I have two tables each with an ID field (autonumber/PK/No Dup etc).
I want to append two fields from one table to the other table. I have set up an Append Query to do this but it won't work - I get the following error - "The INSERT INTO statement contains the following unknown field: 'FiID'...."
Where would you put the INSERT INTO statement in a query? Would it go after the select statement but before the From statement or would it go at the end?
View 2 Replies View RelatedI want to create a append query in access 2003 to insert data into an existing table from Excel workbook.My Table name is TokenDetail in Access 2003.
And Excel File is TokenCreation.i want to create query with msg box and requered file path for data becuase my excel files have various path and name.
I have two tables "TABLEA" and "TEMP"
fields in both tables are
Cust ID (Primary key)
Cust Name
Address
Cheque No
Amount
Location
Zone
I need query when i click on command button on form
if "Cust ID" which is primary key in "TEMP" Table match with "Cust ID" from "TABLEA"
It will update the record in "TABLEA" if not then append the record
I want to insert an if statement in Access report that states.If the interviewer field is not null them put in the interviewer. If it is null then don't put anything.I have 5 of the interviewer fields and don't want empty lines in the report.
View 1 Replies View RelatedIn my statment below the ID is an autonumber. I placed it in the first part ofthe SQL string..but not where I have to variables referenced...
I have to add it to the SQL statement...Its not a varible although I can make it one by getting the largest number nad adding one...
Do I have to make it a non-autonumber and do it like I said above
Or is there another way to treat the autonumber (ID) in the SQL INSERT INTO statement...
THanks
Code:MySQL = "INSERT INTO dbo_data ("MySQL = MySQL & "ID,Name,Owners_Residence,Notice_Expiration,Notes,N otice_Number,Status,Notice_Date,Property_Address,N uisance_Type,Addition_Name,Range,Lot,Block,Zip_Cod e,Display_PID,Sec_tion,Township,Property_City,Prop erty_State,Property_Zip"MySQL = MySQL & ") values ("MySQL = MySQL & "'" & varName & "','" & varOwners_Residence & "','" & varNotice_Expiration & "','" & varNotes & "','" & varNotice_Number & "','" & varStatus & "','" & varNotice_Date & "','" & varProperty_Address & "','" & varNuisance_Type & "','" & varAddition_Name & "','" & varRange & "','" & varLot & "','" & varBlock & "','" & varProperty_Zip & "','" & varDisplay_PID & "','" & varSec_tion & "','" & varTownship & "','" & varProperty_City & "','" & varProperty_State & "','" & varZip_Code & "'"MySQL = MySQL & ");"
I have a form with many fields and one field has an OnChange event to run an insert query or log an entry in a table about the change. I get insert entry written with everything except one field.The OnChange event code is:
Code:
If AddressStatusFld = 2 Then
'If it has changed from Current to Non-Current create a Contact Log entry for this matte
If (Val([MatterShortNoFld]) Mod 2 = 1) Then
Me.OperatorFld = 16
[code]....
I just can't work out why the record in MatterContactsMade table has a null value for the field Operator.
what is wrong with the following statements. I'm new to access SQl. This would work in ms sql.
Code:
DELETE from Table1
INSERT INTO Table1(email, productid, datecreated, datesend) values ('adf', 5, '10/10/2012','10/10/2012')
Select * from Table1
I have a field that is giving me the number of business days between a period of time and then I want to subtract that number - the person's PTO time to see the actual days they were available...when I simply type the number in (see below) it works great but I want to set up a prompt that will ask me how many PTO Days to calculate as it will be different for each person I am quering...is this possible?
View 9 Replies View RelatedSQL stored procedure which is simple INSERT statement on a single table 'tblSOF'
Code:
-- ================================================
-- Template generated from Template Explorer using:
-- Create Procedure (New Menu).SQL
--
-- Use the Specify Values for Template Parameters
-- command (Ctrl-Shift-M) to fill in the parameter values below.
[Code] ....
I am stumped with the following error.
Error: Msg 102, Level 15, State 1, Procedure InsertINTO_tblSOF_sp, Line 80 Incorrect syntax near ')'.
I am using an append query to move data into another database. One of the fields being imported is a date field in text form (20141201). I need it appear in the final database in text form (01/12/14) I have tried using several date conversions and cant get this work. Ideally i need the final value as a text rather than date.
View 8 Replies View Relatedis possible to run an Append Query and update a field at the sametime?
i.e. I would like the MealDate field to be incremented by 1, just not sure how to write the code within the query!!!
This is what I have so far!!! not working
MealDate: ([MealDate](Date()+1))
I want to set a table field's default value to whatever is displayed in a certain field on a certain form at the time.In other words, say I have a database with a table called TABLE1, and two fields called NAME and SCHEDULENUMBER. I have a form called CreateSchedule with a SCHEDULE NUMBERCONTROL form and a NAME form, and I can enter names onto it, and it records to the proper SCHEDULENUMBER. So if I pull up SCHEDULENUMBER 4, and add three names, when I go back into TABLE1, I can see those three new names, and each one has the SCHEDULENUMBER set to 4.
What I'm trying to do is write an APPEND QUERY to copy a list of names from a different table, and paste them into TABLE1. The problem is that the other table doesn't have a SCHEDULENUMBER field. What I want to do is put a button on the CreateSchedule form that runs an APPEND QUERY, and sets the SCHEDULENUMBER to whatever value is displayed on CreateSchedule's SCHEDULENUMBERCONTROL field.
I tried setting a default value in TABLE1's field properties for that SCHEDULENUMBERCONTROL field, but I keep getting error messages. I just want TABLE1, whenever I add a new record (regardless of how I add the record: manually typing it or clicking the append query button) to look at the form CreateSchedule, and set it's own SCHEDULENUMBER field to whatever is displayed in CreateSchedule's SCHEDULENUMBERCONTROL form.
I'm trying to make a nested if then statement in a query field, and I can't figure out why I can't get my formula to work:
Volume: IIf([MethodCode]="K",[total]*12.54*0.026873,IIf([MethodCode]="S",([length]*[width]*[depth])/2,IIf([MethodCode]="M" And [Location]="SH",[total]*5.08*0.026873,IIf([MethodCode]="M" And [Location]="C",[total]*18.58*0.026873," "))))
I keep getting the "data type mismatch in criteria expression" error. If I separate out all the individual if then statements individually, they work. But if I connect them all as a nested if then it doesn't work.
I am giving two tables and I need to create a macro that automatically updates these tables depending on the value of a Yes/No field. If it's No, it's in the 1st table TableOne, if it's Yes it automatically updates to TableTwo.
So, the best way I saw to go about is to set up an append query and then create a macro that runs it
So my tables have the values FirstName, LastName and isValid (more but keeping it short)
So for my append query, I put TableTwo in the pop up I get. Then, where it asks for the field I put it
Field:FirstName
Table:TableOne
AppendTo:[TableTwo].[FirstName]
Criteria:[TableOne].[isValid] = 1
I do this for all (it was autocompleted except the Criteria field). I tried to keep Criteria with data only for isValid but that didn't work. I wrote it for all the field names, still didn't work. Whenever I click run it says it'll append 0 rows.
I have a database where I am pulling my data in my subform from a tbl made by a make table query. However, Once a month the data will be updated and sorted by "Retrieve Date". I have made a function through a module that updates the queries with the latest retrieve date everytime new data is pasted into the database.
I am looking for a way to make the make table query only update the new data and not post records into the tables more than once. Should this be done by writing an IIF then statement and using an append query? I will copy the SQL code from my make table query below.
SQL:
SELECT qrySummary.CounterpartyName, Format([CDSsprd],"Standard") AS CDSspread, Format([Gsprd],"Standard") AS Gspread, Format([RatingsGrade],"Standard") AS RatingGrade, Format([BloombergCDS],"Standard") AS BloomCDS, Format([Avgerage],"Standard") AS [Avg], qrySummary.RetrieveDate INTO tblSummaryQry
FROM qrySummary;
Hi,
Have two controls GroupID and Shift which are linked with Criteria:
SELECT tblShifts.Shift, tblShifts.GroupID
FROM tblShifts
WHERE (((tblShifts.GroupID)=[Forms]![fmPersonalDetails]![GroupID]));
Have two other controls which are Position and Grade with same type of link.
Problem is When I try to edit the Shift control an error message comes up saying 'cannot edit bound to unknown field 'Shift'.
Have checked each of the property fields with the Position and Grade controls and are the same. Spelling is the same in the table. Are there any other obvious things I should be looking at because I'm pretty new to this and cannot find the solution.
Would be grateful for some input/suggestions.
Hey guys, I am trying to input data into a form, the form consist of mulitiple tables. Once I set it up I get a "#Name?" error in the text box, and when I try to input data into the text box, at the bottom of the form it keeps saying "control can't be edited; it's bound to unknown field 'FieldName'."
Can anybody help me with this problem?
Thanks
I have lookup table I use to return names for various "Sales Class" codes.It all works good but if there is a code that isn't in the lookup table it leaves that field empty.I want it to return the word "Unknown" for any code that doesn't have a match.Here is the SQL:
Code:
SELECT [Data1].OrderNum, SalesClasses.[Name]
FROM [Data1]
LEFT JOIN SalesClasses ON [Data1].[Sales Class] = SalesClasses.[Code1];
Table examples:
Data1:
OrderNum - Sales Class
111 - class1
222 - class2
333 - classX
[code]...
Hi everyone,
I've inherited an access database with a multitude of functions and am trying to make heads or tails of a particular one. I'm wondering if someone can decipher what the results of the following does.
SELECT [table2].ORDER_NO AS Expr1
FROM table1, table2
WHERE (((IsNull([table1]![ORDER_NO]))=-1))
GROUP BY [table2].ORDER_NO
ORDER BY [table].ORDER_NO;
My issue is with the where clause.
The way the DB is used limits my capabilities of running tests. For instance, Table2 is populated only at certain times (batch files insert data into it while processing and then clears it).
That being said. What I get from the where clause is that
- the result of ((IsNull([table1]![ORDER_NO])) must be = -1 as the criteria
I'm just not sure what ((IsNull([table1]![ORDER_NO])) translates to.
Any help would be greatly appreciated,
Tar
I am trying to do something like MySQL's LIMIT with access. I'm getting an error that I don't understand with the following query:
SELECT TOP 30 * FROM Entries WHERE Id NOT IN ( SELECT TOP 15 * FROM Entries ORDER BY Id DESC ) AND Static = False AND Authorized = True ORDER BY Id DESC
Any ideas?
When I open a query whether by double click or command button, the following error appears
What does it mean ?? this error appears sometimes not always. I can't figure out what this error refers to, as long as there no any error description or code.
Hey guys-
I have a 'Master Table' that holds all my imported records. After a few queries and whatnot- I need to break it down into specialized tables. For example- my Sales Associate info goes into one table (all their contact info, employee code, etc)- while the product info goes into another table.
As I import daily orders and whatnot- it also brings in the sales associates info. So, I want to have Access check the existing SalesEmployee Table for any existing records (by their employee code)- and if it doesn't exist, append it into the table. HOWEVER- if they are already showing in the SalesEmployee Table, I want it to check to see if their contact info is the same- if not, update it with the new info I am importing.
How do I go about doing this? Is this an update query all by itself? Or, do I need a more complex if/then statements and whatnot?
Thanks!
I created an update query to a text field in a table. However, it inserts the data at the end of the string and I need to insert it at the beginning of the string that already exists. How do I move it to the front instead of the end?
This works but puts it at the end:
[Field Name] & "BlahBlah"
I am trying to make a query that outputs the minimum "Need Year" AND ALSO if the need year was equal to 9999 it shows "NO DATA".
This is what I have so far for checking the minimum value:
field: Need Year: MinofList(PMS_output!pqi_ny,PMS_output!iri_ny,PMS_ output!sdi_ny,pms_output!sai_ny)
I am not sure if I should be putting it in the criteria to check whether this minimum value (need year) equals to 9999 or not and if it does, it says "NO DATA" instead of 9999.
I am working on a hired plant database and want to limit the combo box on the hired form to only list items not on hire.I thought I could do this using the IssueDate and ReturnDate fields within a query with an IIf statement forcing the Yes/No field to choose Yes when there is a date in the IssueDate field and No when the ReturnDate field has a date entered.
View 14 Replies View Related