Fails When Use MS Access Datasourse And Ran Form SQL Job (Fine In IDE)

Dec 19, 2007

Hi,

I have created a relatively simple SISS package for MS SQL server 2005 SP1, the package runs without issue when started from the development environment, but fails when ran via a SQL Job.


I have other SISS jobs which run without any problems, the difference with this one is that it doesn€™t just access data the the MS SQL server databases, but it also accesses an external MS Access 2003 database (emptys tables then repopulates based on data in MS SQL)

The database is held on a network share, so I would imagine the issue is that the SQL job is ran under a different security context. Originally it was ran under €œSERVERNAMESYSTEM€?, but I created a new credential on the server giving it my own username and password, I then added a proxy to the server which used the new credietial and was given access to all sub systems.


The SQL job step was setup to run under this proxy, but still failed even though the user name on the credentials had access to the MS Access database on the network share & also matched the package CreatureName, allowing the data to be read as EncryptSensitiveWithUserKey was set in the package.


The SISS package was created by using the wizard, no ODBC connection was setup on the server.
The job history shows €œExecuted as user: ADMINusername. The package execution failed. The step failed.€?
I have also tried this with a protection level of ServerStorage



Any sugestions?

View 4 Replies


ADVERTISEMENT

Sql Job Fails But When Run Outside Works Fine

Mar 25, 2008

Hi..

I am stuck at a very awkward place. I have created one package which uses an oracle view as its source for data transfer the problem is when i run the package through dtexec it works fine but when i try to schedule it I get the following error


Error: 2008-03-24 13:52:40.22
Code: 0xC0202009
Source: pk_BMR_FEED_oracle Connection manager "Conn_BMR"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.

Provider is unable to function until these components are installed.".

I am able to run the package outside the sql job and also connect to the oracle.
I have oracle 9i client installed on the server and sql server is 2005.

Any help would really be appreciated..

View 4 Replies View Related

32 Bit DTExec Fails While 64 Bit Works Fine On 64 Bit Machine

Mar 18, 2008

Hi,
I am executing a SSIS package using dtexec. 64 bit version of dtexec works fine. But when i use 32 bit version of dtexec, it fails. i have local admin rights. Following is error description. Please help.


Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.

Started: 9:24:30 AM
Error: 2008-03-18 09:24:32.54
Code: 0xC0202009
Source: IMALCRM Connection manager "IMAL SRC"
Description: An OLE DB error has occurred. Error code: 0x800703E6.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" H
result: 0x800703E6 Description: "Invalid access to memory location.".
End Error
Error: 2008-03-18 09:24:32.54
Code: 0xC020801C
Source: Load Fund Detail V_FUND_DETAIL [16]
Description: The AcquireConnection method call to the connection manager "IMA
L SRC" failed with error code 0xC0202009.
End Error
Error: 2008-03-18 09:24:32.54
Code: 0xC0047017
Source: Load Fund Detail DTS.Pipeline
Description: component "V_FUND_DETAIL" (16) failed validation and returned er
ror code 0xC020801C.
End Error
Error: 2008-03-18 09:24:32.54
Code: 0xC004700C
Source: Load Fund Detail DTS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2008-03-18 09:24:32.54
Code: 0xC0024107
Source: Load Fund Detail
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 9:24:30 AM
Finished: 9:24:32 AM
Elapsed: 2.078 seconds

View 5 Replies View Related

Package Runs Fine In BIDS, Fails When Scheduled

Dec 28, 2007

I have a 7 step SSIS package that manipulates some data on a DB2 database. The package executes perfectly in Business Intelligence Development Studio. I save the package to my SSIS store and then point my scheduled task to it and it fails after about 9 seconds everytime. I have an identical job that works with a different DB2 database that works without any problem. The only difference is the database it's pointing to.

The package is executing as the same user who created it, which has sysadmin to both the SSIS store and the SQL instance the package is executing on. When I saved the package I selected "Rely on server storage roles for access control" for the protection level.

This one is driving me crazy, can't figure it out. Any idea's?

View 7 Replies View Related

SSIS Package Runs Fine; SQL Job Fails (DBF Involved)

Jun 14, 2007

I have created an SSIS package which, as its 2nd step, picks up a .dbf table and does a Data Flow Task of putting the .dbf table into a SQL Server 2005 table (which was just truncated in Step 1).



The Connection Manager that works on the .dbf table is Native OLE DBMicrosoft Jet 4.0 OLE DB Provider.



The entire SSIS package runs perfectly when i run it from my development environment.



I then assigned this Package to a SQL Server 2005 Job. The entire package is the sole step of the job.



But when I run the SQL Job, the Job fails immediately on Step 2.



Here is the error message in View History of the SQL Job:

-----------------------------------------------------------------------------

Executed as user: DBASE01SQLExec. ...on 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:48:37 AM Progress: 2007-06-14 11:48:37.91 Source: DBF to ScanUS_Process Validating: 0% complete End Progress Progress: 2007-06-14 11:48:37.91 Source: DBF to ScanUS_Process Validating: 33% complete End Progress Error: 2007-06-14 11:48:37.91 Code: 0xC0202009 Source: DBF to ScanUS_Process ScanUS DBF Output File [1] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37. End Error Error: 2007-06-14 11:48:37.91 Code: 0xC02020E8 Source: DBF to ScanUS_Process ScanUS DBF Output File [1] Description: Opening a rowset for "scanus_process" failed. Check that the object exists in the database. End Error Error: 2007-06-14 11:48:37.95 Code: 0xC004706B Source: DBF to ScanUS_Process DTS.Pipeline Description: "component "ScanUS... The package execution fa... The step failed.

-----------------------------------------------------------------------------



Could someone suggest why this works OK within SSIS but not when the SSIS Pakcage is called from SQL?



thx very much/spirits.



seth j hersh

View 7 Replies View Related

Report Works Fine Stand Alone, But Fails When Used As Subreport

Jun 4, 2007

I have a report which I have tested and works fine. now I'm trying to use it as a subreport. the "outer" or main report is very simple: it just has a company standard banner and some header/footer information, and then a single subreport. there is no passing of parameters between main report and sub report. the subreport does have its own parameter to govern its dataset, and provides its own default for that.



The error that I'm getting is this:



[rsErrorExecutingSubreport] An error occurred while executing the subreport €˜subreport1€™: An error has occurred during report processing.

[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. This field is missing from the returned result set from the data source.

[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. The data extension returned an error during reading the field.

[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. This field is missing from the returned result set from the data source.

[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. The data extension returned an error during reading the field.

[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. This field is missing from the returned result set from the data source.

[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. The data extension returned an error during reading the field.

[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. This field is missing from the returned result set from the data source.

[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. The data extension returned an error during reading the field.

[rsNone] An error has occurred during report processing.



Of course, this doesn't happen when I execute the subreport by itself. What kinds of things should I be looking at to get to the bottom of this. Thanks!

View 3 Replies View Related

DTS Package Manually/locally It Runs Fine. But The Scheduled Job Run And Fails

Oct 16, 2007

I was facing some issue on MP. Yesterday I changed the SQL services to use the local admin account. That didn't help my MP issue. But it may have created another issue.
When I run the package manually/locally it runs fine. But the scheduled job run and fails with the Title string.
---------------------------------
Executed as user: IL06EDM00SYSTEM. ...tart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_2 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_3 DTSRun OnError: DTSStep_DTSExecuteSQLTask_2, Error = -2147467259 (80004005) Error string: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 18452 (4814) Error string: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_2 DTSRun OnError: DTSStep_DTSExecuteSQLTask_3, Error = -2147467259 (80004005) Error string: Login failed for user '(null)'. Reason: Not associated with ... Process Exit Code 2. The step failed.
--------------------------------------------------------------

Any ideas.

View 1 Replies View Related

Works Fine Inside BI Dev. Studio, But Fails When Scheduling It In SQL Server 2005.

Jul 13, 2005

Hi!

View 12 Replies View Related

SQL 2000 Partitioned View Works Fine, But CURSOR With FOR UPDATE Fails To Declare

Oct 17, 2006

This one has me stumped.

I created an updateable partioned view of a very large table. Now I get an error when I attempt to declare a CURSOR that SELECTs from the view, and a FOR UPDATE argument is in the declaration.

There error generated is:

Server: Msg 16957, Level 16, State 4, Line 3

FOR UPDATE cannot be specified on a READ ONLY cursor



Here is the cursor declaration:



declare some_cursor CURSOR

for

select *

from part_view

FOR UPDATE



Any ideas, guys? Thanks in advance for knocking your head against this one.

PS: Since I tested the updateability of the view there are no issues with primary keys, uniqueness, or indexes missing. Also, unfortunately, the dreaded cursor is requried, so set based alternatives are not an option - it's from within Peoplesoft.

View 2 Replies View Related

Incorrect Syntax Near... Fine In QA Not In Access

Apr 4, 2008

I created a couple of stored procedures. One of them (let's call it SP1) dumps information into a table and then calls another stored procedure (SP2) to put the info in a temp table in crosstab format. SP1 then displays the info from the temp table.

When I execute SP1 from Query Editor, everything works perfectly. No errors are returned and my data is displayed just as expected.

When I try to execute SP1 from MS Access's pass-through query, I get the following error:

[Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near ','.(#102)[Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near 'A'(#102)

I've found that the error occurs when the SP2 is called from within SP1. If it's working fine in Query Editor, shouldn't it work from MS Access? Any insights?

View 2 Replies View Related

Insert Query Fails (if Form Fields Left Empty)

Aug 13, 2007

Dear All,
I have created a table in my SQL server database, the problem i am facing is my insert query fails if i leave any form field empty (leave it blank). On my back-end table, only one field is mandatory, and others have been set with the constraint "allow null".
As per our business requirement, except one value is complusory while others are optional. If I enter all values in the form it works perfectly fine. Can you see in the code below - where am i possibly going wrong ?
<script language="VB" runat="server" >      Sub Page_Load(Src As Object, e As EventArgs)                      If Page.IsPostBack Then                        Dim ConLath As SqlConnection            Dim comLath As SqlCommand            Dim insertcmd                        conLath = New SqlConnection("Data Source=SQLas;Initial Catalog=settle;User ID=sa;Password=password")            ConLath.Open()            insertcmd = "Insert into His_set values (@t_d,@s_p,@p_s,@v_oq,@i_oq,@v_qn,@i_qn,@v_qw,@i_qw)"                        comLath = New SqlCommand(insertcmd, ConLath)                                    comLath.Parameters.Add(New SqlParameter("@t_d", SqlDbType.DateTime, 12))            comLath.Parameters("@t_d").Value = trade_date.Text            comLath.Parameters.Add(New SqlParameter("@s_p", SqlDbType.Decimal, 8))            comLath.Parameters("@s_p").Value = sett_price.Text            comLath.Parameters.Add(New SqlParameter("@p_s", SqlDbType.Decimal, 8))            comLath.Parameters("@p_s").Value = post_close.Text            comLath.Parameters.Add(New SqlParameter("@v_oq", SqlDbType.Int, 8))            comLath.Parameters("@v_oq").Value = vol_oq.Text            comLath.Parameters.Add(New SqlParameter("@i_oq", SqlDbType.Int, 8))            comLath.Parameters("@i_oq").Value = oi_oq.Text            comLath.Parameters.Add(New SqlParameter("@v_qn", SqlDbType.Int, 8))            comLath.Parameters("@v_qn").Value = vol_qn.Text            comLath.Parameters.Add(New SqlParameter("@v_qw", SqlDbType.Int, 8))            comLath.Parameters("@v_qw").Value = vol_qw.Text            comLath.Parameters.Add(New SqlParameter("@i_qn", SqlDbType.Int, 8))            comLath.Parameters("@i_qn").Value = oi_qn.Text            comLath.Parameters.Add(New SqlParameter("@i_qw", SqlDbType.Int, 8))            comLath.Parameters("@i_qw").Value = oi_qw.Text
                        Try                comLath.ExecuteNonQuery()                            Catch ex As SqlException                If ex.Number = 2627 Then                    Message.InnerHtml = "ERROR: A record already exists with " _                       & "the same primary key"                Else                    Message.InnerHtml = "ERROR: Could not add record, please " _                       & "ensure the fields are correctly filled out"                    Message.Style("color") = "red"                End If            End Try
            comLath.Dispose()            ConLath.Close()                                                        End If   End Sub
</script>
 

View 6 Replies View Related

Package Execution Fails In Windows Service But Runs Fine As A Windows Application.

Jun 23, 2006

I am attempting to write a Windows service that watches a database for uploaded files to import. When a new file is found, the corresponding SSIS package is run from the file system with variables passed through. I started development as a Windows app and copied the functionality to a service.

The app runs fine. The service does not. I get a "Failure" each time a package is executed. Everything is identical behind the scenes with the obvious exceptions that OnStart and OnStop handlers are buttons in the app. I added a script task at the beginning of one of the SSIS packages to notify me that it is even running at all. It doesn't even hit that initial task.

Again, the app will run all packages just fine. The data is imported and the results return as "Success."

The following is the code executing the package. Any help is appreciated. I've been banging my head on this one for a few days now. (Is there a tag to format a code sample?)

Dim pkgLocation As String
Dim pkg As New Package
Dim app As New Application
Dim pkgResults As DTSExecResult

pkgLocation = sPackageFolder & PackageName & ".dtsx"

pkg = app.LoadPackage(pkgLocation, Nothing)

Dim vars As Variables = pkg.Variables

vars("ImportId").Value = ImportId
vars("ProductionServer").Value = ProductionServer
vars("ProductionDatabase").Value = ProductionDatabase
vars("SourceFileName").Value = FileName
vars("SourceFilePath").Value = FilePath

pkgResults = pkg.Execute()

View 3 Replies View Related

Same DTS Fails Executed As Job ,but Run Fine When Executed From DTS Designer

Mar 13, 2002

I created DTS a while ago and placed in job to run once a day (it worked fine for 3 months)
2 days ago I changed sa password and now job fails with error (Login failed for user 'sa'.), but it run fine from DTS !!!


1. My DTS created with domain Account DomainSVCSQL2000( sa rights and local admin)
2. SVCSQL service use DomainSVCSQL2000 to run
3. SVCSQL agent use DomainSVCSQL2000 to run
4. DTS use 'osql -E

Where should look for reference to sa ?







Executed as user: MONTREALsvcsql2000. DTSRun: Loading... Error: -2147217843 (80040E4D); Provider Error: 18456 (4818) Error string: Login failed for user 'sa'. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0. Process Exit Code 1. The step failed.

View 5 Replies View Related

SQL ACCESS Vias Web Form

Dec 12, 2004

Hello, I'm having a problem connection to an Eval version of SQL Server 2000. I'm pretty sure the problem is not due to Eval version since...well, I need to evaluate the server if I intended to purchase it right? anyhow. I've loaded a copy of SQL server 2000 on my local machine. I only have one machine which I use for development and housing SQL Server.

I tried to set SQL up real "vanilla" and elected to use only Windows Authentication, this bypassing any userdefined passwords for the sa login.

Now...I've written a real basic Stored Procedure to test the connection and verify proper data transfer from the .aspx page. here's the SP SQL code and the .vb code behind page as well as the error I get. Note. I also tried Query Analyzer and was getting an error there as well indicating the SP could not be found...hmmm..

stored procedure:

CREATE PROCEDURE [dbo].[NewMemberInsert]

@UserNamevarchar(100),
@UserPassvarchar(10)

AS

INSERT INTO EEMemberList ( UserName, UserPass )
VALUES ( @UserName, @UserPass)
GO

.vb code behind

Imports System
Imports System.Data
Imports System.Data.SqlClient


Public Class WebForm1
Inherits System.Web.UI.Page
Protected WithEvents lblUserName As System.Web.UI.WebControls.Label
Protected WithEvents lblUserPass As System.Web.UI.WebControls.Label
Protected WithEvents txtUserName As System.Web.UI.WebControls.TextBox
Protected WithEvents btnSubmit As System.Web.UI.WebControls.Button
Protected WithEvents frmMyForm As System.Web.UI.HtmlControls.HtmlForm
Protected WithEvents SqlConnection1 As System.Data.SqlClient.SqlConnection
Protected WithEvents sqlCmd As System.Data.SqlClient.SqlCommand
Protected WithEvents txtUserPass As System.Web.UI.WebControls.TextBox

#Region " Web Form Designer Generated Code "

'This call is required by the Web Form Designer.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
Me.SqlConnection1 = New System.Data.SqlClient.SqlConnection()
Me.sqlCmd = New System.Data.SqlClient.SqlCommand()
'
'SqlConnection1
'
Me.SqlConnection1.ConnectionString = "data source=THIRDEYE;initial catalog=SQCTEST;integrated security=SSPI;persist sec" & _
"urity info=False;workstation id=THIRDEYE;packet size=4096"
'
'sqlCmd
'
End Sub

Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init
'CODEGEN: This method call is required by the Web Form Designer
'Do not modify it using the code editor.
InitializeComponent()
End Sub

#End Region

Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'Put user code to initialize the page here
End Sub

Private Sub btnSubmit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSubmit.Click

sqlCmd.CommandText = "dbo.[NewMemberInsert]"
sqlCmd.CommandType = System.Data.CommandType.StoredProcedure
sqlCmd.Connection = SqlConnection1
sqlCmd.Parameters.Add(New System.Data.SqlClient.SqlParameter("@RETURN_VALUE", System.Data.SqlDbType.Int, 4, System.Data.ParameterDirection.ReturnValue, False, CType(10, Byte), CType(0, Byte), "", System.Data.DataRowVersion.Current, Nothing))
sqlCmd.Parameters.Add(New System.Data.SqlClient.SqlParameter("@UserName", System.Data.SqlDbType.VarChar, 100))
sqlCmd.Parameters.Add(New System.Data.SqlClient.SqlParameter("@UserPass", System.Data.SqlDbType.VarChar, 10))
sqlCmd.Parameters("@UserName").Value = txtUserName.Text
sqlCmd.Parameters("@UserPass").Value = txtUserPass.Text

sqlCmd.Connection.Open()


End Sub
End Class

Now...the error

Server Error in '/EEscape' Application.
--------------------------------------------------------------------------------

Login failed for user 'THIRDEYEASPNET'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'THIRDEYEASPNET'.

Source Error:


Line 54: sqlCmd.Parameters("@UserPass").Value = txtUserPass.Text
Line 55:
Line 56: sqlCmd.Connection.Open()
Line 57:
Line 58:


Source File: C:InetpubwwwrootEEscapelogin.aspx.vb Line: 56

Stack Trace:


[SqlException: Login failed for user 'THIRDEYEASPNET'.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction)
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction)
System.Data.SqlClient.SqlConnection.Open()
EEscape.WebForm1.btnSubmit_Click(Object sender, EventArgs e) in C:InetpubwwwrootEEscapelogin.aspx.vb:56
System.Web.UI.WebControls.Button.OnClick(EventArgs e)
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
System.Web.UI.Page.ProcessRequestMain()




--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573

View 2 Replies View Related

Reporting Services :: Check Access Fails To Grant Access To Report Item For Current User

Sep 10, 2015

Is there any way to get more information for when IAuthorizationExtension::CheckAccess fails to grant access to a report item for the current user? Specifically, it would be useful to know:

1. URL of attempted report
2. IP address of user agent
3. Identity of current user
4. Date/Time of the failed attempt

ssrs2014

View 7 Replies View Related

Passing Value From A Access Form To A Query

Jun 23, 2006

Frustration has gotten the best of me on this one. Can anyone help?
I need to pass the current value in an Access Data Project (back-end is MS SQL) text field to the where condition in an SQL using VBA. This is what I have, but does not work.

Private Sub Command44_Click()
Me.SS.SetFocus
Dim strSQL As String
Dim strSSecurity As String
strSSecurity = Me.SS
strSQL = "Update Employees Set employees.PositionID = '',employees.jobcode = '' Where employees.ss = strSSecurity"
DoCmd.RunSQL strSQL
End Sub

It is supposed to take the current Social Security number from the form and match it against the employees table. Once it finds the matching record it should update the PositionID and JobCode fields to '' (empty string)
But it doesn't
Anyone with any ideas?
Thanks
Dan

View 2 Replies View Related

Linking Form In MS Access To Oracle

May 9, 2008

hello

we suppose to link the form in MS Access with Oracle

can anyone tell me how to write the code for these buttons

i tried to write as I learned in VB.NET,
But it seems doesn't work :(

http://www3.speedyshare.com/data/191404757/10803567/78224332/db2.jpg

View 2 Replies View Related

SQL Server Login Form For Access

Jul 20, 2005

Hi there...I use SQL server integrated security so when a user opens a database inaccess it prompts the username & password in a small popup box onconnection, but I'd like to use my own customised form for theauthentication process, is this possible? I do know that this login popboxis displayed before any forms are loaded, can it be said that on databaseconenct that the form is opened? How will I transfer the values entered intothe login form to the sql server for authentication?Thanks alot in advanceRudi Groenewald

View 3 Replies View Related

Import Form Access And Transactions

Oct 1, 2007

I'm trying to import data from Access table using DataFlow with TransactionOptions- Required.
I just want to "remove" (rollback) all records which my SSIS Dataflow inserts into SQL Server.
First I tried to use normal Jet 4.0 provider - but it causes strange error.
Then I tried to use .NET Jet 4.0 provider - it produces this error :






Code Block

[DataReader Source [540]] Error: System.InvalidOperationException: The ITransactionLocal interface is not supported by the 'Microsoft.Jet.OLEDB.4.0' provider. Local transactions are unavailable with the current provider. at System.Data.OleDb.OleDbConnectionInternal.EnlistTransactionInternal(Transaction transaction, Boolean forcedAutomatic) at System.Data.OleDb.OleDbConnectionInternal.EnlistTransaction(Transaction transaction) at System.Data.OleDb.OleDbConnection.EnlistTransaction(Transaction transaction) at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String connStr, Object transaction) at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager90.AcquireConnection(Object pTransaction) at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Any ideas how to do this? I really need transactions in my solution. With Excel file it works fine.
Thanks for help.

View 1 Replies View Related

Remote Access For Windows Form Application

Jan 10, 2007

I have a windows based software application that connects remotely to a sql server 2005 and calls stored procedures. There is someone that I work with that is cautioning the company strongly that this is a bad thing to do in terms of security. Isn't this a very common thing to do? Assuming that the SQL Server installation is setup appropriately. Is this a bad practice?

View 4 Replies View Related

Using Access Form Control As SQL Function Criteria

Jul 28, 2006

I have a combo box named [myControl] on an Access form that I can use to select/enter a site name (ABC). There is a button on the same form that runs a report. The underlying record source for the report is a SQL Function. Is there an easy way to pass the combo box value to the SQL Function so that only records for site 'ABC' are displayed in the report? I tried Forms![myForm]![myControl] in the criteria box of the Function and it did not work. THANKS!

View 3 Replies View Related

How To Access Static Global Variables In WPF Form

Dec 5, 2007



Hi,

can i keep my global variables in app.xaml.cs file.

if yes then how will i access those variables in MyFirstApp.xaml.cs file??

if no then what is other alternate to create global variables so that it can be access through out the project??

thanx alot
Mohan

View 4 Replies View Related

MS ACCESS SSIS Fails On Bad Date In ACCESS

May 11, 2007

I am receiving the following errors while trying to import data from an access database.


[Destination 2 - Amc_C_ARRV [400]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification".



[Destination 2 - Amc_C_ARRV [400]] Error: There was an error with input column "tSympOnsetDate" (494) on input "Destination Input" (413). The column status returned was: "Conversion failed because the data value overflowed the specified type.".



[Destination 2 - Amc_C_ARRV [400]] Error: The "input "Destination Input" (413)" failed because error code 0xC020907A occurred, and the error row disposition on "input "Destination Input" (413)" specifies failure on error. An error occurred on the specified object of the specified component.





The source database has "invalid" dates such as "6/4/199" and "12/23/1899". I am unable to change the data in the source database and have been instructed to load the values as nulls in the SQL destination tables. I tried to do a conditional split using a "ISDATE()" function but that is not a valid function for conditional splits.



What are my options for validating the incoming dates are correct or nulling the dates out that aren't



Thank you in advance,



Tom E.

View 11 Replies View Related

Passing Date Fields From Form To Access ADP Views

Jul 20, 2005

I have a whole bunch of forms that have an unbound StartDate and anEndDate field that I have used in MSAccess MDB databases as parametersin queries (ie tblEvent.StartDate > Forms!myFormName.StartDate.)So, now I'm migrating this beast over to and ADP/SQL Server projectusing Views and Procedures.How do I pass the value in Forms!myFormName.StartDate to a Procedureand get something that looks like:If tblEvent.StartDate > Forms!myFormName.StartDate then ...Any help is GREATLY appreciated. This is a major problem before I canmove ahead with this beast!lq

View 1 Replies View Related

Filter Records In Access 2003 Project Form

Mar 6, 2008

I am trying to filter the records in an Access2003 project form using data from a control in a different form. I define the variable in form1 as RegKeyWord. The record source for form2 ends with WHERE CustomerName Like RegKeyWord. I receive the error Invalid column 'RegKeyWord'
Can anyone help?

View 1 Replies View Related

Can Create Access Form Layout Based On Table From Sql?

Sep 25, 2006

Hi,

Can this be done? Please advise. Thanks.Is there any template available in sql for creating forms?

View 1 Replies View Related

Import Data Form Access To Sql Server 2005

Feb 20, 2007

I have a database in ACCESS and i want everytime that there is a change made in Access the cude in SQL server to be automatically updated .Is there a way that this can be done with Integration Services?

View 1 Replies View Related

How To Make Form To Delete Record From Table In Access 2002

Jun 29, 2004

I like to give First Name and Last Name in two different text box and then hit the delete button (command button). Then it will do a query to find the person and delete the corresponding record from the table. Any kind of help will be appreciated. Thank you.

View 1 Replies View Related

MS Access Front End To SQL Server Problem Passing Form Value To Report

Jul 23, 2005

I just changed my Access 2002 database to a SQL Server ADP project. Ihad a form where the user entered a value into a text box and when acommand button on the form was clicked a Report was opened. The reportsrecord source is a query. The query uses the value from the form textbox to restrict the query.Table name = EggsTableone of the columns in the table is named: EggColorForm name = EggColorFormForm text box name = ColorTextBoxThis sql worked for the query before I converted to SQL:SELECT EggsTable.EggColorFROM EggsTableWHERE (((EggsTable.EggColor)=[Forms]![EggColorForm]![ColorTextBox]));This no longer works. Can I change the syntax somehow to get this towork? I tried dropping the brackets around the word "Forms", I trieddropping all the square brackets, etc., nothing worked.I also tried just opening the report with the report's Server Filterproperty set to:EggColor=N'Forms.EggColorForm.ColorTextBox'I tried using the Report's open event to pass the form value directlyto the report. I tried setting a variable from the text box value onthe form. So far, nothing works. Any ideas?

View 7 Replies View Related

One Form To Update Different SQL Tables Based Upon Form Selection

Apr 16, 2008

Hello,
My company Intranet has a form that agents can use to post their comments about the company to upper management, but our customer service department would like to modify the form so that the agent has to pick from a comment type.
The dropdown options on the form will be as follows:
ComplimentsComplaintsGeneral CommentsSuggestions
Each dropdown option has a designated table in a SQL DB.Using postback on the same page, I need to change which fields of the form are visible based upon which dropdown selection the user chooses, and I need the fields to then be inserted into the table that corresponds with the dropdown selection item.
For example: If the Compliments dropdown selection is picked, I need a text box to show for the user's location, the name of the customer, account number, and the message box. Once the submit button is clicked, the characters in these boxes need to be inserted into the Compliments table using its data adapter.
However, if the user selects Suggestions, the name of the customer and the account number should not be visible, since these fields do not exist and when the submit button is pressed, the Suggestions table should be updated.
If you need more information, I will provide whatever is needed.
As always, thanks for everyone's assistance.
Chris

View 3 Replies View Related

SQL DB Access Fails On Vista When UAC On

Oct 9, 2007

We have an application (.Net 2.0) which installs SQL database.
It installs database sucessfully but when I try to connect the databse using other components of the application,
it fails to connect the database.

Everything works fine if I login as username:"Administrator". or UAC off.
I know in vista when UAC on memeber of admin is considered as standard user.

I got solution to add user in sysadmin role.
http://msdn2.microsoft.com/en-us/library/bb326612.aspx
http://support.microsoft.com/kb/929907

It is per user settings. We want some integrated solution. So our customers wouldn't need to do per user settings.

This is urgent. please help...

Thanks.

View 5 Replies View Related

DB Access Works In Debug But Fails When Hosted

Mar 28, 2007

I have written a intranet page that writes some info into a sql database, basically following the 'SQL Server 2005 Express for Beginners' video.When I debug the application from within 'Visual Web Develop 2005 express' it works fine entries are entered into the DB and I can then edit the db using the admin page.But when I host the site using IIS I doesn't work, submissions to the database seem to fail I can see the DB in the admin page but if I try to edit them or delete them it fails. What could I doing wrong could I be missing a setting in IIS? Any ideas??Here's my webconfig if that helps at all:  <?xml version="1.0"?><configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">    <connectionStrings>        <add name="studentprofilesConnectionString1" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|studentprofiles.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/>    </connectionStrings>    <system.web>        <roleManager defaultProvider="AspNetWindowsTokenRoleProvider" />  <compilation debug="true" defaultLanguage="c#" /></system.web></configuration>  

View 1 Replies View Related

Accessing MS Access When Running On Server Fails

Feb 5, 2008

Hello:

I have a package which runs fine from the client but not the server (see error below). I am logged into the client with my domain account, and the package runs under a proxy using that same domain account (for now). The MS Access db I am trying to pull from is on a non-domain computer, and I have created a Y: mapped drive on both the client and server that access a share on that machine where the Access database lives--I created the mapped drive using the "different user" option, and used a local account on the non-domain computer to create the mapped drives.

On the server, when logged in as my domain account, I can use the y:MyDB.mdb you can see below in Start | Run to hit the Access database. Why can't the package also see this file when running on the server?




Code Snippet
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "'y:Mydb.MDB' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.". End Error Error: 2008-02-05 02:35:56.26 Code: 0xC020801C Source: Cost Cost [1] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "MyDB" failed with error code 0xC0202009. There may be error messages posted before this with more informat... The package execution fa... The step failed.


Thanks,
Kayda

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved