i have got an upgrade of window 10 2 days back...i have installed it but wireless driver is not installing on my laptop as i have tried it many times....i have installed driver tool kit but it needs internet as i can not connect to any W-network because of driver incompatibility.
View 1 Replies
I was trying to install a driver to see if the performance would increase. It crashed my system. Also, a crash occurred yesterday and the day before yesterday.
JESSE-PC-Fri_01_22_2016_224559_47.zip
I've been hearing about this issue for people with Nvidia GPUs. The driver cannot be installed, and it says that there is no compatible hardware. My GPU is a GTX 960. What should I do to get the driver installed on Windows 10?
View 1 RepliesDell WLAN bluetooth driver is not installing on my laptop . I found out that the same driver is working fine on my friend's laptop and i even used same driver for windows 8.1 previously.While I install it ,it shows an error that "The installer cannot run on this platform...",,I even tried refreshing my laptop but still it didnot work..
View 19 RepliesI upgraded to windows 10 a day or so after it was released and now when I go to plug in my laptop to tv via hdmi or when I plug in an old xbox360 wired controller it keeps telling me that it found the updates for the drivers but encountered an error while attempting to install them. It doesn't give me an error code for this. Also when I check the updated center is says it could not install updates and gives me an error: Error 0x8000ffff.
View 10 RepliesI am using Windows 10 in Microsoft Surface Pro 4 tablet. I installed Fresco Logic Thin2000 USB display driver in Windows 10. After the reboot windows 10 started crashing. I did boot in safe mode but safe mode is preventing me from uninstalling it.
What do I do? this was installed so that I could connect device to projector. In safe mode I am unable to remove it and windows 10 is not booting in normal mode. It showing error system_service_exception(Ddkmd.sys) at boot.
Using windows update I was installing the MS Drawing Driver and my keyboard flashed (blue lights) and the next thing a BSOD. I have attached the collected files, how to confirm the MS Drawing Driver is responsible.
View 4 RepliesI have an Asus Maximus VI Hero and am trying to download drivers after my clean install of Windows 10. I downloaded the file for my boards audio driver from the asus website but when I ran it the program kept saying it needed to uninstall the previous driver before installing the new one and then restart. It kept restarting and doing that over and over again never actually installing the new driver.
View 1 RepliesI've just bought my first SSD and want to install windows 10 onto it. I used the media creation tool to install the OS onto a bootable USB but when I try to install the software onto my SSD I get an error. It reads:
"A media driver your computer needs is missing. This could be a DVD, USB or Hard disk driver. If you have a CD, DVD or USB flash drive with the driver on it, please insert it now."
I have tried hooking up my optical drive and inserting the disks that came with the motherboard and graphics card but it says it can't find any drivers. I'll attach an image below of the problem I'm facing.
Windows 10 keeps installing the ASUS Smart Gesture touchpad driver on my laptop. The driver is garbage and it runs three memory resident processes, which seems rather excessive for a touchpad driver. The default Windows touchpad driver works perfectly well, so I want to use that instead of the ASUS driver. However, if I uninstall the ASUS driver Windows Update quickly reinstalls it.
I disabled automatic driver installation when I installed Windows 10, as you can see here:
Despite that Windows update keeps installing the ASUS Smart Gesture driver.
how I can make it stop?
Windows 10 Pro and I am having an issue with my Touchpad driver, it seems to want to mess up and not move to where I need it to go, so I uninstalled it from the Programs and Features menu, but my issue is it keeps popping back up in Windows Update and installing on its own, I don't want the driver for it as it doesn't function correctly with it installed it works great when its not installed so how can I hide it
View 1 RepliesI keep getting these two error
i) Driver IRQL NOT_LESS_OR_EQUAL error
ii) Driver_Power_State_Error
It was fine last night then suddenly today, this error keep appearing. Is there a way to fix it? I've been searching for solution but I still don't know what to do.
I like to think I am fairy familiar with installation and set-up but this has got me beat. After installing Windows 10 my wifi continually drops out every 10 minutes or so. Cable connections are fine and other devices in the house are fine; just my laptop.
View 1 RepliesMy Dell laptop which is windows 10 only has a chronic problem with the adapter constantly needing to be reset. Searching for similar problems led me to the possibility of a USB adapter.
View 1 RepliesYooooo! I have a Lenovo Y510p with modified BIOS so I could replace the crappy Intel wireless card that came with it (Intel Centrino N2230) for an Azurewave - Broadcom 4352. The experience has been good so far, the only problem I'm having is the low wireless signal with the card. I have other laptops that have higher range and strengths on the same place with older cards.
I've tried verifying (and even swapping) the cables and noted no difference. I asked on another forum and they told me that it could be that the card is not receiving enough power, but I have yet to find a settings in the BIOS or in Windows that dwindles its performance. I have recently updated the driver from Lenovo's website and it didn't improve a bit. How to improve the wireless signal?
Yesterday, I successfully installed Win 10 on a neighbor's Win 7 laptop. However, it could not connect to the internet, explaining that his Wi-Fi software (which worked fine with Win 7) was incompatible with Win 10. I switched him to DSL and he is doing fine. But how do I get him compatible Wi-Fi software?
My three laptops are all Windows 8 Spanish edition, upgraded to 8.1, and then upgraded to 10. All run wireless with no problem.
I was update my windows, after that i turn off then turn on my laptop and then my wireless connection couldn't on even i tried to restart and try to click on, it cant be on, how to fix this things? I really need to connect to internet
View 3 RepliesI installed the upgrade on my toshiba satellite everything seems ok except i cannot connect to the internet via wireless only ethernet cable and there is no sound. I have run a toshiba diagnostic and it offers no resolution.
View 1 RepliesI just got my first PC today and I'm a bit of noob. I tried to connect to the internet but noticed that there simply was no option to connect to a wireless network. A wired network works fine though. I checked on the internet. I have a gigabyte z170x gaming 7 as my motherboard. URL....
View 1 RepliesI am having major issues with Windows 10 Pro and my wireless card in my desktop. I have an ASUS Maximus Impact VII with the mPCIe Combo IV WiFi card. I had to disable the card in the BIOS just to get Windows 10 installed. I re-enable the card and can boot into W10, it shows up in Device Manager and adapters (greyed). I can't enable it. Tried uninstalling and deleting drivers, then scan for new hardware. It kicks the card on and I get WiFi bars in the taskbar, but then immediately freezes Windows. This is coming from a clean install of 10, no VPN in 8.1 and I tried the reg delete command to make sure. I purchased a USB WiFi adapter to see if it would work. Same results. I decided I would install Windows 7 out of curiosity. SAME THING. It's strange, the WiFi works flawlessly in Windows 8.1, but not at all in 7 or 10. I have tried the 3 latest BIOS revisions for my motherboard, as well as the only available W10 driver for the adapter.
View 1 RepliesI have sony vaio series s wireless connection was working before now when i tried to turn on it's directly come to off. I cannot connect to my hotspot also there is and x sign on the wireless logo on the task bar !!
View 1 RepliesI started my PC in a new premises with a Wireless modem, I have two other PC's connected.
When I started the PC it saw the wireless network and the option came up to connect and there was a tick in the "Connect Automatically" box.
I selected OK but got a message "unable to connect".
I did not get the opportunity to enter the Password/Key.
Now the PC will not connect to the Network nor will and Diagnose and repair fix anything.
BTW the Ethernet adaptor has been disabled.
The laptop I am sending this from is next to the PC so the wireless signal is okay.
I have just bought an HP laptop running windows 10. I cannot connect to internet wirelessly as when I select my network connection it requests username and password. (Screen shot attached)I only have a network password for my connection and have never had or been requested for a username.
We have a couple of laptops at home and they connect with password only no problem. It is only this laptop that requests both. I can find no way past it and cannot connect. It connects via cable fine but thats obviously not ideal for portable laptop.
We have a new (albeit old) wireless printer (HP Color laserjet CP3525) with a wireless adapter card. Computers running Windows 7 or Windows 8 could see the network and connect. All computers could then print to the printer. None of our computers running Windows 8.1 could see the network. I upgraded one computer to Windows 10. It can now see the printer network but cannot connect.
View 7 RepliesUpgraded a client's Windows 8.1 machine to Windows 10 Pro today and it's now unable to "see" the HP OfficeJet 6600 wireless printer directly behind it. I've assigned the printer a static IP address and I CAN ping it AND print to it from a wireless computer in the back office. However, I can NOT either ping it or print to it from the front computer. The Add Printer wizard never sees it either.
The computer has both a wired Ethernet and a wireless adapter. Both are enabled and show up in IPCONFIG.
On installing Win !0 there was no wireless function, but win 10 initialised the card however when the laptop sleeps the card drops out and it has to be reset every time the card is Intel(R) Pro/Wireless 3945ABG. If the laptop is kept awake there is no problem
View 5 Replies
