General :: Auto Populate A Table Field From Combo Selection
Jan 17, 2013
I have a Table (tblFPAData) that is being populated with entries from a form I created. There are several fields but if I can get an answer for one relationship then I can repeat it for the others.
In tblFPAData there are the fields MaterialNo and Description.
I am creating another table called tblSchedule and using a form to enter the information. I need the user to select the MaterialNo from a combo (cmbMaterialNo) and the then table auto populates the Description from tblFPAData.
I am trying to populate multiple text boxes from combo box using one table. First text box is getting populate on base of combo box value while 2nd text box is not getting populating.
I have used the following to populate the text boxes, even row count is correct, But why is not 2nd text box is not populating ?
=[Combo2].[Column](1) =[Combo2].[Column](2)
One thing I noted when I provide the control source then selection gets stop from combo box...I am giving the valid control source is customerID but its not working.Could it be the reason ? Why selection gets stop from combo box when provide the control source ? If remove the control source then 1st text box is getting filled on basis of combo selection and 2nd text box value is not getting filled as describe above.
I'm creating a form that when the user selects the following categories in the same combo box (Date Received, Date Reviewed, Date kitted, In Work, Complete) it auto populates dates in the respective fields. As I mentioned, it's only one combo box. The dates will be spread out, so the user will change the combo box selection based on when these events occur. I already have a field for each category both on the table and form. Also, I do have multiple tables for other parts of data, but these categories all fall into the same table.
I am trying to build a form in the MoldReq section so when the user selects the mold number(combo box) it will auto populate the Part_Name and Part_No fields by pulling the data from the Molds table.
I have tried following this video where I create a change event:
Code: Private Sub cboCombo31_Change() Me.txtPart_Name.Value = Me.cboMold_No.Column(3) Me.txtPart_No.Value = Me.cboMold_No.Column(4) End Sub
I have two tables: tblWeightTickets and tblWasteType.
I want to create a form: frmWeightTickets, where a user can enter information and the data is stored in tblWeightTickets.
There are two fields in particular that I am working on ... "WasteType" and "Rate".
On the form, I want "WasteType" to be a combobox "cboWasteType" and when I select a type of waste I want the "Rate" textbox on the same form to auto populate with the rate amount for that particular type of waste (i.e. recycling, garbage, etc).
The Rate amount is located in the table: tblWasteType under the field name "Rate". How can I do this and at the same time store the information in the tblWeightTickets? I already have the combo box loaded with the types of waste - I just need it to populate the rate text box and store it in the Weight Tickets table.
I have a training log that has 4 tables, the employee table, the training course table, and the department table.
These tables all contain the names of employees, training courses, and department in one field and their respective ID codes in the other.
The 4th table is the actual log where the manager logs in who took the training courses. When the manager goes to select the employee name, course name, and department name is there a way not using VBA for the respective ID number to appear in the 4th table (they use the same field names and are related)
I have a table called Auction, it has three fields, seller, iid, and start_time.
I made a combo box on a forum and in the I have a query,
My question is, I have a few combo box, can I have a user select a seller, but it will automatically populate in the same row, the iid and start_time for this seller?
How do I do this, I can't have separate combo box and have user select for each seller, iid and start time because it wouldn't match it to that seller on the same row.
Within my table if Field 1 has an answer of Self (from drop down), then, I would like Fields 6-12 to auto populate; however, if Field 1 does not have an answer of Self, then leave Fields 6-12 blank.
I am not quite sure how to lay this out. I am using Access 2010.
I'm creating a database that keeps a track of questions and scores.
The questions in the database need to be dynamic and are changed frequently.
I have a scorecard table which keeps a record of scores and the applicable question at the time the record was saved. I need to do this because in 6 months time we may want to provide feedback. As the question may have changed we need to be able to refer back to what the question was.
I want the question field in my scorecard table to populate with the value in my question table.
I have tried a number of things including setting the question field in the scorecard table to a lookup based on the following query:
SELECT tblQ1.Q1 FROM tblQ1;
This works however only as a list or combo box. I don't want the user to have to select the question. I want it to auto populate, is this possible?
I am creating a database to keep up with the expenses for my art business. I have a table for Vendors with a field (Mileage) for one-way mileage that I enter manually (EX: 11.8 miles). Then I have a calculated field that basically just multiplies the Mileage field times two to get total mileage to and from my house to vendor location. (Total Miles) {The reason I want to do this this way right now is because I didn't keep up with my mileage this year and I am having to look up the distance from my home to each location)
Then I have a "supplies" table where I show the date, the vendor, the item, cost, etc, and I want to add a Total Mileage field based on the calculated Total Miles field in the Vendors table that will automatically populate based on the vendor of each transaction. I just can't remember how to make this work and I know just enough SQL to be dangerous.
I am new to Access and have started to move across some Excel based programs.
I have a simple example with two tables and a form where on the form a customer ID is entered which displays the name and below it is necessary to enter the total payments made by that customer for the day ( all records for the same day are entered at one time, which is why I would like to autofill the date).
I can enter the date directly on the form for each customer entry but I would like to automatically enter the required date in the payment table using the value of a datepicker on the form to ensure that no date errors are made.
I have been trying to use the expression builder to do this but the datepicker does not seem to appear as a valid option.
I have two forms - Main and StudentAdvisor (filtered by student ID#) SAdvisor.jpg
The main form originally had a combo box field to display advisor, the problem is that some students had multiple advisors during the course of their program. This problem was fixed by the creation of a StudentAdvisor (table/form) for recording ALL advisors. I set the form to display by newest term so the current advisor (or initial if no change) is the displayed record.
On the main form I then added "add" to open the StudentAdvisor form for entering information, and an unbound txtfield to display their current advisor (or initial advisor if no change).
The problem is I can not get the txtfield to display the information. I have managed to get the error ( #Name?)
Advisor Type 1=Initial, 2=Current, 3=Previous Changed 1=Yes, 2=N/A
so a record would record as: Initial and N/A Current and Yes Previous and Yes
I tried writing DLookup but could not get that to look up the combinations (above) and display either initial or current.
also tried pulling form SA = Advisor to form Main = txtAdvisor
For report purposes I need to know not only current advisor but how many were assigned during the program and also how many students each advisor was assigned during certain time frames.
So I've created 3 tables - one for each information group arranged like so. However my problems are - I don't know how to make it so that as soon as all the info for one set of parts is filled another set automatically appears? And in the Design section of the Form I have the following error because I wasn't too sure what to use apart from a text box-
I've got a Parent form (frmProspectDetails) with a subform linked (fsubProspectSkill).
This form is for users to enter general information on a prospect (names, position, height, weight, etc) on the parent form and skill levels on the subform.
Currently the subform is set so the user has to manually select the specific skill set for the prospects position, and then enter a value for each skill level(1-99).
I'm trying to get the subform to auto populate with a specific skill set based on the position selected in the parent form, so the user only needs to input the skill level without selecting each specific skill.
This data is then stored in a table (tblProspectSkill)
To add, I've created a form (frmPosition) that lists the specific skills set for each position.
I'm not sure how to get this subform (fsubProspectSkill) to auto populate with the specified skill set from frmPosition.
I'm have quite a difficult time getting a form in Access 2010 to perform the way I would like it to. I have multiple tables that I've created, and a query that contains the data from the various tables. I then ran the form wizard to select the data from the query that I wanted to populate in my form and I've added 2 combo boxes.
What I want to do: 1. I want users to be able to select a category in combo box #1 (example: "Bag") 2. I want users to be able to select a detail in combo box #2 based on the category they selected in combo box #1 (example: Combo box #1, "bag" would populate the following selections for combo box #2: "sandwich" and "tool") 3. I want users to then receive a list of suppliers that provide the product they have selected, either "Bag: Sandwich" or "Bag: Tool"
I have combo box #1 populating a list of categories already. However, I am not able to get combo box #2 to provide choices based on the selection chosen for combo box #1.
I have with my database. It's holds cost data including purchase made in foreign currencies which need to be converted to GBP using the correct exchange rate so a variety of reporting & stats can be performed.I have a table called Costs within which there are 2 fields
Purchase Currency Exchange Rate
I also have another table called Exchange Rates 13/14 within which there are 2 fields
Currency Exchange Rate
When a value is entered in the Purchase Currency field on the Costs table (this is a look up field linked to Exchange Rates 13/14 so it shows the listed currency in drop down) I need the database to automatically populate the Exchange Rate column in Costs i.e. match the value in the Purchase Currency field to the Currency field in Exchange Rate 13/14 and populate with corresponding Exchange Rate from Exchange Rate 13/14.I have tried the following and none work:
SQL Tried
1. UPDATE Costs SET ExchangeRate = [Exchange Rates 13/14].[Exchange Rate] WHERE Costs.[Purchase Currency] LIKE [Exchange Rates 13/14].Currency
2. UPDATE Costs SET ExchangeRate = [Exchange Rate] FROM [Exchange Rates 13/14] INNER JOIN [Exchange Rates 13/14] ON Costs.[Purchase Currency] = [Exchange Rates 13/14].Currency
3. SELECT [Exchange Rate] FROM [Exchange Rates 13/14] WHERE Costs.[Purchase Currency] LIKE [Exchange Rates 13/14].Currency
I know it is possible to have a drop down for Purchase Currency which shows 2 columns (both Currency and Exchange Rate) you can then use the exchange rate figure for a calculated field. The problem I have is that I am importing data into the costs table from excel. In Excel I can only have 1 value in the Purchase Currency column on the upload template. If I just have Euro in this column the database does not match it to the Euro in the Purchase Currency drop down and also store the correct exchange rate.
Or is the alternative to put this into the calculation of GBP Unit Cost where this somehow matches the Purchase Currency in the Costs table to the Currency field in Exchange Rates 13/14 tables and uses the appropriate exchange rate from Exchange Rates 13/14 to calculate GBP Unit Cost in Costs table.
On paper I have designed a faculty contact database and have now come to the point where I am designing the form. In the contact information table are Cell, Home, Office fields as well as Personal, Work, Alternate email fields which will contain the corresponding information. On the form after the information is entered the person needs to select an option from each of four combo boxes to indicate which is the preferred number, number for student, preferred email and email for students. The question is how to populate the text fields in a report based on the selection of the combo boxes with the information stored in the corresponding field (cell, home, office phone numbers and personal, work and alternate email). I am assuming it is done in the query but I don't know how or can it be done in vba?
In the database attached I have a form called from Candidates.In this form is a combo box where a user can select what company the candidate belongs too.
However some candidates are Private Individuals (do not belong to a company).Therefore, I want the Position field to be set to 'n/a" by default if 'Private Individual' is selected.
I have 2 questions which are linked. I am trying to run a query based on a selection from a combo box. Would someone be so kind to indicte if i need to use VB or can i do it directly from Access?
I have made the query and the combo box table but i am unable to get the combo box selection to be used in the query.
Additionally i want the query to look at a date range. In the query criteria i use "=now()" but i want the combo box selection to populate the rest of the criteria so it look like =now()+ XXX where XXX = a number of days, eg 14 or 30.
I have a form that has a combo box in the header. I want to be able to select an employee name and the remaining info in the detail section of the form populate. My other fields are:
Employee Name - text box Reporting Unit - combo box Department - combox box Primary Phone - text box Secondary Phone - text box Emergency Contact Name - text box Relationship - text box Emergency Contact Primary Phone - text box Emergency Contact Secondary Phone - text box B-Alert Txt - combo box B-Alrt Phone - combo box e-mail - text box
I've designed a data entry form based on a table. I use a few combo boxes, (linked via SQL statements for their row/source) to fill most of the fields in the table.
What I want to do is populate one textbox on the form with the contents of a field in one of the combo box's row/source tables. The field I want isn't shown in the combo box.
Basically, what I want is that when I choose a PART NUMBER from a combo box, I want the OEM_ID from the same table to jump into the textbox below it.
I think I may have tied myself in knots though to the point where what I want can't be done. Any ideas? I know this is probably going to take a couple of goes at explaining. :P
I have a form frmCrisisSupportWorkers with a tab control on the form. On the first tab, Personal Info there is a combo box called cboLocation. It is next to the Town/City.
I have a text box that updates the postcode after the selection is made below it but that is as the post codes are stored in the combo box and I just put the column for the postcode in the control source of the text box.
I can't do that for state as I have it stored in another table and use a numeric identifier to show which state is selected.
I want to have a text box below that auto updates the state once a town is selected but I can't seem to get it working.
I accidentally posted this in "general"...so I am posting it here under "forms", since it is "form" related. My intention was not to double-post...sorry. Summerwind had posted an example to auto populate a combo box. The code below follows his example, but is not working for me:
The fields I have on my form are:
cboCompany cboLocation
cboCompany is based on tblCompany( with fields CompanyName, Location)
When I update the cboCompany field, I want the cboLocation combo box to populate with all locations for the company that was entered into the cboCompany combo box on the form. E.g. The company "Visions" may be exist in the tblCompany with 3 different locations: Visions (Las Vegas), Visions (Ohio), Visions(California). When I pick the company "Visions" from the cboCompany combo box, I want the cboLocation combobox to be populated with "Las Vegas", "Ohio", and "California".
The code is as follows but returns empty records in cboLocation:
Code: Dim StrSource As String
StrSource = "SELECT Location FROM tblCompany WHERE tblCompany.CompanyName Like " & Me.cboCompany.Column(1) With Me.cboLocation .RowSource = StrSource .SetFocus .Dropdown End With
I need to populate a table with Grid reference values consisting of 6 figure integers, eastings and northings.
I am receiving/downloading the Grid Refs in a UK Grid Tile format, with 3, 4 or 5 figures preceded by letters.
E.g. SK 456 849, SP 6789 4356.
I have used some query functions and written a bit of VBA behind a form to convert the received coordinates into the full coords I want. The coordinates are now in unbound controls on a form, and I want to pass these back to a table so I can use the data for display purposes.
Ideally I want to link to the table from a GIS and autoupdate without having to open the database (my imported data is linked in to feed the database automatically).
I have done some searching and not found a method to pass the values into a table - What is my best way of doing this automatically?
