Insert Data Of Table 2 To Table 1,how?

Jan 5, 2007

Table 1:
cityId ,cityname,state
and
Table 2:
Id,cityname,State,...

There are a large amount of data (Cityname and State)in table 2 is valueable,I want insert them into table1.

But I don't know how,anybody can help?what I should do and what I should notice?
Thank you!

View 1 Replies


ADVERTISEMENT

SQL Server 2012 :: Compare Two Table Data And Insert Changed Field To Third Table

Aug 12, 2014

I want Compare two Table data and insert changed field to the third table ...

View 9 Replies View Related

SSMS Express: Create TABLE && INSERT Data Into Table - Error Msgs 102 && 156

May 18, 2006

Hi all,

I have SQL Server Management Studio Express (SSMS Express) and SQL Server 2005 Express (SS Express) installed in my Windows XP Pro PC that is on Microsoft Windows NT 4 LAN System. My Computer Administrator grants me the Administror Privilege to use my PC. I tried to use SQLQuery.sql (see the code below) to create a table "LabResults" and insert 20 data (values) into the table. I got Error Messages 102 and 156 when I did "Parse" or "Execute". This is my first time to apply the data type 'decimal' and the "VALUES" into the table. I do not know what is wrong with the 'decimal' and how to add the "VALUES": (1) Do I put the precision and scale of the decimal wrong? (2) Do I have to use "GO" after each "VALUES"? Please help and advise.

Thanks in advance,

Scott Chang

///////////--SQLQueryCroomLabData.sql--///////////////////////////
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
VALUES (2, 'MW2', 'Dichloroethene', 1.00)
VALUES (3, 'MW2', 'Trichloroethene', 20.00)
VALUES (4, 'MW2', 'Chloroform', 1.00)
VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
VALUES (6, 'MW6S', 'Acetone', 1.00)
VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
VALUES (9, 'MW6S', 'Chloroform', 1.00)
VALUES (10, 'MW6S', 'Methylene Chloride', 1.00
VALUES (11, 'MW7', 'Acetone', 1.00)
VALUES (12, 'MW7', 'Dichloroethene', 1.00)
VALUES (13, 'MW7', 'Trichloroethene', 1.00)
VALUES (14, 'MW7', 'Chloroform', 1.00)
VALUES (15, 'MW7', 'Methylene Chloride', 1.00
VALUES (16, 'TripBlank', 'Acetone', 1.00)
VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
VALUES (19, 'TripBlank', 'Chloroform', 0.76)
VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
//////////Parse///////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
////////////////Execute////////////////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.

View 7 Replies View Related

Insert Data Into A Table From Two Tables Into A Single Table Along With A Hard Coded Value?

Feb 9, 2012

I'm trying to insert data into a table from two tables into a single table along with a hard coded value.

insert into TABLE1
(THING,PERSONORGROUP,ACCESSRIGHTS)
VALUES
((select SYSTEM_ID from TABLE2 where
AUTHOR IN (select SYSTEM_ID from TABLE2 where USER_ID
=('USER1'))),(select SYSTEM_ID from TABLE2 where USER_ID
=('USER2')),255)

I get the following-

Msg 512, Level 16, State 1, Line 1

Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.

The statement has been terminated.

Do I need to use a cursor?

View 5 Replies View Related

INSERT INTO - Data Is Not Inserted - Using #temp Table To Populate Actual Table

Jul 20, 2005

Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO

View 2 Replies View Related

Is It Possible To Insert Data Into A Table From A Temporary Table That Is Inner Join?

Mar 10, 2008

Is it possible to insert data into a table from a temporary table that is inner join?
Can anyone share an example of a stored procedure that can do this?
Thanks,
xyz789

View 2 Replies View Related

Stored Procedure For Insert Data From One Table To Another Table

Apr 25, 2006

Hi,
     I am having 2 tables. One is main table and another is history table. Whenever I update the main table, I need to insert the all the main table data to History table, before updating the main table.
Overall it is like storing the history of the table updation.
How do i write a stored procedure for this?
Anybody has done this before?
Pls help me.
 

View 1 Replies View Related

Transact SQL :: Insert Data From Temp Table To Other Table

Oct 5, 2015

I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary  (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.

Actual Data
Expected Result

1000
1-Aug
1000
1-Feb
1000
1-Jul
1000

[code]....

View 3 Replies View Related

Insert And Reformat Data - Table A To Table B

Jun 5, 2008

Hello,
I have a table called #table1 which is populated as in the example below.
I would like to write a selectinsert statement based on #table1 that populates #table2 like in the #table2 example.
Note #table2 is a fixed table that follows the structure below.

Can any of you T-SQL gurus help me with my problem?
Any help will be most appreciated.
Thanks

---------------------------------------------
/*
Please paste T-SQL into query window
*/
---------------------------------------------
CREATE TABLE #table1
--max of 5 orders
(
custID nvarchar(6),
dateorder [datetime] NULL,
order1 nvarchar(2),
order2 nvarchar(2),
order3 nvarchar(2),
order4 nvarchar(2),
order5 nvarchar(2)
)

GO
SET ANSI_PADDING OFF

Insert into #table1
select '012345','2008-04-19 00:00:00.000' , '01', '06', '05', null, null UNION all
select '012345','2008-04-20 00:00:00.000' , '01', '07', '05', '07', '03' UNION all
select '012345','2008-04-21 00:00:00.000' , '01', '06', null, null, null UNION all
select '012345','2008-04-22 00:00:00.000' , '01', '02', '05', '07', null UNION all
select '012345','2008-04-23 00:00:00.000' , '03', '06', null, null, null UNION all
select '987654','2008-04-21 00:00:00.000' , '19', '21', null, null, null UNION all
select '987654','2008-04-22 00:00:00.000' , '01', '02', '05', '16', null UNION all
select '987654','2008-04-23 00:00:00.000' , '03', '06', null, null, null

select * from #table1

--This is the table i would like to insert my data into
CREATE TABLE #table2
--max of 5 orders in 1 day
--it does not matter what date the date order was made the 1st date would appear in dateorder1 and so on...
(
custID nvarchar(6),
dateorder1 [datetime] NULL,
order1_1 nvarchar(2),
order1_2 nvarchar(2),
order1_3 nvarchar(2),
order1_4 nvarchar(2),
order1_5 nvarchar(2),
dateorder2 [datetime] NULL,
order2_1 nvarchar(2),
order2_2 nvarchar(2),
order2_3 nvarchar(2),
order2_4 nvarchar(2),
order2_5 nvarchar(2),
dateorder3 [datetime] NULL,
order3_1 nvarchar(2),
order3_2 nvarchar(2),
order3_3 nvarchar(2),
order3_4 nvarchar(2),
order3_5 nvarchar(2),
dateorder4 [datetime] NULL,
order4_1 nvarchar(2),
order4_2 nvarchar(2),
order4_3 nvarchar(2),
order4_4 nvarchar(2),
order4_5 nvarchar(2),
dateorder5 [datetime] NULL,
order5_1 nvarchar(2),
order5_2 nvarchar(2),
order5_3 nvarchar(2),
order5_4 nvarchar(2),
order5_5 nvarchar(2)
)

Insert into #table2
select '012345','2008-04-19 00:00:00.000' , '01', '06', '05', null, null, '2008-04-20 00:00:00.000' , '01', '07', '05', '07', '03','2008-04-21 00:00:00.000' , '01', '06', null, null, null,'2008-04-22 00:00:00.000' , '01', '02', '05', '07', null,'2008-04-23 00:00:00.000' , '03', '06', null, null, null UNION all
select '987654','2008-04-21 00:00:00.000' , '19', '21', null, null, null ,'2008-04-22 00:00:00.000' , '01', '02', '05', '16', null,'2008-04-23 00:00:00.000' , '03', '06', null, null, null , null, null, null, null, null, null, null, null, null, null, null, null

select * from #table2


drop table #table1
drop table #table2

----------------------------------------

View 2 Replies View Related

Transact SQL :: Insert Data To Different Table From Other Table

Aug 22, 2015

we have a table below

TABLE1
ID         Roll        Name         Amount     . . . . . . so on
---------------------------------------
1            2           Alex            500
2            5           Jones          600
3            2           Ales            400

and we have TABLE 2

ID         Roll        Name         Amount   . . . . . . . so on

In both the Tables ID Field is Identity Field and rest all the columns are identical in both the tables.I want to perform a query in such a way that SQL Should,

1) Remove all data from TABLE2 First
2) Select those records from TABLE1 where Roll = 2
3) Then, Insert the results to TABLE 2

So we should get the result similar to below:

ID         Roll        Name         Amount   . . . . . . . so on
---------------------------------------
1            2           Alex            500
3            2           Ales            400

how can I do this in a same sql statement.

View 3 Replies View Related

Insert Data From A Table Into A Table Of A Different Database

Sep 24, 2006



I have two databases in SQL Server and they both have almost the same tables. I want to insert the data of a table from the first database into a table with the same name, but from the second database. How can i do this?

View 1 Replies View Related

DB Design :: Insert Data From One Table To Another Table

Jul 30, 2015

I have to tables like given below Landing table "A" (Data load will happen over here, No primary keys mentioned over here) table "B" .Now I want to move the data from A to B.I have made use of below query insert into B select * from A...Landing table "A" has huge no of records, MS SQL server is taking huge amount of time.any alternative way to make this insertion process faster?

View 6 Replies View Related

SQL Server 2008 :: Insert Data Into Table Variable But Need To Insert 1 Or 2 Rows Depending On Data

Feb 26, 2015

I am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)

I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !

Below is the code i have at the moment

declare @startdate as datetime
declare @enddate as datetime
declare @Line as Integer
DECLARE @count INT

set @startdate = '2015-01-01'
set @enddate = '2015-01-31'

[Code] .....

View 1 Replies View Related

I Have Created A Table Table With Name As Varchar And Id As Int. Now I Have Started Inserting The Rows Like, Insert Into Table Values ('arun',20).

Jan 31, 2008

I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50.                 insert into Table values('arun's',20)  My sqlserver is giving me an error instead of inserting the row. How will you solve this problem? 
 

View 3 Replies View Related

Insert Data From One Table Into Another Table

Nov 28, 2006

I need to include data from one table to another. What I need is to take the info from a field in Table A and insert that into a field in Table B based on matching info in another field.

Basicly I ahve the following scenario.

Table ProductVariant with fields ProductID and DisplayOrder and Table ProductCategory with fields ProductID and DisplayOrder

I need to include the DisplayOrder info from Table ProductVariant into field DisplayOrder in Table ProductCategory based on a match in field ProductID

so If ProductVariant has the following records
ProductID DisplayOrder
1000 12
1001 25
1002 42

And ProductCategory has
ProductID DisplayOrder
1000 1
1001 1
1002 1

The DisplayOrder field in ProductCategory should be updated to look like

ProductID DisplayOrder
1000 12
1001 25
1002 42

I have used SET to change values in field such as changing prices by using

UPDATE ProductVariant
SET Price = Price*1.05

to increase prices by 5% but cannot figure and have also used it to include text from one field to another within the same table but I cannot figure out how to do it when data needs to come from a different table and needs to be qualified based on yet another field

Any suggestions or directions to info that will help me. Everything I have come across so far is for more complex needs and doesn't suit my level of experience with SQL. I am using SQL 2005 Enterprise Edition



View 1 Replies View Related

SQL Server 2008 :: Insert From Table 1 To Table 2 Only If Record Doesn't Exist In Table 2?

Jul 24, 2015

I'm inserting from TempAccrual to VacationAccrual . It works nicely, however if I run this script again it will insert the same values again in VacationAccrual. How do I block that? IF there is a small change in one of the column in TempAccrual then allow insert. Here is my query

INSERT INTO vacationaccrual
(empno,
accrued_vacation,
accrued_sick_effective_date,
accrued_sick,
import_date)

[Code] ....

View 4 Replies View Related

Default Table Owner Using CREATE TABLE, INSERT, SELECT && DROP TABLE

Nov 21, 2006

For reasons that are not relevant (though I explain them below *), Iwant, for all my users whatever privelige level, an SP which createsand inserts into a temporary table and then another SP which reads anddrops the same temporary table.My users are not able to create dbo tables (eg dbo.tblTest), but arepermitted to create tables under their own user (eg MyUser.tblTest). Ihave found that I can achieve my aim by using code like this . . .SET @SQL = 'CREATE TABLE ' + @MyUserName + '.' + 'tblTest(tstIDDATETIME)'EXEC (@SQL)SET @SQL = 'INSERT INTO ' + @MyUserName + '.' + 'tblTest(tstID) VALUES(GETDATE())'EXEC (@SQL)This becomes exceptionally cumbersome for the complex INSERT & SELECTcode. I'm looking for a simpler way.Simplified down, I am looking for something like this . . .CREATE PROCEDURE dbo.TestInsert ASCREATE TABLE tblTest(tstID DATETIME)INSERT INTO tblTest(tstID) VALUES(GETDATE())GOCREATE PROCEDURE dbo.TestSelect ASSELECT * FROM tblTestDROP TABLE tblTestIn the above example, if the SPs are owned by dbo (as above), CREATETABLE & DROP TABLE use MyUser.tblTest while INSERT & SELECT usedbo.tblTest.If the SPs are owned by the user (eg MyUser.TestInsert), it workscorrectly (MyUser.tblTest is used throughout) but I would have to havea pair of SPs for each user.* I have MS Access ADP front end linked to a SQL Server database. Forreports with complex datasets, it times out. Therefore it suit mypurposes to create a temporary table first and then to open the reportbased on that temporary table.

View 6 Replies View Related

Insert Command Fails When I Want To Insert Records In Data Table

Apr 20, 2008

On my site users can register using ASP Membership Create user Wizard control.
I am also using the wizard control to design a simple question and answer  form that logged in users have access to.
it has 2 questions including a text box for Q1 and  dropdown list for Q2.
I have a table in my database called "Players" which has 3 Columns
UserId Primary Key of type Unique Identifyer
PlayerName Type String
PlayerGenre Type Sting
 
On completing the wizard and clicking the finish button, I want the data to be inserted into the SQl express Players table.
I am having problems getting this to work and keep getting exceptions.
 Be very helpful if somebody could check the code and advise where the problem is??
 
 
<asp:Wizard ID="Wizard1" runat="server" BackColor="#F7F6F3"
BorderColor="#CCCCCC" BorderStyle="Solid" BorderWidth="1px"
DisplaySideBar="False" Font-Names="Verdana" Font-Size="0.8em" Height="354px"
onfinishbuttonclick="Wizard1_FinishButtonClick" Width="631px">
<SideBarTemplate>
<asp:DataList ID="SideBarList" runat="server">
<ItemTemplate>
<asp:LinkButton ID="SideBarButton" runat="server" BorderWidth="0px"
Font-Names="Verdana" ForeColor="White"></asp:LinkButton>
</ItemTemplate>
<SelectedItemStyle Font-Bold="True" />
</asp:DataList>
</SideBarTemplate>
<StepStyle BackColor="#669999" BorderWidth="0px" ForeColor="#5D7B9D" />
<NavigationStyle VerticalAlign="Top" />
<WizardSteps>
<asp:WizardStep runat="server">
<table class="style1">
<tr>
<td class="style4">
A<span class="style6">Player Name</span></td>
<td class="style3">
<asp:TextBox ID="PlayerName" runat="server"></asp:TextBox>
</td>
<td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server"
ControlToValidate="PlayerName" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
</tr>
<tr>
<td class="style5">
 
<td class="style3">
<asp:DropDownList ID="PlayerGenre" runat="server" Width="128px">
<asp:ListItem Value="-1">Select Genre</asp:ListItem>
<asp:ListItem>Male</asp:ListItem>
<asp:ListItem>Female</asp:ListItem>
</asp:DropDownList>
</td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server"
ControlToValidate="PlayerGenre" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
 
</tr>
</table>
  Sql Data Source
<asp:SqlDataSource ID="InsertArtist1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" InsertCommand="INSERT INTO [Playerst] ([UserId], [PlayerName], [PlayerGenre]) VALUES (@UserId, @PlayerName, @PlayerGenre)"
 
ProviderName="<%$ ConnectionStrings:ConnectionString.ProviderName %>">
<InsertParameters>
<asp:Parameter Name="UserId" Type="Object" />
<asp:Parameter Name="PlayerName" Type="String" />
<asp:Parameter Name="PlayerGenre" Type="String" />
</InsertParameters>
 
 
</asp:SqlDataSource>
</asp:WizardStep>
 
 Event Handler
 
To match the answers to the user I get the UserId and insert this into the database to.protected void Wizard1_FinishButtonClick(object sender, WizardNavigationEventArgs e)
{
 SqlDataSource DataSource = (SqlDataSource)Wizard1.FindControl("InsertArtist1");
MembershipUser myUser = Membership.GetUser(this.User.Identity.Name);
Guid UserId = (Guid)myUser.ProviderUserKey;String Gender = ((DropDownList)Wizard1.FindControl("PlayerGenre")).SelectedValue;
DataSource.InsertParameters.Add("UserId", UserId.ToString());DataSource.InsertParameters.Add("PlayerGenre", Gender.ToString());
DataSource.Insert();
 
}
 

View 1 Replies View Related

How To Insert Data From A File Into Table Having Two Columns-BULK INSERT

Oct 12, 2007



Hi,
i have a file which consists data as below,

3
123||
456||
789||

Iam reading file using bulk insert and iam inserting these phone numbers into table having one column as below.


BULK INSERT TABLE_NAME FROM 'FILE_PATH'
WITH (KEEPNULLS,FIRSTROW=2,ROWTERMINATOR = '||')

but i want to insert the data into table having two columns. if iam trying to insert the data into table having two columns its not inserting.

can anyone help me how to do this?

Thanks,
-Badri

View 5 Replies View Related

Insert Data From Another Table

Apr 27, 2000

Hi,

If I have 2 tables (Source and Destination) which have the same fields except the fields are not in same order, what is a practical way to insert all data from Source into Destination? I know that I can do insert with select but then I need to specify every single fields since the fields positions are different between Source and Destination.

Thank you for any help.

View 2 Replies View Related

How Can Insert A Data In To This Table?

Mar 10, 2006

SALAM SIR,
CREATE TABLE Airlines_Master
( Aircode CHAR(2),
Airlines_name VARCHAR(15))
THIS IS MADE A TABLE IN SQLSERVER 2000.BUT HOW CAN INSERT DATA INTO THIS TABLE?

View 3 Replies View Related

Bes Way To Insert Data Into Two Table.

May 2, 2008

I'm passing data into sql proc. then insert into two diffrent tables. The two table dont have 1:1 relations. I'm trying to come up with the best way to insert the values into these two table. Here is what I have-- any suggestion?

fyi. I will love the proc to check errors during the process

CRETAE PROCEDURE dbo.two_tableProc
@File1 varchar(5),
@File2 varchar(5),
@SystemDate datetime,
@RecordCt1 varchar(100)
@RecordCt2 varchar(100)
@RecordID INT

as

INSERT INTO tbl1
(
File1,
RecordCt1,
SystemDate

)
VALUES (@File1,@RecordCt1,@SystemDate)

INSERT INTO tbl2
(
File2,
RecordCt2,
RecordID
)
VALUES (@File2,@RecordCt2,@RecordID)

GO

Josephine

View 1 Replies View Related

Insert Data From XML To A Table?

Dec 15, 2014

I tired to insert data from xml to a table .but only null value is getting inserted into the table.The query is attached below.

create table Detail_test1
(
DetailIdInt,
LaIdInt,
OcCodeVarchar,
BIdINT,
RateINT)
Declare @xml XML
set @xml='<ArrayOfBDetailLine>

[code]....

View 1 Replies View Related

How To Insert Data Into Table

Mar 15, 2006



can some one help me, how can i insert data, using some commands,

scenario,

two server, srv01 and srv02, both have database sales and both a table saleshistory

pseudocode:

insert into srv02.sales.dbo.saleshistory select * from srv01.sales.dbo.saleshistory where id > srv02.sales.dbo.saleshistory.max(id)

View 3 Replies View Related

What Is Best Way To Insert Data Into A Table?

Apr 8, 2008

Hello,

I wan t to insert into a tabla data from other tabla using a parameter, my question is. What is the better tool to make this? "Execute SQL Task" or extrat te data using "OLE DB Source" and then use "OLE DB Destination" to insert the data into the new table?

Thanks !!

Carmine

View 6 Replies View Related

Insert Data To A Table Where Select Data From Another SERVER

Oct 8, 2007

I had a function like below :Public Sub Getdata2(ByVal query, ByVal db, ByVal name)
Dim selectSQL As StringDim con As SqlConnection
Dim cmd As SqlCommand
Dim reader As SqlDataReader
Trycon = New SqlConnection("User ID=xxx;password=xxx;persist security info=True;Initial Catalog=database1;Data Source=xxx.xxx.xxx.xxx.xxx,xxxxx;")
Dim username As String
username = Request.QueryString("username")
selectSQL = "SET DATEFORMAT DMY;Insert into table1(hse_num, st_name, proj_name, unit_num, postal, n_postal, flr_area, flr_sf, flr_rate, flr_ra_sf, land_area, land_sf, land_rate, lnd_ra_sf, prop_code, cont_date, title, sisv_ref, r_date, rec_num, source, username, DGP, Remarks, Sub_Code, caveat, consider, age) select hse_num, st_name, proj_name, unit_num, postal, n_postal, flr_area, flr_sf, flr_rate, flr_ra_sf, land_area, land_sf, land_rate, lnd_ra_sf, prop_code, cont_date, title, sisv_ref, r_date, rec_num, source, '" & username & "', DGP, Remarks, Sub_Code, caveat, consider, age from [yyy.yyy.yyy.yyy,yyyy].database2.dbo.table2 where " & querycmd = New SqlCommand(selectSQL, con)
con.Open()
reader = cmd.ExecuteReader()
lbl.Text = selectSQLCatch ex As Exception
lbl.Text = ex.Message
Finally
If (Not con Is Nothing) Then
con.Close()
con.Dispose()
End If
End Try
End Sub
'------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 
May i know that how do i retrieve data from  [yyy.yyy.yyy.yyy,yyyy].database2.dbo.table2 due to diffrent server, diffrent UID and Password
 

View 1 Replies View Related

T-SQL (SS2K8) :: Stored Procedure To Truncate And Insert Values In Table 1 And Update And Insert Values In Table 2

Apr 30, 2015

table2 is intially populated (basically this will serve as historical table for view); temptable and table2 will are similar except that table2 has two extra columns which are insertdt and updatedt

process:
1. get data from an existing view and insert in temptable
2. truncate/delete contents of table1
3. insert data in table1 by comparing temptable vs table2 (values that exists in temptable but not in table2 will be inserted)
4. insert data in table2 which are not yet present (comparing ID in t2 and temptable)
5. UPDATE table2 whose field/column VALUE is not equal with temptable. (meaning UNMATCHED VALUE)

* for #5 if a value from table2 (historical table) has changed compared to temptable (new result of view) this must be updated as well as the updateddt field value.

View 2 Replies View Related

INSERT Data Into Table That Maybe Have That Primary Key Already

May 12, 2007

Hi, I'm not user to inserting data into databases, usually I just read the data.  So I think my problem might be pretty common.I have a table of longitudes, latitudes, city names, and country names.  I set the primary key to be the columns longitude and latitude.   I have a method that generates the user's location and the mentioned data.  So I want to only insert the new data into the database if it is new and unique.  currently if the same user goes to my site, it inserts the data fine the first time and then throws and error the second time because it is inserting duplicate primary key information.  Do I need to query the database to see if the data record already exists?  or is there a way to insert the record only if it is "new"?? Thanks for the help!! 

View 2 Replies View Related

How To Select && Insert Data In The Same Table

May 24, 2007

Hi
   I have a table called Version and its attributes are Version_ID, Project_ID , Hospital_ ID , Date_Created and comments. I want to select the data by Version_ID,Project_ID and  Hospital_ID and the selected data is inserted in the same table(Version) as new row .
Table: Version (Version_ID(Primary_key), Project_ID(Foreign_Key),Hospital_ID(Foreign_Key),Date_Created,Comments). 
Iam using Visual Web Developer Express and SQL Server 2005. Iam doing on asp.net 2.0.
Could anyone please send me the code asp.net 2.0 for the above problem.

View 6 Replies View Related

Problem During Insert Data From One Table To The Other

Aug 1, 2007

 Begin

INSERT Into aspnet_Membership (ApplicationId,UserId,Password,PasswordFormat,PasswordSalt,Email,LoweredEmail,IsApproved,IsLockedOut,CreateDate,LastLoginDate,LastPasswordChangedDate,LastLockoutDate,FailedPasswordAttemptCount,FailedPasswordAttemptWindowStart,FailedPasswordAnswerAttemptCount,FailedPasswordAnswerAttemptWindowStart)

Select '{FB1DA11C-F1AB-4E42-AAFE-E9EC8D6C607F}',UserId, cast(Rand() as nvarchar),0,'0',UserEmail,UserEmail,1,0,getdate() ,getdate() ,getdate() ,getdate() ,0,'01/01/1754',0,'01/01/1754'
From aspnet_Users

End
 
the problem is the Password field i try to insert to every record other password, but it give me at first a random numbers but it appear at all of the records...
what can i do that each record will get a random password?
 
Thanks

View 2 Replies View Related

MS SQL Question - Insert Data To A New Table

Oct 8, 2007

Hello, I am using a database .mdf and I want to insert values in a table (I mean how to connect also with a database, open it and store the values). Can someone describe the whole process to do that (as I am newbie in asp.net). I want the whole code if it is possible.
For example I am using the above code to create 2 textboxes where the user will write his name and password. Then I want to store (by clicking the button) the values to a table in database. Thank you
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Manufacturer.aspx.vb" Inherits="Manufacturer" %><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server"><title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:Label ID="Label1" runat="server" Text="Name"></asp:Label>
<asp:TextBox ID="TextBox1" runat="server"></asp:TextBox><br />
<asp:Label ID="Label2" runat="server" Text="Password"></asp:Label>
<asp:TextBox ID="TextBox2" runat="server"></asp:TextBox>
<br />
<br />
<asp:Button ID="Button1" runat="server" Text="Submit" /></div></form>
</body>
</html>

View 1 Replies View Related

Sql Server 7.0 Table Insert Data

Mar 21, 2000

If you are doing an insert into a table with 10 columns, but you only have values for 2, is it better to insert 2 and let the table default the others or is it better to insert all 10 using default values for the 8 you don't know? Do you know of any benefits one way or the other? Thanks in advance.

View 1 Replies View Related

Triggers - Insert Data To Another Table

May 3, 2006

How do I set up an insert trigger to copy all of the inserted data to another table? In other words, when someone adds a new paramater in the params table, I want to automatically create a matching set of data in the goals table. Thanks,Krista

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved