Hi,
Is it possible to get the month name with only an integer representation of the number.
i.e January ,February..... the DATENAME only takes a date as a value.
thanks in advance
This is my table and data
CVID | WorkExperience
--------------------------------
2838736
68181101
96568122
1135484
I need to convert into this result
CVID | WorkExperience
--------------------------------
283873 years
681818 years 5 months
9656812 years 2 months
1135484 months
Hi,I want to get the string representation of a hex number from avarBinary column of a table.For example I want to get the output : 'The Hex value is 0xFF'butselect 'The Hex value is ' + convert(varchar(10), 0xFF)retruns the ascii charecter for 0xFFAny idea how do I get the hex form as it is?thanks.Supratim
View 2 Replies View Relatedfor example which function can i use to convert the real number into the corresponding integers?
4.5 ->5
3.4->3
18.9->19
Thans
"number of you"??? Integer???? get it??? OK...it's early/late/whenever...
without the search function, I am unable to easily find what I am nearly sure is an easy one...
but...I am converting a CSV string to a table of integers using a stolen fn_CsvToInt function that returns a table of integers...found THAT on here earlier, b'gawd ;)
In any case, I am using IF (ISNUMERIC(yada) = 1) to validate that the sub-string of the input CSV list of number is, in fact, a number...but what I am after is INTEGERS only...so if someone sends in some stupid stuff (though I am SURE none of MY users would do such a thing ;) ) like:select * from fn_CsvToInt('1,43,5.7,byte_me,100)
what I want to return is 1, 43, 100 (ignoring the 5.7 and 'byte_me' entries in the list). However, using the ISNUMERIC allows the sneaky '5.7' entry past, and then I get an error trying to convert it to an integer later.
Any easy way to check for integers? Or do I need to whip out a quick fn_IsInteger UDF for my evil and exclusionary purposes?
Thanks!
Paul
Hi, I was wondering how I can have the integer og a number that haves decimals.
I tried with FLOOR and ROUND function but it didn't work.
Does anyone knows how to do this?
Thanks
Beli
I am facing problem with re numbering of field records in a table.I am having one table with below records.
sid(identity/primarykey) stickyId(Integer) UserId(integer)
102 0 171
103 1 171
104 2 171
105 3 171
here how to renumbering stickyId values when deleted particular stickyId from UI. Here stickyId field is Integer type only. not primarykey/identity field.
Hi Guys,
I'm trying to set up a report where the user can select a month, and the report will list the days and day numbers for that month. For example, if the user chooses August then the report will show:-
Wednesday 1st
Thursday 2nd
Friday 3rd
... etc
Can anybody help?
TIA.
Hi,
I'd like a function that returns the number of hours in a specific month (or the number of days which I could then multiply by 24). The function would have to consider leap years for February.
Any ideas?
Thanks,
Skip.
1. Counts the number of Saturdays in a month
2. Returns 12 rows, each row containing number of Saturdays for each month of the year
3. Single parameter for the specification of the year
hi need help
i have table employee
i need to change to the employee Once a month the number from 1 to 2 (once a month)
in the first day of the month evry month
and loop back to 1 . 2 .3 .4
evry month next number from 1 to 4
empid val_Number date
-----------------------------------------------------------
11111 1 17/01/2008
2222 4 19/12/2007
3333 3 19/12/2007
i need to see it like next month (in the first day of next the month)
empid val_Number date new_val
--------------------------------------------------------------------------------
11111 1 17/01/2008 2
2222 4 19/12/2007 1
3333 3 19/12/2007 4
TNX
Good Day to Everyone,
Need help!
I have this SQL table w/ fieldname "PayPeriod". Sample value of PayPeriod are SEP06-1, SEP06-2, OCT06-1, OCT06-2... Wherein the first 3 chars is the month, 06 is the year, 1 or 2 is the cutoff where 1 means the 2nd half of the previous month and 2 is the first half of the current month.
Now my questions are:
1.) How can I select these values sorted according to date. Since this is a character data type. Sorting is alphabetical. I need to sort it according to date where JAN05-1 is the first record and the last record is DEC06-2 (assuming that the oldest year is 05 and 06 is the latest).
2.) How can I convert the 3 char month into its number equivalent. Example, JAN is equal to 1, FEB is 2, MAR is 3....
3.) How can I count the no. of days in a month? Is there a function that would result to the no. of days in a given month?
Thank you so much in advance. :)
I want to build a string that contains today's date (without the time).
For example, if select GETDATE() returns 2008-04-28 14:18:34.180, I want to end up with either
(1) 2008-04-28
or
(2) 20080428. (I always want the month to be represented by a 2 digit number)
Is there a datepart parameter that will give me (1) in one shot? I don't think so, since datepart returns an integer and (1) is not in the form of an integer.
So, I was trying to build (2) by using the yyyy, mm, and dd parameters to extract out the appropriate parts and casting them to a string and contatentating them. However, when I do the month portion, (using mm) it gives me the integer that represents the month, and this number can be 1 or 2 digits depending on the month. I always want it to be a 2 digit number. For example, if I'm in Apr, I want to end up with "04", not "4". This would also apply to the day portion. (although the date that I'm writing this post is on the 28th so I'm not certain what GETDATE() will return on dates that are 1 digit.)
The only way I can get the single digit month to write out as a 2 digit month is by doing a LEN() function on the string and if it is a length 1, then concatenate a "0" in front of it. I started doing this and the expression became too crazy, so I wanted to first check to see if someone can come up with something cleaner.
Thanks for looking.
I have a query that counts the number of pay checks received in a month, but I need to compare that to the number of actual paydays in a month. If we were on a set pay schedule (i.e. the 15th of each month) it would be easy. Unfortunately that's not the case. We are paid biweekly on Fridays and our last pay day was April 4th.
So I need to know how many pay periods were in a specified month. For example, April would have 2 (April 4th and 18th), May would have 3 (May 2nd, 16th, and 30th), etc.
As always, your help is very much appreciated!
I am trying to determine the amount of days in a month to prorate a month end estimate.
We measure service calls and need to approximate how many we will have at month end.
I would like to automate a query to post on our web and need to know how many days are in the current month.
A possible solution would be to piece together a datetime variable using getdate and dateadd then use a datepart.
However , I don't know how to create a datetime variable this way.
Thanks in advance
I am having a problem transforming a data set to the structure I need. I have data in the following format.
Id Visit1 Visit2 Visit3 Visit4
1 2Mar2010 27Mar2010 24Apr2010 8Jul2010
2 2Apr2010 3May2010 4Jun2010 11Jul2010
I need to transform it into a table which gives a count of the number of subjects at each visit at the end of each month.
For example, in March there will be 1 subject at visit 2. In April, there will be a total of 2 subjects, 1 at visit 1 and 1 at visit 3. In May there will be 2 subjects, 1 at visit 3 and 1 at visit 2, etc.
Here is the table I was hoping to produce.
Date.....Subjects.......Visit1.....Visit2.....Visit3.....Visit4
March....1.............................1
April......2...................1.........................1
May.......2.............................1..............1
Jun.......2............................................2
Jul.......2...........................................................2
Hi 2 all,
I need to calculate the number of working days in a month. In clear, i need to ignore saturday.sunday and holiday in a month.
can anyone say the solution?
thanks.
Example table structure:
Id int, PK
Name varchar
AddDate smalldatetime
Sample data:
Id Name AddDate
1 John 01/15/2005
2 Jane 01/18/2005
.
.
.
101 Jack 01/10/2006
102 Mary 02/20/2006
First, I need to find the month which has the most records, I finally produced the correct results using this query but I am not convinced it's the most efficient way, can anyone offer a comment or advice here?
select top 1 count(id), datename(mm, AddDate) mth, datepart(yy, AddDate) yr
from dbo.sampletable
group by datename(mm, AddDate), datepart(yy, AddDate)
order by count(id) desc
Also, I'm really having trouble trying to get the overall average of records per month. Can anyone suggest a query which will produce only one number as output?
I have a column which stores a set of dates. I want to tell how many days left of a date till it’s month end. It should be noted that month ends are taken from the date series, not a calendar month end.
Something like below,
DateTD Days left
2009-01-05 14
2009-01-06 13
2009-01-07 12
2009-01-08 11
2009-01-09 10
2009-01-12 9
2009-01-13 8
2009-01-14 7
2009-01-15 6
2009-01-16 5
2009-01-19 4
2009-01-20 3
2009-01-21 2
2009-01-22 1
2009-01-23 0
2009-02-02 /
2009-02-03 /
I have a table which has name,Speciality,start date and end date. So each person may have 1/more rows .They will have more if they change their specialities. For example if you look at the data below.
AdjusterNameSpecialtyDatestartDateEnd
Test Inside Property2009-08-29 2010-07-31
Test Management2010-08-012012-07-31
If we see at the data above Test has 2 rows because he changed his specialty in the middle.My requirement is to calculate the total number of employees in each month for last 2 years in each speciality. For example if we look at the example above, Test was in Inside property from 2009 Aug to 2010 Aug but if i use just the date start and take the month for each adjuster it gives me the number of adjusters started in that year and month but what i want is Test should be counted in all the months for Inside property until 2010 07 month. Which means i want to have the total number of adjusters present by each speciality for each month of last 2 years .
Sample Data
SET NOCOUNT ON;
USE tempdb;
GO
CREATE TABLE CheckRegistry (
CheckNumber smallint,
[code]...
How can I get the result orderd by the month number?
DECLARE @varDate datetimeDECLARE @varMonthDate datetimeDECLARE @varYear datetimeDECLARE @varFOM varchar(10)DECLARE @NumDaysInMonth as intselect @varDate = '2/1/2004'select @varMonthDate = MONTH(@varDate)select @varYear = YEAR(@varDate)select @varFOM = CAST(CAST(@varMonthDate as int) as varchar) + '/1/' +CAST(CAST(@varYear as int) as varchar)select @NumDaysInMonth = DATEDIFF (day,@varFOM,DATEADD(mm,1,@varFOM))select @NumDaysInMonth as DaysInMonth
View 1 Replies View RelatedI want to show this kind of output
UserID UserName 1 2 3 30
OR
UserID UserName 1 2 3 31
user data saved in db select distinct UserID,Name from Userss Where IsActive=1 and order by UserID and i want to just calculate no of days in month based on year and month name supplied by user. one way i can do it. first i will create a temporary table and in loop add many columns to that table and later dump user data to specific column.
I am trying to create a script file that will get me the total number of orders in july. How exactly would i say july because i know my syntax is wrong and I would be using sum instead of count right?
What i tried
use Cis11101_Northwind
Declare @Julycount int
Set @Julycount= (Select sum(*) From orders Where OrderDate = 'july')
print 'The total orders for july is ' + Cast(@JulyCount as varchar)
I know that if I set the Package.MaxConcurrentExecutables Property to -1, it will execute the maximum number of concurrent running executables to equal the number of processors plus two.
I have a requirement where I have to run the maximum number of concurrent running executables. However, the number of concurrent executables to run varies each month (it is not fixed).
If I have a loop inside the package that executes each stored procedure (same sproc, different parameter), will SQL Server execute the maximum number of concurrent running executables possible? (It may execute 4 or 8 at a time and that is fine.)
Thanks,
Michael
We have some requirement in PowerBI reports. Here we have a table and having Date, Events columns. Below is the sample data..we are creating a measure to calculate the average of the event count for month.We need a measure for calculating Average of Event count per month= sum(Events for a month)/numberofdays in the month.Example for January month : sum(343423)/31 (31 number of days in January)
When we write this measure using DAX query in Excel we are getting semantic error.Tried sample formula : Average:=SUM([Events])/EOMONTH([EventDate],1)
writing this DAX command for measure.After having this data ready, we are creating PowerBI reports on this data.
I have a table with a column named measurement decimal(18,1). If the value is 2.0, I want the stored proc to return 2 but if the value is 2.5 I want the stored proc to return 2.5. So if the value after the decimal point is 0, I only want the stored proc to return the integer portion. Is there a sql function that I can use to determine what the fraction part of the decimal value is? In c#, I can use
dr["measurement "].ToString().Split(".".ToCharArray())[1] to see what the value after the decimal is.
Working on a new database where the Date and Time are stored in a Date Time Field.
Then working on an OLDER database file within the same SQL Database contains these 2 items as integers:
transDate = "71615" (July 16, 2015)
transTime = "12345" (01:23:45 AM)
How do we convert both of them into a single SQL DateTime field such as "2015-07-16 01:23:45.000" so that it can be used in a join restricting to a date time in a different SQL File that properly has the DateTime in it?
This works well for converting the transDate Part in the select statement:
dbo.IntegerToDate(at.transDate) as transDate
* That returns: "2015-07-16 00:00:00.000"
* The resulting data must work directly in a Microsoft SQL Server Management Studio Query using either using the "on" statement or part of the "where" clause. In other words, NOT as a stored procedure!
Also must be able to be used as a date difference calculation when comparing the 2 files Within say + or - 5 seconds.
I'm using SQL Server 2012 and I need to run a query against my database that will output the difference between 2 dates (namely, DateOfArrival and DateOfDeparture) into the correct month column in the output.
Both DateOfArrival and DateOfDeparture are in the same table (let's say GuestStay). I will also need some other fields from this table and do some joins on some other tables but I will simplify things so as to solve my main problem here. Let's say the fields needed from the GuestStay table looks like below:
I need my query to output in the following format:
How to write this query?
Hello what I'd like to display the following in a matrix report:
Parameter selected: 3 (March), 2008 (Year)
Monthly TO Summed up
ArtNo March <=March
1210 20,500 50,900
1220 21,200 64,000
1230 15,400 40,300
... ... ...
So, in the rows I have the articles and in the column the selected month via parameter. In another column I need to sum up all monthly values up to the selected month, meaning in this example the sum of jan, feb and mar per article.
Kinda general question -but before I embark on my own design I thought I ask around. . .
What I want to design is database representation of a schedule of a roster. For instance a school roster. I hope I am not being too general here.
My company is working on a bond derivative portfolio analysis tool andwe're facing a problem that I did not see adequately addressed anywhere in literature. I really did RTFM. I'm very experienced inrelational modelling (10+ years) so this is not a case of notunderstanding the principles. Here is the problem stripped ofirrelevant context. The problem below is simplified for the sake of theexample so don't sweat the details.THE PROBLEM1. There are many types of bonds, each type has a different set ofattributes, different attribute names, different attribute datatypes.For example, bond A has two variables: a yearly interest rate anddate of issue, B has five variables: an interest rate and 4 specificdates on which various portions of principal need to be paid, bond Chas a set of 4 variables: interest rate in period 1, interest rate inperiod 2, the date on which the bond can be put back to the issuer,and two dates on which the bond can be called by the issue. And so on.So, on the first attempt I could represent each bond type as its owntable. For example,create table bond_type_a (rate INTEGER, issue_date DATE)create table bond_type_b (rate INTEGER, principle_date1 DATE,principle_date2 DATE, principle_date3 DATE, principle_date4 DATE)create table bond_type_c (rate1 INTEGER, rate2 INTEGER, put_date DATE,call_date DATE)This is the nice relational approach but it does not work because:2. There are many thousands of bond types thus we would have to havemany thousands of tables which is bad.3. The client needs to be able construct the bond types on the flythrough the UI and add it to the system. Obviously, it would be bad ifeach new type of bond created in the UI resulted in a new table.4. When a user loads the bond portfolio it needs to be very fast. Inthe table per type approach if a user has a 100 different types if bondin the portfolio you would have to do 100 joins. This is a heavilymulti user environment so it's a non-starter. It's impossibly slow.THE SOLUTIONSSo now that we ditched the table per bond type approach we can considerthe followiing solutions (unpleasant from the relational point ofview):1. Name-Value pairs.create table bonds (bond_id INTEGER, bond_type INTEGER, attribute_idINTEGER, value VARCHAR(255))Comment: The client does not like this approach because they want torun various kinds of reports and thus they doe not want the values tobe stored as VARCHAR. They want the DB to enforce the datatype.2. Typed Name-Value pairs.create table bonds (bond_id INTEGER, bond_type INTEGER, attribute_idINTEGER, int_val INTEGER, string_val VARCHAR(255), date_val DATE_Comment: The client does not like this because the table is sparse.Every row has two empty fields.3. Link table with table per data type.create table bonds (bond_id INTEGER)create table bond_int_data (bond_id INTEGER REFERENCES bonds(bond_id),value INTEGER)create table bond_string_data (bond_id INTEGER REFERENCESbonds(bond_id), value VARCHAR(255))create table bond_date_data (bond_id INTEGER REFERENCES bonds(bond_id),value DATE)Comment: This meets most of the requirements but it just looks ugly.4. Dynamic Mappingcreate table (bond_id INTEGER, int_val1 INTEGER, int_val2 INTEGER,date_val1 DATE, date_val2 DATE, string_val1 VARCHAR(255), string_val2VARCHAR(255))Then you have to add some dynamic mapping in your code which willprovide bond specific mapping (say, stored in an XML file). Forexample,For bond_A: yearly_rate maps to int_val1, issue_date maps to date_val1For bond_C: rate1 maps to int_val1, rate2 maps to int_val2, put_datemaps to date_val1, call_date maps to date_val2)Comment: This is very good for performance because when I load aportfolio of different bond types I can pull them all in in one SELECTstatement. However this approach has a problem that the table issparse. The number of fields of each type has to be as high as toaccmodate the most complex bond while simple bonds will only be usingtwo or three.THE QUESTIONS:Are the four approaches I described above exhaustive? Are there anyother that I overlooked?
View 12 Replies View RelatedIn MS Access, for numeric fields, the decimal places shown can be defined as "Auto" meaning that the database will determine the number of decimal places to show based on the content of the field (i.e. 1.0, 0.75, 1.125).
In SQL Server for the same field, it appears that decimal precision is hard coded resulting in a fixed representation (i.e. 1.000, 0.750, 1.125)
Is there a way to make the decimal representation in SQL Server more like Access where trailing zeros are truncated?