Reports :: Subtracting From Previous Line In Report To Make Running Total

Jun 16, 2014

I have a database and one of the functions is to track the purchase of fuel. Part of purchasing fuel is registering what the current odometer reads. My query gets the Vehicle ID, Date of Transaction and Odometer reading. I want to show a report that shows how many miles the vehicle is has traveled for a certain amount of time. If it's for 2013 then I'll put the criteria for 2014 in the date. This will give me a list of all vehicles and their odometer readings. I then sort the date by ascending.

In the report I group on vehicle ID and then I want to show all their transactions and add up how many miles were driven.

Vehicle 1

1/2/201
1/5/2013
1/15/2013
ETC...
Total Miles Driven in 2014: XXXXXX

View Replies


ADVERTISEMENT

Reports :: How To Insert Enough Blank Line In Order To Make Each Report The Same Length

Aug 22, 2013

I have a main report / subreport relation, just want to have a fixed length of each printout. e.g the total number of lines of the subreport should be 8 lines. However, lots of subreports contain records less than 8. I would like to know how to insert of blank line in the subreport depending on the records with content at each print, in order to make the total number of lines in each subreport is 8 each print!!

View 1 Replies View Related

Queries :: Make Table Query Not Working Because Of Running Total?

Nov 12, 2014

I have a running total query that seems to run but when I try to total the query results then Access will be "Not Responding". I tried to change it to a Make Table query because I need to use the running total result in another query. So I created a table but when I try to run the make table query it just says "Run Query" at the bottom. Here is the query:

SELECT [OTMissing].[Employee], [OTMissing].[AsOf], [OTMissing].[HRsEarn], (SELECT Sum(OT1.[HRsEarn]) FROM [OTMissing] As OT1
WHERE OT1.[Employee]=[OTMissing].[Employee] AND OT1.[AsOf] <=[OTMissing].[AsOf]) AS RunningTotal, [OTMissing].[RemainPP] INTO OTGenerated
FROM [OTMissing]
ORDER BY [OTMissing].[Employee], [OTMissing].AsOf;

My OTMissing query is 47061 rows. Does that have something to do with it? The only other thing it might be is that most of the records have 0 although I'm not sure why it would be a problem I thought I would at least mention it.

View 2 Replies View Related

Reports :: Running Total For Each Day?

Jan 27, 2014

what I think is a running total for each day. I have a form that collects data several times in the day. I want a report to show a total for each day and subtotals for each column and grand totals. I can add the dates and used a running total to the report but the report will show all the entries made for the day not a single total for the day. (I hope I said the correctly.) This needs to be done for all columns. I'm not sure what I'm doing wrong. I've attached what I have so far.

View 2 Replies View Related

Reports :: Running Total With Multiple Columns

Mar 7, 2013

I am using Access 2003 and trying to create a report that has a running balance of payments into an account. There are also payments out of the account which reduce the balance.

When I add the other columns into the expression for the running total the result shows in the report as "0".

The expression I am using is: =([Escrow Pmt Amount]-[Ins Pmt Amount])

I have this expression in the "Detail" section of the report with the "Running Total" toggled to "Accross Group".

How can I subtract the values in the other columns (Outgoing Payments) from the balance and continue the running total.

The list of payments within the report are date driven and grouped by an account number.

View 1 Replies View Related

Queries :: Remove GROUP BY Line And Stick Semicolon At End Of Previous Line

Jun 25, 2013

Here's the statement

Code:

sqlfinal = "SELECT Employees.ID, Employees.Name "
sqlfinal = sqlfinal & "FROM ((qryDeptVBA INNER JOIN qrySkillVBA ON qryDeptVBA.ID = qrySkillVBA.ID) "
sqlfinal = sqlfinal & "INNER JOIN Employees ON qryDeptVBA.ID = Employees.ID) "
sqlfinal = sqlfinal & "INNER JOIN qryAreaVBA ON Employees.ID = qryAreaVBA.EmpID "
sqlfinal = sqlfinal & "GROUP BY Employees.ID, Employees.Name;"

If i simply remove the GROUP BY line and stick the semicolon at the end of the previous line (.EmpID; ) it works just fine. How is adding a group by line causing an error?I tried adding another parenthes at the beginning ((( and ending the joins as EmpID); and that failed with the exact same error.

View 12 Replies View Related

Modules & VBA :: Subtracting Value On Current Record From The Value Of Previous Records?

Jun 5, 2013

I want subtrack a value on the current record from the previous record and display the result in text box in subform datasheet. This is done during data entry. The calculation works most of the time and randomly it returns the wrong value. I have the code in an after update event after I enter a number. Here is what my code looks like:

sysHopSpacing = Abs([sysHop1] - DLookup("[sysHop1]", "tblSystemConfiguration", "[sysBaseNumber]=Forms![frmTempestCoordination]![frmSubSystem]![sysBaseNumber] - 1 "))

This is how I generate the sysBaseNumber

sysBaseNumber = Nz(DMax("sysBaseNumber", "tblSystemConfiguration", "sysAccountID=" & Forms!frmTempestCoordination!accAccountID), 0) + 1

I am using DMax so I can keep the subform records with the parent form record.

My results are inconsistant:

This is what I want the subform to do when subtracking from the previous record

syshop1 sysHopSpacing
5
20 15
30 10

Instead I get a result that does not make sense like this:

sysHop1 sysHopSpacing
5
20 15
30 4

I cant trace it down.

View 14 Replies View Related

Reports :: Report Items Filling A Line Then Next

Oct 17, 2013

using Access 2000.I have a table with fields (image, info1, info2, info3).I want to produce a report where 15 records are displayed in a table like manner. each table cell contain the whole record and the table is 5 rows by 3 columns.

View 4 Replies View Related

Reports :: Row (Line Item) Number On Report

Mar 26, 2014

I want to have line item numbers on report look like this:

Number....Order Number
1............9533-1425-20
2............5866-3411-14
3............2332-2355-14
3............2332-2355-14 ->repeating item
4............4399-5208-12
5............7392-2305-62
5............7392-2305-62 ->repeating item
6............2332-2355-14

Each new row of record needs to have their own line item number starting from 1 with criteria if order number is the same then carryover line item number on that record. I know how to get line item starting from 1 to last by assigning unbound control field with entry "=1".

View 14 Replies View Related

Queries :: Self-Referencing Running Total Used To Calculate Next Total In A Query

Jul 23, 2015

I am trying to create a query that has a self referencing running total based on the values (point totals) of itself (running total of values in the running total column that have already been calculated for all previous records) plus the total of new points being added in the current record, less the total of points being removed in the current record. This running total can never go below 0, if it does, the running total should restart at zero and add in only new points and begin the process again with the next records

I am able to do this in Excel in less than two seconds so I know there has to be a way to port this into a query. I've attached an excel example of what I am exactly trying to do

If it takes multiple queries to complete the required output I am ok with it. In my previous outtakes I have had up to 8 queries but just couldn't seem to do it..

View 9 Replies View Related

Reports :: Line Breaks In A Memo Field In Report

Mar 21, 2015

I created a form with a memo field. Data is entered. How do I get the data to print on the report on separate lines rather than one continuous paragraph? For example: Entered in form:

2/1/15 visit to house. 2/2/15 ordered new locks for doors. 2/5/15 Locks installed.

Print view on Report:

2/1/15 visit to house.
2/2/15 ordered new locks
2/5/15 locks in stalled.

View 1 Replies View Related

Reports :: Grid Line On Bottom / Last Record Of Report

Oct 25, 2013

I created a report that only has gridlines around the outside border of the entire report (rather than around each record). I want the grid line style on the last/bottom record to be solid so it boxes in all the records. When I change the "Gridline Style Bottom" for the records, each record has a bottom gridline rather than an outside box around all the records.

View 1 Replies View Related

Total Of All The Reports In One Report

Jun 24, 2006

I have designed many queries in my db and report for every single query. Each report has count filed. =Count(*).

Now I want a report to show these count fields. Which will serve purpose to get overall summary report. I have tried using

[Report]![name of field]

but it does not work.

Could somebody please help?

View 1 Replies View Related

Reports :: Report Showing Data From Previous Run?

Feb 9, 2015

I have a REPORT containing 7 ('columnar') subreports. Each subreport is to show showing a days worth of medical doses.... to visually represent a wall planner.

When the report loads - user enters a week value # via Inputbox(). This value is written to a TEMP table. Each subreport accesses this same TEMP table to retrieve the week # value. In the Recordsource for each subreport I have the following code :

SELECT * FROM GETPATIENTREADINGS_WEEK WHERE (((Format([DateR],'ww'))=DLookup("WeekVal","[TEMPTABLE]")) AND ((GETPATIENTREADINGS_WEEK.DayVal)=1));

... where the DayVal goes from 1...7 corresponding to the columnar position of each subreport on the display ie. for each day of the week.

The problem I am having is that when the report runs - I see the display showing the data from when the report was previously run. ie. I have to run the report twice to see the data for the correct week value entered. All the SQL works as expected when I run from Query view but when I run through VBA..

View 3 Replies View Related

Running Balance As Opposed To Running Total

Mar 14, 2005

Can anyone tell me how to get a running balance on a report. I know how to create a running total, by setting the "running sum" property of a text box to "Over all".

I can't however see how I can adapt this to give a running balance (as in a bank statement for example). Attempts to do so end up in failure!!

Many thanks in advance.
Peter

View 2 Replies View Related

Reports :: Remove Prompt While Running Report

Apr 8, 2015

I have a report that is created from the following query (qryTotalProjectHours). What I am trying to do is get the total hours spent on Tasks within a given time period.

Code:

SELECT TasksEntries.Project, TasksEntries.Task, Sum(TimeTracker.WorkHours) AS TotalHours
FROM TasksEntries INNER JOIN TimeTracker
ON (TasksEntries.EmployeeId = TimeTracker.EmployeeId) AND (TasksEntries.TaskID = TimeTracker.TaskId)
GROUP BY TasksEntries.Project, TasksEntries.Task;

I accept the start and end dates in a form and pass it like shown below. WorkDate is a column in the TimeTracker table and is not present in any other table.

Code:

strWhere = "WorkDate BETWEEN #" & txtMgrRptStartDate & "# AND #" & txtMgrRptEndDate & "#"
DoCmd.OpenReport "rptTotalProjectHours", acViewPreview, "qryTotalProjectHours", strWhere, acWindowNormal

When the report is invoked, I get a box where it says
"Enter parameter value" for Workdate..

Is there anyway I can get rid of the prompt? I never thought you needed the column name in the SELECT statement to be able to run this.I should add the I tried the query with the WorkDate hardcoded in there and it worked fine and returned the correct results

View 5 Replies View Related

Reports :: Microsoft Chart Object In Report - Formatting Line Weights

May 5, 2015

Using a Microsoft Chart Object 6.0 in an Access 2010 report. It's easy enough to do the basics and that chart responds to data.In my case, I have 12 lines, or columns, being controlled by data. It responds to the data. just fine. What I want to do is control the line weight and colour of each line through VBA.

You can click on the chart itself on the report form, but formatting the line you actually want is almost impossible. Pretending we can, you get the pop-up configuration windows and the TAB "PATTERNS". Under that, you can select "LINE" and then choose the style, color and weight. This is what I need to do in VBA.

Lines like this do not work:Graph_Data.Columns("A").Line.Weight = 5
or...
objDataSheet.Columns("A").Line.Weight = 5I tried a variety of versions of that and am pulling my hair out.

View 8 Replies View Related

Reports :: Subreport Total To Main Report

Dec 13, 2013

Access 2007
Windows 7

Trying to get a subreport total to show on my main report

getting #error no matter how I code

Running a subreport containing a total in report footer (only field that

name of subrpt total fld subrpt
[SubRptExp].[Report]![gramtrcvd]

View 9 Replies View Related

Reports :: Running A Report Outside Of Access For General Users

Mar 28, 2014

My database is slowly coming together. For the final part of this phase i would like to create a shortcut on each users desktop which runs a summary report of information within my database.

I have criteria set so upon opening the report the user is asked for which address they wish to see information from which works great. But I do not want users to have access to the database, I just want them to be able to click a shortcut, be asked what address they are looking for and for the report to ping up in a 'Print Preview' type layout so information can be seen and displayed but not altered. All users have the access program.

View 2 Replies View Related

Reports :: Access 2003 / Report Show Items From Previous Invoices?

Apr 15, 2013

I am building a replacement Access 2013 database for our ageing Access 2003 database. I have an invoice form with a subform with a combo box that allows me to select which jobs to invoice based on the customer selected in the invoice form, which is working fine. I have designed my invoice and have the criteria [Forms]![Invoice]![ID] in the report query so that it just selects the record that is open in the invoice form. I have an ID (which is the invoice number) group on the report and it is then sorted by date and then job number. I thought it was all working fine when I tested it, it is the same method as I used in the 2003 database. However I have a problem, when I make up and print the customers first invoice it works fine, but when I go to make up a second invoice for the same customer the invoice includes all the jobs from the first invoice as well, and if I then go to reprint the first invoice all the jobs from the second invoice as there as well.

View 1 Replies View Related

Reports :: How To Show Total From Amount Of A Report On Single Form

Feb 18, 2014

I am trying to build a form that can show the total from the amount that the report generate.

View 3 Replies View Related

Reports :: Reset Total Pages For Each Group In Access Report

Mar 3, 2013

I can not get my Access Report to give me a total number of pages by group. I've been able to have it give the correct page number per group but not the total number of pages in each group. I've looked at the threads and it appears that in order to get this, you must do a 2 part pass. 1st to get the page number and then to get the total papers per group.

I've used the code supplied and when I do a print preview, I get the message that it can not find the control, Me!ctlGrpPages. This is the control I created and placed in my page footer section of the report. I've also seen numerous references to the report, "Employee Sales by Country" in the Northwind database. I downloaded the database but could not find this report in the database.

View 3 Replies View Related

Reports :: Summing Information On A Report - Total Percentage Of Time?

Apr 19, 2013

I have a question about summing information on a report. I am developing a report to see have percentage of time Staff work within a certain area. On the data base the time percentages entered as ranges e.g. 75-100%, or 11-25%. We needed to figure out the total percentage of time so I created a report to add the total time. I used a text box which it titled FTE_Total if embedded iif functions to display the total time. Here is the function I used:

=IIf([FTE_Percentage]="76-100%",1,IIf([FTE_Percentage]="51-75%",0.75,IIf([FTE_Percentage]
="26-50%",0.5,IIf([FTE_Percentage]="11-25%",0.25,IIf([FTE_Percentage]="1-10%",0.1,0))))).

This worked perfectly however I cannot get the FTE_Total fields to sum. I tried the following function in the group footer: =Sum([FTE_Total]) but everytime I try to look at the report in report view I get a message asking for the FTE_Total Parameter.

View 1 Replies View Related

Reports :: Generate A Report For Items In Previous Sentence Not Completed To Keep Track Of Workload

Jul 29, 2013

I'm completely new to Microsoft Access. This project was thrown my way. I have an accounting database to track payables, receivables, financials, and deliquencies/collections. Is there a way to generate a report for any of the items in the previous sentence that haven't been completed to keep track of workload.

View 5 Replies View Related

Reports :: Access 2007 Crashes When Running Report Based On Query

Apr 14, 2014

I have DB in access 2007. I have a report that is uses a select query to generate the information for the report. It has been working great, But however lately like maybe with in the last month, it has been causeing Access 2007 to crash. I am having the same issue with another DB that uses the same information but that information is imported in. both Databases have worked great up until two months ago. Microsoft states that it is because of the program. I have tried to repair the DB by using the Repair option. I am confused as to why this would be happening. I can create a new report and it seems to work. but I do not want to change all the DB on everyone's computer just for this reason. I also have two buttons on my report that utilize macros to close or print the report.

View 6 Replies View Related

Reports :: Populate Table With Price From DLookup In Form To Total In Report

Apr 25, 2013

I am working with a database that I downloaded and am trying to modify to fit my needs.

This is an inventory database. The products table contains a description and pricing. I want the description and pricing to populate in the Purchase Order form, so I added Dlookup fields in the Purchase Order form. I was happy.

However, the pricing information is not populating to my Inventory Transactions Table from the Purchase Order form by way of this Dlookup feature, and therefore will not show on my report, and in turn does not show in my Total of my Purchase Order report.

As a work around, I tried creating a calculation in the purchase order report, of =[UnitsOrdered]*[Products.UnitPrice], and the pricing totals show fine on my report, but the subtotal doesn't work.

I was unable to upload my file...so a few notes of info...

There are no queries set up in the database for this report.

I had tried a sorting grouping thing (in the Report) by Subtotal, but now can't get rid of it.

When I show the field list for the report, across the top of the window reads:

SELECT DISTINCTROW Employees.*, Products.*, [Inventory Transactions].*, [Purchase ORders].*, Suppliers.*, nz([Inventory Transact

Looks like it runs out of space

I am trying to attach a couple of images to support my comments.

Since this issue crosses both reports and forms (and tables!), I am not sure where to properly post. The end result I am looking for is on my report.

I am using Access 2003...

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved