Forms :: Main Form Opening Subform In Add Mode But One Field Is Already Filled
Jul 20, 2015
I'm using Access 2007. I have a few problems:
1. I have a switchboard. I want to click a button, that opens a form with a dropdown list, when I make my selection, it opens a subform in add mode, but the linked field in the subform isn't empty, but filled with the mainform's field value that I selected?
OR
2. Is there a way for me to open a form in add mode, add data to it, click the add button (I will add an add button) that allows me to add again, but this time a particular field is not empty, but filled with selected info from previous selection?
Say for instance, I have 2 fields (both combo box fields), I click add, made selections for both fields, I click add again, but this time one of the fields stays constant like it's already been selected. It's filled with what was selected from before.
I have several subform tabs and one that I have updated no longer shows up when I run the form on Form mode. The tab is there but no content or details of the subform
I haven't programmed using Access in about 10 years and seem to have lost all knowledge of it.I'm struggling to make a really simple application. I need to keep track of which serial number is attached to which order.All I want is for me to be able to scan a barcode (or manually type the numbers) into a 'packschein' (packing list) and then to scan all the barcodes of the products' serial numbers relating to this packing list. Then preferably simply press the enter button or even better scan a barcode which launches the code to save the new entry.
So a packing list can have 1 or more serial numbers.However, the way I've set it up, for some reason it requires a packschein number (good), but then does not require a serial number. I have this feeling I messed up with the way the tables are meant to be linking to one another.
I have a Form opening from Access Options. I would like to close this Form using the Timer. The following is the code I have used but it is not working.
Private Sub Cover_Page_Form_Load() OpenTimer = Timer End Sub Private Sub Cover_Page_Form_Timer() If (Timer - OpenTime) = 5 Then DoCmd.Close acForm, "Cover_Page_Form", acSaveYes End Sub
Next question. If I can get this to work can I then use a DoCmd to open new Form within the code above or do I need a new process.
Hello, I'd like to know how to set values to a subform when opening a main form I have a quotation form called FQuotation with a subform on it. This subform is the link between the products and quotation it is called SFProdQuote and has the fields: refproduct, quantity, quote and PQTotal. Once I have filled the info on the main form i pick the products on the subform using a combo box on the refproduct field, input the quantity and give it a quote. All this works fine it calculates quantity x quote = total.
My issue is I'd like to create a quotation form that opens with a set of products already selected in the subform. let say 10 of them, since my quotations always start with the same 10 products or so. I do not want the users to have to select over and over the same things.
Is it possible to open a form with set values selected in the combox of its subform?
How can I get the value from a field in one table (in the sub form) to copy/insert into a field in another table (in the main form) when adding a new record?The main form and sub form are linked using parent/child linking, and the sub form is in a tab.I have table A (Visit Dates) in the main form which is used to record the date of a visit to a church. Table B (Quarters and Peals) is used to record an event that took place at that church during that visit. Note that not all visits in table A require a record to be created in table B - but half or more do.
In tables A and B I have a field called "QuarterOrPealID" and these are both primary keys, though the field in table B is set to 'no duplicates' and in table A it's set to 'duplicates allowed', as table A has its own auto number/pk. They are both linked in the relationships.
So, when I add a new record to table A using the main form, I might then need to click on the tab in the sub form to create a new record in table B, which has to be linked to the same record in table A. When the "QuarterOrPealID" auto number/pk is generated in the sub form (table B), I need that value to update to the "QuarterOrPealID" field of the main form (table A), so that when I'm viewing these records the form pulls all the information nicely together.
I am currently stuck on set focus property. I have a main from with nested subform. I am trying to move the focus from last field of the subform to another field on the main form.
Now I have a field name [Securedesign] in frmOrderdetails and I want the tab order to navigate to field [CustomerID] in frmAddresses which is a subform to frmCustomers.
I have a music database. It's somewhat over the top in terms of the information stored in it, but I like it. My issue is with getting the total number of tracks, as well as the total duration, for a given album (and for each disc, but if I can solve one that should also solve the other).
I have a lot of tables and forms, but for this problem I only need to deal with two of each. They are the tables for albums, the table for tracks, and their associated forms.
In my album table I have information such as album title, artist, release date, and album length. The tracks table contains information on each song - track title, track number, parent album, and track length.
My main form is for the album itself, and contains a subform for the tracks on said album. They correspond to the relevant tables.
What I want to do is obtain the value of the album length by calculating the sum of the track lengths for that album, and the number of tracks. Easy enough - Sum(TrackLength) and Count(TrackID) respectively, both of which can be stored in the footer of the subform.
My problem is that, rather than simply copying those values into text boxes on the main form, I want to copy them into actual fields in the album table. Furthermore, I want them to update as I add or edit the track lengths in the subform.
I have an entry form with a field(combo box) called cboGetCode. I also have a sub form (continuous form) with number of fields, also an entry form. Now, I have added a code behind the cboGetCode AfterUpdate event to populate the result to relevant fields in the main form.
I have a subform embedded in a main form, the subform has a field (text box) that is doing automatic calculation so no manual entries are needed from the user. I have tried to pass automatically the final result to a text box in the main form, but all events are not working (afterupdate, On change, On Dirty), etc.
I have a button to do the above mentioned in the main form, but I don’t want to use that button, I want to do all the process from the subform.
Also, from the subform I was able to do click on the button on the main form (programmatically), however MS Access is too quick and the value extracted from the subform is always empty (zero); Acees is finishing before the calculation is done.
I have a Main form with a sub form.The main form is a customer record (form view), and the sub form is all other customers (same fields) datasheet view.I have a navigation bar to filter (using different queries) the results in the sub form
same postcode Same company (different location) everyone except Main form customer
I cannot get a different filter (Query) to show only customers whose name begins with the same letter as the customer in the main form?I have been trying Like but think I am referencing it wrong, as it prompts me to enter a value rather than using the value in the field in the main form.This is what I have in the query (of the subform)
Customer ID: <>[Forms]![NewAllCustomerListF]![CustomerID] Customer Name: Like "[Forms]![NewAllCustomerListF]![CustomerName]" & "*"
productId ( which is filtered from combo boxes on main form) . productId contains two columns 1 bound column(id) ( hidden with width 0 ) 2 column (desription) ( shown with width 2 )
Now after entering the data when i come back to the form again . It hides the data from the productId field on subform , because data in combo box (on main form) doesn't match. Although the row is showing up , only the text in field (productId) is hidden.
Now when i change data in combo box on main form to match the ProductId , then the productId field text shows again. after changing combo box it hides . What i need is the existing data should not hide when i change the combo box selection.
see pic 1 where product matches and pic 2 where not. please note i am using master child relationship on the form/subform.
In my database main form with subform. subform have query as recordsource.total of one of field in subform shown on main form. all is ok and show total correctly but when subform have no records then total field on main form shows #error. How to convert this value either into null string or zero(0).
the forms are not opening in modal/dialog mode when they should be.The forms' pop-up and modal properties are set to "yes"..The code specifies to open Dialog so, for example:
Yet, the form opens behind the other form (which, incidentally, is also set to be pop up and modal in the form properties--is that the problem? If so, why wasn't this an issue until now?).
I have put much time in designing a form. After exiting and saving it, I cannot now open it. Only the Page Header shows, and I cannot get into 'Design' mode. I have tried repairing and compacting to no avail. Any ideas?
Any easiest solution so that After I Update the field called JobStatus in the subform, it changes the field called JobStatus in the main form to the value which was selected from the subform?.
hi, i would like to be able to prevent a user from being able to change a field (lock a field) in a main form if a field in a subform is complete. (the field in the subform is named: "new_weekly_base" if this is complete then i would like the field: "weekly base" to be locked on the main form. is this possible?, please help.
the main form is named: "SCREEN-MAIN" the subform is named: "SCREEN-SUBFORM" (the main form has a button on it which loads the subform.)
ive tried the below code but it doesnt work, any help would be excellent.
------------------------------------------------------- Private Sub Form_BeforeUpdate(Cancel As Integer) If [NEW_WEEKLY_BASE] >= 0 Then
With Me.WEEKLY_BASE .Visible = True .Enabled = False End With End If End Sub ------------------------------------------------
I just imported all of my objects (tables, forms, etc.) into a brand new database file and all of my forms are now full screen instead of the size I set them to in design. What caused this? I can't get them back to their normal size.
I am using Access 2007 but imported files into 2003 .mdb file.
I have a main form with a field "Calibration Date" which shows the latest calibration date of a specific item. I have a subform that has a field "Cal Date" that is the latest calibration of this specific Item. In the Subform there may be multipul "Cal Date" enteries for that specific item but in the main form I want the "Calibration Date" to update to the newests Cal Date enetered into the subform.
Code: SELECT ContainsTracks.albums, ContainsTracks.tracks FROM ContainsTracks WHERE ContainsTracks.albums LIKE [VALUE IN TEXTBOX1 FROM MAIN FORM]
As you can see in the brackets, I would like to use the value in textbox1 on my main form in this query (so I can select only the tracks from the album that is typed in textbox1, disregarding the others).
i have a main form for customers and a subform for sites which is set to locked so its displayed as just a list. I have a button on my main form to add a new site for the current customer displayed..How can i get the Main form '1CustomerDetails' with subform '2SiteList' to automatically refresh one i've clicked the save button on another form.
I have a main form that has some sub forms on it linked by master child on PK. When I select a new record on the sub forms I want to take a date value from the main form and populate the value into a field in the sub form. How do I do this as I cannot see a new record event on the sub form?
