Forms :: Limited Number Of Records In Continuous Form / But Now Can't Add Records
Mar 22, 2013
One shows my form with the Transporters Subform with 3 entries, and 1 entry.The three line items that say "Transporter" are in one subform. I used this code
Code:
Private Sub Form_Current()
If Me.RecordsetClone.RecordCount >= 3 Then
Me.AllowAdditions = False
End If
End Sub
to limit the number of records I can add to 3 or less.My issue is that I lost the blank text box that allows you to add another record. So, if I only have one Transporter listed, there's no box to let me add a second or third.I have the following properties for the Transporters Subform set to "Yes":
Data Entry
Allow Additions
Allow Deletions
Allow Edits
Allow Filters
Is there any way to highlight duplicates across a number of records on a continuous form (conditional formatting I presume)? My continuous form is filtered on load to show only the records relating to the specified date (specified before opening the form), and there is one field that I would like to highlight if there is a duplicate value in the same field on another record on the form. Is this possible?
I have Main form, and Subform (which is continuous form). Now when i open main form (or even subform itself) i see continuous form, and two empty rows.Whenever i fill first row and press on second, third row appears, and so on.
Can i set somewhere to show me only 1 empty row on this continuous form, and when i fill it, second row appears, and so on. E.g. is there any options for customizing how many empty rows are displayed and the begining of continuous form?
And how "saving of records" work here, because if i fill one row, it won't save anything....it will save it only when i press on other row (when third row creates)
I have a bound continuous tabular form,However, based on data content in one field of a record, I want a checkbox in the same record enabled, so the user can check it if necessary. I have created a record set using the form as shown below, and I am looping through each record. To show that my code is referring to the field with required data content, I display it as a message box and it works, yet my checkbox does not enable.
I have the code in the form_load event, however, for testing purposes I have it behind a button.If I am seeing this properly, the code behind the button enables the checkbox for ALL records once the criteria in the required field is true, and based on the last record, which has no data content, it disables the checkbox in ALL records. I also have the PK ID for each record hidden in the form. Can I utilize that to target the checkbox of each individual record??
Form Detail -Form does not allow additions or deletions. Edits allowed -All fields are disabled and locked -I only want the check box to unlock if data is found in the "RequiredField" as referred to below. I have also tried if not isNull(requiredfield.value) then -enable checkbox, which yields the same results
Here is my code
Code:
Dim rstMyForm As DAO.Recordset Set rstMyForm = Forms!MyForm.Form.Recordset rstMyForm.MoveFirst Do While Not rstMyForm.EOF If Not RequiredField.Value = "" Then
I have a form listing tasks to which I make personnel assignments with a multi-value list field type. It takes some time to select from 15-25 employees on the list for each task, especially considering that small groups of employees will be assigned to the same selection of tasks.
What I want to do is select multiple records with the mouse, then click a command button opening a form in dialog mode with the selection list. The user then clicks to make his selections and clicks ok, which then updates the multi-select field for the selected records.
I have a continious form with textfields as records. Its about total course hours that are calculated. There is a field in the records that holds and calculates the hourse that one have done and another field that holds the max hours they may follow for one year.
Every record has h different year.
When the amount of hours in the transmission textfield is negative, they can transmit the hours to te next year. Therefore i have to calculate the Max hours per Year + the transmission hours.
So the calculation is not a problem. Though i don't actually know where i can trigger the calculation. I have tried it with a button on the form, but then the user always have to click to see the right amount of hours for the next year. That's not handy. I am looking for a way to automatically calculate the field Max hours per year. Given that the Max hours per year is a bound field, its bound to a table where i stock the Max hours that i have calculated.
I also tried it with the button that's used for inserting new course hours, but then it calculates with the old values instead of the new ones.
How can i trigger the calculation automatically without using a button.
I have a database that has transactions since year 2009. I want the users to only be able to view and edit transactions that were entered in the last 6 days. I was initially able to do this by putting a filter in the Property Sheet section of the form and choosing Yes for Filter on Load.
However, a user was able to discover that by clicking on Clear All Filters, the filter I set was also cleared, thus making them see all the transactions beginning year 2009.
I have a query that returns a set of records which details stock items that are older than a date given in a form. However i need to limit the results to the number of items held in stock i.e say i want to look at stock over 1 year old, i get a list of all the stockids, and the date added. Say there is a stock level of 3 for a particular stockid the results should be limited to the first 3 records that are over 1 year old. Rather than the whole list of dates I get now.
Any help or direction with searching terms would be appreciated
I have a form containing 4 text Boxes txt1, txt2, txt3 and txt4
I want
txt1 show records from table empDetail having age between 18 to 25 txt2 show records from table empDetail having age between 26 to 35 txt3 show records from table empDetail having age between 36 to 45 txt4 show records from table empDetail having age between 46 to 55
Hi, I am in need of help to sort out some records. I have tow existing queries I would like to combine and get one final set of records out of. They go like this:
Query 1. (unique #) Lot Protocol Sample # 1 mth 2 mth 3 mth X ABC 1 x x (check Y ACD 2 x x boxes)
Query 2. (unique #) Lot Protocol Sample # 1 mth 2 mth 3 mth X ABC 1 8/8/05 9/8/05 10/8/05 (query Y ACD 2 8/8/05 9/8/05 10/8/05 performs calculations)
What I am looking to retrive through the third query is this:
Query 3. (unique #) Lot Protocol Sample # 1 mth 2 mth 3 mth X ABC 1 8/8/05 9/8/05 Y ACD 2 8/8/05 10/8/05
Where the third query only shows the calculated dates when the check box is true. So for month 1 & 2 I get dates for Lot X and for Lot Y I get dates for month 1 & 3. I have tried to go through the expression builder, but to no avail. I either get all records, like query 2 or I get nothing reported. I am not sure how to limit the records based on the check boxes.
I have a form with Continuous Records as its default view. I would like to number the amount of records displayed on screen to about 5 or 6 at a time instead of having them scrolling right off the bottom of the screen. Is there any easy way to do this? Thanks
I have a table and a form with continuous records (218 items). In a different table I have the status of these 218 items. In design view of the form I have added a label at the end of the record.
I want to use the DMax to set the caption of that label to the status of the particular item, but it sets the status of all 218 items to the status of item 1. How do I get it to distinguish between the records.
I guess somehow the record source for that label must be changed to the status table after form has loaded, and then run through all records and update the label caption.
I have a continuous form that opens all of the records for a specific user on a specific date and displays them in a continuous form. Each record requires an approval check box be marked before it can be processed for reporting. I want the approver to be able to click a button and mark all of the records displayed at one time. Currently my button will only mark the current record. How to I select all of the records?
I have a continuous subform (frmLabor) that has an unbound box in the footer. This unbound box totals all the numbers in the Total1 field using DSum. However, when I change the record in the main form (frmCustomers), that number still stays there, and when I add records (service hours) to the subform under a new record (customer) in the outer form, those numbers sum. I understand what's wrong, I just don't know how to fix it. How do I get it to calculate ONLY the records (service hours) in the subform per record (customer) in the outer form?
I've been trying to get my head round this one , but i'm just to thick to get it.
I have a continuous form that lists all items at a certain location. The user selects a record by clicking on the record selector and then clicks on a command button with this code:
The user then enters inspection details in to the "DivingInspectionCert" form which i want to store in a table (DivingCert) which will relate to the item. On completion of this form the user then clicks on a command button with this code:
DoCmd.RunCommand acCmdSaveRecord
If Me.RecordsetClone.RecordCount = 0 Then MsgBox "There are no items to Print", vbInformation, "EquiTrac" End Else DoCmd.OpenReport "DivingInspectionRpt", , , ("EquipmentID = " & Me!EquipmentID) DoCmd.Close
When i click on this button, the report doesn't print and i get a message "No current record". The inspection details are not stored in the table. I did have the forms RecordSource based on the table "DivingCert" but that didn't work and i have just tried a query but it is still not working.
Would be much appreciated if you can help me. Thank you
I have a form (Form4) which has a a list box (list11) that allows multi select. When I select on the records I need I hit a button that opens a form up with the selected records. This form is a continuous form. I have an unbound combo box (Combo55). Its values come from a specific table. I want to hit a button and change the field "Assigned" on all the records showing to the value that I selected in Combo55.
The problem is it only changes the value of the currently selected record. How Do I get it to change the value of all records that are showing?
I am only testing this idea with default field names. Before I implement the database I have to get a working model and present it. So I am building this and naming at the moment isnt important.
The Ignore, OverTime, AnnualLeave fields are bound to a I, O, A checkboxes respectively in this continuous form. The ExtraValue bound to a EV textbox in this form.
What I want is that when the user check O or A checkboxes, the EV textbox is enabled only for this form record NOT all the form records, when the user check I checkbox, the EV textbox is disabled only for this from record, NOT all the form records.
The problem is that whenver the user check, all the form records EV text box is affected by this action.
I have a main form with several continuous subforms. Each subform consists of several listbox controls. I would like to require the user to select an item from the listbox before being allowed to move to the next record in the subform, and upon reaching the last record in that continuous subform, to require an entry there in order to move to the first record in the next cont. subform.
As an added bonus, it would be nice, though not necessary, to automatically jump the focus from one record to the next after data is entered. But my basic goal is to avoid skipping records.
Caveat: I cannot use the "required" option in the field to which the control is bound because that field has a default value previously entered using an append query. (The default value basically means "not yet entered" and is not one of the options in the listbox. I am using this because this field is a foreign key in the table, thus it must have a value in order to have a record with which to populate the subform.)
My apologies if this has been asked and answered elsewhere, but I've searched and, while I found a few related threads, they don't quite answer my question. Here they are for reference:
Thanks for any help! Also, if you are going to recommend VB code, could you be specific about how and where I should use it? I'm not afraid of code, but I'm definitely new to it...
I have a form which needs update ever month. When the form is opened, the end user can see the old records and data, and also a new record is added for any new data. I want to protect the old saved data and the user can only add, edit, or delete the new data in the newly added record. The problem is once a user adds the new data and moves to another record or another form, then he/she cannot edit or change the new data in case if there is any mistake or need to change something after couple of minutes.
I changed the Form Data Properties "Allow Additions", "Allow Edits", and "Allow Deletions" many different times and situations to solve this problem but with no success. I tried the following with NO success too: One of the Fields of the Record is (Month). In the Data Properties, I set a Default Value for this field as(December 2014) for instance. I set the Data Properties "Allow Additions", "Allow Edits", and "Allow Deletions" to (Yes). Then I put the following code in the Form's Current Event:
Private Sub Form_Current() If Me.month.Value = "December 2014" Then Me.AllowAdditions = True Me.AllowEdits = True Me.AllowDeletions = True
I have a summary form with the company name,week number, week-ending automatically populated. e.g. this week is week 4 and users enter records for week 4 as the week number is automatically generated. Basically the system will just recognise today's date and generate the week number. Problem is I am trying to display previous week records and I do not know how to filter it as my week number is generated automatically, week by week. All the other forms are linked to this week number. How can I display records for a specific week that I want? say, I want to display all records for week2, etc. I am dumbfounded as I am on a learning curve with Access.
