Hi,
I'm using Rpt Svc in SQL 2000. I have a report that uses a table data region. Is there a way to control placement of vertical page breaks? As in when the page is just too wide to print on a single sheet of paper.
Thanks.
I have several nested sub-total groups that are all coded to "page break at end". I don't know how to tell RS to suppress the page break if one sub-total immediately follows another. The initial HTML output seems to be smart enough to do this suppression on its own, but when I export to PDF, all the page breaks appear. This causes several pages at the end of the report with one line per page. Perhaps, if I could explicitly suppress these page breaks, the PDF would render properly. How can I do this?
View 1 Replies View RelatedFit an intere table in same page without page break for save the excel export.
My table has a Group for order my dates.
I need to have the intere table in the same page, i don't care about blank space at the end of the page.
I can't use the page break beacuse i need an excel export in a unique sheet..
I have tested.. every page break..you'll have a different sheet in your excel export
I need something like this
page 1
Zone
1
2
3
4
5
6
7
7
8
9
..
page 2
Zone
1
2
3
4
5
6
7
7
8
9
..
but an unique sheet in the excel export
Is there any way to force a matrix or table to display on only one page regardless of how much data there is?
I've tried checking fit this matrix on one page if possible, but apparently it isn't possible for some reason.
Hi,
I want to get this straight, and so far it's not really working the way I want. So, here it is.
I got a table with multiple groups (3 grouping, Manager, Sale Type and Product Type). I want the Manager name being shown on every new page (which I enabled using the "Repeat on new page" property). This works fine so far. Then, I want that every time I have a new "Sale Type", it's on a new page.
This is where it gets hard. I can't get it to work the way I want.
If I set the group 2 with a "Page Break At Start", the first page of my report is blank (which is kind of logical looking at the property name). Same thing goes with "Page Break At End", but the last page is blank.
Is there any way to just have a table grouped without any blank page? Can I dynamicaly disable page breaks if it is the last page / first page of the report?
Here's what I want:
Manager: Some guy
Sale Type - Normal
Product - Mitsubishi Lancer
[some report detail goes here ...]
Page 1/2
** PAGE BREAK **
Manager: Some guy
Sale Type - Rent
Product - Honda Civic
[some report detail goes here ...]
Page 2/2
I have a report with multiple data regions. Each region has its own dataset potentially. I want each region to appear on its own page. Sometime I get a page break where I want it and in other instances within the same report, the breaks are ignored and 2 regions will appear on the same page. I tried imbedding the data regions in rectangles and setting the page break on the rectangle but this doesn't seem to help. There doesn't seem to be any predictable pattern. Any ideas?
View 6 Replies View RelatedGreetings all:
I'm having a bit of an issue with a report that I've been working on for the last several days. The report is set up to use a table to print out information grouped by customer, with each customer's information showing up on a new page. This is all fine and well, but it seems that the table is generating page breaks after each row; in other words, since the table has twelve rows (10 group header rows, one details row, and one group footer row), twelve pages get printed, with the data from each row showing up at the top of the page, and nothing else.
The odd thing seems to be this: when I turn off page breaks (initally set to occur at the end of each group), it continues to
insert these breaks, as long as the details row forces the group footer onto another page. This doesn't happen every time the report is generated. Short of getting into the XML that makes up the report definition, I've tried every trick I can think of to get this to stop.
Any suggestions?
Edit: I should also mention that the report previews just fine, but only spits out the 12+ pages when printed or exported.
I have a sales report which is grouped by customer with a total for each customer and then a new page afterwards for the next customer - this works great however I am trying to put a grand total on (all customers) - this is appearing on a seperate page!!! - on crystal I used to put this field in the summary section, so it would appear on the bottom of the last page, has anyone got any ideas??????
View 2 Replies View RelatedI have SSRS 2000, and am trying to render a report in Excel. My report has a table, and in the properties section of the table I have the PageBreakAtEnd set to True. When I run the report and export to Excel, I get one long report, and no different sheets as expected. If I export to PDF I don't get the page breaks after the table as expected. What have I done wrong?
Thanks in advance!
Hello All,
I face the following problem.
I have a report with a list and under that list i have a table and a chart that sums the values from the dataset.
In my list properties i have set that their should be a page break after the list (meaning that my table and chart
should start a new page).
In my listgroup properties is hava also set a page break after each group.
Now when i preview my report in visual studio, the groupdetails are displayed in one page and the summed table and chart are on a second page. when i do a print preview, i get 3 pages but my sum table is on the second page under the last groupdetail and the chart is 3rth page.
When i publish my report on the reportserver and i do the same through my browser, i get the same error.
Why doesn"t the page break after each group doesn't work ?
Why does the page break after the list doesn't work ? is this a bug ?
Is there a way to set a pagebreak manually on the report for example in a hidden textbox ???
Any suggestions, tricks, help .....
Vinnie
hi,
can any one tell how to force a page break for rdl files dynamically.I mean the page break should appear at constant height in every page,if we include the page break at group level or table level then scrolling appers in webpage.so can we force a page break based on report page height so that if records are present or not page break should be down it should not shrink to top.
thanks
Hi,
I have found "as have many others" that when adding dynamic visibility " tosub_reports and tables etc" to SSRS reports then pagebreaks are switched off. Has anyone found a workaround for this? Or am I doing something wrong
My report has one page per record grouped on an id. Each record has possible additonal information in another table which if present I would like to show on a new page. I can get this to work ok by just appending a subreport to the report based on the value of a report parameter, however this does not meet the requirement. I need to have the subreport on a new page for each record.
Any comments welcome.
I am having an issue with page breaks on tables.
I have 2 tables that I have set to PageBreakOnStart. They have conditional visibility. What I am seeing is that if i put an item in ToggleItem, the page break functionality does not work anymore.
Is this by design? I would have expected the page break to be there if the item is visible, and not if it is hidden.
Any ideas?
Thanks!
BobP
Hi,
I am having trouble setting conditional page breaks to my reports.
i.e... I am having a report where I need to allow user the option to set page break between a group or not.
Based upon the option selected by the user, I need to add page break to the report. I tried with all possibilities inside Sort and Group dialog box, but could not figure out how to toggle the option at runtime.
Does anyone know how to implement page breaks on runtime? Help me plzzzz!! I really need this to be done€¦Thanx in advance for any help..
- Rayz
I searched the forum, but I was unable to find an answer to this. What I want to do is remove the page breaks (horizontal lines) from the web archive, but I've been unable to find anything on the internet about it.
Does anyone have any advice/suggestions? Thanks in advance.
Hello-
I am new to reporting services and had a couple questions regarding the formatting of my reports.
First-
I have a matrix report that needs to be sorted in both ascending and descending order by Total Buys for each Title. I have inserted a subtotal for Buys in the report Layout but I cannot get the report to sort by this Total, only by the name of the Title. Is there an advanced sorting option I am missing?
Second-
My matrix reports generate on hundreds of pages and I would like them to generate on as few pages as possible to make viewing the reports easier. I have made sure to turn off page breaks in every category but this does not seem to have any effect. How else should I go about eliminating these page breaks?
Any help would be greatly appreciated, thanks in advance.
-Eric
Hello -
Does anybody know of a way to force SSRS to render a report with no page breaks at all? And better yet, to render as such but export using breaks (I know, thats asking a lot but the first part seems to be a reasonable request)
I have 1 report that renders a lot of data with no page breaks and cannot find a SINGLE property difference from the reports that do break...
Thanks in advace,
Gary
When viewing reports in Report Manager, I can't keep a consistent view. Some reports are on several pages, requiring the move to the next page, and some just appear as one long report to scroll down through. I cannot find any difference in the reports to indicate what causes that. I had posted this question before, and thought I had found the answer (moving info out of the table header and putting it in a group header) that only worked on one occasion and I still have inconsistent reports. Does anyone have an idea why this is happening?
I don't have page breaks set on any groups in these reports, at least none that I am aware of. I have checked one against the other to see if I can find any difference, but nothing as yet.
Any help would be greatly appreciated!
Are groups within a list or table forced to be kept on the same page (if possible)? If so, is there any way around this?
My problem is a report with a list with 3 tables inside the list. All tables show details associated with the grouped individual. The size of one list item can be slightly smaller than half a page or over. When the report can not fit two list items on one page, it starts a new page and leaves unwanted white space.
I have tried:
adding a rectangle
adjusting width, margins, etc.
not using lists, only tables nested within tables
to check for page breaks, I adjusted the page size to 8.5 X 20. Same thing occurs, as many lists as possible on one page without splitting between pages.Thanks for any guidance.
I have a report with 5-6 tables showing different summary information. These are set up to all go one after another and there are no page breaks. The only instance I would like a page break is if a table content is getting split cross pages. Is there a way for me to specify that a table will be on a new page if it is broken accross multiple pages?
(This is due to Row growth, not column growth)
(KeepTogether is set to true)
Any help is greatly appreciated.
I have set the Interactive Height in my SQL report to 11 inches. I have also set a page break to occur after each table group in my report. When I run the report in SQL Reporting Services (or in Visual Studio 2005) the only page breaks that occur are the ones after each group. The Interactive Height setting is not causing page breaks. The first group in my report prints out as 4 pages but is showing up on the html screen as 1 long page. The first page break finally occurs at the end of the first group.
How can I get the Interactive Height to force page breaks within each of my groups? I am using SQL Reporting Services 2005.
I have a report with a single table, single grouping level, single data set and no sub-reports. It has 3 rows for a grouping header and 3 rows per dataset row of detail. The detail rows are initially hidden and can be expanded by clicking on the header +. Its a fairly standard master-detail report.
Regardless of data size, I get NO page breaks in HTML. I have the Interactive size set to 8.5x11, KeepTogether is set to False, and PageBreakAtEnd is set to False. I would like it to break based on the visible grouping rows.
As it is now, everytime you expand any section, it takes forever to reload for a larger recordset.
I know that "HTML renderer and Preview (which are soft page break renderers) will ignore page breaks of conditionally hidden items and their children.", but how do I get this report to page break?? I've seen a lot of posts on this, but none that seem to have an answer.
Think I have found a bug.
I have a report that has a Parameter called "LevelOfDetail" This has 2 possible values "Summary, Detail, or Combined".
The report has a Summary Section and a subreport that holds the details.
WIthin the summary section is a Matrix (a list of all properties and some values)
If they choose to see the details, the matrix in the details section will show a break out of all this information summarized in the summary section.
The Details Matrix is set to have a page break at the beginning and end of the top level group.
I have a list control on the summary page that contains the details subreport and passes the appropriate parameter.
Everything works the way I want until I try to set visibility on sub report.
Once I set the conditional visibility of the report objects (based on the Level of Detail parameter) the page breaks are not recognized.
This is important as the user will never print the report, but will be downloading to Excel.
If the page breaks work correctly, each page is assigned a different worksheet in their downloaded workbook.
Any help, please let me know.
Hi, I wanted to know that can we access a webpagefrom a store procedure in sql server 2000 like we run a exe file from sql server. Bye.
View 1 Replies View RelatedI have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
View 3 Replies View RelatedI can't get my asp page creatd in Front Page 2000 to dump info into SQL database...am I missing something?
View 1 Replies View RelatedWhat is the default page size in sql server 2000....?
View 1 Replies View RelatedHi
I am upgrading a SQL 6.5 database with code page 850 to SQL 2000 with code page 1252.
The problem we have is any german "u" ( with the umlatt - two dots ) above it wont transfer.
I am using the SQL upgrade tool that comes with sql 2000 and have tried many different code pages in 2000 but no joy.
Can anyone help?
Thanks
J.
We are running SQL Server 2000 Enterprise Edition on a 2-node cluster with IIS/ASP.NET front-end hosting 150-200 active connections. There is a SVCHOST process running under LOCAL SERVICE account - hosting the Remote Registry process that is using only 4,200K but is page faulting 200-500 times per second. I realize this process is used for failover, but the page fault seems excessive. Any thoughts on this?
The servers are running Windows Server 2003 with 4 processors and 4gb RAM.
Hi -- I have a different problem than most people with a Reporting Services 2000 report rendering to Excel 2003.
My report has 5 different subreports. I want them to appear in Excel as 5 separate tabs. When rendered through the browser (using Report Manager), the page breaks are correct -- there are 5 pages.
When exported to Excel, the first report is on a separate tab, and the other 4 are jammed together on one tab.
Each report consists of between 1 and 4 tables. The last table on each report has the "page break after this table" checked.
The same report deployed to SSRS 2005 page breaks the way I expect in Excel. In SSRS 2000, it doesn't.
Any ideas? Report/body page widths/heights?
Cheers,
David
hi friends, i need a code for storing and receiving an image to/fro SQL SERVER 2000 (in C#). i had searched some sites, all are in VB for windows forms not for website. finally i got a code from some site. it is working for storing purpose. not working for receiving purpose. the code for receiving and displaying purpose is (in a fresh page) private void Page_Load(object sender, System.EventArgs e){ // Put user code to initialize the page here MemoryStream stream = new MemoryStream (); SqlConnection connection = new SqlConnection (@"server=INDIAINDIA;database=iSense;uid=sa;pwd=india"); try { connection.Open (); SqlCommand command = new SqlCommand ("select Picture from Image", connection); byte[] image = (byte[]) command.ExecuteScalar (); stream.Write (image, 0, image.Length); Bitmap bitmap = new Bitmap (stream); Response.ContentType = "image/gif"; bitmap.Save (Response.OutputStream, ImageFormat.Gif); } finally { connection.Close (); stream.Close (); }}what s the problem is.........i'm getting an exception at Bitmap instantiation.(i.e Bitmap bitmap = new Bitmap (stream);)exception is "Parameter is not valid" what is the problem with that coding? was it correct? do u have any code for this in C#? if so, pls provide that......help me........pls.............
View 2 Replies View RelatedHi folks,
I'm having trouble getting off the ground with the Web application walkthrough "Walkthrough: Creating a Web Application Using Visual C# or Visual Basic" in VS.NET Pro 2002 [Academic] documentation. After a bit of fishing around, and consulting the MS Knowledge Base, I got the pubs database installed. I also got the connection to work well enough that the dataset would fill in the IDE.
The problem is that when I try to run the web form, either from the IDE debug menu, or by accessing the .aspx file on localhost using Firefox, I get the error:
SELECT permission denied on object 'titles', database 'pubs', owner 'dbo'.
showing in the browser.
My understanding is that this page is running as ASPNET, and I did already carry out the recommended commands to enable access:
C:>osql -E -S MY-MACHINE-NAMEVSDOTNET -Q "sp_grantlogin 'MY-MACHINE-NAMEASPNET'"
C:>osql -E -S MY-MACHINE-NAMEVSDOTNET -d Pubs -Q "sp_grantdbaccess 'MY-MACHINE-NAMEASPNET'"
both of which commands returned successfully. Any suggestions as to what else I should do to get the necessary permissions to actually display the data in my browser? Does the IIS user account need permission also?
Thanks for any insight into this vexing problem. I must say that along the way, I have had some fun exploring the osql comand-line tool. Using the -E switch, I have been able to run select and upgrade queries, but this is all pretty much fishing in the dark. I would like to get back to actually working with the walthroughs in the Visual Studio documentation.
Thanks,
Joseph
I have a Sales report with 3 lists each being nested inside of the other and they also each contain a Matrix. Top list is for Region, followed by District and then State. I have page breaks setup so that each region appears on it's own page, followed by each District summary appearing at the top of the page with a breakdown on that page for that Districts states. In total the report exported to PDF or printed runs around 19 pages. This report when exported to PDF or printed works fine.
When I export it to excel I get a full document map on the first worksheet. I then get 10 worksheets of information breaking off the last 9. The document map links reflect the absence of this data by not actually being links from that point on. If I remove page breaks so that the number of pages created are less than 10 excel worksheets the export works fine and my document map links are created.
So does the export to Excel have a limitation on the number of Worksheets that can be created? In my case it appears to happen at 10 each time. Oh and by the way I've attempted this in VS.2003 and 2005 and SQL Reporting Services 2000 and 2005 for the same reports.
Thanks for your assistance.