SQL Server 2008 :: Insert From Table 1 To Table 2 Only If Record Doesn't Exist In Table 2?
Jul 24, 2015
I'm inserting from TempAccrual to VacationAccrual . It works nicely, however if I run this script again it will insert the same values again in VacationAccrual. How do I block that? IF there is a small change in one of the column in TempAccrual then allow insert. Here is my query
INSERT INTO vacationaccrual
(empno,
accrued_vacation,
accrued_sick_effective_date,
accrued_sick,
import_date)
I have two different SQL 2008 servers, I don't have permission to create a linked server in any of them. i created a trigger on server1.table1 to insert the same record to the remote server server2.table1 using OPENROWSET
i created a stored procedure to insert this record, and i have no issue when i execute the stored procedure. it insert the recored into the remote server.
The problem is when i call the stored procedure from trigger, i get an error message.
Stored Procedure: USE [DB1] GO SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON
[Code] ....
When i try to insert a new description value in the table i got the following error message:
No row was updated the data in row 1 was not committed Error source .Net SqlClient Data provider. Error Message: the operation could not be performed because OLE DB provider "SQLNCLI10" for linked server "(null)" returned message "The partner transaction manager has disabled its support for remote/network transaction.".
correct the errors entry or press ESC to cancel the change(s).
Hi... I was hoping if someone could share me some thoughts with the issue that I am having at the moment.
Problem: When I run the package in my local machine and update local SS DB/table - new records writes OK in the table. BUT when I changed my destination meaning write record into another physical SS DB/table there is no INSERT data occurs. AND SO when I move/copy over that same package into another server (e.g. server that do not write record earlier) and run it locally IT WORKS fine too.
What I am trying to do is very simple - Add new records in a SS table using SSIS . I only care for new rows and not even changed rows. Here is my logic - 1. Create Ole DB source to RemoteSERVER - using SELECT stmt 2. I have LoopUp component that will look for NEW records - Directs all rows that don't find match and redirect rows (error output). 3. Since I don't care for any rows that is matched in my lookup - I do nothing or I trash the rows 4. I send the error rows (NEW rows) into OleDB destination
RESULTS when I run the package locally and destination table is also local - WORKS FINE; But when I run the package locally and destination table is in another Sserver (remote) - now rows is written.
The package is run thru BIDS manually so there is no sucurity restrictions attached to it.
I am not sure what I am missing. And I do not see error in my package either. It is not failing.
I am using SQL Server 2005 and trying to create a linked server on Oracle 10. I used the commands below: EXEC sp_addlinkedserver @server = 'test1', @srvproduct = 'Oracle', @provider = 'MSDAORA', @datasrc = 'testsource' exec sp_addlinkedsrvlogin @rmtsrvname = 'test1', @useself = 'false', @rmtuser='sp', @rmtpassword='sp'
When I execute select * from test1...COUNTRY I get the error. "The OLE DB provider "MSDAORA" for linked server "...." does not contain the table "COUNTRY". The table either does not exist or the current user does not have permissions on that table." The 'sp' user I am connecting is the owner of the table. What could be the problem ? Thanks a lot.
I have two table 'Cal_date' and 'RPT_Invoice_Shipped'.Table cal_data has column month_no, start_date and end_date. And table RPT_Invoice_Shipped has columns Day_No, Date, Div_code, Total_Invoiced, Shipped_Value, Line_Shipped, Unit_Shipped, Transaction_Date.
I am using below insert statment to insert data in RPT_Invoice_Shipped table.
insert into [Global_Report_Staging].[dbo].[RPT_Invoice_Shipped] (Day_No, Date, Div_code, Total_Invoiced, Transaction_Date) select , CONVERT(DATE,Getdate()) as Date, LTRIM(RTRIM(div_Code)), sum(tot_Net_Amt) as Total_Invoiced, (dateadd(day, -1, convert(date, getdate()))) from [Global_Report_Staging].[dbo].[STG_Shipped_Invoiced] WHERE CONVERT(DATE,Created_date )=CONVERT(DATE,Getdate()) group by div_code
while inserting in column Day_No in RPT_Invoice_Shipped table, I have to use formula (Transaction_Date-start_date+1) where Transaction_Date from STG_Shipped_Invoiced and start_date from Cal_date table. I was using datepart (mm, Transaction_Date) so it gives month_no, and this month_no we can join with month_no of Cal_date table and fetch start_date from Cal_date table, so that we can use start_date for formula (Transaction_Date-start_date+1).
But I am getting difficulty to arrange this in above query. how to achieve this?
hi i am running this program and its giving some problem while execution. When the program tries to create the table expt1..its says Msg 2714, Level 16, State 1 There is already an object named 'expt1' in the database.
and if i try to drop the table expt1 it says Msg 3701, Level 11, State 1 Cannot drop the table 'expt1', because it doesn't exist in the system catalogs.
How should I resolve this problem...? ==========================
AND DETAILTRANS.CONTRACT IS NOT NULL AND DETAILTRANS.CONTRACT!='N/A' AND DETAILTRANS.EXPREV='E' AND DETAILTRANS.PRELIMORFINAL='F' AND DETAILTRANS.postedDATE IS NULL ORDER BY DETAILTRANS.GMSKEy
I have a table in different databases with the same name. My goal is to compare the two tables, and insert a record into the second table where there is not a match in the first table. So far, my query looks like the following:
SELECT [metal] FROM [ProductionDatabase].[dbo].[Metalurgy] EXCEPT SELECT [metal] FROM [TestDatabase].[dbo].[Metalurgy]
This gives me a list of records from [Production].[dbo].[Metalurgy] which do not reside in [TestDatabase].[dbo].[Metalurgy]. Now, I need to use that list to insert missing records into [TestDatabase].[dbo].[Metalurgy]. How can I modify the above code to INSERT the missing records?
If TABLE2 has a data in resource 01-05 that isn't in resource01-05 of TABLE1 then I want to added it to the next free slot where ref is the unique key.
Error at Get Fenics data to table [Load into FFFenics table [155]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E37 Description: "Invalid object name 'dbo.FFFenics'.".
Error at Get Fenics data to table [Load into FFFenics table [155]]: Failed to open a fastload rowset for "[dbo].[FFFenics]". Check that the object exists in the database.
Error at Get Fenics data to table [DTS.Pipeline]: "component "Load into FFFenics table" (155)" failed validation and returned validation status "VS_ISBROKEN".
Error at Get Fenics data to table [DTS.Pipeline]: One or more component failed validation.
Error at Get Fenics data to table: There were errors during task validation.
I'm working on creating a new version of an existing table. I want to keep the old table around, only with a different name. In looking this up I found there's a system routine named sp_rename, which looks like it will work fine.However in thinking about this I realized that the foreign key constraints defined on the table (there's 3 of them) are likely to not be renamed, correct?
If I'm correct, then I suppose I could rename the table, then drop the 3 foreign key constraints, and create them new using different names for those foreign key constraints.
Is that possible to restrict inserting the record if record already exist in the table.
Scenario: query should be
We are inserting a bulk information of data, it should not insert the row if it already exist in the table. excluding that it should insert the other rows.
I'm trying to create a local copy of a popular CRM database calledSalesforce.com. Many of the tables in the DB have FOREIGN KEYreferences that I want to preserve, but I've run into a chicken and eggproblem. Table "A" has a reference to table "B," and table "B" has areference to table "A." So I can't CREATE one until the other exists.Is there a way to disable these checks until I've created all theschema?Here's what I see (error first, then SQL that caused it):Server: Msg 1767, Level 16, State 1, Line 1Foreign key 'FK__UserRole__LastMo__48CFD27E' references invalid table'User'.Server: Msg 1750, Level 16, State 1, Line 1Could not create constraint. See previous errors.CREATE TABLE salesforce3.dbo."UserRole" ("Id" varchar(18) PRIMARY KEY ,"Name" varchar(40), "ParentRoleId" varchar(18) REFERENCES"UserRole"(Id), "RollupDescription" varchar(80),"OpportunityAccessForAccountOwner" varchar(40),"CaseAccessForAccountOwner" varchar(40), "LastModifiedDate" datetime,"LastModifiedById" varchar(18) REFERENCES "User"(Id), "SystemModstamp"datetime);CREATE TABLE salesforce3.dbo."User" ("Id" varchar(18) PRIMARY KEY ,"Username" varchar(80), "LastName" varchar(80), "FirstName"varchar(40), "CompanyName" varchar(80), "Division" varchar(80),"Department" varchar(80), "Title" varchar(80), "Street" text, "City"varchar(40), "State" varchar(20), "PostalCode" varchar(20), "Country"varchar(40), "Email" varchar(80), "Phone" varchar(40), "Fax"varchar(40), "MobilePhone" varchar(40), "Alias" varchar(8), "IsActive"bit, "TimeZoneSidKey" varchar(40), "UserRoleId" varchar(18) REFERENCES"UserRole"(Id), "LocaleSidKey" varchar(40), "ReceivesInfoEmails" bit,"ReceivesAdminInfoEmails" bit, "EmailEncodingKey" varchar(40),"ProfileId" varchar(18) REFERENCES "Profile"(Id), "LanguageLocaleKey"varchar(40), "EmployeeNumber" varchar(20), "WirelessEmail" varchar(80),"LastLoginDate" datetime, "CreatedDate" datetime, "CreatedById"varchar(18) REFERENCES "User"(Id), "LastModifiedDate" datetime,"LastModifiedById" varchar(18) REFERENCES "User"(Id), "SystemModstamp"datetime, "UserPermissionsMarketingUser" bit,"UserPermissionsOfflineUser" bit, "UserPermissionsWirelessUser" bit,"UserPermissionsSuperCssUser" bit, "UserPermissionsAvantgoUser" bit);
I have a report that summarizes hospital readmissions. Some months may only have a female or male patient that is readmitted but, I want to show both months either way.
All- Supposing I have table_a and table_b. Table_a has fields FIRST_A and LAST_A for people's first and last names. Similarly, table_b has FIRST_B and LAST_B for people's first and last names.
How would I create a record in table_b for each record in table_a, such that for each added record, the values of FIRST_A is copied to FIRST_B and LAST_A is copied to LAST_B. (Table_b will have other fields that are left unfilled.)
I have table 'stores' that has 3 columns (storeid, article, doc), I have a second table 'allstores' that has 3 columns(storeid(always 'ALL'), article, doc). The stores table's storeid column will have a stores id, then will have multiple articles, and docs. The 'allstores' table will have 'all' in the store for every article and doc combination. This table is like the master lookup table for all possible article and doc combinations. The 'stores' table will have the actual article and doc per storeid.
What I am wanting to pull is all article, doc combinations that exist in the 'allstores' table, but do not exist in the 'stores' table, per storeid. So if the article/doc combination exists in the 'allstores' table and in the 'stores' table for storeid of 50 does not use that combination, but store 51 does, I want the output of storeid 50, and what combination does not exist for that storeid. I will try this example:
'allstores' 'Stores' storeid doc article storeid doc article ALL 0010 001 101 0010 001 ALL 0010 002 101 0010 002 ALL 0011 001 102 0011 002 ALL 0011 002
So I want the query to pull the one from 'allstores' that does not exist in 'stores' which in this case would the 3rd record "ALL 0011 001".
I created a simple SSIS package that takes a Flat File Source (CSV file) and Imports it into a OLE DB Destination ([TestCSVImport].dbo.Table1). I have other CSV files I'd like to import, but I don't want to import entries where column "ordereID" (PK) are the equal. Just want to import the new data found in the CSV files. I tried adding a Lookup in-between the Flat File Source and the OLE DB Destination, but I'm not sure how to accomplish only importing new data.
I wanted to know if it is possible to run a stored proc (report) when a new record is inserted / updated into a certain table. Also if it could do so for records with a column that meet a certain criteria ie. sell description like '%test%'
Greeting All, Again I stuck from foxpro into sql. could use some help.
I have 2 tables, Contact and Service. In the contact table I have an ID number that I would to insert into the Service table based on the Service table user name.
I cant use a Foxpro replace all command with some function attached to the script. I cant seem to find a SQL version of what I would like to do.
So here is my layout. If someone might be able to point me in a direction, I would be greatful
Contact Table "grid is the auto id field" grid, Anumber, Name, Address
Service Table grid, Anumber, Name, Address
service.name = contact.name add 'anumber' from contact table to service table where service.name lives.
I will keep looking on my own. any help would be great Thanx..
In SQL SERVER 2005, how can I get the ID of the record I just insert to table? I defined a table MyTable, and I insert a record into the table using the SQL below Insert into MyTable (Name) values ("User Name") You know the field ID is IDENTITY, so it can not be in Insert SQL, and SQL SERVER will pass a value to it automatically.How can I know the ID of the record I just insert to table?
CREATE TABLE [dbo].[MyTable]( [ID] [int] IDENTITY(1,1) NOT NULL, [Name] [nchar](10) NOT NULL,CONSTRAINT [PK_MyTable] PRIMARY KEY CLUSTERED ( [ID] ASC)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]) ON [PRIMARY]
Anyone know if there is method that can insert all record from a tablein an MS Access 2000 database to a table in MS SQL Server 2000database by a SQL statement? (Therefore, I can execute the statementin my program)--Posted via http://dbforums.com
I would like to find out how to capture record count for a table in oracle using SSIS and then writing that value in a SQL Server table.
I understand that I can use a variable to accomplish this task. Well first issue I run into is that what import statement do I need to use in the design script section of Script Task. I see that in many examples following statement is used for SQL Server databases:
Imports System.Data.SqlClient
Which Import statement I need to use to for Oracle database. I am using a OLE DB Connection.
why my insert or into is not working in my SQL Server R2 2008. I have a code I am using on an existing table and trying to put the data in a brand new table but it keeps giving me an error
select mCid, caucasian, aa, api, aian, mr, his, max(val) into memberrand from MEMBERV2_RAND cross apply ( select AA union all select API union all select AIAN union all select MR union all select HIS union all select CAUCASIAN ) v(val)
group by mCid, AA, API, AIAN, MR, HIS, caucasian ;
The error is: Msg 1038, Level 15, State 5, Line 1..An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.Do I have to actually create this table with no values first and then run the query? I was hoping this was sort of a make a table query
I saved the result into a csv file and then truncated the table. Now, I am trying to bulk insert the data into the table. So I used:
bulk insert rdb.dbo.scd_event_tab from 'C:userssluintel.ctrdesktopeventtab.csv' with ( codepage = 'RAW', datafiletype = 'native', fieldterminator = ' ', keepidentity, keepnulls ); go
However, I get this error:
Msg 4867, Level 16, State 1, Line 1 Bulk load data conversion error (overflow) for row 1, column 1 (JOB_ID). Msg 4866, Level 16, State 5, Line 1
The bulk load failed. The column is too long in the data file for row 1, column 3. Verify that the field terminator and row terminator are specified correctly.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
Previously same records exists in table having primary key and table having foreign key . we have faced 7 records were lost from primary key table but same record exists in foreign key table.
I created am inventory table with few columns say, Servername, version, patching details, etc
I want a tracking of the table.
Let's say people are asked to modify the base table and I want a complete capture of the details modified and the session of the user ( ) who (system_user) is actually modifying the details.
I am trying to insert bulk data into main table from staging table in sql server 2012. If any error comes, this total activity is rollbacked. I don't want that to happen. I want to know the records where ever the problem persists, and the rest has to be inserted.
i need to write a query that insert in A table if and only if the row does not exist already in the table (the source is a select statement). i tried the following:
insert into [A] select * from [B] where Not EXISTS (select * from [A])
table [A] is still empty, but it does not insert any thing! .. what i know is that the EXIST checks if the selected row exists in the subquery, ain't ?
