how to hide the the 'Details' section in my form when viewing it in Split Form. I tried to use
Code:
Private Sub Form_Load()
Me.Detail.Visible = False
End Sub
but that just makes the Details section look blank, as oppose to not having it there at all.
have only the Form Header and Datasheet visible in the Form View of my form. Similar to the 'Contact List' form in the Contacts Template that comes with Access.
I have a split form (frmPatient Schedules) that shows me my records in the datasheet view at the bottom section of the form. My records have a field with a checkbox (ckbxHOLD).how can I get the records that don't have their checkbox checked to be copied as new records to a different table (tblHome Visits)?
View 9 Replies View RelatedI prepared students details in access, but when i look the form view students particulars looks automatically (like name, age, weight and address). But what i need is students details has to come after I enter the name.
View 1 Replies View RelatedI am pretty new to VBA and I am having the same problem of hiding and un-hiding columns on a datasheet of a split form. I am building a system that will be used in front of customer and therefore wish to hide columns that contain cost sensitive data. The same forms need to be able to show the Sales Rep the hidden columns simply by ticking a box. Basically a toggle on and off of hidden columns.
I have been playing around with the code below (which i found in another forum) to hide the Field called COO when I click the tick box called chkHIdeFields check box. This works on a Single form but not on a datasheet of a split form.
Private Sub chkHideFields_Click()
' Note: vbTrue = -1
If Me.chkHideFields = vbTrue Then
Me.COO.Visible = True
Else: Me.COO.Visible = False
End If
End Sub
I have been able to hide the column of my split form by using the ColumnHidden property of the On Load event just as a proof of concept that the ColumnHidden property actually works to hide a column, which it does. This is the code that im using to hide the column called COO.
Me.COO.ColumnHidden = True
However if I then set it to = False and then close and open the form, it doesn't unhide the column. the only way I can unhide the column is to do it from the Form view via the un-hide dialogue pop up box.
I have two issues here, the first one is getting the form to recognize when to hide and when to show the column of the datasheet on the split form and the second is to get the code to for the check box method.
Lastly once I get it working for 1 field I need to be able to define a list of 7 or 8 other fields all at the same time.
I have a Split form displaying parts information and have all data displayed from the table including an obsolete field which is a Yes/No checkbox.
I want to display ONLY unchecked fields on a button click. I have tried this code so far but it didn't seem to have any effect
Private Sub cmdCurrent_Click()
Me.chkObsolete.Visible = Nz(Me.chkObsolete.Value, True)
Me.Requery
End Sub
Commands:
- cmdCurrent = show all unchecked fields
- cmdShowAll = show all fields
- cmdSearch = filter based on textbox entry
Other: There is also a hyperlink in each field (on the form only) to open each individual record for editing.
Field in question is chkObsolete
Command in question cmdCurrent
Is it possible to create a split form with spreadsheet view on top and when you click on any field in that line it shows a regular form with field information below?
View 3 Replies View RelatedI have a database i have been working on (access 2007). In the past I have been using a list box to select records. Now I would like to use the datasheet view or split form view. Everything seemed fine until I moved to linked tables.
My problem is, with the same query, the listbox is lightning fast at changing the recordsource.
When I change the recordsource on a datasheet view or split form, it takes... ages and shows "Calculating.." On larger recordsets it freezes access.
I tried searching, to no avail. I've attached pics to represent my issue a bit clearer. I have a form that I want to be my switchboard, but my clients all have different resolutions, and this is where I run into the problem. I want the switchboard to not only be maximized, but appear maximized.
Here is the design view: Linkage (http://www.martinaustin.net/images/issue_design_view.jpg)
Here is the form view: Linkage (http://www.martinaustin.net/images/issue_form_view.jpg)
I want the date and bottom line to always be at the bottom. This works fine by simply using form headers and footers. The issue is that the Admin button will appear near the center (vertically) when viewed on a computer with high resolution, instead of just above the bottom horizontal line as I intend.
Does anyone know of a way to fix this?
My table structure is
id photoPath name
1 C:a.jpg A
2 C:b.jpg B
How to show all image per row at report details section in a report like
ID Image Name
1 Here Image of A A
2 Here Image of B B
Working in Access 2007 - I would like to have an updatable calendar in the header section of a form, and when this is changed by the user I would like the subforms (there are several) in the details section to be updated with various appointments with dates corresponding to the date selected in the header.
View 3 Replies View RelatedI currently use
Me!frmPatientLookupResults.Form.Visible = False
to hide a subform on my form that is in the detail section of my form.
Is there a way to collapse or Hide the Detail section of the main Form??
I notice that their is a property under the Detail section called Visible
with an option for Yes or No.. How would I manipulate that option through
VBA? I am assuming that is the option that I am looking for
I have master and child fields in my query, and in my report I have blank controls where there is no child record to the master. I'm trying to set the section (Group Header and Detail) to be invisible when there's no value in a control.
However, as soon as I introduce an If statement to the VBA in a report, regardless of the event I put it in, it just stops working completely.
I want to add a section to my report and control the visible value based on page (1st, 2nd, etc...)
So:
1st page show 'Page Header' which has lots of detail, but dont show 'AccNum.Header' section.
2nd, 3rd, etc.. don't how 'Page Header' as I don't need lots of detail, but show the 'AccNum.Header' as this has customer name and Invoice numer, which is enough header information of all the rest of the pages.
Tried using 'On Page' and logoc aroung [Page] but no progress.
After reading many of the posts here, I decided that one of the problems with the tables in the db I was working on was in the primary keys. I had used the same field name as the primary key in all of my tables. This was RecipID, which was a user entered textbox with an example in a label beside it showing the format to use.
After reading stuff here, I decided this wasn't a good idea. So I changed RecipId to be an autonumber in the parent table (Household_Info) and a long integer foreign key in the children. Also, I added some fields to the parent table to identify the head of household (lastname, firstname)
I already had a continuous form made with a subform and a pop-up form associated with it based on my previous tables. Reran the query underlying the form, and the new fields showed up in the field list box for the form. The fields are all still present in design view, but I get a totally blank form in form view. I checked the forms recordsource and made sure that it was set to the new query.
Can anyone give me an idea about what I'm overlooking? Do I have to recreate the form?
(Sorry if this is a repeat of a question someone has already addressed, but I couldn't turn up any relevant threads after several hours of searching.)
Thanks, Charlotte
Hi,
I put a print command button on a form and found that it actually prints the form, pretty much as seen.
What I actually wanted was to print a report which takes all the details of the current record shown in the form, including subforms and tabbed pages.
That way, a user could navigate to the record by any one of several different fields (contract number, project title, project number, and various other ways projects are identified in the organisation I work for) and get a snapshot of the entire project for reference without having to print a report for all 250+ projects and then looking for the project of interest.
Thanks in advance.
Keith.
One of the fields on my form has ID field (can input either number, text, or both). It looks unprofessional when I am printing reports for ID because some are blank. How can I make that field to have automatic "N/A" when the field is blank? I put ="N/A" as Default Value but no use.
View 6 Replies View RelatedI am creating a dentist booking system and i need some way to display appointments today for a certain dentist and then from their to click the customer and view their teeth details that the dentist will use to update...
View 10 Replies View RelatedI made a form with a subform - in the form header it just has the title, in the details it has details about level 1, then in the footer it has level 2 with all records assigned to level 1's ID. My problem is in form view the detail section takes up half the page, I only need it to take up an inch or so. I tried dragging it in design view and it seems to work in design view but once i switch to form view it still takes up half the page. I also tried changing the numerical height for the detail section in properties but it wont change.
View 2 Replies View RelatedDespite Google I can't seem to figure this out.
I have some data in a format similar to:
Name / Style / description / speed / distance
john / driver / careful / 80 / 5500
mary / driver / careful / 70 / 7000
pat / racer / reckless / 100 / 6000
anne / driver / careful / 75 / 1000
peter / racer / reckless / 110 / 6500
don / snail / slow / 60 / 6000
I want my report to total by style, without details and to look like:
driver careful 13500
racer reckless 12500
snail slow 6000
How do you get a report to sum the group items by a specific item and to hide the details of that group summing?
I have got a form with summarised data (of records) on view for people to look at. (this is a continuous form). For each record I would like to have a button that displayed another form with more details on it. So by pressing the button opposite a particular record it would take the Id value of the record and open another form (with more details) at that particular record.
I would be very interested in seeing this done with a macro if possible but beggers can't be choosers!
Hi,
I have a couple of identical databases in Access 97, they have lots of forms. My users use the two different versions of this database, but linked to different sets of data depending on what they are doing.
I distinguish between the two versions by making the background colour of the log on and Switchboard forms different. It would be nice if I could cause the background colour of the other forms to match the Switchboard without having to go through and change each form individually.
Can someone please give me a clue as to how this can be done?
I know using Me.Detail.BackColor = RGB(100, 100, 255) would work, but I can't see how to a) get the RGB values from the Switchboard.
Regards,
Bernard D
I want controls on the left of my form, but when I do it this way and then print a record, it displays a big blank section.
How do I make the left side a non-print section for my controls?
I have two related tables
1 Donor and
2 Donations with fields date, donor, fund and amount
I want a form to display donation details in datasheet view of fund and amount for a selected date and donor...
When I right click a row on the data sheet side of a split form an select "New Record" I want the curser to go to the first field on the single record side. I've placed this in the OnCurrent but it did no good.
Code:
If Me.NewRecord Then
Me!Descrfiption.SetFocus.
End If
Any way to set the focus to the single form Side of a split form?
Hi there,
I am fairly new to access. I have searched high and low for help on this particular topic. Its something pretty simple, I just don't know exactly how to do it.
Basically, the user will have a client selected from the main form, when they hit the button to go to another form which has details on services done on that client at a specific date, i want the new form to have the clien'ts ID present and a fresh record present in which I can enter the date of visit, what was done, recommendation, etc.
Right now its popping the new form open with the client, but it displays the last record that was typed in that new form. Does anyone have any suggestions or ideas on this?
Thanks
I have stumbled through making a few new forms and tables for my new job, and have done alright so far (even if it takes me forever to do so), but there is one thing that keeps tripping me up. I just cannot figure out how to do it, even by looking at the designs and properties of other tables/forms.
Part of my form requires me to input location details. A table is setup with every City, State and Zipcode for usage on the form. Our old form was designed to auto-fill (is that even the right term?) the City and State fields upon entry of a Zipcode. These are all coming off the same table, and it works on our old form, but I cannot seem to replicate it on the new one.
I have 2 other issues with the form, and they are also both related to this auto-fill/auto-lookup hangup. Another table is set up with employee IDs, and their corresponding Last name, First name and Middle Initial. I'd like to be able to type in the ID and have the next field automatically enter the corresponding name. Similarly, I need to enter certain other data, and I would like the next field to fill in a short description of said data.
Can anyone help me or point me in the right direction? Like I said, I've pretty much made everything else work by learning from the designs of other tables/queries/forms we have, and by trial and error. But this final hitch seems insurmountable.