I trying to add records from a table in DBF format (created with Visual FoxPro) into an SQL table created with SQL Server 2005.
I first converted the dbf file into an ascii file and then in the Query Editor in the SQL Server I typed:
use [c:developesqlsqldatapsw.listener]
append from 'c:developesqldatalistener.txt' type sdf
go
and then I pressed F5. I get an error that says:
Msg 911, Level 16, State 1, Line 1
Could not locate entry in sysdatabases for database 'c:developesqlsqldatapsw.listener'. No entry found with that name. Make sure that the name is entered correctly.
I checked in the directory c:developesqlsqldata and the file psw.mdf is there and when I look in the psw database, the table listener is also there.
Could someone tell me what is going wrong? Also, how do I append the whole dbf table onto an SQL table. there's about 6000 records.
In SQL Server 2000, I have a parent table with a cascade update to a child table. I want to add a record to the child table whenever I add a table to the parent table. Thanks
I'm trying to add records from a table in DBF format (created with Visual FoxPro) into an SQL table created with SQL Server 2005.
I first converted the dbf file into an ascii file and then in the Query Editor in the SQL Server I typed:
use [c:developesqlsqldatapsw.listener] append from 'c:developesqldatalistener.txt' type sdf goand then I pressed F5. I get an error that says:
Msg 911, Level 16, State 1, Line 1 Could not locate entry in sysdatabases for database 'c:developesqlsqldatapsw.listener'.No entry found with that name. Make sure that the name isentered correctly. I checked in the directory c:developesqlsqldata and the filepsw.mdf is there and when I look in the psw database, the tablelistener is also there. Could someone tell me what is going wrong? Also, how do Iappend the whole dbf table onto an SQL table. there's about6000 records.
Is there any way or option to get the all columns of dataset added to table when we add a table in data region. It will take lot of time to add one by one and also there are chances to add one column ore than once.
I can add the records using an SQL statement, but when I try to open the recordset and add a record using the AddNew method it fails with the message:
The command contained one or more errors. [,,,,,]
But, if I connect to an Access database (which uses exactly the same tables, etc.) using the commented out connection string in the above sample, the code works fine. What am I doing wrong?
Here's my dilema. I'm using VB.Net 2003 and SQL DB
I'm having a problen adding a record to a table in my SQL DB
My previous experience has been working with Access databases.
When I try to create an SQLDataAdapter using the wizard from the toolbox the wizard will only create the Select statement. it won't create the UPDATE, DELETE or INSERT statements. I'm not sure why, I even tried using the form wizard and it still wouldn't work...
My tables all have primary keys defined.
So I decided that I would try to create everything programatically.
What I need to know is how to create the INSERT statement and which statements to use to add the record to the table.
I know that when using the OLEDataAdapter with the Acces DB I would do something like the following code.
Ok, I'm really new at this, but I am looking for a way to automatically insert new records into tables. I have one primary table with a primary key id that is automatically generated on insert and 3 other tables that have foreign keys pointing to the primary key. Is there a way to automatically create new records in the foreign tables that will have the new id? Would this be a job for a trigger, stored procedure? I admit I haven't studied up on those yet--I am learning things as I need them. Thanks.
Table2 contains fields Group, Name,Category, Dimension (Group and Name are not in Table1)
So basically I need to read the records in Table1 using Groupid and each time there is a Groupid then select records from Table2 where Table2.Category in (Select Catergory from Table1) and Table2.Dimension in (Select Dimension from Table1)
In Table1 There might be 10 Groupid records all of which are different.
I am trying to write a query that will retrieve all students of a particular class and also any rows in HomeworkLogLine if they exist (but return null if there is no row). I thought this should be a relatively simple LEFT join but I've tried every possible combination of joins but it's not working.
SELECT Student.StudentSurname + ', ' + Student.StudentForename AS Fullname, HomeworkLogLine.HomeworkLogLineTimestamp, HomeworkLog.HomeworkLogDescription, ROW_NUMBER() OVER (PARTITION BY HomeworkLogLine.HomeworkLogLineStudentID ORDER BY
[Code] ...
It's only returning two rows (the students where they have a row in the HomeworkLogLine table).
I'm trying to add a sum function to my query to sum the 12 records I get back in order to see if my total charges match the amounts within a different database table. Unfortunately, now when I run the query using the sum function, I am getting very large numbers back for the charge amt and I can't figure out why. Here is the query I've written:
IF OBJECT_ID('TEMPDB..#TMP1C') IS NOT NULL DROP TABLE #TMP1C IF OBJECT_ID('TEMPDB..#TMP2C') IS NOT NULL DROP TABLE #TMP2C
select prin_sbb, sub_acct_no_sbb, res_name_sbb, ext_stat_sbb, cur_bal_sbb, VIP_FLG_SBB INTO #TMP1C from Vantage.dbo.SBB_BASE (NOLOCK) where PRIN_SBB in (6000,7500)
[Code] .....
Not entirely sure what I am doing wrong, or why the numbers are coming back so high.
I am trying to add a website address to all the records in a database that match a certain criteria. The statement that I am using is shown below, but surprise surprise, it's not working! I'm new to SQL so any help would me much appreciated! Thanks.
declare @ComNum int set @ComNum = (select max(communication_number)+1 from communications)
insert into "communications" (contact_number, device, ex_directory, dialling_code, std_code, number, extension, notes, amended_by, amended_on, cli_number, communication_number) values (NULL, 'WW', 'N', NULL, 'WW', 'W', NULL, 'www.abc.co.uk', 'Jon', 2007-11-29, NULL, @ComNum); select name from organisations where name ='Abc Limited'
So, I have not included a VALUE for CONTACT_NUMBER as I wish to update all records with the website details as per the INSERT statement where the NAME column in the ORGANISATIONS table is 'Abc Limited'. I know something is wrong but I can't quite work out what!
Hey guys. I need a little help once again, here's the problem:
We are using an attendance system software that adds records in an Access 97 table whenever someone logs in or out of the room (Yes, it's old and I hate it, but it came with the hardware).
So we plan to create a program that lets admins check those login/logout data in an SQL Server 2005 database using a Visual Basic as the frontend.
Our only problem is, how do we transfer data from the Access 97 tables to our SQL tables *everytime* it gets updated? We don't need every detail the Access97 table has (it has IDNo, CardNo, Time, Location, plus other useless stuff). We just need to extract the IDNo(int) and Location(varchar) field(we'll just use getdate() for the Time since the update is done in realtime anyway).
So in a way, we are trying to find out a way to technically sync both tables, just like Database Mirroring style.
I have a shopping cart that will get full from time to time becausecustomers click out of the site before they confirm their purchase,therefore leaving a full cart behind. I'd like to have a timestamp onthis table, so that I can delete anything that I find is more than a dayold.How can I do this?Thanks,Bill*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
When adding records containing a date field in SQL Server 2005 Express I get an error Input string was not in a correct format. Do datefields have to be converted when adding or editing into strings?
I'm using VS2008 (as shipped with SQL CE 3.5 as shipped). I want to write a database app and started with a quite simple example: One table "Master" has 2 columns: int MasterID, int Value (where the MasterID is the primary key and is an identity column.
For the GUI I used the typed dataset components (based on the namespace: System.Data.SqlServerCe) which were automatically generated by VS2008. I just dropped the table from the datasources view to a form and got a DataGridview, a Navigator and some DB components, quite fine so far.
When i run the app i can add new rows and the identity column is filled with -1, -2 ... as expected. When I hit the save button, the rows are saved to DB, but the values of the identity columns are not updated (the still have -1, -2..)
When I use the exact same example with SQL Express evrything works fine: the identity Column's values are updated automatically and have +1, +2, ... Sure there is a statement "SELECT @@IDENTITY"... but I'm just using automated code so far, and i expect that code to work (automatically). Next problem: if i want to insert that "Select @@identity" stuff (I don't want to do that, but perhaps I have to?) where can I do this, I did not found a OnInsertedRow-Event? This problem is part of a bigger one: I want to use Master/Detail, but inserting the Details fails because the inserting of the master rows didn't return the correct Indentity values, so the detail rows cannot be inserted (the foreign keys -1, -2... will raise an error).
When querying a bit field, I am encountering a problem with MS SQLServer returning a larger number of records for a table than theactual number of records that exist within that table.For example, my customer table has 1 million unique records, so theresults of the following query are as such:select count(customer_nbr) from customer = 1,000,000There is bit field in the customer table that denotes whether acustomer has placed an order with us called. That flag is calledorder_flagIf I run the following query:select count(customer_nbr) from customer where order_flag = 1The result is 3,000,000 records.There is no logical way that this is possible, as my table onlycontains 1,000,000 unique records and the number of customers with anorder should be a subset of this.If a run the above query with a distinct before customer number, I getthe results I want:select count(distinct customer_nbr) from customer where order_flag = 1600,000 records.So while I can get to the answer I want, I have no idea why I amreturning incorrect values if I don't select distinct.Can anyone help? I checked microsoft support and message boards buthaven't seen anything.I should note that the bit field is indexed.I am not sure if that isthe problem or not.
I have a a Group By query which is working fine aggregating records by city. Now I have a requirement to focus on one city and then group the other cities to 'Other'. Here is the query which works:
Select [City]= CASE WHEN [City] = 'St. Louis' THEN 'St. Louis' ELSE 'Other Missouri City' END, SUM([Cars]) AS 'Total Cars' From [Output-MarketAnalysis] Where [City] IN ('St. Louis','Kansas City','Columbia', 'Jefferson City','Joplin') AND [Status] = 'Active' Group by [City]
Here is the result:
St. Louis 1000 Kansas City 800 Columbia 700 Jefferson City 650 Joplin 300
When I add this Case When statement to roll up the city information it changes the name of the city to 'Other Missouri City' however it does not aggregate all Cities with the value 'Other Missouri City':
Select [City]= CASE WHEN [City] = 'St. Louis' THEN 'St. Louis' ELSE 'Other Missouri City' END, SUM([Cars]) AS 'Total Cars' From [Output-MarketAnalysis] Where [City] IN ('St. Louis','Kansas City','Columbia', 'Jefferson City','Joplin') AND [Status] = 'Active' Group by [City]
Here is the result:
St. Louis 1000 Other Missouri City 800 Other Missouri City 700 Other Missouri City 650 Other Missouri City 300
If I just use a simple select statement, I find that I have 8286 records within a specified date range.
If I use the select statement to pull records that were created from 5pm and later and then add it to another select statement with records created before 5pm, I get a different count: 7521 + 756 = 8277
Is there something I am doing incorrectly in the following sql?
DECLARE @startdate date = '03-06-2015' DECLARE @enddate date = '10-31-2015' DECLARE @afterTime time = '17:00' SELECT General_Count = (SELECT COUNT(*) as General FROM Unidata.CrumsTicket ct
I can't get my head around this:I want to select all IDs from table A that do not have a related record intable B according to some condition:Table A contains, say, Parents and table B contains Children. I want toselect all Parents that have no children called "Sally" (this is a noddyexample, reminds me of being at Uni again :) ).Any ideas?Thanks
I have a situation where deleting old records is blocking updating latest records on highly transactional table and getting timeout errors from application.
In details, I have one table called Tran_table1 in OLTP database. This Tran_table1 is highly transactional table, it will receive data for insert/update continuously
While archiving 2 years old records from Tran_table1 into Tran_table1_archive in batches(using DELETE OUTPUT INTO clause), if there is any UPDATEs on Tran_table1,these updates are getting blocked and result is timeout errors in application.
Is there any SQL Server hints to avoid blocking ..
I have a table with about half a million records, each representing a patient in my county.
Each record has a field (RRank) which basically sorts the patients as to how "unwell" they are according to a previously-applied algorithm. The most unwell patient has an RRank of 1, the next-most unwell has RRank=2 etc.
I have just deleted several hundred records (which relate to patients now deceased) from the table, thereby leaving gaps in the RRank sequence. I want to renumber the remaining recs to get rid of the gaps.
I can see what I want to accomplish by using ROW_NUMBER, thus:
SELECT ROW_NUMBER() Over (ORDER BY RRank) as RecNumber, RRank FROM RPL ORDER BY RRank
I see the numbers in the RecNumber column falling behind the RRank as I scan down the results
My question is: How to convert this into an UPDATE statement? I had hoped that I could do something like:
UPDATE RISC_PatientList_TEMP SET RRank = ROW_NUMBER() Over (ORDER BY RRank);
but the system informs that window functions will only work on SELECT (which UPDATE isn't) or ORDER BY (which I can't legally add).
Hopefully I am posting this question in the correct forum. I am still learning about SQL 2005. Here is my issue. I have an access db that I archive weekly into and SQL server table. I have used the dst wizard to create an import job and initally that worked fine. field I have as the primary key in the access db cannot be the primary key in the sql table since I archive weekly and that primary key field will be imported several time over. I overcame this initally by not having a primary key in the sql table. This table is strictly for reference. However, now I need to setup a unique field for each of the records in the sql table. What I have done so far is create a recordID field in the sql table that is an int and set as yes to Identify (auotnumber). That worked great and created unique id for all existing records. The problem now is on the import. When I try to import the access table i am getting an error because of the extra field in the sql table, and the error is saying cannot import null value into this field. So... my final question is how can I import the access table into the sql table with one extra field which is the autonumber unique field? Thanks a bunch for any asistance.
I need to add a child table that will tell us who the participants counselor is, what I did was I did a Make Table query based off the primary key of the Parent table and made that the link (foreign key) for the People_tbl and the Counselor_tbl, so if the counselor changes then the user adds the record to the counselor tbl and then puts in the Effective date. The problem is that when I run a report it doesn't show the present counselor always shows the old counselor?
Code: SELECT Student_ind.StudentFirstName, Student_ind.StudentLastName, Student_ind.[Student ID], People_tbl.[Family ID], People_tbl.FirstName, People_tbl.LastName, People_tbl.[Parent ID] FROM People_tbl RIGHT OUTER JOIN Student_ind ON People_tbl.[Family ID] = Student_ind.[Family ID] WHERE (People_tbl.LastName = @Enter_LastName) AND (People_tbl.FirstName = @Enter_FirstName)
If on the source I have a new column, the script generated by SqlPackage.exe recreates the table on the background with moving the data into a temp storage. If the table is big, such approach can cause issues.
Example of the script is below: in the source project I added columns [MyColumn_LINE_1] and [MyColumn_LINE_5].
Is there any way I can make it generating an alter statement instead?
BEGIN TRANSACTION; SET TRANSACTION ISOLATION LEVEL SERIALIZABLE; SET XACT_ABORT ON; CREATE TABLE [dbo].[tmp_ms_xx_MyTable] ( [MyColumn_TYPE_CODE] CHAR (3) NOT NULL,
[Code] ....
The same script is generated regardless the table having data or not, having a clustered or nonclustered PK.
I have been searching many postings and I cant seem to find anyonethat has this answer so I decided to post. I am using SQL(Transact-SQL).If I have 2 tables with columnsacct_num,activity_date,and pay_amt and I want to delete one instanceof a record in table 1 for every instance of that record in table 2how could I do that. For example.Table 1-----------acct activity_date pay_amt123 5/1/2004 50.00123 5/1/2004 50.00123 5/1/2004 50.00123 5/1/2004 50.00123 5/1/2004 50.00Table 2-----------acct activity_date pay_amt123 5/1/2004 50.00123 5/1/2004 50.00I need a delete statement that will find 2 of the 5 records(It doesn'tmatter which 2) and delete them.Leaving table one looking like this.Table 1-----------acct activity_date pay_amt123 5/1/2004 50.00123 5/1/2004 50.00123 5/1/2004 50.00How can I do this??
Hi all, I have a database setup with a few rows and i would like to allow a user to create a new row of data. After some googling, I've deduced that I need to somehow use an onclick command to perform an insert command. here is my code as of right now: protected void ItemAdd_Click(object sender, EventArgs e) {int newnum = 4;int POnum = newnum ++;
whenever I run this, I receive the following error and am not sure how to correct it:
System.Data.SqlClient.SqlException: Must declare the scalar variable "@Item".
If someone could please explain to me the process here of what is going ion it would be greatly appreciated. My understanding is the @item is just a variable if you will so i'm not sure why its stating i need to declare it.
Hi there,I am currently setting up a registration system where customers can registers their details and the details of the product, using ASP.net and MS SQL.There is a column called customerID in the Custoemrs table, and a column of the same name in the Products table, so that I can have relationships between the tables.For obvious reasons (ie. people that quit half-way through), I want to hold all the information until the end. The ID in the Customer table is unique, and auto-increasing, and therefore not assigned until the data enters the database.However, I wish to submit information to the Products table at the same time, but what shall I put in for the custoemrID (which hasn't yet been assigned)Thank you in advance for your help,Nathair
Hello all I am new to this site. I am trying to use ASP.NET to build an application but I am not sure how to add photos and other data to the sql table that I have created.
I'm looking for information on how to add indexes to a table in a SQL Server 2000 Database, why add them etc? Any source of good information on the web regarding this?
I have a table size 2078mb, number of row +530,900. Is it normal for sql to lock users out of the db when I add a column to the end of the table? I'm running SQL 7.0. The table has 4 col regular indexes. No primary keys. It locked the user out for about 10 min. I thought with SQL 7.0 this problem went away?
