Multiple Y-Axis Values In Report
Oct 23, 2006
I will try to explain this best I can. I have a report where it shows total number of pieces over time. This range is from 0 to like 100 pieces. I have done a UNION query to add average accumulation (in inches).
If adding average accumulation to the "Data fields" section of the report in report designer, It shows the average accumulation on the bottom in releation to the number of pieces. (which is what I want.. But.. ) The numbers are not proportional obviously there wont be 60 inches of snow.. more like 1 or two inches.. So the line is very close to the bottom almost invisible..
Now that ive dont a muck up job of explaining.. This is what im looking for.. Some type of chart that will overlay the average accumulation but somehow be smart enough to show the different scale of precipitation vs pieces of equipment.
VS 2003 SQL Server 2000
View 8 Replies
ADVERTISEMENT
Jan 14, 2007
I have a simple-column chart and in the x-axis I put the date values and in the y-axis the sale price values.
The chart works perfectly in the case when there is only one sale price for the same date. But, when the price changes during the same day, then there is problem. In the following example
x y
1/1/2007 6.25
2/1/2007 7
2/1/2007 4
3/1/2007 8
the chart will have three columns and in the date 2/1/2007 will display the min or max of the two values. What I need is to represent all the values i.e. the chart must have four columns , as much as the rows of the dataset
Is it possible?
View 1 Replies
View Related
Nov 5, 2007
How do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.
Currently, only the first value is showing on the report.
Thanks.
View 1 Replies
View Related
Apr 4, 2008
In the SQL SERVER 2008 Report Designer
i'm trying to configure the Axis Scale Interval with the Values of the dataset(Category Fields) and not a defined or a auto scale values, i want each graph bar have an Axis value.
In my Case i have in the Category Fields (the X Axis) day type Values and i want each graph bar with a day. I''d dropped the field date to category fields but i can't get the days all followed i only can get the days by some stupid axis auto interval.
how can i resolve this problem ?
View 1 Replies
View Related
Apr 20, 2007
I need to somehow set up a third parameter which allows me to control the tag quantity type either by ALL - % , IS NULL, or IS NOT NULL.
I tried TAG_QUANTITY LIKE :Tags but this would only work if I had the % option select and not the IS NULL or IS NOT NULL
Any thoughts on how to format the select statement?
SELECT ORGANIZATION_ID, TAG_ID, PHYSICAL_INVENTORY_ID, TAG_NUMBER, CREATION_DATE, VOID_FLAG, TAG_QUANTITY, TAG_UOM, SUBINVENTORY,
LOCATOR_ID, COUNTED_BY_EMPLOYEE_ID
FROM INV.MTL_PHYSICAL_INVENTORY_TAGS
WHERE (ORGANIZATION_ID = ite) AND (PHYSICAL_INVENTORY_ID = :InventoryID) AND (VOID_FLAG = 2) AND TAG_QUANTITY IS NULL
ORDER BY TAG_NUMBER
View 1 Replies
View Related
Sep 5, 2007
Friends, I would like to put employee name and type of leave on the y-axis and on the x-axis the date, so that users can select the date start and end and employee/employees and see the chart or leaves.
But how to do that?
My fields are: Name, LeaveDescription and Date.
The data with me is for each employee, for each date, leave codes are there.
View 4 Replies
View Related
Aug 6, 2007
Hi,
1. I have one combobox for supplierID, it displays 1,2,3...
Now i want to display the corresponing SupplierDescription in the textbox placed in the Page Header Section. If it is multiple selection then it has to be seperated by ',' (Comma).
Ex: IF i select 1,2,3 in the combobox then in the TextBox should look like
Suplliers: Ram, Don, Krish
Can you please help me in this
Thanks
Dinesh
View 5 Replies
View Related
May 30, 2007
I'd like to create a report with the folloiwng format:
DATE1 DATE2 DATE3 DATE4 DATE5 [fixed 5 dates across the top, from today to T+5]
THING1 x x x x
THING2 x x x x
THING3 x x x x
THING4 x x x x
my raw data looks like this:
THING1, DATE1, TEXT VALUE 1
THING1, DATE2, TEXT VALUE 2
&c&c.
Now: there may be 0, 1 or several (by which I mean 2-5 max) text values to display at each intersection. If there are zero I'd like it to be blank, if there are one or several, i'd like to display them in a little list within the cell.
Is this possible?
View 1 Replies
View Related
Dec 3, 2015
I would like to know how does subreport accept multi value, and how should i modify my expression so that the sub report will display correctly.
My main report will pass dynamic number of account number to sub report, it depends on how many account number a person has. I have my sub report parameter Data Type set as "Allow multiple values" and the visibility is "Visible".
Currently, I am using the following expression to try to pass multi value from main report to sub report. I had tested the result of that expression. It is showing the following result when there are 3 account numbers to pass to sub report.
1534896
1563498
1593548
With that expression, when only one account no is pass from main report to sub report, the sub report will display the result. But when more than one account numbers are passing over, the sub report display nothing, it is blank.
--expression
=Join(LookupSet(Fields!PersonNo.Value,Fields!PersonNo.Value,Fields!AccountNo.Value,
"accounts"),""
+ VBCRLF)
*Note: I cannot put the account number into a multivalue parameter in the main report and pass from that parameter to sub report. I know this will workd BUT I had tried that by setting the default value in the multivalue parameter to the dataset that consists of the account number. That involves 100 thousand plus plus account numbers and it will for sure over the limit of 8000 characters.
View 2 Replies
View Related
Feb 28, 2008
Hello,
I need to know what means are available to change the Minimum and Maximum Y-Axis scale values rather than leave them simply as they are in the properties.
Right now whatever min/max values I enter into the scale for the Y-Axis are unchangeable.
I need to be able to change the min/max scale values based on the value of the data at run time.
Any help is appreciated.
Thanks.
View 6 Replies
View Related
Jul 19, 2007
All,
I have read through the following:
http://technet.microsoft.com/en-us/library/aa964128.aspx.
The relevant section of this document is :-
Question (X-axis): How does automatic x-axis label positioning work?
Answer: Currently, built-in Reporting Services charts only allow automatic positioning in order to avoid overlapping the x-axis labels. The label direction (horizontal/vertical) of the axis labels depends on the label string sizes and the available space. X-axis labels are either shown horizontally in one line, horizontally in multiple lines with line breaks, or vertically. Showing x-axis labels at an angle, or explicit manual control over individual x-axis label positions is currently not supported.
Note There are several third-party chart add-ins that enable more control over axis labels. These add-ins can be installed on top of Reporting Services 2005.
I have exactly the problem indicated above in that some sectors of my Pie Charts I am are trying to produce are small and are close together thus labels overlap in some cases. As it says above, only automatic placing of the labels is available, but there could be a solution through third party software.
Does anyone know of a 3rd party solution/add in or a workaround?
Thanks
Msuk
View 3 Replies
View Related
Oct 14, 2009
I am creating a SSRS report using a SSAS cube as it data source. The user would like to select multiple values from a reporting parameter that is then used as a filter on the MDX statement. I am bale to have the report work successfully when only one value is selected but not when multiple values are selected; the report uses only the first value from the reporting parameter when it contains multiple values. How do I filter an MDX query using a SSRS report parameter with multiple values?
View 3 Replies
View Related
Oct 27, 2005
Is changing the display format of the Y axis of a column chart supported in the Sept CTP or is it going to be supported in the official release? For example I have built a report model with the numeric sales values set as 'C' for currency and have created a simple bar chart with year on the category axis and sales on the Y axis. The problem is that the Y axis displays as a general number (10000000) and would like to display it as a currency ($10,000,000). I can't for the life of me figure out how to display the Y axis as currency in Report Builder.
View 2 Replies
View Related
Mar 17, 2008
Hi
please excuse my ignorance but if someone could point me in the right direction i would be grateful.
i have produce a chart with some data against date points on x axis. i have another date field which i want to combine with the orignal date axis is this possible .
ie
table
results planned date Acutual date
10 02/03/07 01/03/07
46 03/03/07 03/03/07
60 06/03/07 07/03/07
i want to combine the planned date and actual date as an x axis
thanks
View 3 Replies
View Related
Aug 20, 2015
I have a bubble chart created with Report Builder 3.0. I have the Y-axis series is along the left side of the chart. When all X values are positive, everything displays normally. However, if any X-axis values are negative, the whole graph shifts slightly leftward and the Y-axis title is no longer visible. It seems to be overwritten by the shifted graph or simply pushed into nondisplay area.
Is there something I can do to make the chart stay put?
View 3 Replies
View Related
Jan 17, 2007
I'm trying to convert an old chart to Reporting Services.
We have used the same dataset for years, it is very very simple. But it seems to me that Reporting Services can't deal with this simple dataset.
My question is: How can I get create a line chart using this dataset.
The data set consists of 1 row with 96 columns (a day divided into 96 sets of 15 minutes). Each column records how many events occurs within the 15 minutes. Along the x axis I would like to display a vertical line every 4 hours. The y axis should be numbered 0 to the highest value in the results.
I could not make this dataset any more simple than it is. But Reporting Services just chokes on this.
Here is a sample of the dataset :
1 2 0 4 5 6 7 8 9 10... 96
View 1 Replies
View Related
Jun 17, 2012
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
View 5 Replies
View Related
Mar 30, 2007
I am trying to create a report using Reporting Services.
My problem right now is that the way the table is constructed, I am trying to pull 3 seperate values i.e. One is the number of Hours, One is the type of work, and the 3rd is the Grade, out of one column and place them in 3 seperate columns in the report.
I can currently get one value but how to get the information I need to be able to use in my reports.
So far what I've been working with SQL Reporting Services 2005 I love it and have made several reports, but this one has got me stumped.
Any help would be appreciated.
Thanks.
I might not have made my problem quite clear enough. My table has one column labeled value. The value in that table is linked through an ID field to another table where the ID's are broken down to one ID =Number of Hours, One ID = Grade and One ID= type of work.
What I'm trying to do is when using these ID's and seperate the value related to those ID's into 3 seperate columns in a query for using in Reporting Services to create the report
As you can see, I'm attempting to change the name of the same column 3 times to reflect the correct information and then link them all to the person, where one person might have several entries in the other fields.
As you can see I can change the names individually in queries and pull the information seperately, it's when roll them altogether is where I'm running into my problem
Thanks for the suggestions that were made, I apoligize for not making the problem clearer.
Here is a copy of what I'm attempting to accomplish. I didn't have it with me last night when posting.
--Pulls the Service Opportunity
SELECT cs.value AS "Service Opportunity"
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid = cs.attributeid
WHERE ca.name = 'Service Opportunity'
--Pulls the Number of Hours
SELECT cs.value AS 'Number of Hours'
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid =cs.attributeid
WHERE ca.name ='Num of Hours'
--Pulls the Person Grade Level
SELECT cs.value AS 'Grade'
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid =cs.attributeid
WHERE ca.name ='Grade'
--Pulls the Person Number, First and Last Name and Grade Level
SELECT s.personnumber, s.lastname, s.firstname, cs.value as "Grade"
FROM student s
INNER JOIN cperson cs ON cs.personid = s.personid
INNER JOIN cattribute ca ON ca.attributeid = cs.attributeid
WHERE cs.value =(SELECT cs.value AS 'Grade'
WHERE ca.attributeid = cs.attributeid AND ca.name='Grade')
View 11 Replies
View Related
Aug 22, 2007
Hi,
I have multiple columns in a Single Table and i want to search values in different columns. My table structure is
col1 (identity PK)
col2 (varchar(max))
col3 (varchar(max))
I have created a single FULLTEXT on col2 & col3.
suppose i want to search col2='engine' and col3='toyota' i write query as
SELECT
TBL.col2,TBL.col3
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col2,'engine') TBL1
ON
TBL.col1=TBL1.[key]
INNER JOIN
CONTAINSTABLE(TBL,col3,'toyota') TBL2
ON
TBL.col1=TBL2.[key]
Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record.
I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information.
for e.g.;
i was thinking to concatinate both fields like
col4= ABengineBA + ABBToyotaBBA
and in search i use
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result = 1 row
But it don't work in following scenario
col4= ABengineBA + ABBCorola ToyotaBBA
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result=0 Row
Any idea how i can write second query to get result?
View 1 Replies
View Related
Apr 11, 2008
I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
View 1 Replies
View Related
Jun 6, 2007
If I have a Select statement like this in my C# code:
Select * From foods Where foodgroup In (@foodgroup)
And I want @foodgroup to have these values ... "meat", "dairy", fruit", what is the correct way to add the parameter?
I tried
meat, dairy, fruit
'meat', 'dairy', 'fruit'
but neither worked. Is this possible?
View 2 Replies
View Related
Sep 1, 2007
Please be easy on me...I haven't touched SQL for a year. Why given;
Code Snippet
USE [Patients]
GO
/****** Object: Table [dbo].[Patients] Script Date: 08/31/2007 22:09:29 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Patients](
[PID] [int] IDENTITY(1,1) NOT NULL,
[ID] [varchar](50) NULL,
[FirstName] [nvarchar](50) NULL,
[LastName] [nvarchar](50) NULL,
[DOB] [datetime] NULL,
CONSTRAINT [PK_Patients] PRIMARY KEY CLUSTERED
(
[PID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
do I get
Msg 102, Level 15, State 1, Line 3
Incorrect syntax near ','.
for the following;
Code Snippet
INSERT INTO Patients
(ID, FirstName,LastName,DOB) VALUES
( '1234-12', 'Joe','Smith','3/1/1960'),
( '5432-30','Bob','Jones','3/1/1960');
Thank you,
hazz
View 3 Replies
View Related
Mar 29, 2007
Hello all,I'm trying to request a number of URLS (one for each user) from my database, then place each of these results into a separate string variables. I believed that SqlDataReader could do this for me, but I am unsure of how to accomplish this, or if I am walking down the wrong road. The current code is below (the section in question is in bold), please ignore the fact that I'm using MySQL as the commands work in the same way. public partial class main : System.Web.UI.Page{ String UserName; String userId; String HiveConnectionString; String Current_Location; ArrayList Location; public String Location1; public String Location2; public String Location3; //Int32 x = 0; private void Page_Load(object sender, EventArgs e) { if (User.Identity.IsAuthenticated) { UserName = Membership.GetUser().ToString(); userId = Membership.GetUser().ProviderUserKey.ToString(); HiveConnectionString = "Database=hive;Data Source=localhost;User Id=hive_admin;Password=West7647"; using (MySql.Data.MySqlClient.MySqlConnection conn = new MySql.Data.MySqlClient.MySqlConnection(HiveConnectionString)) { // Map Updates MySql.Data.MySqlClient.MySqlCommand Locationcmd = new MySql.Data.MySqlClient.MySqlCommand( "SELECT Location FROM tracker WHERE Location = IsOnline = '1'"); Locationcmd.Parameters.Add("?PKID", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = userId; Locationcmd.Connection = conn; conn.Open(); MySql.Data.MySqlClient.MySqlDataReader LocationReader = Locationcmd.ExecuteReader(); while (LocationReader.Read()) { Location1 = LocationReader.GetString(0); //Location2 = LocationReader.GetString(1); // This does not work.. } LocationReader.Close(); conn.Close(); // IP Display MySql.Data.MySqlClient.MySqlCommand Checkcmd = new MySql.Data.MySqlClient.MySqlCommand( "SELECT UserName FROM tracker WHERE PKID = ?PKID"); Checkcmd.Parameters.Add("?PKID", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = userId; Checkcmd.Connection = conn; conn.Open(); object UserExists = Checkcmd.ExecuteScalar(); conn.Close(); if(UserExists == null) { MySql.Data.MySqlClient.MySqlCommand Insertcmd = new MySql.Data.MySqlClient.MySqlCommand( "INSERT INTO tracker (PKID, UserName, IpAddress, IsOnline) VALUES (?PKID, ?Username, ?IpAddress, 1)"); Insertcmd.Parameters.Add("?IpAddress", MySql.Data.MySqlClient.MySqlDbType.VarChar, 15).Value = Request.UserHostAddress; Insertcmd.Parameters.Add("?Username", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = UserName; Insertcmd.Parameters.Add("?PKID", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = userId; Insertcmd.Connection = conn; conn.Open(); Insertcmd.ExecuteNonQuery(); conn.Close(); } else { MySql.Data.MySqlClient.MySqlCommand Updatecmd = new MySql.Data.MySqlClient.MySqlCommand( "UPDATE tracker SET IpAddress = ?IpAddress, IsOnline = '1' WHERE UserName = ?Username AND PKID = ?PKID"); Updatecmd.Parameters.Add("?IpAddress", MySql.Data.MySqlClient.MySqlDbType.VarChar, 15).Value = Request.UserHostAddress; Updatecmd.Parameters.Add("?Username", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = UserName; Updatecmd.Parameters.Add("?PKID", MySql.Data.MySqlClient.MySqlDbType.VarChar, 255).Value = userId; Updatecmd.Connection = conn; conn.Open(); Updatecmd.ExecuteNonQuery(); conn.Close(); } } } } Can anyone advise me on what I should be doing (even if its just a "you should be using this command) if this is not correct? In fact any pointers would be nice !Thanks everyone!
View 1 Replies
View Related
May 10, 2015
Here is some data that will explain what I want to do:
Input Data:
Part ColorCode
A100 123
A100 456
A100 789
B100 456
C100 123
C100 456
Output Data:
Part ColorCode
A100 123;456;789
B100 456
C100 123;456
View 4 Replies
View Related
Sep 20, 2007
Hi, How can I display a value of a report parameter from one report into a textbox on another report??
View 1 Replies
View Related
Jan 30, 2007
I am designing a report which will be used under the subreport control of a master report, now i am using a stored procedure for the subreport which has two parameters.
In the subreports dataset parameters tab, how can i mention the master reports columns, since i do not see the master reports columns here. since it is a different report.
If i use a hardcoded select query then i can just say
select address, city, state, zipcode from customer where (customerid = @customerID)
but i am using a stored proc. how to define the parameters under datasets parameter tab.
Thank you very much for the information.
View 2 Replies
View Related
Aug 17, 2015
I am in the process of creating a Report, and in this, i need ONLY the row groups (Parents and Child).I have a Parent group field called "Dept", and its corresponding field is MacID.I cannot create a child group or Column group (because that's not what i want).I am then inserting rows below MacID, and then i toggle the other rows to MacID and MacID to Dept.
View 3 Replies
View Related
Jul 24, 2015
I'm trying to create an email report which gives a result of multiple results from multiple databases in a table format bt I'm trying to find out if there is a simple format I can use.Here is what I've done so far but I'm having troble getting into html and also with the database column:
EXEC msdb.dbo.sp_send_dbmail
@subject
= 'Job Summary',
@profile_name =
'SQL SMTP',
[code]....
View 3 Replies
View Related
Jan 25, 2008
I have a pivot transform that pivots a batch type. After the pivot, each batch type has its own row with null values for the other batch types that were pivoted. I want to group two fields and max() the remaining batch types so that the multiple rows are displayed on one row. I tried using the aggregate transform, but since the batch type field is a string, the max() function fails in the package. Is there another transform or can I use the aggragate transform another way so that the max() will work on a string?
-- Ryan
View 7 Replies
View Related
Apr 26, 2015
I have two tables A(uname,address,full_name) and B(uname,full_name). I want to update table A for all matching case of uname in table B.
View 5 Replies
View Related
May 31, 2007
The version of Report Builder I have will only let me choose from a very limited range of layouts. For example, the tabular layout displays a single table on a page.
Is there a way to produce a report containing two tables and other fields?
For example, I would like to create a very simple customer report with customer name and address at the top, then a table containing all contacts I have for the the customer (a 1:N sub-table of customer) and then a second table containing all the orders from the customer (a 1:N sub-table of customer).
Is this possible in the current version of Report Builder or is it planned in a future relase?
P.S. I know this is easy in VS Report Designer but I specifically want to do this in Report Builder. The Report Designer client is simply too complex for my non-technical user base. Report Builder would be ideal.
View 3 Replies
View Related
Jan 18, 2002
PO table has
itemnum - over 16000 records
closedate - can be 2001, 2002
location - is 1, 2, 3 etc
Like to find itemnum where location is 1 and itemnum has closedate of 2001, if it does have close date of 2001 than check if another record of same item with closedate of 2002. If yes, than diplay that item.
The result would be itemnum which have closedate of 2001 as well as 2002. Each item may have more than one record for each year.
View 1 Replies
View Related
Jun 17, 2008
Hi.
I;m trying to sort out some values.
Ok so for sort. We have a contract and a renewal column.
A contract can have many renewals.
I'm trying to get the latest renewal for each contract (latest renewal is the one with the higher number.
so im trying this..
select distinct c.policyno,c.renewalno
from CONTRACT AS c inner join multicontract as d ON c.multicontractID = d.ID
where
c.renewalno in (select max(crn.renewalno) from contract crn
where
c.id= crn.id
But i keep getting multiple results (p.e. contra 12 ,renewal 13,14,15 and i want contract 12, renewal 15)
Any help?
View 16 Replies
View Related
