I have SSRS 2000, and am trying to render a report in Excel. My report has a table, and in the properties section of the table I have the PageBreakAtEnd set to True. When I run the report and export to Excel, I get one long report, and no different sheets as expected. If I export to PDF I don't get the page breaks after the table as expected. What have I done wrong?
Thanks in advance!
I have several nested sub-total groups that are all coded to "page break at end". I don't know how to tell RS to suppress the page break if one sub-total immediately follows another. The initial HTML output seems to be smart enough to do this suppression on its own, but when I export to PDF, all the page breaks appear. This causes several pages at the end of the report with one line per page. Perhaps, if I could explicitly suppress these page breaks, the PDF would render properly. How can I do this?
View 1 Replies View RelatedFit an intere table in same page without page break for save the excel export.
My table has a Group for order my dates.
I need to have the intere table in the same page, i don't care about blank space at the end of the page.
I can't use the page break beacuse i need an excel export in a unique sheet..
I have tested.. every page break..you'll have a different sheet in your excel export
I need something like this
page 1
Zone
1
2
3
4
5
6
7
7
8
9
..
page 2
Zone
1
2
3
4
5
6
7
7
8
9
..
but an unique sheet in the excel export
Is there any way to force a matrix or table to display on only one page regardless of how much data there is?
I've tried checking fit this matrix on one page if possible, but apparently it isn't possible for some reason.
Hi,
I want to get this straight, and so far it's not really working the way I want. So, here it is.
I got a table with multiple groups (3 grouping, Manager, Sale Type and Product Type). I want the Manager name being shown on every new page (which I enabled using the "Repeat on new page" property). This works fine so far. Then, I want that every time I have a new "Sale Type", it's on a new page.
This is where it gets hard. I can't get it to work the way I want.
If I set the group 2 with a "Page Break At Start", the first page of my report is blank (which is kind of logical looking at the property name). Same thing goes with "Page Break At End", but the last page is blank.
Is there any way to just have a table grouped without any blank page? Can I dynamicaly disable page breaks if it is the last page / first page of the report?
Here's what I want:
Manager: Some guy
Sale Type - Normal
Product - Mitsubishi Lancer
[some report detail goes here ...]
Page 1/2
** PAGE BREAK **
Manager: Some guy
Sale Type - Rent
Product - Honda Civic
[some report detail goes here ...]
Page 2/2
I have a report with multiple data regions. Each region has its own dataset potentially. I want each region to appear on its own page. Sometime I get a page break where I want it and in other instances within the same report, the breaks are ignored and 2 regions will appear on the same page. I tried imbedding the data regions in rectangles and setting the page break on the rectangle but this doesn't seem to help. There doesn't seem to be any predictable pattern. Any ideas?
View 6 Replies View RelatedGreetings all:
I'm having a bit of an issue with a report that I've been working on for the last several days. The report is set up to use a table to print out information grouped by customer, with each customer's information showing up on a new page. This is all fine and well, but it seems that the table is generating page breaks after each row; in other words, since the table has twelve rows (10 group header rows, one details row, and one group footer row), twelve pages get printed, with the data from each row showing up at the top of the page, and nothing else.
The odd thing seems to be this: when I turn off page breaks (initally set to occur at the end of each group), it continues to
insert these breaks, as long as the details row forces the group footer onto another page. This doesn't happen every time the report is generated. Short of getting into the XML that makes up the report definition, I've tried every trick I can think of to get this to stop.
Any suggestions?
Edit: I should also mention that the report previews just fine, but only spits out the 12+ pages when printed or exported.
I have a sales report which is grouped by customer with a total for each customer and then a new page afterwards for the next customer - this works great however I am trying to put a grand total on (all customers) - this is appearing on a seperate page!!! - on crystal I used to put this field in the summary section, so it would appear on the bottom of the last page, has anyone got any ideas??????
View 2 Replies View RelatedHello All,
I face the following problem.
I have a report with a list and under that list i have a table and a chart that sums the values from the dataset.
In my list properties i have set that their should be a page break after the list (meaning that my table and chart
should start a new page).
In my listgroup properties is hava also set a page break after each group.
Now when i preview my report in visual studio, the groupdetails are displayed in one page and the summed table and chart are on a second page. when i do a print preview, i get 3 pages but my sum table is on the second page under the last groupdetail and the chart is 3rth page.
When i publish my report on the reportserver and i do the same through my browser, i get the same error.
Why doesn"t the page break after each group doesn't work ?
Why does the page break after the list doesn't work ? is this a bug ?
Is there a way to set a pagebreak manually on the report for example in a hidden textbox ???
Any suggestions, tricks, help .....
Vinnie
hi,
can any one tell how to force a page break for rdl files dynamically.I mean the page break should appear at constant height in every page,if we include the page break at group level or table level then scrolling appers in webpage.so can we force a page break based on report page height so that if records are present or not page break should be down it should not shrink to top.
thanks
Hi,
I have found "as have many others" that when adding dynamic visibility " tosub_reports and tables etc" to SSRS reports then pagebreaks are switched off. Has anyone found a workaround for this? Or am I doing something wrong
My report has one page per record grouped on an id. Each record has possible additonal information in another table which if present I would like to show on a new page. I can get this to work ok by just appending a subreport to the report based on the value of a report parameter, however this does not meet the requirement. I need to have the subreport on a new page for each record.
Any comments welcome.
I am having an issue with page breaks on tables.
I have 2 tables that I have set to PageBreakOnStart. They have conditional visibility. What I am seeing is that if i put an item in ToggleItem, the page break functionality does not work anymore.
Is this by design? I would have expected the page break to be there if the item is visible, and not if it is hidden.
Any ideas?
Thanks!
BobP
Hi,
I am having trouble setting conditional page breaks to my reports.
i.e... I am having a report where I need to allow user the option to set page break between a group or not.
Based upon the option selected by the user, I need to add page break to the report. I tried with all possibilities inside Sort and Group dialog box, but could not figure out how to toggle the option at runtime.
Does anyone know how to implement page breaks on runtime? Help me plzzzz!! I really need this to be done€¦Thanx in advance for any help..
- Rayz
Hi,
I'm using Rpt Svc in SQL 2000. I have a report that uses a table data region. Is there a way to control placement of vertical page breaks? As in when the page is just too wide to print on a single sheet of paper.
Thanks.
I searched the forum, but I was unable to find an answer to this. What I want to do is remove the page breaks (horizontal lines) from the web archive, but I've been unable to find anything on the internet about it.
Does anyone have any advice/suggestions? Thanks in advance.
Hello-
I am new to reporting services and had a couple questions regarding the formatting of my reports.
First-
I have a matrix report that needs to be sorted in both ascending and descending order by Total Buys for each Title. I have inserted a subtotal for Buys in the report Layout but I cannot get the report to sort by this Total, only by the name of the Title. Is there an advanced sorting option I am missing?
Second-
My matrix reports generate on hundreds of pages and I would like them to generate on as few pages as possible to make viewing the reports easier. I have made sure to turn off page breaks in every category but this does not seem to have any effect. How else should I go about eliminating these page breaks?
Any help would be greatly appreciated, thanks in advance.
-Eric
Hello -
Does anybody know of a way to force SSRS to render a report with no page breaks at all? And better yet, to render as such but export using breaks (I know, thats asking a lot but the first part seems to be a reasonable request)
I have 1 report that renders a lot of data with no page breaks and cannot find a SINGLE property difference from the reports that do break...
Thanks in advace,
Gary
When viewing reports in Report Manager, I can't keep a consistent view. Some reports are on several pages, requiring the move to the next page, and some just appear as one long report to scroll down through. I cannot find any difference in the reports to indicate what causes that. I had posted this question before, and thought I had found the answer (moving info out of the table header and putting it in a group header) that only worked on one occasion and I still have inconsistent reports. Does anyone have an idea why this is happening?
I don't have page breaks set on any groups in these reports, at least none that I am aware of. I have checked one against the other to see if I can find any difference, but nothing as yet.
Any help would be greatly appreciated!
Are groups within a list or table forced to be kept on the same page (if possible)? If so, is there any way around this?
My problem is a report with a list with 3 tables inside the list. All tables show details associated with the grouped individual. The size of one list item can be slightly smaller than half a page or over. When the report can not fit two list items on one page, it starts a new page and leaves unwanted white space.
I have tried:
adding a rectangle
adjusting width, margins, etc.
not using lists, only tables nested within tables
to check for page breaks, I adjusted the page size to 8.5 X 20. Same thing occurs, as many lists as possible on one page without splitting between pages.Thanks for any guidance.
I have a report with 5-6 tables showing different summary information. These are set up to all go one after another and there are no page breaks. The only instance I would like a page break is if a table content is getting split cross pages. Is there a way for me to specify that a table will be on a new page if it is broken accross multiple pages?
(This is due to Row growth, not column growth)
(KeepTogether is set to true)
Any help is greatly appreciated.
I have set the Interactive Height in my SQL report to 11 inches. I have also set a page break to occur after each table group in my report. When I run the report in SQL Reporting Services (or in Visual Studio 2005) the only page breaks that occur are the ones after each group. The Interactive Height setting is not causing page breaks. The first group in my report prints out as 4 pages but is showing up on the html screen as 1 long page. The first page break finally occurs at the end of the first group.
How can I get the Interactive Height to force page breaks within each of my groups? I am using SQL Reporting Services 2005.
I have a report with a single table, single grouping level, single data set and no sub-reports. It has 3 rows for a grouping header and 3 rows per dataset row of detail. The detail rows are initially hidden and can be expanded by clicking on the header +. Its a fairly standard master-detail report.
Regardless of data size, I get NO page breaks in HTML. I have the Interactive size set to 8.5x11, KeepTogether is set to False, and PageBreakAtEnd is set to False. I would like it to break based on the visible grouping rows.
As it is now, everytime you expand any section, it takes forever to reload for a larger recordset.
I know that "HTML renderer and Preview (which are soft page break renderers) will ignore page breaks of conditionally hidden items and their children.", but how do I get this report to page break?? I've seen a lot of posts on this, but none that seem to have an answer.
Think I have found a bug.
I have a report that has a Parameter called "LevelOfDetail" This has 2 possible values "Summary, Detail, or Combined".
The report has a Summary Section and a subreport that holds the details.
WIthin the summary section is a Matrix (a list of all properties and some values)
If they choose to see the details, the matrix in the details section will show a break out of all this information summarized in the summary section.
The Details Matrix is set to have a page break at the beginning and end of the top level group.
I have a list control on the summary page that contains the details subreport and passes the appropriate parameter.
Everything works the way I want until I try to set visibility on sub report.
Once I set the conditional visibility of the report objects (based on the Level of Detail parameter) the page breaks are not recognized.
This is important as the user will never print the report, but will be downloading to Excel.
If the page breaks work correctly, each page is assigned a different worksheet in their downloaded workbook.
Any help, please let me know.
I'm having an odd problem that I've never experienced before. I have a couple of tables and then a bunch of text fields. Each table needs to start on a new page, as does the collection of textboxes. I can accomplish this for the two tables but not for the text boxes. When I set pagebreadatend to true for the second table, the textboxes come right after it as if it were set to false. I even embedded a rectangle in btween the table and the textboxes and set its pagebreakatend to true, but this also did not have the expected effect. What is going on here? There's nothing funky about this report, no subreports, no conditional visibility, etc.. Thanks for any help!
View 1 Replies View RelatedHi all...I have a stored proc that works fine except I can't get thepaging property to work in ASP. It seems that because I'm building theSQL withing the SP is causing the problem. If I don't build the SQL asa string paging works. In my ASP page, the pagecount property returns-1 for some reason.Here's the proc:SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOALTER Procedure LS_DisplayAllCategoriesBoolean@aSections varchar(255),@field varchar(255)Asdeclare @sql varchar(1000)SET NOCOUNT ONset @sql = 'SELECT DISTINCT ls_product_catalog.id,ls_product_catalog.ItemNumber, ls_product_catalog.Name,ls_product_catalog.[Descriptor], ls_product_catalog.Price,ls_product_catalog.Shade_Name, ls_product_catalog.Sale_Price,ls_product_catalog.Sale_DescFROM dbo.ls_brand INNER JOINdbo.ls_product_catalog ON dbo.ls_brand.nID =dbo.ls_product_catalog.CategoryID INNER JOINdbo.ls_product_category ON dbo.ls_product_catalog.id =dbo.ls_product_category.nProductIDWHERE dbo.ls_brand.bVisible = 1 anddbo.ls_product_category.nCategoryID in (Select IntValuefrom dbo.CsvToInt(''' + @aSections + ''') ) 'if @field = 'bNew'beginset @sql = @sql + ' AND bNew = 1 AND(dbo.ls_product_catalog.bGiftOnly is null ordbo.ls_product_catalog.bGiftOnly = 0)'set @sql = @sql + ' order byls_product_catalog.[Descriptor]'endif @field = 'bGift'beginset @sql = @sql + ' AND bGift = 1 or bGiftOnly =1'set @sql = @sql + ' order byls_product_catalog.[Descriptor]'endif @field = 'bGiftOnly'beginset @sql = @sql + ' AND bGiftOnly= 1'set @sql = @sql + ' order byls_product_catalog.[Descriptor]'endif @field = 'sale_price'beginset @sql = @sql + ' AND (sale_price is not null ORsale_desc is notnull)'set @sql = @sql + ' order by ls_product_catalog.Name'endexec(@sql)GOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ON
View 1 Replies View RelatedHi
When i use my insert-exec in my proc, say it Y, and the inner proc is X (don't contain an other insert-exec). when i call the Y proc in sql query analyzer the call is executed and it get me back results.
But when I call the Y proc from an ASP page, the execution is aborted, and I don’t know why, I have tested many thinks but it doesn’t work (for exp: the use commit transaction, set ....).
Please could you tell me if i miss some things i should add to my procs for the IIS web server could have right to execute my Y proc
Configuration of my application
- IIS Web server 6.0
- Sql Server 2000 SP 2.0
- TSQL as a sql language (of course)
- ASP as web porgramming language
- The call of the insert exec proc is as following:
o INSERT INTO #TMP_F_B (
o Field1 ,
o Field2,
o Field3 ,
o …,
o )
o EXEC dbo.ps_a5s_rpt_charge700 @util, @annee , @perimetre , @secteur , @poste , @fournisseur , @err , @lib_err
Many thanks
Sincerly
Hi,
I'm trying to get a data value to appear in the report footer on each page of my report. Using the technique described in various text books etc. I have placed a hidden text box in the report body, and the footer references this text box value.
The report is 4 pages long when I print preview it. The hidden field was initially placed near the top of the report body, so it is there on page 1 in print preview and the footer works on page 1. Pages 2,3,4 (where the hidden field ain't) just gets #Error in the footer.
If I simply move the hidden field further down in the report body so that now its on page 2 in print preview, then guess what - the footer now works on page 2 but errors everywhere else!
Why are ReportItems not known across the whole report? This is maddening. Does anyone know how to make a simple hidden text box value, that is referenced by the page footer, work so that every instance of the page footer shows the correct value?
thankyou
rob
Hi,
i am working on SSRS 2005. i have one problem while accessing report throgh ASP.net pages.
i have used multivalue parameters in the report. on the report server it works fine but on the .asp page when that report is accessed, drop down is not working,
can anybody guide me regarding this , what to do?
thanks and Regards,
Vishruti.
Hi All
i have created one report using SSRS 2005, in this report one parameter is multivalue parameter, this report preview working fine and user able to select multivalues. but the problem is i deployed this report in server and opened in client system (reports shown to user using report viewer in aspx pages), i am able to access the report but multivalue parameter dropdown is not working.
when i clicked on multivalue parameter dropdown report refreshing and remaining parameters default vaues coming up..
i am unable to find the solution
please anyone help me
thanks
I have designed a report in which there are 6-7 charts. I want to print each chart in a new page. For this I have inserted page break after each chart. After this the report is populating fine but when I am exporting the report in pdf the page break are not working.
View 4 Replies View Related
I've never attempted to use the "Repeat Report Item with Data Region on Every Page " feature before. I'm trying to use it on text boxes with the data region being a matrix. I have a report that is two pages, and the text boxes are only appearing on the first page. Also, the matrix is appearing with zero space between it and the header. Any ideas?
Lindsay
Hi,
I have a report which has 3 tables kept inside rectangle.I have PageBreakAtBegin Set to True for the last 2 tables.Hide Property for rectangle is False.Everything is working fine.
Moment,I place condition in Hide Property,no matter it's True or False,page break stops wroking.I can see all the tables in the single Excel file or report
Any help will be appriciated
-Thanks,
Digs
I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
View 3 Replies View Related