How To Place 3 Different Charts In One Single Report
Jan 21, 2008Is it possible to place Column chart, Line Chart and Pie chart in one single report with single/different datasets?
View 4 Replies
ADVERTISEMENT
Displaying Multiple Charts Using A Single Dataset
Jun 15, 2007
Hello,
I have the following tables :
Area
areano
areaname
Locality
locno
areano
RequestType
reqid
reqdtls
WebSummit
SummitId
RequestorName
DateOfRequest
reqid
Areano
I want to display the total no. of Addition, Removals and Relocations during the past 3 months in a paticular Area.
I have written the query for this.
select q.[areaname] as Area,
classCount as TotalCount, ReqType
from ( select a.areano,
a.classCount, ReqType
from ( select areano,
count(*) as classCount, reqdtls as ReqType
from WebSummit
join RequestType
on WebSummit.reqid = RequestType.reqid
where date_created >= dateadd(mm, -3, getdate())
group by areano, reqdtls
) a
join WebSummit b
on a.areano = b.areano
group by a.areano,
a.classCount, ReqType
) p
join Area q
on p.areano = q.areano
The query works fine and has been tested. Now I want to display this in chart format.
The display should be in a chart format, one for each area showing a bar for each RequestType.
I have placed "TotalCount" in the Data Fields section and ReqType in Category fields. How do I use the Filter to set an expression so that it displays the data in a seperate chart for each Area.
I tried using =Fields!Area.Value and set it to Area1 to display only Area1 values, however the preview shows nothing.
Plz help me out.
Here's some sample data
Area
AreaNo AreaName
1 Area1
2 Area2
3 Area 3
4 Area4
5 Area5
6 Area6
7 Area7
Locality
LocNo AreaNo
1 1
2 1
3 1
1 2
2 2
1 3
2 3
3 3
4 3
1 4
2 4
1 5
2 5
3 5
RequestType
reqid reqdtls
1 Addition
2 Removal
3 Relocate
WebSummit
SummitId RequestorName DateOfRequest reqid AreaNo
1 John 12/6/2007 1 1
2 Jack 13/6/2007 1 1
3 Bill 12/6/2007 2 1
4 Ben 12/6/2007 3 1
5 Dale 14/6/2007 1 2
6 Evjen 15/6/2007 1 2
7 Fuller 16/6/2007 2 2
8 Jimmy 16/6/2007 3 2
9 Kart 16/6/2007 3 2
10 Fuller 16/6/2007 3 2
Regards,
Vidya
Reporting Services :: Multiple Charts From A Single Dataset
May 20, 2015I'm looking to build a report that is basically a series of line charts that is plotting a value over time. Â I can accomplish this one chart/dataset at a time, but I believe with 'List's this can be achieved in a more automated fashion.If I have some data similar to this:
Area_ID, Location_Name, DataValue, ReadingDate
1,Site1,100,1990-10-10
1,Site1,110,1990-11-11
1,Site2,105,1994-01-07
1,Site2,105,1994-02-07
2,Site3,113,1994-06-02
2,Site3,120,1994-07-30
2,Site4,120,1994-06-30
2,Site4,120,1994-07-30
I want the charts grouped by the Area_ID, and then each Location_Name is a Series in that chart. Â So in this example, I would end up with 2 charts (Areas 1 & 2), each have 2 series (Area 1: Site1, Site2 and Area 2: Site3, Site4)Is it possible to build this with a list? or do I need to structure the data differently?
Report Pagination For Charts
Feb 15, 2007Hi,
We have developed few reports displaying data using chart layout. In the Data tab, we have specified MDX query that will return top 10 records.
But now, instead of restricting to just top 10 records, we would like to display all records and go in for pagination.
Is there some setting in the chart properties, where in I can display the first n records in first page, and the next n records( if available) in the next page and so on?
Can I specify the value of n somewhere in the propeties?
I read through many posts regarding pagination but those couldn't help me much.
Please help me in solving this problem.
Any help would be appreciated.
Thanks in advance!
Probelm With Report Charts
Sep 20, 2007
I have two data sets but from the same data source. I created two different tables from these two data sets. Now I want to include a chart too. But When I insert the chart, it gives a erorr message.
The dinfinition of the report/my report name is invalid.
More than one data set, data region or grouping in the report has the name'chart1_seriesgroup1'. data set, data region and grouping names must be unique within a report.
Does any body know why this happen?
Thanks
Charts No Longer Showing On Report?
Jul 11, 2007Hi, I have 8 charts on a report that no longer show up on the report.
the datasets they are based on still produce data when queried.
All I see is white space plus the textbox titles?
The charts are there in layout view and still correctly reference the right datasets and fields.
Charts Slow Report Rendering To A Crawl
Aug 23, 2006I've searched the forums on this issue, haven't really found the answer.
I have several nifty little sales reports which crunch a ton of data quite efficiently and render in just a few seconds in Report Manager. I've pushed as much of the data processing back to the server as possible, use a stored procedure (with parameters) in a shared datasource, don't return unneccessary data, all that. It works great.
When I first developed the reports, I continued generating my charts (which use the same data as the reports, just grouped differently) in Excel and pasting them in as images. Now I want to stop that nonsense and use the SSRS charts. I fooled around with the charting function and got a reasonable facimile of my Excel charts, two per report, which use their own separate stored procedures and the same shared datasource.
Now, reports that used to render in 5-8 seconds may take 1-5 MINUTES. Help! It's definitely the charts--taking them back out fixes the problem.
I have complete control over the datasources--would it make more sense to use non-shared sources, or to create totally separate shared sources? I saw a post that recommended "making data calls non-synchronous," but I have no idea how to do that.
Thanks for any suggestions.
Reporting Services :: Charts Not Visible In Report Manager
Aug 27, 2015I am able to preview my report in Microsoft Visual Studio with a chart embedded at the top of the report. However after uploading the report to Report Manager, the chart is blank. How can I get the chart to be visible in Report Manager? I am using SQL Server 2012 on a Windows Server 2012 R2 machine. I can see the chart if I edit the report in Report Building in the print layout mode. I can also see the chart in my Microsoft Visual Studio Project.
View 5 Replies View RelatedIs There A Place Where I Can Find The Events That Takes Place In Sql Server?
Jul 20, 2007Is there a place where i can find events that takes place in the sql server? Like adding data to a database or something like that....
Regards
Karen
Report Builder - How To Design Free Form Reports Other Than Tabular Or Matrix Or Charts
Nov 8, 2007Hi
Does any body know that creating free form rports using Report Builder is possible?
Free-form report - in the sense - that user should be able to drag the fields from the leftside fields pane and drop on body as we do in report designer using BI studio.
I could not figure out a way to do so. Is this a limitation?
Thanks
Raj Yennam
Multi-value Parameter In Master Report Passing To Single Param Sub-report In A List.
Aug 20, 2007Here's tricky one.
I have a fairly complex report that was given to me that was hard coded for single parameters. There is a dropdown for each market (created from a query in SSRS). The users have to run for each market each week.
Is there a way to use this report as a Sub-report inside a list of a master report and then use a mult-value parameter?
I want this multi-value parameter to build the values for the list and then run the "sub-report" for each value.
Essentially, I want to create a for each loop.
Any ideas?
Multiple 1:N Tables In Single Report Builder Report
May 31, 2007The version of Report Builder I have will only let me choose from a very limited range of layouts. For example, the tabular layout displays a single table on a page.
Is there a way to produce a report containing two tables and other fields?
For example, I would like to create a very simple customer report with customer name and address at the top, then a table containing all contacts I have for the the customer (a 1:N sub-table of customer) and then a second table containing all the orders from the customer (a 1:N sub-table of customer).
Is this possible in the current version of Report Builder or is it planned in a future relase?
P.S. I know this is easy in VS Report Designer but I specifically want to do this in Report Builder. The Report Designer client is simply too complex for my non-technical user base. Report Builder would be ideal.
Multiple Report Server Instances Sharing A Single Report Server Database
Mar 30, 2007I would like to know if it is possible to have different applications on separate report servers sharing one report server database. If so are there possible issues or ptfalls to this type of architecture?
Thanks,
thecoleman
Fit A Report On One Single Page?
Oct 3, 2007I have a report that is 8 pages. After I upload the report to the intranet, I always have to click on "next" to see the next page. This is very troublesome, is there a way that I can show all the data on one page so that I can look at it without having to click "next" several times?
Thanks,
Steven
Having Two Datasets In A Single Report
Jan 31, 2007Hi,
i have developed a report with sql reporting services 2005 which consists of two datasets in the same report.
Any performance issues it will cause?
Thanks,
Shanthi
Single Checkbox Possible When Report Parameter Is Yes Or No?
Dec 13, 2007it looks like a multi value parameter is the only kind of parameter that displays a checkbox.
A single checkbox for yes/no parameters are more intuitive to my users than 2 choices from a query.
I tried to set the multi value attribute on such a param but at run time get errors from a couple of places 1) expressions that reference such a parameter, seemingly confused about the value field being allowed to be either an object or an integer 2) unchecking the checkbox causes a prompt demanding that a value be set.
Does anybody have a trick or see what I am missing in trying to make a parameter act like a single yes/no checkbox in just one line of a dropdown parameter list?
Three Daily Schedules For A Single Report
Feb 6, 2007Hi,
I have been trying to figure this out for a while. I have a report that should run at 9AM, 12 Noon and 2PM every weekday. Due to the complexity of the report, I'm using snapshots. Since the lowest gap is 2 hours, I currently have it configured to create the snapshot every two hours. Since this is running all day, my servers are taking a lot of strain. In the report manager help, it suggests creating three daily schedules for the report. I cannot find a way to create more than one schedule for a report. Please let me know how I can do this. Any help will be highly appreciated.
Thanks,
Anand
Jump To Report && Multi Value Vs. Single Value
Mar 22, 2007I have a parameterized main report that contains a link to a sub report with parameters. Then from the sub report I have a link that takes you back to main report. If I use multi value parameters or single value parameters the links going back and forth between the two reports works just dandy, when I run it on my PC. However when I deploy the reports to the Web Server, the link going from the sub report back to the main report only works if the parameters are single select. Going from the Main to the Sub it doesn€™t matter.
This is the error I get using multi select parameters going from the sub report back to the main.
The path of the item "(null)" is not valid. The path must be less than 260 characters long and must start with slash. Other restrictions apply. (rsInvalidItemPath)
Any suggestions?
Count From Multiple Tables In A Single Report
Sep 11, 2014how to count from multiple tables. So currently I pull two separate reports to show the count of TaskIDs by customer state and another to show WrapID by Customer state for last month:
TaskID Count by Customer state Query:
---------------------------------------
SELECT CU.CustomerState as 'State'
,Count (CM.TaskID) as 'CaseCount'
From Customer CU
LEFT OUTER JOIN ACN_CCPCaseManagementTask CM ON CU.CustID=CM.CustID
[code]...
I am wanting to add both these counts into a single report so i tried the follow query but the counts don't match to the reports I pull separately.
SELECT CU.CustomerState as 'State'
,Count (CM.TaskID) as 'CaseCount'
,Count (CW.WrapCodeID) as 'WrapCount'
From Customer CU
LEFT OUTER JOIN ACN_CCPCaseManagementTask CM ON CU.CustID=CM.CustID
LEFT OUTER JOIN acn_ccpwrapcode
[code]....
Unable To Print The Report At Single Click
Jun 12, 2007
We are having a weird problem. User printing a report have to press the print button twice to print a report. It is causing some problem and failing in QA too :-(.
Please help.
How To Pass Multiple Value From A Single Parameter In Sql Report
Jan 25, 2008
In my form i have a list box and i need to display paticular records of all employees I selected.So please tell me how to pass multiple values from a single parameter.
currently i am able to pass single value through a parameter using following code
osqlreport.reportViewer1.ServerReport.ReportServerUrl = new Uri("http://localhost/reportserver");
osqlreport.reportViewer1.ServerReport.ReportPath = "/employee/5_0emplyeedata";
List<Microsoft.Reporting.WinForms.ReportParameter> paramList = new List<Microsoft.Reporting.WinForms.ReportParameter>();
string stritem;
stritem = Convert.ToString(this.lstSelectedData.Items[0]);
paramList.Add(new Microsoft.Reporting.WinForms.ReportParameter("paraempno", stritem, false));
osqlreport.reportViewer1.ServerReport.SetParameters(paramList);
osqlreport.reportViewer1.RefreshReport();
osqlreport.Show();
what changes do i need to do to make it work.(lstSelectedData is my list box)
Differentiate Between Fields Of TWO Datasets In A Single Report
Aug 22, 2006
Dear ppl,
I have got 2 datasets D1 & D2 in a Report. How can i differentiate between the fields of these two.
e.g. I got Name field in both the datasets. So when i do =Fields!Name.Value in a textbox the report gives me error
How can i tell the report from which dataset to pick up the field ??
Regards
Nabeel
Using Multiple Data Sources In Single Report.
May 7, 2008I am using SQL RS 2005. I have a report that is using multiple data sources from different offices. I can add these data sources in my report but is it possible that I can select a specific data source based on a selected parameter value. In this case user from each office, select their office location and be able to see the data from their office. I would appreciate any suggestions.
Sal
Multiple Stored Procedures,single Report
Sep 3, 2007Hi ,
I have a Report which has 8 stored procedures to get 8 resultant data sets . the stored procedures are almost similar such that they have only difference is the where clause and column getting returned.
So ,every stored access same set of tables and temporary tables getting created to store some set of active data derived from big table.
what happening is ,when i run the stored procedures individually in query analyser ,it is taking the time which is accepatable individually,but when i keep them in the same report. it is taking the time which is equal to sum of all the times taken by the stored procedures ran individually in query analyser which is some what not acceptable
can anybody through an idea,what can be done here. i already thought of locks and kept set transaction isolation level read uncomitted for all the stored procedures.but the time taking is same.
please help me here,i am stuck
Thank you
How To Merge Report Output Into Single File?
Mar 14, 2008Hi
I have read a few other posts about how to merge multiple report output files into a single document e.g. a single pdf.
There are a few approaches:
1) Generate post script files and then merge and oprint via a post script driver.
2) Generate seperate pdf files and then merge them into single document using a custom library.
I have a third idea and would appreciate any input:
Dynamically generate a RDL file that contains sub-reports, one for each report required in the final document, publish and run this as the final report. This could happen way before actually running the report i.e. the user has a tool where they select reports for a pack, tool then generates new RDL file and publishes it to sql reporting services, gets run at some later point in time.
Some challenges:
-Generate a table of contents with page numbering?
-Layout of sub-reports, not sure how they would be rendered across multiple pages?
-Managing parametes across sub-reports at run time.
Any suggestions or ideas?
Thanks
T
Is It Possible To Render Multiple Reports Into A Single Report ??
Jul 20, 2007Hi,
I have an application wherein I need to generate a single report(possibly in PDF format) which contains more than one report. Iam using SSRS 2005. In my application Iam using report server url to render reports. The below is URL for rendering single report.
http://servername/ReportServer/Pages/ReportViewer.aspx?reportname&rs%3aCommand=Render&rs%3aFormat=HTML4.0&rc%3aToolbar=true
Is it possible to render multiple reports into a single report ?
Can anyone help me in this regard ?
Thanks,
S V Ramakrishna
Single Report Multiple Data Sources
Jun 22, 2007I have multiple data sources that I would like to use for a single report. The data sources are separate due to security requirements. I have a table that I can get the Initial Catalog from. How do I get that field from the database into the data source connection string at run time?
I saw this link here but the light bulb didn't go off:
http://technet.microsoft.com/en-us/library/ms156450.aspx
"define a query that retrieves a list of data sources at run time"
Can somebody help me out here?
TIA,
Darren
Combining Multiple Subreports Into A Single Report
Oct 2, 2006The goal is to produce a single PDF consisting of a number of subreports. Some are landscape, others are portrait. The subreports may also be run as independent reports. The master report that contains them defaults to the width of the widest subreport, which is landscape. This causes all portrait subreports to spill over producing blank pages. Are there any work-arounds to concatenate multiple, single report PDFs into a single PDF and have page numbering too?
Thanks!
Adding Landscape And Portrait Subreports Into A Single Report
Sep 27, 2006The goal is to produce a single PDF consisting of a number of subreports. Some are landscape, others are portrait. The subreports may also be run as independent reports. The master report defaults to the width of the widest subreport, which is landscape. This causes all portrait subreports to spill over. Your suggestions / comments are appreciated.
Thanks!
How To Generate A Report Containing Multiple Single Page Reports
Mar 14, 2006I am using SS 2005 RS. I am able to generate single page pdf reports by passing "id" as a parameter. Now I need to send multiple ids as parameter and generate one big report which would contain reports for all the ids supplied on separate pages. Is this possible? If yes, then how do i do this.
What I have tried so far is, I created new report with a list control and added single page report as a subreport to this list control and grouped this list control using id parameter. When i send multiple ids in the parameter, for example 3 ids, it generates 3 page report but only for the first id. So it generates report for the first id and repeats same report 3 times.
Thanks for your help,
Report Generation Using A Single Dataset, Which Combines Two Tables.
Jan 18, 2008Hi,
I have an issue in generating the report in sql reporting services. I need to display a report in a table format. The datas of the table should be from two different sql tables. I have tried to write a stored procedure that returns two result sets from two different tables. As reporting services takes datas only from the first result set, i tried to write two different stored procedures each displays one result set. Then i have created two datasets with that two different stored procedure. Even then i cannot proceed as i was not able to use two different dataset in a single table because i was setting the datasetname to one dataset, when i try to retrieve the fields from another dataset i was able to retrieve only first and count values. Then i tried using sub reports. As sub reports for a dataregion(table) repeats for every row of the main report i was not able to fetch the correct datas. Atlast i have tried combining the query using join and wrote a single stored procedure. This stored procedure returns a single result set retrieves data from two tables satisfying the conditions. The issue i am facing with this is, the first table has only one row satisfying the condition and the second table has three rows satisfying the same condition, as i am using join query for the three rows returned by the second table the first table datas are getting duplicated for the rest of the rows in the second table. As I found using join query is the only resolution for the output which I need, and also I have to avoid the duplication of the records. Hence let me know for any solutions.
I have shown the sample datas that is duplicating which is indicated as bold. Phonenumber, Attemptdate and calloutcome are from first table and start time and endtime is from second table. As there are three different datas for the second table, first table datas are duplicated
Phone Number
Attempt Date
Call OutCome
Start Time
End Time
843-577-0800
2007-09-10 15:20:00.000
Contact with Prospect - Expressed Interest
15:08
15:12
843-577-0800
2007-09-10 15:20:00.000
Contact with Prospect - Expressed Interest
15:25
15:25
843-577-0800
2007-09-10 15:20:00.000
Contact with Prospect - Expressed Interest
15:26
15:27
Thanks for any help in advance
Thanks,
Sangeethaa
Report Does Not Load When Single Valued Parameter Is Changed ???
Jan 10, 2008Hi all,
I have a report running with both a db and Analysis services data source..When I change any of the multi-valued parameters a post-back is done and then the page is re-loaded all good. However. When I change one of the single value parameters a post-back occurs however the page said "Report parameter values must be specified before the report can be displayed. Choose parameter values in the parameters area and click the Apply button." If I THEN press APPLY the report loads perfectly with the selected option.
I have un-hidden ALL my parameters and they all seem to get values.. Does anyone have any clue what could be going wrong ?
Thanks.
Reporting Services :: Migrate Single SSRS Report Folder
Jul 30, 2015I have old sql server 2008 with reporting service and new one 2012 version and I need to move single report folder from old server to new server. Is there any tool or script can make that possible.
View 5 Replies View Related