I have four forms named [Information Form], [Evidence Form], [Subject Form], and [Vehicle Form]. The Final Form is a Tabbed Form named [New Incident]. The tabbed form has four tabs, with each tab displaying one of the forms above. I also have a Print Command Button named [Print All] underneath the tabbed portion of the [New Incident] form.
Also, All of the four forms are set to data entry - yes, so that on open they will be clean and read for new record entry. I need the [Print All] button to do, just that, print everything that has or has not just been entered into the four forms, even if some are printed blank because they were not necessary for this particular report. One thin of note is that each form on the tab has a field for the "Incident Number" which will be the same for all four forms.
I wanted to print multiple reports using for loop but I am not sure how to start with.
This is basically my idea:
1. Create a hidden indicator, I name it txtHidden. 2. I have one table, there are one column for "report name". 3. I have one query, filtered the "report name" column according to txtHidden, criteria written in the design view. 4. Using For loop, browse through all the existing report. 5. Every loop, txtHidden will equals to every reportItem.Name. Query will run. 6. If Query is no result, dont open report, if query returns some result, open the report.
I wanted to code something as below, but I dont know what to put in the [Dont know what to type] field...
For Each [Dont know what to type] In Access.Reports [Forms]![frmStartup]![txtHidden] =[ Dont know what to type] .Name If DCount("*", "ReportQuery", "") > 0 Then DoCmd.OpenReport [Forms]![frmStartup]![txtHidden], acViewPreview End If Next
I have a report that is a summary of multiple records in it. What I have next to the record on the report is a button.I have report that are labeled:
rptIncident Summary rptIncident Report and a button labeled "open report"
I would like to click on the button and then it open the rptIncident Report with all the information, not just the summary. I will put a picture so you know what I am trying to accomplish.Is this a simple Onclick event with a where condition or what? Or does this go beyond to having something to do with VBA?
I've been trying to work up a where clause that is generated by a button click event on a report. The workflow that i'm trying to obtain is as follows:
1) A report is run to determine the remaining work orders that need to be processed. 2) A button that is placed on that report is to be clicked, taking the user to the form associated with that work order, so it can be processed.
What i've been able to do so far is capture the unique ID for the work order and then print that in a message box. I can then open the form.
What i haven't been able to accomplish thus far is to open the form to the correct work order.
Things I've tried : I started trying to use the macro with the search for record option and using the where clause. Not successful. I am a little more comfortable in using vba so i switched to that pretty quickly.
Code: Private Sub btnJobEntry_Click() 'GOAL: open the work order form to the correct entry 'METHOD: store the uniqueID to a variable, then use that in the open command's where clause Dim strJobID As String 'store the unique ID in the variable
[Code] ....
I've put the strJobID variable in both the filter and where clause sections of the DoCmd but it just opens the form to the first entry. I'm fairly confident i'm not applying the filter/where clause correctly by using the incorrect syntax.
I have a form with 2 cbo. I want query to show all data if nothing has been selected, or show specific data to whatever has been selected in cbo1 AND/OR cbo2.My query was working ok for couple of days and then stopped. I don't know why, as no changes has been made.
if both cbo are blank then it works OR if both cbo have a selected value then it works, ok. But it doesn't if one of the cbo has a value and the other one hasn't.
Code: WHERE (dAreaFK=Forms!F_MainMenu.cboStatsArea AND dShiftFK=Forms!F_MainMenu.cboStatsShift) OR (Forms!F_MainMenu!cboStatsArea IS NULL AND Forms!F_MainMenu!cboStatsShift IS NULL)
I have an update sql statement that isn't quite working properly.
My where clause has 3 criteria. *print = -1 *stDocCriteria (project_num and client_id)
Below is what the code looks like.
Code: updateSQL = "update tblTimedTasks set printed =-1, invoice_date = Now() where print = -1 and " & stDocCriteria
Add watch: so you guys can see "stDocCriteria"
Code: updateSQL = "update tblTimedTasks set printed =-1, invoice_date = Now() where print =-1 and ([project_num]= '140012' And [client_id] = 87)"
I want to only updates records that meet all three criteria. The above sql not only updates all records that satisfy stDocCriteria regardless if print is -1(true) or 0(false).
I have a report based on a query that has data for many dates. At the moment I have put a specific date in the criteria of the query so that I could build the report format. So it now displays all the data for the date i have in the criteria section. I will need to run this report several times per week so the specified date (and corresponding data in the report) will need to be changed to a new date when I open the report i.e. when I open my report I want to show data in the report only for a specified date.
Can I create a date parameter box open up when I open the report? Can I create a form with a button that when I click will open the report displaying data for that date? What would be the best way?I also need to display the specified date on the report.
I have a continuous form that displays a list of invoices (frmInvoiceList) based on an adjustable filter contained within the form. I have the filters working the way that I want them through VBa and I have a button on each record to open a report (rptInvoice). Inside that report, I have some controls to "print", "email", and "export to PDF". Again all that works just the way I want. The Form and the Report are based on a different query and each has an InvoiceID field to link.
What I am trying to do is put the Print, Email, and Export buttons on the main form which would perform the appropriate action for all the records that are displayed on the form. I've been able to get the Print function to work to a degree. It will print all the records, but it changes the background colors based on the alternating records. When I go to Email or Export, it creates a single file with multiple pages and each page is a new record, again with the alternating background colors.
Ideally, I would like to have a separate file exported for each record that can be renamed and archived separately. I'm not so concerned with the email function but if it would be possible to generate a separate report for each invoice, then pull the appropriate email address for the record, that would be really nice.
I've tried some "for" and "do" loops that I found through some Googling but none of the samples ended up working like I wanted.
I have a lot of reports I have created. A lot of them are the same report but with different criteria. Right now I just have a report form, which displays all of the reports with buttons and the user chooses the desired report, clicks, and bam. In an attempt to make this look nicer and cleaner, is there a way to use a couple of drop down menus to open the reports. For example, can I group them by the main report category, have a drop down, click on a desired report and it opens from there??
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean Private Sub Form_BeforeUpdate(Cancel As Integer) If Not bSaveClicked Then MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation Cancel = True
I have a form that the user can add Work Order numbers to a text box and pass them to a listbox to collect 1 or more values. Each of which need a separate report with the labour hours for each Work Order.
I am having issues figuring out how to get it to pass them to a query or filter the reports.
I have tried many different examples and nothing seems to work.
I am trying to pass a date range parameter & an additional parameter (Type of Audit) to 6 subreports based off individual crosstab queries and housed on one Unbound Report ("rptFinal").I have an Unbound Form "frmDate" passing a date range and Type of Audit using [Start Date] and [End Date] to rptFinal with a button that simply opens the rptFinal as follows:
In each Crosstab query, I have set the parameter criteria (in both the Parameter section & the query itself) to:
[Forms]![FrmDate]![Start Date] And [Forms]![FrmDate]![End Date] and also, [Forms]![FrmDate]![Enter Type of Audit]
On each subreports On Load Event, I have added:
Private Sub Report_Load() Me.Filter = "[DteAuditDate] BETWEEN #" & Forms!frmDate![Start Date] & "# AND #" & Forms!frmDate![End Date] & "#" Me.Filter = "[Type of Audit] = #" & Forms!frmDate![Enter Type of Audit] & "#" End Sub
and I've set the Filter On Load property to: Yes..I can open frmDate, fill in the date and Type of Audit, launch the report and it runs with no error, I have 6 blank subreports in report Preview. The headers are showing up but none of the data.
I have created a report which contains within it multiple sub-reports, which I use to generate a document for management meetings on a bi-weekly basis.
For each of these I have the subreports filtered to a unique number for consideration that period e.g. LIKE "88/00039" which relates to my data.
In order to change this I have to manually update each of the filter commands within the subreports but I assume there must be an easier 'catch-all' method of achieving this?
Ideally I'd be looking for a command prompt so I could enter just the number sequence e.g. "88/00040" and then enter this (via a corresponding macro or similar) to update the filter commands.
I am trying to add to a db I inherited. One of the end reports that is produced is a cost breakdown for each end user.As things stand, the data collates into individual reports which are then grouped into one file and saved via PDF. What I am trying to work out is whether or not I can selectively pick some of those reports to have more than one copy.
I see a form (within an existing form) that will list all of the end users for a particular scheme and, next to that, be a dropdown that will allow the db user to select how many copies of each report needs to be published. These will then collate merrily into one document to be saved to PDF.
I have a queries that do all the calculations and dumps the output to Query X for all different types of customers. At the moment I am required to generate a report for each of the customers and send it to them, manually.
End Goal:Initiate a Macro (at a given time at a given frequency) that would run a process to generate different reports for all different types of customers using a standard report template. I am also trying to avoid having to create a report for each customer (as the customer base grows, the report count will grow) so looking at something that would look into Query X and generate # of reports depending on number of customers.
Every month, I create 15 individual reports with each report filtered by two fields, let's say Dept and Exec. You change Dept and Exec via a combo box drop down based on a table, and this information is passed to the query behind the report. Now, I repeat this process for every report. I use an unbound form that gathers the "Title", which is the Dept Name +"Special Report"; report Date using "as of" [DATE], and an updated through [Second Date].
Each monthly set of reports is sent to a new directory and folder (i.e. M:MOR Reports2005January. This changes each month. Somehow, I'd like to automate this where each report prints with its name to a newly created folder in pdf format.
I have been reading prior posts and am coming up with some ideas like adding a "selected" field to the Dept/Exec table and then step through those selected records to determine which report you are running. It takes a long time to print these to pdf in a new directory every month.
Hello. Is it possible to close all open reports from one button on a form?
The form is a popup that appears if there are no records in a report. When the popup appears, and the user clicks OK, it is running a macro that closes the popup form and then the report. I would like to use this popup form for a number of reports, so obviously the macro cannot be used as it is only for one report.
Using one form with multiple combo boxes on the basis of which am trying to generate a report. Below is the code I've put in a command button (in Form) by which I want to generate a report....FYI - both combo boxes have text value...
how to print mutiple "invoice-records"..I want to print multiple times the same report but with different values ex. invoices (based on a query). I have the report and the queries ready but how can I automate this task?
In my report I have a field called "Packages" and my subreport consists of a table, one of the columns is "Packages" so I want to use the value that I have in "Packages" to filter for only those items in the sub report.
How to open the regular filterdialog (with the checkboxen for the different values) in a report with VBA. With the regular filterdialog I mean the one you get when you select a column and then push the filterbutton.
I was wondering if any of you would be able to help me out. I'm trying to get a button on an access form to open crystal reports and pass two parameters through to it from controls on the access form.
This is what I have at them moment: Private Sub openRpt_Click()
Dim selForm As String Dim CrystalReport1 As Crystal.crystalReport Set CrystalReport1 = CreateObject("crystal.crystalreport")
CrystalReport1.Connect = "ODBC;UID=ID;PWD=PW;DSN=dsn;Database=dbname" CrystalReport1.ReportFileName = "O:DatabasesCReportsSingle Project Up To Burn Rate.rpt" 'CrystalReport1.WindowTitle = "Single Project Up To Burn Rate" 'CrystalReport1.WindowMaxButton = False 'CrystalReport1.WindowMinButton = False 'CrystalReport1.WindowState = crptMaximized
I want to make a simple FrontEnd for my database for users to open reports to print them. I don't want them to mess with the linked tables or queries feeding into those reports. I want the front end to display a list of every report in the database that they can load up and use.
