a loading cursor. If I press anything after that, the computer restarts itself and the problem begins again. Due to this, I can't even access my computer.
View 2 RepliesI just bought this computer a few weeks ago and this problem has been persistent since I've gotten it. sometimes when I login, the screen is black or partially black, the rectangle for my pin is still visible however. My screen is touchscreen. I can "erase" the black with my finger and the normal login screen appear underneath. Inputting my pin is no problem and after login I don't see this problem anywhere else.
View 5 RepliesI use a good password in the windows login screen, but I was wondering, how hard (or easy) is it to break past this screen.
In old versions, you could go to dos mode and then just "dir" your way around and everything was visible.