I am using the flat file connection manager. I read in a set of flat files and copy them into a staging database table. I want to ignore anything in the text file past column 266. I can't get this to work correctly. I can't define the last column to end at 266 and ignore the rest. I tried adding an extra column but that did not work either.
Linda
Each day I receive a file with a different name. For example, the name is filename_mmddyyyy.txt where filename_ stays constant and mmddyyyy is the date of the file. The file is always in the same format.
I want to build an SSIS where I pass it this file name. I can write a script to generate the correct file name. How do I build the SSIS so it can accept the input parameter and find the correct file to process?
Thanks
I am trying to create a SSIS package with a csv flat file for the both the destination and source. I cannot control the source file. I need to be able to handle an extra comma in the source file which occasionally contains suffixes i.e. {John, Smith, Jr,} which could cause some records to be 9 fields and others 10. Any ideas?
View 1 Replies View RelatedBackground:
I am new to SSIS.
I have a data flow task within a For Each Loop Container.
Its reading a Demilited Flat File and inserting into a DB table.
The Flat File Source reads a specified folder and picks up all files with extension .txt
Question:
How can I record and save the file names the package picks up and loads it in ?
For eg:
If I have under C:Test folder
File1.txt
File2.txt
File3.txt
And the package picks up all the files above and loads them in, is it possible to read the file name its processing ?
I have a need to read these file names ( in this example File1,File2,File3 ) and store them in a DB table.
Appreciate your help.
Thanks in advance.
AkB
Hi All,
I want to know is it possible to have source as Flat File and destination as XML
Thanks in advance,
Shagun
Hi,
I'm wondering if there is any way to get SSIS to notice, in the Flat File Source, that a "Ragged right" text input file has a record that is too short to populate all the specified columns.
I am reading data from a file that is supposed to be fixed length records, but record 193,591 (out of approx. 500,000) is 20 bytes short of the fixed length (60 bytes). So I changed the input to "ragged right" and found that I can thereby continue to read the file, and load the data (after setting the "maximum errors" to a number greater than the initial "1"). (Without this change to "ragged right", every record after the bad one was "out of synch" with the column arrangement -- so they never made it into the database table destination.)
But the "failures" I am now getting are during the Data Conversion step, when I try to convert some columns to integers (from text, in the input stream). And by looking at the data with a "Redirect Row" setting for the Data Conversion step, I am able to see that the Flat File Source is reading "right past the end of the row."
Is there a way to get the Flat File Source to honor the CR-LF record terminator, and decide that some text columns should contain "nothing" (NULL or zero-length strings), rather than the bytes that contain the CR-LF and the initial text from the next record? Can this somehow be noticed as an error condition?
Dan
If I can select an input flat file via a dialog box, or it is necessary to either hardcode the file name or change the filename everytime to a similar format; &How can a query be run and processed in SQL right after input of a flat file to continue?
View 3 Replies View Related
Hi All SSIS experts,
Happy 2008!!!!
I am inserting data into a tab delimted text file using SSIS package.
After data insetion some extra tabs get added between columns in some rows in the text file.
Can we programmatically delete the extra tabs from the text file, if so how to use/implement the code inside the SSIS package?
Any pointer/suggestions are welcome.
Thanks & Regards,
Hi,
I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.
Did someone else faced this issue?
Thanks,
AQ
Hi all,
In a foreachloop, I am inserting records into a flat file which is working fine. But the thing is that as the file grows, it takes longer for it to locate the EOF(End of File) of the flat file so as to insert the records.
I have around 70-100 lines written to the file at each loop and there are more than 20k records to be looped. wihich means that at the end I should be having 1400k - 20000k line in the text file.
One solution would be to insert the records at the start of the file itself so that it does not has to lookup the EOF each time before writting.
Another would be to generate separate files and then merge it.
Any idea how can this can be done?
Beside this I have to zip the file and then SFTP to a given address.
Any suggestion or help would be welcome.
Rdgs
David
Hi,
I have a situation where a tab limited text file is used to populate a sql server table.
The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?
I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
Any inputs will be appreciated.
M.Shah
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
Nothing is wrong with package.
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better wway to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
Hi all,
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
thanx
Hi :
I want to transfer large data from access db into sql server compact , how can I do ? thanks a lot!
I have to value [CreateDate] in the data pump of my Flat File Source into my OLE DB Destination SQL Server Table. With a Variable within the SSIS Package or with a Derived Column task within the Data Flow between the Flat File Source and OLE DB Destination?
View 2 Replies View RelatedI'm moving data between identical tables and have to use a flat file as an intermediary. I thought: "No problem, SSIS can do a quick export to a file, then move the file to another server, then use SSIS to import the data to the new server."
Seems simple, right?
I'm hitting all sorts of surprising data conversion errors. I used the export wizard to create the export package. This works fine. However using the same flat file definition, the import package fails -- even when I have no destination. That is I have just one data flow task that contains only one control: the Flat File source. When I run the package the flat file definition fails with data type conversion and truncation errors. One of the obvious errors is for boolean types. The SQL field is a bit, SSIS defined the column as DT_BOOL, the output of the data are literal text values "TRUE" and "FALSE". So SSIS converts a sql datatype of bit to "TRUE" and "FALSE" on export, but can't make the reverse conversion on import?
Does anyone else find this surprising? I would expect that what SSIS exports, it can import given all the same table and flat file definitions. Is SSIS the wrong tool to do such simple bulk copies? I'd like to avoid using BCP because this process will need to run automatically within SQL Agent so we can leverage all the error tracking and system monitoring.
I have an source file and i have to load it into the data base by changing datatype of the columns in ssis
View 1 Replies View RelatedFirst, a couple of important bits of information. Until last week, I had never touched SISS, and therefore, I know very little about it. I just never had the need to use it...until now. I was able to convert my first 3 flat files to SQL2005 tables by right clicking on "SISS Package" and choosing "SISS Import and Export Wizard". That is the extent of my knowledge! So please, please, please be patient with me and be as descriptive as possible.
I thought I could attach some sample files to this post, but it doesn't look like I can. I'll just paste the information below in two separate code boxes. The first code box is the flat file specifications and the second one is a sample single line flat file similar to what I'm dealing with (the real flat file is over 2 gigs).
My questions are below the sample files.
Code Snippet
Record Length 400
Positions Length FieldName
Record Type 01
1,2 L=2 Record Type (Always "01")
3,12 L=10 Site Name
13,19 L=7 Account Number
20,29 L=10 Sub Account
30,35 L=6 Balance
36,37 L=1 Active
37,41 L=5 Filler
Record Type 02
1,2 L=2 Record Type (Always "02")
3,4 L=2 State
5,30 L=26 Address
31,41 L=11 Filler
Record Type 03
1,2 L=2 Record Type (Always "03")
3,6 L=4 Coder
7,20 L=14 Locator ID
21,22 L=2 Age
23,41 L=19 Filler
Record Type 04
1,2 L=2 Record Type (Always "04")
3,9 L=7 Process
10,19 L=10 Client
20,26 L=6 DOB
26,41 L=16 Filler
Record Type 05
1,2 L=2 Record Type (Always "05")
3,16 L=14 Guarantor
17,22 L=6 Guar Account
23,23 L=1 Active Guar
**There can be multiple 05 records, one for each Guarantor on the account**
and the single line flat file...
Code Snippet
01Site1 12345 0000098765 Y 02NY1155 12th Street 03ELL 0522071678 29 04TestingSmith,Paul071678 05Smith, Jane 445978N 05Smith, Julie 445989N 05Smith, Jenny 445915N 01Site2 12346 0000098766 N 02MN615 Woodland Ct 04InfoJones,Chris 012001 01Site3 12347 0000098767 Y 02IN89 Jade Street 03OWB 6429051282 25 04Screen New,Katie 879500
As you can see, each entry could have any number of records and multiples of some of the record types, with one exception, every entry must have a "01" record and can only have one "01" record. Oh, and each record has a length of 400.
I need to get this information into a SQL 2005 database so I can create a front end for accessing the data. Originally, I wanted one line for each account and have null values listed for entries that don't have a specific record. Now that I've looked at the data again, that doesn't look like a good idea. I think a better way to do it would be to create 5 different tables, one for each record type. However, records 2 through 5 don't have anything I can make a primary key. So here are my questions...
Is it possible to make 5 tables from this one file, one table for each of the record types?
If so, can I copy the Account number in record 01, position 13-19 in each of the subsequent record types (that way I could link the tables as needed)?
Can this be done using the SISS Import and Export Wizard to create the package? If not, I'm going to need some very basic step by step instructions on how to create the package.
Is SISS the best way to do this conversion or is there another program that would be better to use?
I know this is a huge question and I appreciate the help of anyone who boldly decides to help me! Thank you in advance and I welcome anyone's suggestions!
One people created a word input file (15 pages, including check boxes, text boxes, drop down lists...). Is it possible to save data in word input file to SQL table?
View 1 Replies View RelatedSQL 6.5
NT 4.3
Can someone assist me with the following....
1. I am attempting to export data from a SQL DB (single table using a query) to a "flat file".
2. I would then like to take this "flat file" and import the data into a different SQL DB (same schema structure as first DB).
Unfortunately this has to be done in two steps.
Thank you for your help.
RPowid
How do I put data into a text or excel file before I attempt a deleteion from a large table. I know how to select the necessary data, but i'm not sure about the t-sql required to put it into a file?
are there any better methods of archiving?
thanks
Hello,
I was wondering if there was a way for me to append data to a flat file. The reason why i ask this is because i need to create a header for the report that i am exporting.
The way i imagined this working would to be create a dts that would export the header information to a flat file and the create another dts to export the report data and appensd it to the same file that the header dts created. This might not be the correct approach so i was hoping i could get some guidance of how i can accomplish this.
I am using SQL Server 2000.
Thank you!
hi everyone!
i am currently creating a package which involves getting data from CSV files. i can successfully get the data from the files, my problem is, i need to get data from the header of the CSV files. i am currently skipping the header rows. the format of the CSV files is as follows:
-----------------------------------------------------------------------------------
Date, 20070704
Store Code, storeCode1
data row.....
data row.....
data row.....
-----------------------------------------------------------------------------------
technically, i also need the date from the header row, but since it is also indicated in the data rows, i have no problem with that. what i need is the Store Code, which is not indicated on the data rows. i need to store the data in a database in the following format:
-----------------------------------------------------------------------------------
StoreCode Date column1 column2 column3 ......
storeCode1 20070704 ...
storeCode2 20070704 ...
storeCode3 20070704 ...
-----------------------------------------------------------------------------------
any idea how SSIS can handle this? thanks a lot!
I'm using SSIS package to export some data to a comma delimited CSV file. The problem is that some of the fields have commas in them. Is there a way to deal with this other to changing the delimiter?
View 2 Replies View Relatedthe "flat file" destination is missing from the choices when attempting to
export data.
I am looking to import data into SQL Server 2005 using SSIS. I want to take data that is contained in a flat file and place it into the various appropriate tables in my system. The flat file contains nested data. For example...
Bob,Smith,555-5555,123~3.33|245~1.99,Active
So I want to build a package that brings in the records as follows
Client Table: First Name, Last Name, Phone, and Status (Bob, Smith, 555-5555, Active)
Order Table: OrderID, Amount (ID 123 @ $3.33 and another row ID 245 @ $1.99). If possible I would also like to tie the orders to the client record that was inserted.
My first question is if SSIS supports nested fields as in my example. Can it break a file by commas, then within a field by other delimiters? If so how do I do this, and if not what is the recommend way to accomplish this sort of task.
My second quesiton is if it can do that, can it tie the Client and Order data on the fly?
Thanks.
I have a flat file data source - call it "order". Its a text file that looks something like this:
ORDERNAME| Example1
CUSTOMER|Acme Industries
COST|11611
ITEMS
B1|550S162-43(33)|35.708|1|636
T1|550S162-43(33)|20.967|1|636
T2|550S162-43(33)|20.967|1|636
W1|350S162-43(33)|1.330|2|501
W21|350S162-43(33)|1.330|1|911
W2|350S162-43(33)|3.044|2|501
W20|350S162-43(33)|3.044|1|911
I would like to write the metadata to a [order header] table and the ITEMS to a [order detail] table. Can someone direct me to a example of something similar?
any suggestions on dealing with a flat file in the format below. I only want to process the data columns in the middle of the file and want to ignore all other rows. This was a very simple task in DTS with a small amount of VBScript in the transformation but it doesn't seem as straightforward in SSIS. thanks
......... file example ......
start-of-file
header1
header2
...
start-of-data
col0|col1|col2|col3|....
col0|col1|col2|col3|....
col0|col1|col2|col3|....
end-of-data
end-of-file
Is there away to use wild card in the file name for the flat file data source?
Like //servername/directory/*.txt
I'm trying to import some data from a data base table to a flat file. But I get a error message when I run BCP command in coomand line.
My bcp command is as follows.
C:Documents and Settingsshamen>bcp databasename.tablename out -c-f flatfile.txt -T MSSQLSERVER
When I run this, I get " an error has occired when connecting to the server. This faillure may be caused by default SQL server does not allow remote connection.
Then I Changed it as follows.
C:Documents and Settingsshamen>bcp databasename.tablename out flatfile.txt -T-c
Then I get " Unknow argument ' BCPfile.txt' on command line "
Does any tell me how to fix this?
Thanks