I have had a development XP workstation with RS2000 and IIS sending reports via email for 6 months straight with no problems.
Today my subscriptions are failing with
Failure sending mail: The system cannot find the path specified.
Been searching and digging for hours, and if anyone has any ideas they are greatly appreciated.
Dear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.
Hi Everyone,
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Any suggestions appreciated,
Thanks.
Hi All,
When I am execute the SSIS packages in my machine, it is working fine,
The SSIS package contains Send Mail task, but if the same application is executed by my colleague,
he is getting the error "Failure Sending mail", but he was able to execute the same application successfully previouly. but he can able to send the mail from his outlook.
Any suggestions appreciated.
Regards,
Nathan
Hi All,I use Bulk insert to put data to myTable.When the SQL server is in local machin, it works well. But when I putthe data in a sql server situated not locally, then I get a errormessage like this:Could not bulk insert because file 'C:Data2003txtfilesabif_20031130.txt' could not be opened. Operating systemerror code 3(The system cannot find the path specified.).BULK INSERT myTableFROM 'C:Data2003 txtfilesabif_20031130.txt'with (-- codepage = ' + char(39) + 'ACP' + char(39) + ',fieldterminator = ';',rowterminator = '',keepnulls,maxerrors=0)Someone can explan me what the error shows upThanks in advance- Loi -
View 3 Replies View Related
Hi all
When using a subscription to send mail, I find that the report can be sent in any format apart from Excel, which gives me the error: "Failure sending mail: Unspecified error". As you can imagine, this doesn't give me much to go on!
I want to use Excel format as it retains the drilldown functionality (hiding / unhiding rows). The ExecutionLog has the status as rsSuccess, but Subscription tab for the report shows the error.
Any thoughts would be most welcome!
Hello.
Thanks for any help anyone can offer me.
I have SQL Server Reporting services on Windows 2000.
The reports seem to be working well, but I cannot get a subscription to work. The error I get is the one in the subject line.
I look into my log files and see these lines.
ReportingServicesService!emailextension!ab0!12/07/2007-15:02:07:: Error sending email. Microsoft.ReportingServices.Diagnostics.Utilities.RSException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> System.Runtime.InteropServices.COMException (0x80090005): Bad Data.
Can anyone help me out with this one?
Thanks.
deep
More and more often, I am seeing this error message in RS subscriptions. I would assume it means the IIS server can't connect to the corporate exchange server. However I was wondering if there is some timeout setting/configuration in RS or the IIS server (or any other kind of setting) I can change to help alleviate this problem.
Has anyone else experienced this? Or know how to fix it?
Thanks,
Jeff
UPDATE: After looking closer at the subscriptions, I have noticed that subscriptions set up by a RS Admin (who is also a server admin) seem to be working fine. It is the subscriptions that are set up by ordinary users that are failing...
Hi all,
We receive this error from all subscriptons on this server. Any advice?
Error: "Failure sending mail: Interface not registered "
Thank you,
-Randy
I am Getting this error in SSRS Report Subscription. I went to Subscription table Checked the Laststatus. The LastStatus is :Failure sending mail: The specified string is not in the form required for an e-mail address.Mail will not be resent.
View 3 Replies View RelatedI have a job that runs every 3 minutes. The email that I received said the job failed at 10:30 a.m. but when I run the "All executions report" I see a skip in the times from 10:27 to 10:33. That failed Job is not logged as an execution.I looked in the system event log and I do not see anything odd at that time.
View 2 Replies View RelatedI am trying to create subscription on report manager.
Getting this error: "Failure sending mail: The transport failed to connect to the server. ".
how to resolve this..
I have the following code on a form:
<asp:SqlDataSource ID="building_a" runat="server" ConnectionString="<%$ ConnectionStrings:vol1ConnectionString4 %>"
SelectCommand="SELECT [E_MAIL] FROM [Sheet4$] WHERE ([BUILDING] LIKE '%' + @BUILDING+ '%')" OnSelecting="building_a_Selecting">
<SelectParameters>
<asp:Parameter DefaultValue="a" Name="BUILDING" Type="String" />
</SelectParameters>
</asp:SqlDataSource>
<asp:SqlDataSource ID="building_b" runat="server" ConnectionString="<%$ ConnectionStrings:vol1ConnectionString4 %>"
SelectCommand="SELECT [E_MAIL] FROM [Sheet4$] WHERE ([BUILDING] LIKE '%' + @BUILDING+ '%')" OnSelecting="building_b_Selecting">
<SelectParameters>
<asp:Parameter DefaultValue="b" Name="BUILDING" Type="String" />
</SelectParameters></asp:SqlDataSource>
<asp:TextBox ID="subj" runat="server" Width="500px">Subject</asp:TextBox><br /><br />
<asp:TextBox ID="messg" runat="server" Rows="20" TextMode="MultiLine" Width="500px">Message</asp:TextBox><br /><br />
<asp:Button ID="bldga" runat="server" Text="Building A" OnClick="Button1_Click" /><br /><br /><asp:Button ID="bldgb" runat="server" Text="Building B" OnClick="Button2_Click" /><br /><br />
<asp:Label ID="resultLabel1" runat="server" ForeColor="red"></asp:Label>
And I have the following code behind:protected void Button1_Click(object sender, EventArgs e)
{SmtpClient smtpClient = new SmtpClient();
MailMessage message = new MailMessage();
try
{MailAddress fromAddress = new MailAddress("me@mydomain.com", "My Name");MailAddress toAddress = new MailAddress("them@theirdomain.com");
message.From = fromAddress;
message.To.Add(toAddress);
message.Subject = subj.Text;message.IsBodyHtml = false;
message.Body = messg.Text;smtpClient.Host = "myhost";
smtpClient.Send(message);resultLabel1.Text = "Email sent!";
}catch
{resultLabel1.Text = "Send failure";
}
}
The queries get e-mail addresses from a SQL database for all people who work in a particular building.
The buttons will send an email if I give a To address.
How do I write the code so that clicking on the "Building A" button will send the e-mail to the addresses from the query results individually?
Any ideas?
I recently started working on SSIS packages and I have a package which will Validate a table records and prepare a txt file with all details and sends the email to approriate email ids. The problem i'm facing is I'm getting System.Net.Mail.SmtpException with inner exception as A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond xx.xx.xx.xx:25. I'm using SMTPConnection and Windows Authentication as credentials.I also add the ISServerExec.exe to the firewall exclusion list still it throws the same error.
View 3 Replies View RelatedInstalled SQL Server 2000 Enterprise trial a week ago on XP Pro. Installed new Seagate 80G HD; used Seagate's utility to copy old C: to new drive as new boot drive. All seems to work fine, except, when booting up, SQL server doesn't start. When I try to start it manually I get the following:
Could not start SQLSERVER service on the local computer. Error 3: the system cannot find the specified path.
1. What could be wrong?
2. How do I fix it?
Installed SQL Server 2000 Enterprise trial a week ago on XP Pro. Installed new Seagate 80G HD; used Seagate's utility to copy old C: to new drive as new boot drive. All seems to work fine, except, when booting up, SQL server doesn't start. When I try to start it manually I get the following:
Could not start SQLSERVER service on the local computer. Error 3: the system cannot find the specified path.
1. What could be wrong?
2. How do I fix it?
Hello,
On the development server, I am trying to work with subscriptions . Report Server is windows authenticated.
When no paramters exist for the report, the sucbscription is successful.
But if there are paramters for the report, email delivery fails.
These are not data driven subscriptions.
Did anyone face the same problem ? Can anyone tell me where to start debugging since logfiles just say failure to send the email.
Thanks,
SqlNew
I have to send mail with HTML format and attaching multiple files dynamically via send mail task.
View 10 Replies View RelatedLokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
Hi every body
I want to send a simple mail using DATABASE MAIL feature in SQL SERVER 2005.
I've defined a public profile.
I've enabled Database Mail stored procedures through the Surface Area Configuration .
but I can't send a mail with sp_send_dbmail stored procedure in 'msdb' database .
when I execute sp_send_dbmail in the Managment Studio the message is
"Mail queued" but the mail is not sent.
Could it be related to Service Broker?Because the Surface Area Configuration indicates:'this inctance does not have a Service Broker endpoint'.If so, how should I make an endpoint?
here is the log file after executing sp_send_dbmail:
1) "DatabaseMail process is started"
2) "The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2007-03-08T00:49:29). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it)."
The DatabaseMail90.exe is triggred ,so the mail is transfered to the mail queue but DatabaseMail90.exe couldn't give the mail to SMTP server.The promlem is what should I do to make DatabaseMail90.exe able to connect to the server?
please help me.
POUYAN
Hi.
I have problems with sending a mail from SQL Server:
SQL Mail starts.
Command: xp_sendmail 'MRudyk','Halo!'
returns:Unknown recipient: Parameter '@recipients', recipient 'Mrudyk'
'Mrudyk' is valid recipient...
I have written a stored procedure which should send mail from the stored procedure in sql server 2005. Here is the SP
set ANSI_NULLS ONset QUOTED_IDENTIFIER ONgo
ALTER Procedure [dbo].[sp_SMTPMail]
@SenderName varchar(100),@SenderAddress varchar(100),@RecipientName varchar(100),@RecipientAddress varchar(100),@Subject varchar(200),@Body varchar(8000),@MailServer varchar(100) = 'smtp.mail.tspl.com'
AS
SET nocount on
declare @oMail int --Object referencedeclare @resultcode int
EXEC @resultcode = sp_OACreate 'SMTPsvg.Mailer', @oMail OUT
if @resultcode = 0BEGINEXEC @resultcode = sp_OASetProperty @oMail, 'RemoteHost', @mailserverEXEC @resultcode = sp_OASetProperty @oMail, 'FromName', @SenderNameEXEC @resultcode = sp_OASetProperty @oMail, 'FromAddress', @SenderAddress
EXEC @resultcode = sp_OAMethod @oMail, 'AddRecipient', NULL, @RecipientName, @RecipientAddress
EXEC @resultcode = sp_OASetProperty @oMail, 'Subject', @SubjectEXEC @resultcode = sp_OASetProperty @oMail, 'BodyText', @Body
EXEC @resultcode = sp_OAMethod @oMail, 'SendMail', NULL
EXEC sp_OADestroy @oMailEND
SET nocount offexec sp_smtpmail 'ramana','venkataramanaiah.uppalapati@tspl.com','rajan','ramana.u@gmail.com','test','This is a sample message'
when i execute the SP by giving the following input parameters like
exec <spname> 'rajan', 'rajan.crp@tspl.com', 'venkat', 'venkat@tspl.com', 'test', 'Test Message'
It ran successfully but the recepient venkat@tspl.com did'nt receive any mail from rajan.crp@tspl.com
I used the following commands for configuring OLE Automation Procedures
exec sp_configure 'Show
I am having a problem with SqlServer 7.0 sending mail when the sqlserver account is not logged into the machine and mail is open. If I log off of the box and an alert sends mail it just sits in the outbox of the mail client until I log in. Is this the way it is supposed to be or am I doing something wrong. I am using the Inbox as my client.
Thanks
Tom Goltl
Hi,
I am using SQL Server 2005. I have configured my email on Database Mail. when I am trying to send email using xp_sendmail I am getting problem error as:
Msg 17925, Level 16, State 1, Line 0
xp_startmail: failed with mail error 0x80040111
I am using following sql statement
master.dbo.xp_startmail 'myaccount','mypwd'
master.dbo.xp_sendmail 'tomail1@mail.co.in','test'
where myaccount and mypwd is my password on my email profile.'tomail1@mail.co.in' is the destination email address..
thanks
Hello all,
I've run into a situation which I'm not sure which option to use. I have a web-based app that needs to send an email to a user once an auction has ended (the user being the winning bidder). The backend of the app is SQL 2005. I'm trying to figure out how to get this to work but I'm not sure if I should be using Database Mail or if I should be using a windows service on the web server that pings the database to check if the auction has ended and if the user has been notified. Can anyone shed some light as to which way I should be doing this? Additionally, I'm planning on formatting the style of the mail message so it'll need to be in HTML format and not plain text.
Any help is greatly appreciated.
Regards,
Axel
I need help regarding how to send mails through SQL server. Let me give you some more details: I am having a table where in all the e-mail id's are stored so i need to write a stored procedure that will pick up the email id from the table and it has to send the mail once you run the stored procedure.
Any help in this regard will really help...pls help me out...
Hi,
I have few DTS package schedule on my SQL Server 7. When the DTS fail, it's supposed to send an e-mail to me. But, for an unknown reason, the server send me some e-mail to report the failure of the DTS and suddenly...nothing. The server stop sending e-mail to report the failure of the DTS package. I decided to restart the Server and... i receive over 300 e-mails that i was supposed to receive 3 week ago about the failure of the DTS package. It's not the first time that this problem occur and everytime i need to restart the server, now i am tired of that.
Does anyone have see this problem before?
Martin
Hai to all.,
Im trying to send mail from Sql server but my efforts were ended in vain can any one help me on this.,
I have done the coding lik this..
step 1:
use master
go
sp_configure 'show advanced options',1
go
reconfigure
go
sp_configure 'Database Mail XPs',1
go
reconfigure
go
Step 2:
EXECUTE msdb.dbo.sysmail_add_account_sp
@account_name = 'Admin', -- Account Name on SMTP (User Defined)
@description = 'Mail Account for Database Mail',-- Account mail description. (User Defined)
@email_address = 'chandrubrave@gmail.com',-- Mail sender E-mail address (User Defined)
@display_name = 'Admin', -- Mail Sender display name, which displays, when mail received by recipient (User Defined)
@username= '', -- SMTP Sever User Name
@password='', -- SMTP Server Password
@mailserver_name = '190.160.110.50' -- SMTP Server Address'.
step 3:
EXECUTE msdb.dbo.sysmail_add_profile_sp
@profile_name = 'New profile',
@description = 'Profile used for database mail'
Step 4:
EXECUTE msdb.dbo.sysmail_add_profileaccount_sp
@profile_name = 'New profile',
@account_name = 'New Admin',
@sequence_number = 1
Step 5:
EXECUTE msdb.dbo.sysmail_add_principalprofile_sp
@profile_name = 'New profile',
@principal_name = 'public',
@is_default = 1 ;
Step 6:
declare @body1 varchar(100)
set @body1 = 'Server :'+@@servername+ ' My First Database Email '
EXEC msdb.dbo.sp_send_dbmail @recipients='chandramohanc@zylog.co.in',
@subject = 'My Mail Test',
@body = @body1,
@body_format = 'HTML' ;
I have got a response like --Mail queued.
But i dint get any mail and also in msdb.dbo.sysmail_event_log table have got an entry with description fails ..
Sorry for posting such a long post..
Thanks In advance
Hi All,
I'm trying to send mail from sql server I searched the net and i have some things needs calrification and help
What is the difference between sqlmail and sql agent mail ?
is it possible to use and configure them with out having OutLook installed on the server?
when creating a mail profile to be used by SQL mail this profile must be created under the account that runs SQL SERVER Service .. must this account be authenticated under Exchange server if i connect to it ??
to connect to Microsoft Exchange Server can i use the XPSMTP or i have to use SQL MAIL ??
Too much questions i Know but i appreciate your help any way
Hi,
i want to send Mail from sql server.which means that when i execute an query a mail will send to mentioned e-mail.is it any predefined function is there?.if,yes,can u explain Detail.
Regards
Umapathy
I need to find a way to send mail in blocks of 100 and 500 at intervals of 120 seconds. Does anyone know of any code for this?
Thanks!
Etymon