SQL Errors List.

Jan 29, 1999

Hi guys.
Please help me.
Where can I find the list of all SQL errors with discriptions of them.

Alona F.

View 1 Replies


ADVERTISEMENT

Separate Email List For Errors

Apr 4, 2008

Hello All,
I have an email subscription set up in Report Manager. Sometimes, when report execution fails, is there a way to sent the failure notification to a separate email list? Something like:
on errror, send to abc@abc.com
on success send to xyz@xyz.com?

Thanks
Phewa

View 1 Replies View Related

IS There A Way To Store List Of Errors In Text File

Apr 4, 2007

I want to attach a error list to my email task and i want my email task to send email only if there is an error...IS this possible..

View 8 Replies View Related

SQL Server 2008 :: How To Make Sproc Return Errors For Underlying Table Errors

Jul 1, 2015

I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.

The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?

View 1 Replies View Related

Parent Package Reports Failure On Errors, But No Errors In Log

Jul 31, 2006

I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.

It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.

If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?

Thanks,

Lee

View 5 Replies View Related

How To Solve 0 Allocation Errors And 1 Consistency Errors In

Apr 20, 2006

Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG
I reveived the following error.
how to solve it?



Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507).
. . . .
. . . .


CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736).
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).

. . . .
. . . .

Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875).
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"

View 1 Replies View Related

SQL 2012 :: List All Different Values That Go With Single CAS ID To Appear As Comma Separate List

Jun 15, 2015

So at the moment, I don't have a function by the name CONCATENATE. What I like to do is to list all those different values that go with a single CASE_ID to appear as a a comma separate list. You might have a better way of doing without even writing a function

So the output would look like :

CASE_ID VARIABLE
=====================
1 [ABC],[HDR],[GHHHHH]
2 [ABCSS],[CCHDR],[XXGHHVVVHHH],[KKKJU],[KLK]

SELECT
preop.Case_ID,
dbo.Concatenate( '[' + CAST(preop.value_text AS VARCHAR) + ']' ) as variable
FROM
dbo.TBL_Preop preop
WHERE
preop.Deleted_CD = 0

GROUP BY
preop.Case_ID

View 8 Replies View Related

Report Designer: Need To List Fields From Multiple Result Rows As Comma Seperated List (like A JOIN On Parameters)

Apr 9, 2008



I know I can do a JOIN(parameter, "some seperator") and it will build me a list/string of all the values in the multiselect parameter.

However, I want to do the same thing with all the occurances of a field in my result set (each row being an occurance).

For example say I have a form that is being printed which will pull in all the medications a patient is currently listed as having perscriptions for. I want to return all those values (say 8) and display them on a single line (or wrap onto additional lines as needed).

Something like:
List of current perscriptions: Allegra, Allegra-D, Clariton, Nasalcort, Sudafed, Zantac


How can I accomplish this?

I was playing with the list box, but that only lets me repeat on a new line, I couldn't find any way to get it to repeate side by side (repeat left to right instead of top to bottom). I played with the orientation options, but that really just lets me adjust how multiple columns are displayed as best I can tell.

Could a custom function of some sort be written to take all the values and spit them out one by one into a comma seperated string?

View 21 Replies View Related

Insert Value List Doest Not Match Column List

Apr 18, 2007

HI...



I need to do a simple task but it's difficult to a newbie on ssis..



i have two tables...



first one has an identity column and the second has fk to the first...



to each dataset row i need to do an insert on the first table, get the @@Identity and insert it on the second table !!



i'm trying to use ole db command but it's not working...it's showing the error "Insert Value list doest not match column list"



here is the script



INSERT INTO Address(
CepID,
Street,
Number,
Location,
Complement,
Reference)Values
(
?,
?,
?,
?,
?,
?
)
INSERT INTO CustomerAddress(
AddressID,
CustomerID,
AddressTypeID,
TypeDescription) VALUES(
@@Identity,
?,
?,
?
)



what's the problem ??

View 7 Replies View Related

Items In List A That Don't Appear In List B (was Simple Query...I Think)

Jan 20, 2005

Ok, I want to write a stored procedure / query that says the following:
Code:
If any of the items in list 'A' also appear in list 'B' --return false
If none of the items in list 'A' appear in list 'B' --return true


In pseudo-SQL, I want to write a clause like this

Code:

IF
(SELECT values FROM tableA) IN(SELECT values FROM tableB)
Return False
ELSE
Return True


Unfortunately, it seems I can't do that unless my subquery before the 'IN' statement returns only one value. Needless to say, it returns a number of values.

I may have to achieve this with some kind of logical loop but I don't know how to do that.

Can anyone help?

View 3 Replies View Related

Select List Contains More Items Than Insert List

Mar 21, 2008

I have a select list of fields that I need to select to get the results I need, however, I would like to insert only a chosen few of these fields into a table. I am getting the error, "The select list for the INSERT statement contains more items than the insert list. The number of SELECT values must match the number of INSERT columns."
How can I do this?

Insert Query:
insert into tsi_payments (PPID, PTICKETNUM, PLINENUM, PAMOUNT, PPATPAY, PDEPOSITDATE, PENTRYDATE, PHCPCCODE)
SELECT DISTINCT
tri_IDENT.IDA AS PPID,
tri_Ldg_Tran.CLM_ID AS PTicketNum,
tri_ClaimChg.Line_No AS PLineNum,
tri_Ldg_Tran.Tran_Amount AS PAmount,

CASE WHEN tln_PaymentTypeMappings.PTMMarsPaymentTypeCode = 'PATPMT'
THEN tri_ldg_tran.tran_amount * tln_PaymentTypeMappings.PTMMultiplier
ELSE 0 END AS PPatPay,

tri_Ldg_Tran.Create_Date AS PDepositDate,
tri_Ldg_Tran.Tran_Date AS PEntryDate,
tri_ClaimChg.Hsp_Code AS PHCPCCode,
tri_Ldg_Tran.Adj_Type,
tri_Ldg_Tran.PRS_ID,
tri_Ldg_Tran.Create_Time,
tri_Ldg_Tran.Adj_Group,
tri_Ldg_Tran.Payer_ID,
tri_Ldg_Tran.TRN_ID,
tri_ClaimChg.Primary_Claim,
tri_IDENT.Version
FROM [AO2AO2].MARS_SYS.DBO.tln_PaymentTypeMappings tln_PaymentTypeMappings RIGHT OUTER JOIN
qs_new_pmt_type ON tln_PaymentTypeMappings.PTMClientPaymentDesc =
qs_new_pmt_type.New_Pmt_Type RIGHT OUTER JOIN
tri_Ldg_Tran RIGHT OUTER JOIN
tri_IDENT LEFT OUTER JOIN
tri_ClaimChg ON tri_IDENT.Pat_Id1 =
tri_ClaimChg.Pat_ID1 ON tri_Ldg_Tran.PRS_ID =
tri_ClaimChg.PRS_ID AND
tri_Ldg_Tran.Chg_TRN_ID =
tri_ClaimChg.Chg_TRN_ID
AND tri_Ldg_Tran.Pat_ID1 = tri_IDENT.Pat_Id1 LEFT OUTER JOIN
tri_Payer ON tri_Ldg_Tran.Payer_ID
= tri_Payer.Payer_ID ON qs_new_pmt_type.Pay_Type
= tri_Ldg_Tran.Pay_Type AND
qs_new_pmt_type.Tran_Type = tri_Ldg_Tran.Tran_Type
WHERE (tln_PaymentTypeMappings.PTMMarsPaymentTypeCode <> N'Chg')
AND (tln_PaymentTypeMappings.PTMClientCode = 'SR')
AND (tri_ClaimChg.Primary_Claim = 1)
AND (tri_IDENT.Version = 0)

View 2 Replies View Related

Insert Only New Items From A List But Get ID's For New And Existing In The List.

Feb 12, 2008

Hi,

I have a a table that holds a list of words, I am trying to add to the list, however I only want to add new words. But I wish to return from my proc the list of words with ID, whether it is new or old.

Here's a script. the creates the table,indexes, function and the storeproc. call the proc like procStoreAndUpdateTokenList 'word1,word2,word3'

My table is now 500000 rows and growing and I am inserting on average 300 words, some new some old.

performance is a not that great so I'm thinking that my code can be improved.

SQL Express 2005 SP2
Windows Server 2003
1GB Ram....(I know, I know)

TIA





Code Snippet
GO
CREATE TABLE [dbo].[Tokens](
[TokenID] [int] IDENTITY(1,1) NOT NULL,
[Token] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
CONSTRAINT [PK_Tokens] PRIMARY KEY CLUSTERED
(
[TokenID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO

CREATE UNIQUE NONCLUSTERED INDEX [IX_Tokens] ON [dbo].[Tokens]
(
[Token] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = ON, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
CREATE FUNCTION [dbo].[SplitTokenList]
(
@TokenList varchar(max)
)
RETURNS
@ParsedList table
(
Token varchar(255)
)
AS
BEGIN
DECLARE @Token varchar(50), @Pos int
SET @TokenList = LTRIM(RTRIM(@TokenList ))+ ','
SET @Pos = CHARINDEX(',', @TokenList , 1)
IF REPLACE(@TokenList , ',', '') <> ''
BEGIN
WHILE @Pos > 0
BEGIN
SET @Token = LTRIM(RTRIM(LEFT(@TokenList, @Pos - 1)))
IF @Token <> ''
BEGIN
INSERT INTO @ParsedList (Token)
VALUES (@Token) --Use Appropriate conversion
END
SET @TokenList = RIGHT(@TokenList, LEN(@TokenList) - @Pos)
SET @Pos = CHARINDEX(',', @TokenList, 1)
END
END
RETURN
END
GO

CREATE PROCEDURE [dbo].[procStoreAndUpdateTokenList]
@TokenList varchar(max)
AS
BEGIN
SET NOCOUNT ON;
create table #Tokens (TokenID int default 0, Token varchar(50))
create clustered index Tind on #T (Token)
DECLARE @NewTokens table
(
TokenID int default 0,
Token varchar(50)
)

--Split ID's into a table
INSERT INTO #Tokens(Token)
SELECT Token FROM SplitTokenList(@TokenList)
BEGIN TRY
BEGIN TRANSACTION
--get ID's for any existing tokens
UPDATE #Tokens SET TokenID = ISNULL( t.TokenID ,0)
FROM #Tokens tl INNER JOIN Tokens t ON tl.Token = t.Token

INSERT INTO Tokens(Token)
OUTPUT INSERTED.TokenID, INSERTED.Token INTO @NewTokens
SELECT DISTINCT Token FROM #Tokens WHERE TokenID = 0

return the list with id for new and old
SELECT TokenID, Token FROM #Tokens
WHERE TokenID <> 0
UNION
SELECT TokenID, Token FROM @Tokens
COMMIT TRANSACTION
END TRY
BEGIN CATCH
DECLARE @er nvarchar(max)
SET @er = ERROR_MESSAGE();
RAISERROR(@er, 14,1);
ROLLBACK TRAN
END CATCH;
END
GO




View 5 Replies View Related

ERROR: A Variable May Only Be Added Once To Either The Read Lock List Or The Write Lock List.

May 22, 2006

Hi,
I have set of 2 DTS packages, one of which calls the other by forming a command-line (dtexec) using a Execute Process task.

From the parent package-> Execute Process Task->
dtsexec /F etc... /<pkg variable> = "servername"

Each of the parent and the called package have a variable: "User::DWServerSQLInstance" which is mapped to the SQL server connection manager server name property using an expression. The outer package has the above variable and so does the inner called package (which gets assigned through the command line from the outerpackage call to inner)

I "sometimes" get the following error:

OnError,I4,TESTDOMAdministrator,ACDWAggregation,{A1F8E43F-15F1-4685-8C18-6866AB31E62B},{77B2F3C7-6756-46EB-8C01-D880598FB4B3},5/22/2006 5:10:28 PM,5/22/2006 5:10:28 PM,-1073659822,0x,The variable "User::DWServerSQLInstance" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.

Help would be appreciated!

I have seen other posts on this but, not able to relate the solution to my scenario.

View 9 Replies View Related

A Variable May Only Be Added Once To Either The Read Lock List Or The Write Lock List

May 10, 2006

Hi All,



I have seen a few other people have this error.

Package works fine when run from BIDS, DTExec, dtexecui. When I schedule it, It get these random errors. (See below)

The main culprit is a variable called "RecordsetFileDIR" which is set using an expression. (@[User::_ROOT] + "RecordSets\")

A number of other variables use this as part of their expression and as they all fail, pretty much everything dies.

I have installed SP1 (Not Beta) on server. Package uses config files to set the value of _ROOT.



The error does not always seem to be with this particular variable though. Always a variable that uses an expression but errors are random. Also, It will run 3 out of 10 times without a problem. I am the only person on the server at the time.

Any ideas?



Cheers,

Crispin



Error log:

OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073659822,0x,The variable "User::RecordsetFileDIR" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.

OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073639420,0x,The expression for variable "rsHeaderFile" failed evaluation. There was an error in the expression.

OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.

OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.

OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.

OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.

OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.

OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.

OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.

OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.

OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".

OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".

OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".

OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".

View 1 Replies View Related

SELECT WHERE (any Value In Comma Delimited List) IN (comma Delimited List)

Jul 2, 2005

I want to allow visitors to filter a list of events to show only those belonging to categories selected from a checklist.

Here is an approach I am trying:

TABLE Events(EventID int, Categories varchar(200))

EventID Catetories
--------------------------
1           ‘6,8,9’
2           ‘2,3’

PROCEDURE ListFilteredEvents
   @FilterList varchar(200)    -- contains ‘3,5’
AS
SELECT EventID FROM Events
WHERE (any value in Categories) IN @FilterList

Result:

EventID
----------
2

How can I select all records where any value in the Categories column
matches a value in @FilterList. In this example, record 2 would be
selected since it belongs to category 3, which is also in @FilterList.

I’ve looked at the table of numbers approach, which works when
selecting records where a column value is in the parameter list, but I
can’t see how to make this work when the column itself also contains a
comma delimited list.

Can someone suggest an approach?

Any examples would be greatly appreciated!
Gary

View 3 Replies View Related

BCP Errors

Feb 25, 2000

When using the following format & .cmd file keep getting this error . . .

DB-LIBRARY error:
Unexpected EOF encountered in BCP data-file.

Have checked the .fmt & .cmd files & also the table layout that the data is being loaded into. Any help would be appreciated.


FMT File

6.0
28
1 SQLCHAR 0 30 "" 1 UserName
2 SQLCHAR 0 32 "" 2 Password
3 SQLCHAR 0 8 "" 3 PasswordExpirationDate
4 SQLCHAR 0 2 "" 4 HintQuestionID
5SQLCHAR 0 25 "" 5HintAnswer
6SQLCHAR 0 40 "" 6EmailAddress
7 SQLCHAR 0 1 "" 7MarketingEmailInd
8 SQLCHAR 0 1 "" 8 StatusEmailInd
9 SQLCHAR 0 30 "" 9 FirstName
10 SQLCHAR 0 30 "" 10 LastName
11 SQLCHAR 0 1 "" 11MiddleInitial
12 SQLCHAR 0 3 "" 12 Suffix
13SQLCHAR 0 9 "" 13SSN
14SQLCHAR 0 8 "" 14DOB
15SQLCHAR 0 1 "" 15 CustType
16SQLCHAR 0 1 "" 16GradeLevel
17SQLCHAR 0 1 "" 17 SharedComputerInd
18SQLCHAR 0 8 "" 18 SchoolCode
19 SQLCHAR 0 2 "" 19CampusCode
20 SQLCHAR 0 50 "" 20 SchoolName
21 SQLCHAR 0 8 "" 21 SchoolLastVerfiedDate
22 SQLCHAR 0 8 "" 22 DateCreated
23 SQLCHAR 0 8 "" 23 LastLoginDate
24 SQLCHAR 0 4 "" 24 LoginCount
25 SQLCHAR 0 4 "" 25 BadLoginCount
26 SQLCHAR 0 1 "" 26 Status
27 SQLCHAR 0 30 "" 27 LastModifiedUser
28 SQLCHAR 0 8 ";
" 28 LastModifiedDate

CMD File

BCP DEVL_CUSTOMER_DB..tblRegistered_Users_TempX in T:custbasedataincomingRegistered_User.txt /f T:custbaseapplsqlcpbuser.fmt /e T:custbasedata
eportsbuseri.err /o T:custbasedata
eportsbuseri.out /b 1000 /SDataserverjmk /User /Password

View 4 Replies View Related

644 Errors

Jul 23, 1999

I have been receiving 644 errors on an index for one of my tables. We have dropped and rebuilt the index. Even BCP out, drop the table, create the table and BCP in everything and still have problems.

Has anyone else experienced problems with 644 errors? Did you ever determine the cause and are they any preventative ideas?

TIA

View 2 Replies View Related

Job Errors

May 24, 2005

I get this error when i try to modify or fix a job

Cannot add, update, or delete a job(or ists steps or shcedules) that aoriginated from an MSX Server.

error 14274

Why is this? Any ideas. I checked the sysjobs in the msdb and they have the correct server name for the jobs?

View 2 Replies View Related

Errors When Trying To Run SQL

May 11, 2004

Ok, whenever I try to connect, I get the following Error messages:

"SQL Server Registration failed because of the connection failure displayed below.
SQL Server does not exist or access denied.
ConnectionOpen (Connect())"

"An Error 1069 occured while performing this service operation on the
MSSQLServer Service"

I even went as far as uninstalling and reinstalling, but to no avail. Does anyone have an idea what's causing this? It was working fine and then all the sudden one day I start getting these messages and it won't work.

Thanks!
Smitty

View 6 Replies View Related

More Db Errors

May 5, 2008

I have a dynamics db that is used for archival purposes and it is not used very often. Now that someone decided to get some info out of it it wont let them. when I run dbcc I get the following message:

Msg 5242, Level 16, State 1, Line 1
An inconsistency was detected during an internal operation in database 'PACIF'(ID:12) on page (1:19451). Please contact technical support. Reference number 6.
Msg 8921, Level 16, State 1, Line 1
Check terminated. A failure was detected while collecting facts. Possibly tempdb out of space or a system table is inconsistent. Check previous errors.

I was just wondering if this meant anything to any of you? and since all of my backtapes have the same issue, is there any way to fix it?

thanks in advance.

View 11 Replies View Related

My Errors Are.

Jun 5, 2007

Failer to generate user instance is the error.

View 1 Replies View Related

WMI Errors

Jan 21, 2008



Running SQL 05 Standard on a Vista box and I have about had it with Vista. Anytime I try to launch Config Manager I get Cannot connect to WMI provider. You do not have permission or the server is unreachable. So try I googled and tried everything I can fine from http://blogs.msdn.com/echarran/archive/2006/01/03/509061.aspx


C:Program FilesMicrosoft SQL Server90Shared>mofcomp "C:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof" and now I get ..

An error occurred while processing item 10 defined on lines 73 - 79 in file C:s

qlmgmproviderxpsp2up.mof:

Error Number: 0x80041003, Facility: WMI

Description: Access denied

Compiler returned error 0x80041001


so I try every possible different permission setting for anything sql server - problem still happening... try procmonitor.. find the registry keys and grant full contorl to all of them.. problem still happending.. run the little fixwmi.cmd I found.. problem still happening..

try to uninstall SQL Server.. NOT - WMI error - try to reinstall over--- NOT WMI error.

What do I need to do to get this working. .this is becoming a serious hinderance to my productivity!!!

View 15 Replies View Related

Errors To Log

Jun 11, 2007



what a want to know is if there s a way to log sql server errors on a log file, table, these errors are not sql server logs which already exists, i want to log dead locks, sql server timeout errors vs on sql server or somewhere.

is it possible ?

may i use sql server profiler for that purpose?

thx in advance..

View 1 Replies View Related

Parameter Errors HELP???

Jul 13, 2006

Hi Expert,
I have a datagrid which is filtering by a dropdownlist and a search textbox.

The dropdownlist allows to select the column they want to search.
The search textbox allows to enter the item they want based on the selection from dropdown.
Now I use a StoreProcedure to select the data they need, so I pass-in @DropDownListValue int and some others parameters, such as @ID int, @OrderType varchar(50) ... When I search for ID = 163
Input string was not in a correct format.
Then when I check with the SQL Server Profiler, I found out that:
exec usp_SelectOrder@DropDownListValue=N'1',@ID=N'163',@OrderType=N'163',@OrderSeries=N'163' ...
I already set every parameter's default value to NULL. How can I solve for this? Thanks!!

View 1 Replies View Related

Why Is This Trying Errors, (SQL Inserting)

Sep 18, 2007

Why on earth is this not working,  It WILL insert if there are NO apostheres (" ' "), but if I say like, "Cedric's Group" It will error out.  I thought this approach was suppose to handle this character?
Thanks for any insight, String sqlStr = "Insert into cardgroups (username,groupname,insertdt,groupid) values (@username,@groupname,@insertdt,@groupid)";

SqlCommand cmd = new SqlCommand(sqlStr, connect);

cmd.Parameters.AddWithValue("@username", Session["memberusername"].ToString());

cmd.Parameters.AddWithValue("@groupname",this.namebox.Text.ToString());

cmd.Parameters.AddWithValue("@insertdt", DateTime.Now.ToString());

cmd.Parameters.AddWithValue("@groupid", myGroupStr);

connect.Open();

cmd.ExecuteNonQuery();

connect.Close();
 

View 2 Replies View Related

Im Trying To Run A Application And Getting Following Errors

Nov 17, 2007

Imports System.Data.SqlClientImports System.DataImports Microsoft.SqlServerPartial Class _Default    Inherits System.Web.UI.Page    Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click    End Sub    Protected Sub TextBox3_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles TextBox3.TextChanged    End Sub    Protected Sub SqlDataSource1_Selecting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceSelectingEventArgs) Handles SqlDataSource1.Selecting    End Sub    Protected Sub Save_Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Save_Button1.Click        Dim conn As New SqlConnection()        conn.ConnectionString = Data Source=REDSTONE;Persist Security Info=True;User ID=******;Password=******;Unicode=True    End SubEnd Class
 
End of statement expected.    C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb
'System.Data' is a namespace and cannot be used as an expression.    C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb
C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb 

View 1 Replies View Related

Handling Errors...

Mar 25, 2006

Hello to all,
On my webPage I have Used one SQLDataSource to access DataBase. Now whenever some error occures it shows error page by default. I am not able to catch Errors and tackle in my way...
Furthermore in this new structure of accessing DataBase even I do not know where to write Try... Catch...

View 1 Replies View Related

Errors When When Upgrading To SQL 7 Sp3

Apr 30, 2002

Hi,

Well there's always a first for everything!! I have a SQL 7.0 server on sP1
and ran upgrade to sp3 and recieved error 'error in upgrade script' retry or cancel. When I retried the upgrade ended. I tried to run the upgrade again and it tries continue where it ended before, but the upgrade ends unsucessfully. I even tried extracted the sp3 exe to a diffrent folder and ran the sp3 upgrade with same results.

I started the MSSQL service ok but not able to use Query Analyzer, DTS, EM.

Get the following message:ISQL.EXE - Entry Point not found. The procedure entry point?DeleteRow@CDataCTLStorage@@UAEJJPAPAG@Z could not be located in the dynamic link library SQLGUI.dll

I get similar msgs when trying to open DTS, Enterprise manager from the server. The user databases and appear to be ok. I am able to get to Query Analyzer, etc. from my worksation fine.

Has anyone encountered this before? Is there a fix for it or do I need to rebuild the server from SP1 and restore the databases, etc.??

Thanks Much,
Steve Bajada
Senior DBA

View 3 Replies View Related

SQL Server 7-Errors

May 29, 2002

It gives following errors
1.time out
2.general network failure


* Are these due to large number of online connnections
*If so what is the maximum number of connections possible
*what is the hardware requirement to avoid this
*what is the impact on stored procedures
*How to tune the server to overcome the problems
*I'm currently using the standard edition what is the impact on enterprise edition

View 1 Replies View Related

Consistency Errors

Jun 1, 2001

Hi,

Over the last few weeks we've been having problems with a particular table in our live OLTP database - dbcc checkdb has been reporting consistency errors.

Initially i took the db offline and fixed the errors using checkdb and replacing the deleted records from a backup of the table. After some investigation it appeared that the errors were being caused when the unique clustered index on the table was rebuilt during weekend maintenance. After a lot of testing i was sure this was the case - so i just deleted the index (the table is small and was over-indexed anyway) and the errors stopped occurring. I didn't understand why the errors had occurred in the first place, and i wasn't convinced that the index was the real problem, but the errors had gone - so that was ok for the short term.

A few things still bugged me:

1. For audit purposes we maintain a copy of the table in question (populated via triggers on the live table) and this showed up consistency errors too. This led me to suspect the problem was with the data itself or the structure of the table - unfortunately there's nothing remarkable about this small, rarely updated table at all (apart from the fact that it's vital for our business!).

2. Any database built from backups of the live db consistently report errors now despite the fact that the backups were made after the problem was resolved and when dbcc checkdb reported NO errors (I maintain a number of test and olap databases in this way). What's happening here? (My guess is that the backup and restore process involves rebuilding indexes, rearranging data, etc. and this is resurrecting the problem) I couldn't help feeling that despite having apparently fixed the errors they were still lurking out there somewhere....

3. At no point did the data in the table appear to be corrupt in any way from the user perspective. This provokes two questions - is dbcc checkdb reliable at both reporting and fixing errors, and how serious are consistency errors?

After removing the suspect index everything was fine for a few weeks until this morning - when errors were again reported on the same table. After hours spent testing and playing around with this (dropping indexes, dropping or truncating the table and re-populating from ascii files, etc.) i've now hit a brick wall. I still suspect the problem is related to the data itself or the structure of the table but can't get any further.....so..

Has anyone come up against a similar problem?
Any suggestions for the next course of action?
Can anyone point me to documentation on checkdb or consistency errors (other than what's in BOL or the MS knowledge base)?


thanks,
d.

View 5 Replies View Related

Snmp Errors

Oct 16, 2001

I am getting the error: The Procedure entry point snmpsvcgetenterpriseoid could not be located in the dynamic link library snmpapi.dll at start up of my nt4 sql server box. The only thought to that is that I need to reinstall SNMP. But I cant find the SNMP Agent anyware for me to reinstall. If you have ever seen this and have a better idea of how to fix it or if you know were i can find the agent it would be gretly apreciated.

Regards

SeTi{Ni}

View 2 Replies View Related

CmdExec Errors!

Oct 1, 2001

I have tried to make a DTS task running a batc-file on the same server as the SQL program is running using the CmdExec command.

My Command is as follows:

CmdExec serverpathatchname.bat

The problem is that everytime the step runs it report the following error:

"The system cannot find the file specified."

In the bat file I am also trying the de-map/map a network drive with another loginname/password than the one used on the SQL-server -> is this i problem?

Hope to hear from you soon, this is a bit urgent!!

Please provide tips to this adresse: qtip@bigfoot.com

View 1 Replies View Related

FTP Replication Errors

Jun 1, 2000

I'm running SQL 7.0 with SP2 applied. I have a database that I'm trying to replicate over the Internet.

I'm having a problem getting the initial snapshot. The total amount of data in the snapshot is 3GB. One .bcp file is 2GB and another is roughly 900MB. There are also a few smaller files.

I have my publisher and distributor setup correctly as well as my subscription. I have tested with smaller datasets. Near as I can tell, there is a problem with my files being too big. I get all the .sch files. The first .bcp file is the 2GB file.

I have tried replicating to another server on my LAN (100base-T) and get the same error.

I don't have the exact error, but it's something like:
'Failed to get file sql01_data1_data120000601105138igfile.bcp'

In my FTP Log, I see that transfer was started then aborted.

Any help on how to deliver large amounts of data over FTP would be greatly appreciated.

Thank you,
Charles

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved