I created a query with: Between [Forms]![Dummy]![StartDate:] And [Forms]![Dummy]![EndDate:] in it.
I created a Form with two text boxes named StartDate and EndDate and appropriate labels and buttons.
I then Created a Report, which prompts for dates and finds the data between the given Dates correctly.
Now the problem: When I create a text box in the report of the following form, I get ?Name? error on the Report: =[Forms]![Form Name]![StartDate] This should work?
Can you help me solve this last problem and acheive a good working program?
Is there a way to show the earliest and latest dates of a report generated by a non-date field?
E.g. I generate a report based on Food, and it'll list the days that this food is associated with. Is there a way to show the first and last day that appears in this report (i.e. the range of dates that the report shows based on the food selected)
I have a report that I want to pint the beginning date and ending date range that the report was based off of. I have a query that prompts for begining date and ending date
I have created my report for a table and how I want it to look. The problem is when I enter my dates the report pulls however at the top of the page the range of dates just says #name rather than the dates I entered. I used sample information from a database access creates to make my report and the dates not showing up are the only issue so far. I entered sample orders into my table. The dates to enter into the date range would be 11/01/01 through 11/30/01. I have attached this sample, can someone help me with what i am doing wrong please. I'm just not sure, I have been having a lot of problems creating this database.
I'm having issues with reports. What I want to do is only print specific dates in a report. I have read and tried everything to accomplish this but it just isn't working. Any suggestions????????????
I am using a simple " >= [BeginDate:] and <= [EndDate:]" in the criterion section of a query to allow a date range to be selected in the query which is used in a report. How can i get that [BeginDate:] and [EndDate:] info available to print on the report so it shows the actual date range being displayed in the report ? thanks.
Can anyone tell me if it is possible to input just one date range into a report that is accessing data from multiple table and multiple queries. I can create the report which gives me the info needed but I have to put the same date range in 3 or 4 time before the report is generated.
I'm trying to make a form where the final user can type in two dates (date range) and the result will generate a report on all activity between those two dates, any ideas ?
I have a database with several clients who have a series of appointments. I want to be able to create a report of all the clients to be seen during a range of dates to be inputted by the user. All help would be greatly appreciated.
I have operators that enter equipment downtime information into the database. I need to create a report that pulls all records that have a start date and time based on a start date (field name FromDate on form) at 7:00 AM to an end date (field name ToDate on form) at 6:59 AM and shows the total duration in hours for each record.I'm having difficulty getting my query to display the correct results for the date and time range. Duration calculations work perfectly.Here is my main table only using fields pertinent to this post:
Field Name Data Type Description Exception_Number AutoNumber Primary Key ExceptStartDate Date/Time Start Date formatted as Short Date ExceptStartTime Date/Time Start Time formatted as Medium Time ExceptEndDate Date/Time End Date formatted as Short Date ExceptEndTime Date/Time End Time formatted as Medium Time
The data the query pulls is employee name, course ID, course name and course completed date. I have added criteria in the query that asks for the Course ID to filter on a given course and a dynamic field in the query AnnualReqDate: DateAdd("d",+365,[TrainingCourseCompleted]). What this returns is a list of employees that have completed course X the date they completed and the date (12 months) when the course is due. This works great, have created a report that reflects this very well.
The issue comes in when I try to add the ability to filter by date range on the AnnualReqDate dynamic field. the AnnualReqDate dynamic field does not exist until the query is run the Between [Start Date] And [End Date] criteria add to the AnnualReqDate dynamic field wont work.The query fires off but returns zero records.
I have a report, based on a query, where the field name is "Date of Work". The criteria in this query field is >=[Start Date] And <=[End Date], which works fine. However I need to have the start and end dates to show in the resulting report header based on the query.
What I have is a single table that I need to create a report from. It has vehicle unit numbers, dates of service, repair details and costs. I am trying to generate a report where I can select a unit from a combobox and enter a date range.
I have the following project that works as a timesheet manager:
Users enter in a form the employee name/date/hours worked/role/overtime (yes or no)/rate... on a daily basis. At the end of every week, they must create a report depending on the dates given in a query.
I have only one table (tbl_EmployeeHours) and a query to calculate the number of hours between two dates.
At the moment a report gives me all the information above (employee name/date hours worked etc..) but what I am trying to is a bit different.
I need Access to create a report (based on a date range given by the user) that would give me: per unique name, the number of normal hours worked in total, next column, the number of hours worked as overtime (rate 1.5), then, the number of hours worked as overtime (rate 2).
This means there are 3 different totals. For example, in the date range given, someone might appear twice but in the report he will appear only once with 3 different totals...
My guess:
I would say I need to create a different query for the 3 different totals (normal hours, overtime 1.5 and overtime 2). For each query you would need to ask the user to input the date range (which would not be so user-friendly I agree...). Then, I am not sure how access would create that list of names and combine the 3 different results from the queries...?
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code: Between [StartDate:] And [EndDate:]
And
Code: Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
I have some code that filters job raised I have 2 text box's txtdatestart and txtenddate after entering. date range between the too text boxs it shows me all job raised with in the period.i have entered what I would like is filter it again by client field using combo box cboclient so if the user enter's client name in cboclient combo box and date range in txtdatestart and txtenddate it will only show jobs raised with in the date range of the client enter in the combo box but if the combo box is empty show.
Code:
Private Sub cmdPreview_Click() 'On Error GoTo Err_Handler 'Remove the single quote from start of this line once you have it working. Dim strReport As String Dim strDateField As String Dim strWhere As String Dim lngView As Long Const strcJetDate = "#mm/dd/yyyy#" 'Do NOT change it to match your local settings.
I am trying to filter out information for an ODBC query I have written, to obviously make it more concise. Because our data is not set up very logically, a lot of my queries are based on text...but that is another story. My current situation starts with a simple make-table query finding certain data within a date range. This is followed up by another simple make-table query to find other specific data within another specified date range. Then I have a cross-tab query between the two tables to locate all the data that shares the same unique identifiers. My problem lies with trying to only pull information from a certain date range. For example, I want information to be included if the data has the same unique identifier as well as falls within +/- 7 days of the received date (dd/mm/yyyy) also listed in one of the tables. Each record will likely have different received dates so I cannot set it as a constant.
Make sense to anyone? I am not confident enough to play around with some expressions...well it is more I haven't been successful at using them correctly.
I Have a table that I collect data for numerous ID's. One ID may have 5 dates that is was serviced. It is due to be serviced at set intervals which is calculated from the most recent service date. I'm calculating the next service date in a text box with the DateAdd func. =(DateAdd('m',[Cal Freq],[MaxCalDate])) with the MaxCalDate being a Max func in a different text box for selecting the most recent sevice date. I'm trying to update the [Next Due] field in the [Master Asset] table with the calculated next service date so I can do queries on items that are due service within a date range. If I do an Nex Due Expr1: in the queries to calc the next due service date then do a criteria on that Expr1: such as >=[Start Date] And <=[End Date] it states datatype mismatch? Is there a way to select a requested data range on a calculated type date/time? Or How can I update the [Next Due] filed in a different table?
I need to print out a report from a start to end date. But theres a catch i also need to print those items from previous months that are not yet resolved. I have a checkbox that tells me if the record has been resolved or not. Is there a way that I can put both the conditions into my query, one for the dates of transactions and the other being all outstanding items no matter what the date.
I'm trying to figure out how I can set a parameter on my query to search for any activity that occurs within a month, that falls within a date range. Specifically:
Criteria TextBox: 4/2006
Activity Start: 3/6/2006 Activity End: 5/5/2006
I want this activity to show in my query because the time between start and end occurs during the month of April. It's no problem setting this up for a specific date, ie 4/1/2006, but I don't know how to do it for an activity that occurs all days between 4/1/2006 and 4/30/2006..or for one that starts 4/12/2006 and ends 4/18/2006, or starts 4/12/2006 and ends 5/9/2006. etc.
I have a table of data, one of the fields is a date.
What i want to do is be able to have a query that can check if the date falls within a certain range - ie fiscal year and output in another column the fiscal year "code".
Ie: dates between 01/06/05 and 31/05/06 is fiscal year 0506 dates between 01/06/06 and 31/05/07 is fiscal year 0607
Could this query be dynamic so if a new fiscal year begins it would know to make the output the next fiscal year code???
I have two tables: tblClasses & tblSchedule. There are joined by ClassID. For each class in the tblClasses there are several records with date field in the tblSchedule. (So each class stored in tblClasses happens on multiple dates stored in tblSchedule).
I want to create a query (SQL view) that would take two date inputs from a form(date range): datefrom & dateto, and return any class of which FIRST day of classes falls in between those dates.
(Or: how can I add a field to my query called [First day of class] that would basically have the value of the first date from the tblSchedule for the joined classID?)
I need to get records between two dates. Here is my query:
SELECT WGMAHIST_TIMEDTY.TDYPT, WGMAHIST_TIMEDTY.TDYCO, WGMAHIST_TIMEDTY.TDYSSN, WGMAHIST_TIMEDTY.TDYFND FROM WGMAHIST_TIMEDTY WHERE WGMAHIST_TIMEDTY.TDYSSN = 464299266 AND WGMAHIST_TIMEDTY.TDYEDT >= #06/29/2007# AND WGMAHIST_TIMEDTY.TDYEDT <= #09/21/2007# AND WGMAHIST_TIMEDTY.TDYPT = 1 AND WGMAHIST_TIMEDTY.TDYCO = 8
I am obviously doing it wrong because I keep getting an error that complains about the key work BETWEEN.
How can I make this work? I am using MS Access 2007.
I have a form with a combo box containing the names of the Months. What I want to do is then pass the Month name to a query as a date range. For example, select "May" from cboMonth and the query will check the date field for "between 05/01/2008 And 05/31/2008"
Here is what I have in my query but it does not show any records when I run it:
IIf([Forms]![Form1]![cboMonth]="May",Between #5/1/2008# And #5/31/2008#)
Is it even possible to use this type of an expression in the query?
Hello - I am trying to create a FOrm that will allow the user to type in two dates. From these dates a table will be created and displayed in a List Box.
Does anyone have a very simple example of the code
1. I am trying to write two input boxes to variables. 2. On click I am displaying a message box that repeates the values of these two variables 3. When they hit OK I want the records to appear in the ListBox. 4. From this point I will want to get the data to a report of some kind.
I am very new to this and am trying to see if someone has any code examples....
This is the code I have so far.....Actually I cant get passed #2 above. It shows the message box and the text but not the values of the variables...
I dont think I am using the variables right......I dont understand the syntax needed to write an input box value to a variable......
Please Help....
THanks
CODE:
Option Compare Database
Private Sub BeginingDate_BeforeUpdate(Cancel As Integer)
Dim BD As String
BD = BeginingDate.txt
End Sub
Private Sub EndDate_BeforeUpdate(Cancel As Integer)
Dim ED As String
ED = EndDate.txt
End Sub
Private Sub Command5_Click()
Dim var_BeginingDate Dim var_EndDate
var_BeginingDate = BD var_EndDate = ED
MsgBox "The Variable is " & var_BeginingDate & " and " & var_EndDate, vbInformation + vbOKOnly
I am trying to generate a report from a select query using the report wizard. The wizard is showing the error of subscript of out range. What is the reason and how can be rectified?
