How To Generate A Report Containing Multiple Single Page Reports
Mar 14, 2006
I am using SS 2005 RS. I am able to generate single page pdf reports by passing "id" as a parameter. Now I need to send multiple ids as parameter and generate one big report which would contain reports for all the ids supplied on separate pages. Is this possible? If yes, then how do i do this.
What I have tried so far is, I created new report with a list control and added single page report as a subreport to this list control and grouped this list control using id parameter. When i send multiple ids in the parameter, for example 3 ids, it generates 3 page report but only for the first id. So it generates report for the first id and repeats same report 3 times.
Thanks for your help,
View 9 Replies
ADVERTISEMENT
Jul 20, 2007
Hi,
I have an application wherein I need to generate a single report(possibly in PDF format) which contains more than one report. Iam using SSRS 2005. In my application Iam using report server url to render reports. The below is URL for rendering single report.
http://servername/ReportServer/Pages/ReportViewer.aspx?reportname&rs%3aCommand=Render&rs%3aFormat=HTML4.0&rc%3aToolbar=true
Is it possible to render multiple reports into a single report ?
Can anyone help me in this regard ?
Thanks,
S V Ramakrishna
View 2 Replies
View Related
Sep 8, 2015
So I get the basics, have a script that can deploy a single report to a single server. I have other simple scripts that work as well. Now I want a script that can deploy a single report to multiple Sharepoint servers. I have about 30. I know we are probably doing this wrong, as in, we shouldn't be deploying the same report to 30 sites, as they are all all technically all on the same server however they are all independent site collections so as far as I know there is no way to deploy them to a central location and then link to them from each site.
So I tried to copy elements of my single report deploy script and duplicate the Sub Main() to Sub Main1() and Sub Main2() with multiple "ParentPath1" dims, yes I know I'm stupid. That obviously didn't work. So looking at some other scripts including my own subscription updater and I'm sure I need to do some kind of "For Each item in X" but where to start. The other lists I've seen all come from rs.Something. My list is just 30 variables in the script, how can I say for each site in this list, Publish this report?
Here's the simple script that works fine. I just don't know how to modify it to make it deploy this to multiple sites. After I figure that out, I was going to accept the challenge of deploying multiple reports to multiple sites in a single script...
Dim warnings As Warning() = Nothing
Dim parentFolder As String = "Reports"
Dim filePath As String = "filepath"
Dim reportName As String = "Report file name"
Dim parentPath As String = "Sharepoint site URL"
Public Sub Main()
[Code] ....
View 2 Replies
View Related
Feb 13, 2007
Is this possible?, i hope it is:). Your help is very much appreciated.
View 2 Replies
View Related
May 16, 2008
Hi All,
In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
Thanks
dotnetdev1
View 5 Replies
View Related
Jan 15, 2007
Dear all,
I have a package in which, when a Cost Center has X as a value, I must insert not X but many different Y value, which are associated with X. How can I gather and treat those Y values? Only using a Script Component?
Regards,
Pedro Martins
View 1 Replies
View Related
Mar 26, 2015
I'm trying to generate a single record that shows the status of an accounting period for multiple groups. For a single accounting period they could all be the same, or all be different (open, closed, hold, etc)
What I want to do is select the accounting period with a group by that says if all the groups are in the same status, then that's the status. But if there are different status' for the period, I just want to have a single line that says 'Mixed' The query below returns 3 records, but I only want 2. I tried a CASE WHEN Having COUNT > 1 but it blew up with an aggregate subquery in a group by error.
DECLARE @AccountingPeriod Table
(AccountingPeriod varchar(10), Status char(1), GroupNum int)
Insert into @AccountingPeriod
Values('2015-03','O',1),
('2015-03','O',2),
('2015-03','O',3),
('2015-02','O',1),
('2015-02','O',2),
('2015-02','C',3)
Select AccountingPeriod, Status from @AccountingPeriod
GROUP BY AccountingPeriod, Status
View 3 Replies
View Related
Apr 24, 2008
Hi
I am generating a Report by using SSRS. I am making using use of SSRS Report Viewer control for displaying the report. Which has an option to export the generated report in PDF format. Instead of displaying the report in by using report viewer I want to generate it directly in PDF format whenever that report is selected from the list of reports. So is there is any way to generate the report directly in PDF format which prompt a pop up for opening or saving the PDF?
Thanks,
Shailesh
View 3 Replies
View Related
Oct 3, 2007
I have a report that is 8 pages. After I upload the report to the intranet, I always have to click on "next" to see the next page. This is very troublesome, is there a way that I can show all the data on one page so that I can look at it without having to click "next" several times?
Thanks,
Steven
View 3 Replies
View Related
Dec 10, 2007
I have a report which is multiple pages in the report viewer. Now I want to make it shown in the webpage report viewer just in one page. Is there any ways to realize it?
Thanks
View 1 Replies
View Related
May 21, 2006
Hi,
I'm getting blank page when I open the Report Manager: I've got a header - "...Reporting... HOME", and then just empty space.
I had it working fine a week ago. Any ideas?
The RS runs on Win2003 Std, SQL 2005 Std.
Thanks
View 26 Replies
View Related
Nov 5, 2007
How do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.
Currently, only the first value is showing on the report.
Thanks.
View 1 Replies
View Related
May 31, 2007
The version of Report Builder I have will only let me choose from a very limited range of layouts. For example, the tabular layout displays a single table on a page.
Is there a way to produce a report containing two tables and other fields?
For example, I would like to create a very simple customer report with customer name and address at the top, then a table containing all contacts I have for the the customer (a 1:N sub-table of customer) and then a second table containing all the orders from the customer (a 1:N sub-table of customer).
Is this possible in the current version of Report Builder or is it planned in a future relase?
P.S. I know this is easy in VS Report Designer but I specifically want to do this in Report Builder. The Report Designer client is simply too complex for my non-technical user base. Report Builder would be ideal.
View 3 Replies
View Related
Sep 11, 2014
how to count from multiple tables. So currently I pull two separate reports to show the count of TaskIDs by customer state and another to show WrapID by Customer state for last month:
TaskID Count by Customer state Query:
---------------------------------------
SELECT CU.CustomerState as 'State'
,Count (CM.TaskID) as 'CaseCount'
From Customer CU
LEFT OUTER JOIN ACN_CCPCaseManagementTask CM ON CU.CustID=CM.CustID
[code]...
I am wanting to add both these counts into a single report so i tried the follow query but the counts don't match to the reports I pull separately.
SELECT CU.CustomerState as 'State'
,Count (CM.TaskID) as 'CaseCount'
,Count (CW.WrapCodeID) as 'WrapCount'
From Customer CU
LEFT OUTER JOIN ACN_CCPCaseManagementTask CM ON CU.CustID=CM.CustID
LEFT OUTER JOIN acn_ccpwrapcode
[code]....
View 2 Replies
View Related
Jan 25, 2008
In my form i have a list box and i need to display paticular records of all employees I selected.So please tell me how to pass multiple values from a single parameter.
currently i am able to pass single value through a parameter using following code
osqlreport.reportViewer1.ServerReport.ReportServerUrl = new Uri("http://localhost/reportserver");
osqlreport.reportViewer1.ServerReport.ReportPath = "/employee/5_0emplyeedata";
List<Microsoft.Reporting.WinForms.ReportParameter> paramList = new List<Microsoft.Reporting.WinForms.ReportParameter>();
string stritem;
stritem = Convert.ToString(this.lstSelectedData.Items[0]);
paramList.Add(new Microsoft.Reporting.WinForms.ReportParameter("paraempno", stritem, false));
osqlreport.reportViewer1.ServerReport.SetParameters(paramList);
osqlreport.reportViewer1.RefreshReport();
osqlreport.Show();
what changes do i need to do to make it work.(lstSelectedData is my list box)
View 3 Replies
View Related
May 7, 2008
I am using SQL RS 2005. I have a report that is using multiple data sources from different offices. I can add these data sources in my report but is it possible that I can select a specific data source based on a selected parameter value. In this case user from each office, select their office location and be able to see the data from their office. I would appreciate any suggestions.
Sal
View 5 Replies
View Related
Sep 3, 2007
Hi ,
I have a Report which has 8 stored procedures to get 8 resultant data sets . the stored procedures are almost similar such that they have only difference is the where clause and column getting returned.
So ,every stored access same set of tables and temporary tables getting created to store some set of active data derived from big table.
what happening is ,when i run the stored procedures individually in query analyser ,it is taking the time which is accepatable individually,but when i keep them in the same report. it is taking the time which is equal to sum of all the times taken by the stored procedures ran individually in query analyser which is some what not acceptable
can anybody through an idea,what can be done here. i already thought of locks and kept set transaction isolation level read uncomitted for all the stored procedures.but the time taking is same.
please help me here,i am stuck
Thank you
View 1 Replies
View Related
Jun 22, 2007
I have multiple data sources that I would like to use for a single report. The data sources are separate due to security requirements. I have a table that I can get the Initial Catalog from. How do I get that field from the database into the data source connection string at run time?
I saw this link here but the light bulb didn't go off:
http://technet.microsoft.com/en-us/library/ms156450.aspx
"define a query that retrieves a list of data sources at run time"
Can somebody help me out here?
TIA,
Darren
View 13 Replies
View Related
Oct 2, 2006
The goal is to produce a single PDF consisting of a number of subreports. Some are landscape, others are portrait. The subreports may also be run as independent reports. The master report that contains them defaults to the width of the widest subreport, which is landscape. This causes all portrait subreports to spill over producing blank pages. Are there any work-arounds to concatenate multiple, single report PDFs into a single PDF and have page numbering too?
Thanks!
View 11 Replies
View Related
Feb 6, 2008
Ok,
I am writing an app that will allow a user to select various information for displaying in a report. The sql is dynamically generated when the user clicks on "Get Report". Currently, I am using a gridview with a datasource and I pass the query to the datasource and it displays in the grid view. However, our company has expressed a need to migrate reporting to SSRS.
Is there any way that I can use dynamic sql with a template report and feed the dynamic sql to it so that all I would have to do is write a single rdl or rdlc and pass it the sql?
Alternatively, is there a way to have One ReportViewer show multiple parameterized reports. Ie. User selects the report from a dropdown and then selects the parameter options from other dropdowns and when they click "get report" it loads the chosen report with the parameters?
Thanks in advance.
View 4 Replies
View Related
Sep 25, 2007
I have a report with 5-6 tables showing different summary information. These are set up to all go one after another and there are no page breaks. The only instance I would like a page break is if a table content is getting split cross pages. Is there a way for me to specify that a table will be on a new page if it is broken accross multiple pages?
(This is due to Row growth, not column growth)
(KeepTogether is set to true)
Any help is greatly appreciated.
View 3 Replies
View Related
Mar 30, 2007
I would like to know if it is possible to have different applications on separate report servers sharing one report server database. If so are there possible issues or ptfalls to this type of architecture?
Thanks,
thecoleman
View 3 Replies
View Related
Jan 24, 2008
Does anyone know if it is possible to have text in a single table cell where the first field is formatted in italics and the second is in normal?
eg: = Fields!firstname.Value(as italic) & " " & Fields!lastname.Value(as normal)?
shidot
View 5 Replies
View Related
Sep 15, 2015
I'm trying to create a report that will be data-driven and produce multiple reports based on a parameter. For example, 5 reports go out today based on invoice numbers from yesterday. Each invoice can have multiple trasnsaction lines and each line contains the invoice number. What I have so far is only taking the first invoice number (let's say it has 10 transactions) and sending me the same report 10 times and stopping.
I get nothing for the remaining 4 invoices/reports. Here is what I have. To me this should enter the distinct invoice no's from yesterday into #temp, while a invoice no exiists begin query with one invoice selected from #temp then delete that invoice no and select another one and repeat till no more invoice no's. But it's only going through the one invoice no.
select distinct InvoiceNo
into #temp
from table
where Invoicedate between getdate()-1 and getdate()
declare @InvoiceNo VARCHAR(25)
[Code] ....
View 0 Replies
View Related
Feb 19, 2008
hello to all..
can someone tell me how I counld get a pagefooter linked textbox to show a data bound
page footer in a report having 8 tables....???
I have tried the common solution showed on the previous forums..
They worked when there was only one table...
where in i could place a group in 1 of the cells in the table body of the report.
but now since der are 8 tables in the report.. d job is become very tricky.
the page footer is not showing up on all the pages of the report.
it only shows on the first page of the report.
Plz help......
Regards
Savio.
View 1 Replies
View Related
Jun 1, 2015
Is it possible to have different chart (having their dataset from same shared datasets) like six on one report, then secondly can they all respond to same parameter filter.
View 3 Replies
View Related
Apr 2, 2007
Hi All,
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
Any Solution?
Thanks and Regards
Pragash
View 1 Replies
View Related
Feb 14, 2008
Fit an intere table in same page without page break for save the excel export.
My table has a Group for order my dates.
I need to have the intere table in the same page, i don't care about blank space at the end of the page.
I can't use the page break beacuse i need an excel export in a unique sheet..
I have tested.. every page break..you'll have a different sheet in your excel export
I need something like this
page 1
Zone
1
2
3
4
5
6
7
7
8
9
..
page 2
Zone
1
2
3
4
5
6
7
7
8
9
..
but an unique sheet in the excel export
View 4 Replies
View Related
Nov 22, 2007
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports
Report that links to another report
Both reports return more than one page
Reporting Services installed
Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
View 6 Replies
View Related
May 5, 2008
in the report data base one stored pocedure is there they generating daily reports from there
in other data base margin they are inserting daily data into the tables changing date wise
how to generate reports in sql server
View 1 Replies
View Related
Jan 30, 2007
Hi All,
I want to know how to generate a report from SSIS, for example, a report telling what has changed to a table.
Thanks,
TPK
View 4 Replies
View Related
Jan 9, 2007
Hi,
In my project i want a report. In that report data is getting from more than one data sources(systems). While creating data source view i used named query for both primary and secondary data source. But at the time of crating "Report Model" i am getting below error.
An error occurred while executing a command.
Message: Invalid object name 'Table2'.
Command:
SELECT COUNT(*) FROM (SELECT SerialNum, ModelNum AS com_model
FROM Table2) t
Is there any way to create a report with multiple data sources?
View 8 Replies
View Related
Nov 13, 2007
Hi all,
Is it possible to generate mulitple reports from parameter? what I want is for example: I have a report with a sales orders table, it has 2 input parameter fields; two dates to make up a date range. If the date range is between yesterday and today, I will get two reports (two reports with two different total page number); one is for yesterday and one is for today.
I did some research on resetting the total page, but their solution doesnt work on my special case (very complicate..). A similiar work out also apperciate.
Regards,
Bryan
View 3 Replies
View Related
