A Newly Placed ISA Server (2006) Is Not Allowing My IP Phones Register To A Remote Proxy Server Outside My Network
Apr 22, 2008
Hi all,
I am having seriuos problems getting VoIP traffic into and out of my network via the ISA server which we just newly installed.
My network topology is such that the phones i am using for the VoIP service, sitting inside my network and behind the ISA server, have to register to some remote proxy server outside my network and as soon as it registers i can begin using the service. The VoIP service is on the platform of SIP and uses udp ports 5060 and 8080.
I have permitted the necessary ports on the ISA server for the service being UDP port 5060 and 8080 but still cannot get my VoIp traffic through the server.
Please i need some help here as regards something i am supposed to do or something i am not doing right on the ISA server to permit my traffic.
I am a newbie to this Microsoft ISA server and i hope you all understand
Thanks in anticipation to your replies.
Leonard.
View 1 Replies
ADVERTISEMENT
Feb 13, 2008
I have a VB.net app that connects to a remote SQL server via TCP/IP. Most folks can connect just fine. However some enterprise users are in a corporate environment that will only allow connections through a corporate proxy server.
The VB app does the connect to the remote SQL server via a fully routeable IP address over port 1433, implemented via a series of table adapters.
Having no such experience, I have no idea what I need to do to my app to allow it to connect THROUGH a proxy. And what sort of interaction I will personally need to have (if any) with thier IT department to configure the proxy server in any way. The user mentioned that "Only permissible outbound connection is through proxy server and it is only allowed with TCP/IP port 80 and it is only possible by authenticating with Domain ID and password." I would assume that means the connection from the VB app to the Proxy server is over port 80 and that somehow the proxy server will know (or be told) to then route to IP address of the SQL Server over port 1433.
I realize that one possible solution would be to create a WebService that runs on the same machine as the remote SQL server and have the app connect to that. However that will require a lot of rework on the application. We are looking into doing that, but right now I need a short term fix that does not require such a major rework.
Can anyone offer any insight or links that might point me in the right
direction?
Thanks!
Gary
View 4 Replies
View Related
Jan 5, 2007
I have a website I'm ready to test on the server it will call home. I just got connected to the remote SQL server that it will be using. As I've been creating the site, I've been using the default SQL Express set-up in Visual Studio. Is there a way to have Visual Studio create all those default tables, procedures, etc. OR is there a way to copy all of that stuff from the SQL Express running on my machine to the remote SQL Server 2005?
-Mathminded
View 4 Replies
View Related
Dec 10, 2007
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
View 3 Replies
View Related
Jul 2, 2007
hi
i added 2 databases to my SQL server on a machine next door using Microsoft SQL server management studio express... I made sure that the server allows remote connection
then from this computer i pass a connection string to my SQLCLient in VB2005 that looks a bit like this
Code: ( text )
ConnString = "Server=USER-PTDH8Z5ESHSQLEXPRESS;Database=FSS.MDB;Trusted_Con nection=True;User Instance=True"
for which it gives me this error when i open the connection
SQLConnecton.Open()
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
at System.Data.SqlClient.SqlInternalConnection.OnErro r(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndW arning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.Att emptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.Log inNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.Ope nLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ct or(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateC onnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.Creat ePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateOb ject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCrea teRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConne ction(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetCo nnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenCo nnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Flying_School_Scheduler.DBEngine.StartConnection() in
whats the big idea?
i'm in a bit of a tight schedule here... can anyone help me here? ??
View 3 Replies
View Related
Dec 18, 2007
I'm green on this networking stuff so any help is greatly appreciated.
I have setup my home computer as a server and assigned a static IP to it. I installed SQL Server 2005 Developer and allowed remote connections to it through the Surface Area Config tool, added port 1433 TCP and 1434 UDP to firewall's exception list, and started the SQL Server Browser service.
Now I can't seem to remote connect to this SQL Server from my office network. Is there something I'm doing wrong here?
Thanks!!
View 3 Replies
View Related
Apr 18, 2008
Hi All,
I installed full version of SqlServer 2005. Iam able to Connect to all the systems that are in Intranet. But iam not able to Connect to the external systems (or) remote Connections. I followed all the steps that are in the following URL support.microsoft.com/kb/914277
Still iam getting the problem. Show me a way in this issue.
Thanks&Regards,
SrinivasReddy
View 3 Replies
View Related
Mar 3, 2007
TITLE: Connect to Database Engine
------------------------------
Cannot connect to FRI-0503SQLEXPRESS.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I have recieved this error and i have changed the surface area configuration to allow remote connections but it still won't allow them after i start and restart the server service. is there any way to fix this i have reinstalled several times and that has not yet fixed the problem either.
View 5 Replies
View Related
Mar 3, 2007
TITLE: Connect to Database Engine
------------------------------
Cannot connect to FRI-0503SQLEXPRESS.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
this is the error message i get and i don't know how to correct it. i have tried going into surface area configuration and setting it allow remote connections but that hasn't changed anything. i am at a loss for how to correct this situation.
View 1 Replies
View Related
Apr 18, 2008
Hi All,
I Installed full version of SqlServer 2005. Iam able to connect to all of our systems which are in intranet. But iam not able to connect to external system. I performed all the steps that are mentioned in the following URL support.microsoft.com/kb/914277 . Even then i was not able to connect to the remote systems. I request you to show me a solution to this issue.
Thanks&Regards,
SrinivasReddy.Tadi
View 1 Replies
View Related
Aug 29, 2006
Is there a way to automatically setup SQL Server Express to allow remote connections during the installation process?
We are deploying SQL Server Express with our application and I really can't ask SMB customers to go through a series of rather complicated steps after our "turn key" setup installs everything in order for any of the other computers in their office to connect.
What's the reasoning behind that, anyway? Why create a database server setup which by default doesn't allow anyone except the server to access it? I guess that makes sense for ASP.NET but the web fad isn't the only platform developers use these days.
Any assistance would be greatly appreciated.
Cheers,
Evan
View 1 Replies
View Related
Aug 22, 2007
Hi all,
I have SQL Server Express and VB 2005 Express installed in a Microsoft Windows XP Pro PC that is a terminal PC in our office Network. My Network Administrator has granted my terminal PC for Administrator Use. I tried to do the ADO.NET 2.0-VB 2005 programming in my terminal PC and I could not get a remote connection in the Window Form Application via Window Authorization. I do not know how to make this kind of remote connection in my Network. Please help and advise.
Thanks in advance,
Scott Chang
View 6 Replies
View Related
Sep 19, 2007
Hi all,
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC.
1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'Create a command to create a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "CREATE TABLE FromExcel (" & _
"FirstName nvarchar(15), " & _
"LastName nvarchar(20), " & _
"PersonID int Not Null)"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
'Create a command to drop a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "DROP TABLE FromExcel"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
'Declare FromExcel Data Table and RowForExcel DataRow
Dim FromExcel As New DataTable
Dim RowForExcel As DataRow
FromExcel.Columns.Add("FirstName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("LastName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("PersonID", GetType(SqlTypes.SqlInt32))
'Create TextFieldParser for CSV file from spreadsheet
Dim crd1 As Microsoft.VisualBasic.FileIO.TextFieldParser
Dim strPath As String = _
Microsoft.VisualBasic.Left( _
My.Application.Info.DirectoryPath, _
InStr(My.Application.Info.DirectoryPath, "bin") - 1)
crd1 = My.Computer.FileSystem.OpenTextFieldParser _
(My.Computer.FileSystem.CombinePath(strPath, "Book1.csv"))
crd1.TextFieldType = Microsoft.VisualBasic.FileIO.FieldType.Delimited
crd1.Delimiters = New String() {","}
'Loop through rows of CSV file and populate
'RowForExcel DataRow for adding to FromExcel
'Rows collection
Dim currentRow As String()
Do Until crd1.EndOfData
Try
currentRow = crd1.ReadFields()
Dim currentField As String
Dim int1 As Integer = 1
RowForExcel = FromExcel.NewRow
For Each currentField In currentRow
Select Case int1
Case 1
RowForExcel("FirstName") = currentField
Case 2
RowForExcel("LastName") = currentField
Case 3
RowForExcel("PersonID") = CInt(currentField)
End Select
int1 += 1
Next
int1 = 1
FromExcel.Rows.Add(RowForExcel)
RowForExcel = FromExcel.NewRow
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////
I got the following error messages:
SecurityException was unhandled
Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")."
Troubleshooting tips:
Store application data in isolated storage.
When deploying an Office solution, check to make sure you have fulfilled all necessary requirments.
Use a certificate to obtain the required permission(s).
If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list.
Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Many Thanks in advance,
Scott Chang
View 3 Replies
View Related
Nov 20, 2007
I am having all kinds of problems publishing report server through ISA Server 2006. Are there any guidelines? My biggest problem is that the browser returns an error page that says ISA Server is configured to reject requests that require authentication even though I have configured ISA and the default website to allow anonymous access and require no authentication in the web listener or the firewall policy.
I have a policy that maps an external IP to the default website which has a private IP - 192.168.1.203. I have an A record in my DNS for the external IP. So, I should be able to goto http://MyReportServerSite.com/Reports/Home.aspx. NO GO! Any ideas? I have configured many other web listeners/policies for other sites and they all work fine. I've done this at least twice.
BTW, thanks to MS for the myriad of myriad of dialog boxes, property pages, dropdown lists, check boxes, etc. ad infinitum for configuring ISA Server 2006. I can't even begin to imagine calculating all the permutations... Each iteration of the product seems to get more complex. :-( Hep me, hep me pleeeease!
View 1 Replies
View Related
Aug 6, 2001
Hi,
when i am trying to connect SQL Sever through Pxoxy server , i got the Error,
How to resolve it
Regards
Atul
View 1 Replies
View Related
Dec 3, 2007
I want to create a database on my local machine and work with it. But I am not able to see the name of my local server under "Database Engine" in the list of "Registered Servers".
Options I tried:
(1) In Registered Servers window, On Database Engine, I right clicked and in that selected "Update Local Server Registration"
(2) In Registered Servers window, On Database Engine, I right clicked and in that selected "New" -> Server Registration.
In "New Server Registration" Window, in "Server Name" drop down I clicked "Browse for more" but still in "Browse for Servers" window, I am not able to see the name of my local server in "Local Servers" tag under Database Engine.
(3) If I do File -> Connect Object Explorer -> Connect to Server window in "Server name" drop down box, if I click "Browse for more", I am able to see local server name eg. "XYZ" under Analysis Services, Reporting Services, and Integration Services but not under "Database Engine"
Please help me create a new database engine in SQL Server 2005 or list my local server under "Database engine" ?
Thanks
View 9 Replies
View Related
Feb 23, 2002
Hi,
I am really new to SQL Server. I have trying to create/register a server. I came to know that I need to go to Query Analayser and then register a Server. Then in Enterprise Manager I need to register a Group. I did everything.
But...
Here is the error.
Unable to connect server.
Server: Msg 17, Level 16, State 1
[Microsoft] [ODBC SQL Server Driver] [Shared Memory]
SQL Server does not exit or access denied.
I really appreciate if u can give me steps. Thanks, Padma.
View 3 Replies
View Related
Mar 18, 2007
I have been trying literally for months to get SQL Server 2005 Express to work on my Dell Dimension WinXPPro machine. I have installed and reinstalled both the server and the 'Management System'. I have shut down and restarted all of the related Local Component Services on my machine (with the exception of the SQL Server Active Directory Helper which will not start ??).
I have reviewed much of what is in this Forum related to SQL Server 2005 Express and I find that many have had similar problems. When a connection is attempted, the following message or some minor variation appears:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
In desparation, and at the suggestion of one of this forum's moderators, I went to try to download the SQL Server 2005 Express, Service Pack 2. I threaded my way through what I felt was an unecessarily complex set of links and finally reached a download site - but it was unclear whether or not the service pack was for SQL Server 2005 or the Express version. Giving up in dispair, it turn to you (once again BTW, I received no real help with this same question about a month ago).
Even though I seriously doubt if anyone will help me, I am willing to give it another try - mainly because I am home sick with the flu and having nothing better to do on a Sunday afternoon.
Thanks
View 6 Replies
View Related
Mar 21, 2007
in footer of my report i show a current date by this
=Format(Today(), "d")
as a result i gave those
3/21/2007
but wont date like this 03/21/2007
How ?
View 1 Replies
View Related
Apr 10, 2006
I'm happyguy and this is the first time to post my problem. Thanks a lot
here is a SQL query that I know how to write in Oracle, which is
Select * from AttandanceRecord where date like '%__/Apr/2006%'
but, now i'm developing my system with using Ms Sql Server 2000, so I don't know how to write a query with same output as above...
Please, can somebody help me??
View 6 Replies
View Related
Oct 12, 2007
Hi all -
We are planning to use a 2-node SQL Server 2005 cluster as part of a new Biztalk 2006 project, and I would like some advice regarding SQL Server service packs and editions.
Testing has already been running for some time without problems, but the test environment (a) is not clustered, (b) is using SQL Server 2005 Standard Edition rather than Enterprise and (c) has neither of the SQL Server service packs installed.
As this is a major project for us, my instinct would be to use Enterprise Edition (maximise performance and scalability)
and to apply SP2 (because I thought it was best practice to be up-to-date). I would have liked to do this before we go Live so we don't run the risk of having to change afterwards if we hit a problem.
Understandably, the project guys' perspective is this: testing so far has not been affected by SQL Server bugs, and we should go Live with the environment we have tested in, albeit with the planned 2-node cluster which is seen as a 'must have'.
I have trawled Books Online, Technet and other resources without success, so any thoughts or info on required, recommended or preferred combinations of Biztalk 2006 with SQL Server 2005 editions and service packs in a clustered
environment would be greatly appreciated - thanks!
Michael
View 5 Replies
View Related
Aug 25, 2007
Can someone assist? I'm using the applciation Project Portfolio Server 2006. Have reporting services setup and when I try to create a custom report this is the error I receive:
The report server cannot process the report. The data source connection information has been deleted. More Info: http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsInvalidDataSourceReference&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=9.00.2047.00
Also does anyone know of a good location for information on troubleshooting Project Portfolio Server 2006? Can't find much good documentation.
Thanks, Julie
View 1 Replies
View Related
Feb 22, 2001
Hi
We have a situation where we run two instances of SQL server 7.0 on two separate machines. These are both administrated from one computer using the Enterprise Manager.
Now we want to be able to run queries (via query analyser) from our administration machine on an Sql server 6.5 computer running on a different part of the network. Enterprise manager from version 7.0 seems to find the SQL 6.5 server but is unable to register that server. Is this in any way possible?
Thanks
TS
View 2 Replies
View Related
Jul 28, 2007
Hi all,
What is client network and server network alias in SQL server.
when and why we should use that mean what is the requirement of ALIAS in SQL Server.
Thanks
View 5 Replies
View Related
Mar 2, 2004
Hi,
Iam learning asp.net myself .
I've installed SQL Server7.0 in my PC.
How will I register a server
for example: localhost using enterprise manager.
I keep getting error message:
Specified SQL Server not found
Please help with registering a server.
Thanks
Abi.
View 1 Replies
View Related
Mar 23, 2000
1)I AM NOT ABLE TO REGISTER MY SERVER (S1) WITH ANOTHER SERVER (S2),
BUT AT THE SAME TIME I AM ABLE TO REGISTER SERVER (S2) FROM MY ENTER PRISE MNAGER.
WHAT COULD BE THE PROBLEM?
IF ANY KNOW PLEASE SUGGEST
THANKS
View 3 Replies
View Related
Jul 8, 1999
When converting from 6.5 to 7 the Servers I had registered under 6.5 were still available. When I try to connect to them the old 6.5 Enterprise Manager starts up and I really like this ability.
I would like to register a new 6.5 Server while running 7.0
I'm developing on 7.0 and thus would like to keep my machine running 7, but need to add 6.5 servers on occasion. Any suggestions.
(I think if I switch to 6.5 and register that will work, but don't want to switch)
View 2 Replies
View Related
Aug 7, 1999
I loaded a microsoft SQL server training CD. When i go to enterprise manager i am prompted for a server. I checked the online books and it says that i should use the compter name. This does not work. My dialog box that i am using to enter the computer name, logon ID, and password is titled connect server. The documented information has Register server for the title of the dialog box. Is there a difference? What am i doing wrong? I am not able to connect the server at all. This is a training disk and is only good for 120 days. I am running out of time and i have not even started.
Any help would be greatly appreciated.
View 2 Replies
View Related
Jul 14, 1998
Really would like some help from anyone who has experienced this problem.
I installed SQL server v6.5 on my machine. I selected communication options TCP/IP and Named Pipes and took all the other defaults. After receiving the `installed ok` message, I went on to register the server and received the following msg.
A connection cannot be established to A0194876 [DB Library] Unable to
connect. SQL server is unavailable or does not exist.
My machine name is, A0194876. I have tried changing the machine name, rebooting, etc. but nothing works.
View 5 Replies
View Related
Feb 26, 1999
Hello,
We are facing problems in registering server in MS-SQL Server 6.5.
We are getting CODE EXCEPTION error. We tried unistalling SQL Server
and Re-Installing again. In spite of this, it is still giving the same error.
We happen to change the HOST name of the NT Server m/c on which
the SQL Server resides once.
What could have possibly gone wrong. Any help would be greatly appreciated.
Thanks.
View 2 Replies
View Related
Apr 17, 2001
Howdy,
I installed SQL Server 2000 (Standard Edition) on my desktop running Win2K Pro. During installation, a message indicated that only the client tools could be installed on this version (I assume it was referring to Win2K Pro). No errors were encountered during installation.
Now, I am trying to figure out how to get started working with SQL Server 2000. I opened the Enterprise Manager and have tried to register a SQL Server using the wizard to register a SQL Server. I then selected my computer name under the available servers list and then chose Windows Authentication to connect. On the next wizard screen I then chose to add the SQL Server to the default group name (SQL Server Group). After clicking on the Finish button, the Status block on the last screen indicates "SQL Server does not exist or access denied."
Any idea what's happening? What am I doing wrong?
TIA.
View 2 Replies
View Related
Feb 23, 2004
Hi all,
I'm having difficulty with registering a new SQL server across
a network. I'm guessing it's something to do with the authentication method, but as of yet I can't get it to work.
I recieve the message
"Login failed for user 'computername/Guest' "
Curiously, doing things the other way round (registering this server on the other one across the network) works absolutely fine, and as far as I can tell I have them set up exactly the same.
Any help would be very much appreciated!
Ben
View 3 Replies
View Related
May 17, 2002
Hi all,
Can someone tell me if it is possible to register and connect to a SQL server that is not on my local network? I want to be able to use the Enterprise Manager to make updates to the SQL servers in my office from home. I am using SQL 7.0
Thanks in advance,
Chris
View 1 Replies
View Related
