I have a database which has one main form linked to a table which has 325 records in it. The problem is when you open the form it says there are only 324 records :confused:
I have gone through the table comparing the records with the form records, I found what I thought was the 'missing' record. But when I did a find on the form I managed to retrieve the record.
Can anyone help as I'm a bit baffled.
Thanks
S
I want to use a column in a query to show where data is missing in other fields.
In excel I have used this statement:
=IF(COUNTA(I5:J5)=2,"","error")
Basically, I have two fields PRICE and WEIGHT. I want a column in the query to show 'Error' (or any kind of flag) when either (or both) of these fields are blank.
Hope this makes sence.
Any advice?
Thanks
I am having an issue with DLookup, which, for some reason which I do not understand appears to missing the first record in the table.
What I am trying to do is to extract the e-mail address of all users who have 'Admin' status to the database. In the table ('LogIn') there are 3 users who have 'Admin' status and this is confirmed by the DCount function in the following code. There respective ID values in the table are 1, 49 and 51.
Yet when I run the Loop to get all e-mail addresses it misses ID 1 and just returns records for ID 49 and 51.
I have tried changing other users status to 'Admin' and it finds them but always misses the first record.
Here is the code I am using:-
LastIDRef = 0
strToEmail = Null
strMailToAddress = Null
AdminCount = DCount("[ID]", "[LogIn]", "[LogIn].[Security Level] = 'Admin'")
Do
strLinkCriteria = "[LogIn].[Security Level] = 'Admin' And [LogIn].[ID] > " & LastIDRef
[Code] ....
I am new to access and I recently encountered a double click issue
My form loads perfectly on double click event but it shows the first record instead of selected record.
My search is based on a PersonID but each PersonID has different WorkID that I wish to display on double click but it always shows the first WorkID instead of my selected record
I have tried changing the filters in the form properties but it still doesn't work for me.
Here's my code:
Private Sub SearchResults_DblClick(Cancel As Integer)
DoCmd.OpenForm "WorkForm", , , "[PersonID]=" & Me.[Searchresults], , acNormal
End Sub
[Searchresults] draws information from my Query
Query information:
PersonID... WorkID... Type......Location
1234..........1............Paint .....Address A
1234..........2............Electric...Address B
1234..........3............Floor..... Address C
Hi,
I have a main form that displays records with a couple of sub forms and it also has a button to open another form which is based on the same table main table but different sub forms.
All I am trying to do is open the second main form by clicking the command button and to automatically display the same main record as shown on the first form before clicking the button.
Sounds simple but I can't find how to do it.
Any ideas appreciated........Stuart
Hello,
I have another question about ACCESS forms. With VBA, I want to change the record showing when I open a form.
I see there is a member "CurrentRecord" so I tried in the class module
Me.CurrentRecord = 2
I compiles but gives runtime error that is write-protected and cannot be changed. In the ACCESS help I read you could do it but HOW?
What should I do ( I am using ACCESS 97 ) ?!
Thanks in advance
Victor
PS : Is it true that VBA in newer versions of ACCESS has more features/functions etc?
Hi all,
Is it possible to open a form so that it shows the new record fields only? I want to create a form that only allows the user to enter data and not view any of the records in the table the form is linked to.
Cheers,
Matt
Hi,
I am currently working on a database and I'm using a form to view the records. A standard Access behavior is to show an empty record (new record) as the last one. is there a way to disable this "feature". I would like my form to display only the records, which are really filled with data and not show the blank one at the end??
Thanx in advance
Luke
I used a macro to record the date and time the current record was modified and show that information on a form - the information on how I did that is here: http://office.microsoft.com/en-us/a...0345351033.aspx
That works wonderfully, however I would like to add to this the user that modified the record.
Is there a macro code for this??
I tried setting the Item to read [UserModified] and the Expression to be User() however that did not work.
Any help would be greatly appreciated...
thanks.
i want to open a report but only showing the result of one record in a sub form,
i have a field that is on all rows of the subform,[click to run] and what i want the user to be able to do is double click on this field and it will open the report with only the record information for that row displayed.
I have a database with 2 tables: tbl_Client and tbl_Orders
I would like to sum the total from the sold products and show them in the form in a text field called 'Total sales" the data from the table orders appear as a sub form in the main form Client.
It would be great to have for each client appear the total sales in the form, but I'm not able to find the formula for this so the table tbl_Orders field "TotalPrice" will be sumed.
In a table I have three fields 1. City - which is a combo box linked to a query, 2. State - a text box, 3. postal Code - a text box
When i put them on a form I use the info selected in the City box to populate the info in the State and Postcal Code boxes.
The Control source for the city is SELECT tblPostcodes.ID, tblPostcodes.Pcode, tblPostcodes.Locality, tblPostcodes.State FROM tblPostcodes;
Then on the form i put the control source of the state box as =City.column(1) and Postal code as =City.column(3)
This works fine on the form- and the information is retained - but the datasheet view of the table does not record either the State or the Postcode data that was entered. Is this because I put the control source on the form and the table is not recognising it? if this is the case how do enter it from the table?? really confused...
When I add new records to the form and close the form, the tables are updated with the new records, but the new records don't show in the form (navigation).
View 14 Replies View RelatedI am relatively new to Access 2007, I am having an issue with a sub form not showing all the data from a table.
Basically I have 2 tables: Headers and Line Details, they are linked via an order number. The headers will only ever have 1 record per order number but there can be multiple records on the line details table.
I have imported the data into both tables. When I open my main form, all the data from the header file is all visable and all correct for all records. However when I look at the data in the sub form, it is only showing data for some of the records.
I have checked and the data is correctly linked, and if I change the "source object" to point directly at the table in the sub form it shows the record is there. When I point it back to my sub form it is blank.
I have a form based on a table and I just added 3 fields to the table. When I go to the form to add these fields, they do not show up in the field list. I've also tried creating a textbox and going to the Data Tab and choosing the data source but those 3 new fields are still not showing up.
How can I go about adding these 3 fields?
Thanks in advance
Okay so basically below is the table I'm linking to a list box, the field i'm focusing on is the 'Disallowed' field:
Now this is the form i'm linking it too:
As you can see the list box on the right is currently just showing the whole column under the Disallowed list, but I want it to show the specific country, obviously I'm using a single form template but the information changes depending on what country i'm on (I presume I need some kind of Query that uses whatever is shown in the Country box)
I was trying to use SELECT * from tblCountries where [Country]='"&forms!frmCountryDetail!Country&"'" but this is giving me an error from the [Country] tag so this isn't working:
I have a weird situation and I was wondering if anyone has had an issue with this. I have a record missing from a table. Normal Users are not allowed to delete records from the Form view. There is a blank record where the record should be. The auto number counts from 37, 38, 40. Record 39 is missing and there are blanks where it should be. The autonumber field is my Primary Key and it is blank just like the rest of the fields in the record. I know that the record existed at one time because one of the DB users has a report referencing that record. Any Ideas?
Thanks for the help,
Keith
Hi All!
I made a query that calculates the sum of from a table that contains defect types and numbers.
The problem is when after the inspection there's no defect no values will be entered in the mentioned table. And running the query the result is 'NOTHING'.
I tried to deal with this 'nothing' putting this in another query:
result: IIf(IsEmpty([QF_VISUAL_INSPECTION_sumdefect!SumOfdefect_no]);0;[QF_VISUAL_INSPECTION_sumdefect!SumOfdefect_no])
but it didn't succeeded in gaining '0' instead of the 'nothing'.
How could I cope with this problem?
Any help would be appreciated.
thanks
Hi,
In MS Access, Form
I want to set up that if there is missing value of the fields, then we cannot go to next record or exit the form when we click to do next action.
I tried to add the code in the After update event, or Exit event,
Example Code:
if (isnull([Zip]) or len([zip]) = 0) then
msgbox "missing"
[zip].setforce
end if
when I click to go to next record, or exit the form,
it give out message "missing", it work fines,
but, it still go to next record, or exit the form after the message.
How do I fix it? Thanks.
i have made a query.. when executed it returns 4 results..when i view the report however (made using the wizard based on that query) only 3 results are displayed..i then add a record to the database... the query returns 5 results.. and again the report only displays 4 results...i believe that the first record entered into the database is missing from the report.. but it is present in the query.. could i have accidentally deleted the first record from the report when i was altering the layout in design view??anyone come across this before?is there a general rule with reports based on queries that only display results with certain criteria or something??
View 9 Replies View RelatedI got a problem regarding query work week in database.
The database contain data of year 2006 and 2007. When i query about work week, some record is missing.
i wrote the sql statement as
SELECT * FROM TBL WHERE FORMAT(MYDATE, 'WW', 1, 2) = 1 AND YEAR(2007);
There is one record missing... which is 31/12/2006 record.
So any idea to eliminate this??
I have a fairly simple query to weed out all the records in our database that are missing vital pieces of infomation :
Code:
SELECT Contacts.Name, Contacts.Address1, Contacts.Address2, Contacts.Town, Contacts.County, Contacts.Country, Contacts.PostCode, Contacts.Telephone, Contacts.Code
FROM Contacts
WHERE (((Contacts.Address1) Is Null) OR ((Contacts.Address2) Is Null) OR ((Contacts.Town) Is Null) OR ((Contacts.County) Is Null));
Is there anyway to count how many fields are missing for each record ?
I have a report that is fixed at one page for one record. However, there is a subreport with many transactions ("CanGrow"=No). If this goes to a new page I have to close the report and start a new one. This all works fine, except for the last transaction - if the second-to-last transaction record is at the bottom of a page then the last one does not print.
Access seems to format the data, then it realizes that it won't fit on the page so doesn't print it. I am using record id number to know which transaction record to start the next report on, so when it gets to the end my logic thinks it has reached the end as the id number is the last one in the set.
How can I know if the last record has printed or not?
Hello All,
I have three tables: Employees, Gender, Diversity. Both the Gender and Diversity tables are one to many relationships with the Employees Table. I am trying to run a query that will output a count of all diversities and genders. For example:
Diversity-----Gender-----Employee Count
White----------Male---------------1
White----------Female------------5
Asian----------Male---------------3
Asian----------Female----------<Blank>
Hispanic-------Male-------------<Blank>
Hispanic-------Female----------<Blank>
I am trying to get all counts, even if the combination of diversity/gender is not in the employees table. I am going to use that information in a Crosstab query.
What I thought would work was do a Left Join For Diversity and Employee such as:
SELECT Diversity.[Diversity Description], Count(Employee.ID) AS CountOfID FROM Diversity LEFT JOIN Employee ON Diversity.ID = Employee.Diversity GROUP BY Diversity.[Diversity Description];
Then, do a Left Join for Gender and Employee such as:
SELECT Gender.[Gender Description], Count(Employee.ID) AS CountOfID
FROM Gender LEFT JOIN Employee ON Gender.[Gender ID] = Employee.Gender GROUP BY Gender.[Gender Description];
And then do a Union. But that doesn't work.
Any thoughts or comments would be much appreciated!
Thanks,
Jon
I am working on a database where the records are numbered sequentially. On a regularly basis, records will be deleted leaving a gap in the record number sequence. I would like to have my db recognize that a number(s) is number in the sequence and use the missing number (filling in the gaps) when a new record(s) is added until all spaces are filling and then to continue from the largest number sequentially.
View 2 Replies View RelatedI have a form and was wondering if it was possible to set it so that a user is not able to click the submit [Submitcmd] unless certain text boxes are filled (however SampleOuttxt needs to be able to remain blank).
View 5 Replies View Related