I am receiving the "Provider Load Failure" message when I start the SSRS Configuration Tool on my report server.
As suggested on other threads, I have checked the reportingserviceswmi.dll and it is version 2005.90.1399.0 and the WMI service is running.
Any suggestions on what to do next?
I'm trying to do the above using the Reporting Services Configuration Manager and I can't even connect. I get the error Provider Load Failure.
Anyone got any pointers?
Hi,
I am having problem in connecting to the report server in SQL Server Management Studio. An msg said "Provider load failure" is displayed but i could deploy reports in Visual Studio and view them in IE browser by going to http://localhost/Reports.
Any ideas?
Thanks,
Jane
Hi
I have installed SQl server 2005 reporting services on my machine.When I try to connect report server it gives me error "Provider load failure". Becuase of this I am not able to deploy any report.When I go to the Reporting Service Configuration,it gives me the same error.
FYI: The WMI service is started
Any help would be greatly appreciated.
Thanks
Hi ,
I am struck with one issue.Plz help me out if you have any solution for this one.
Details
Front End - Visual Studio 2005
Back End -SQL Server 2000 (Remote database)
Error i am getting is
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at dbcAccess.clsSQL.GetConnect() in C:Documents and SettingskerlsgMy DocumentsVisual Studio 2005ProjectsdbcAccessdbcAccessclsSQL.cs:line 296}
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 3 Replies View RelatedHello All,
I'm using SQL Sever 2005 express and accessing it with asp.
Here is my script of connecting database:
strServerName=".\sqlexpress"
strUid="test"
strPwd="test@123"
strDatabaseName="test"
Set Conn = Server.CreateObject("ADODB.Connection")
Conn.CursorLocation = 3
Conn.ConnectionString = "driver={sql native client};server=" & strServerName & ";uid=" & strUid & ";pwd=" & strPwd & ";database=" & strDatabaseName & ";Encrypt=NO"
Conn.ConnectionTimeout = 30
Conn.Open
However, everytime I connect I get the following error in my IE:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][SQL Native Client]Client unable to establish connection due to prelogin failure
/inc/OpenCnn.asp, line 15 (whch is Conn.open)
When I check the SQL server express log file, I find this one:
2006-07-16 20:20:07.53 Logon The server was unable to load the SSL provider library needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books Online for information on this error message: 0x6d. [CLIENT: <local machine>]
My sql native client configuration is: Force Protocol Encryption: No, Trust Server Certificate: yes.
What's possibly wrong with my script or sql server configuration?
Thanks in advance
Oracle recently released Oracle Data Provider for .NET (ODP .NET) 10.2.0.2.20. It happened on August 1, 2006. Oracle claims that its software is compliant with Microsoft ADO.NET 2.0 and €œ€¦more flexible, faster, and more stable€¦.€?. On top of it Oracle introduced many new features €œ€¦ not available from other .NET drivers€¦€?.
http://www.oracle.com/technology/tech/windows/odpnet/index.html
I decided to give it a shot and try in SSIS.
I installed ODP.NET on my machine and it works just fine in PL/SQL Developer
Next, I opened Data Source Wizard in BIDS for SSIS project.
I see Oracle Data Provider for .NET option is enlisted under .NET Providers node on a tree. But when I select it, I am getting an error dialog:
Failed to find or load the registered .Net Framework Data Provider.
So what could be done in such scenario?
Regards,
Yitzhak
I have numerous jobs that use the Bulk Load object to transfer data. Once or twice a day, one of the jobs will fail with the folowing error:
Error: 0xC0202009 at Data Flow Task, SQL Server Destination [73]: An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Could not bulk load because SSIS file mapping object 'GlobalDTSQLIMPORT ' could not be opened. Operating system error code 8(Not enough storage is available to process this command.). Make sure you are accessing a local server via Windows security.".
Error: 0xC0202071 at Data Flow Task, SQL Server Destination [73]: Unable to prepare the SSIS bulk insert for data insertion.
After receiving this error, any job that uses the bulk load object that attempts to run will fail with the same error. After restarting the SQL Server service, all jobs will run ok.
I can find virtually nothing on this particular error so if you have seen it before please let me know. This has become a maintenance nightmare!
I get the error:
Package Load Failure
Package 'Microsoft.SqlServer.Tools.PublishWizard.VSCommands.MenuCommandsPackage, MenuAndCommands, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bg3856ad364e35' has failed to load properly ( GUID = {A38CF415-6AD2-45F6-8132-9CC33EBE0629}).
I get this error after I have opened VS and then open the Server Explorer Window.
I have been using VS2005 Professional since December of 2005 and have never encountered this before. I have never had a beta version of anything on this PC. I have been searching the Net but haven't found a solution. At this point, I haven't tried reloading VS because even if it does fix it, what is the guarantee that I will not encounter it again. I would rather find and fix the cause.
Does anyone have any ideas?
Additional: I have now uninstalled and reinstalled VS2005 and SQL Server 2005 including service packs and am still getting the error.
Additional:
When I ran devenv.exe, the section of the resulting log referencing the GUID indicated an invalid Package Load Key:
<entry>
<record>56</record>
<time>2007/11/15 15:23:53.647</time>
<type>Information</type>
<source>Microsoft Visual Studio</source>
<description>Entering function CVsPackageInfo::HrInstantiatePackage</description>
<guid>{A38CF415-6AD2-45F6-8132-9CC33EBE0629}</guid>
</entry>
<entry>
<record>57</record>
<time>2007/11/15 15:23:53.647</time>
<type>Warning</type>
<source>Microsoft Visual Studio Appid Stub</source>
<description>CheckPackageSignature failed; invalid Package Load Key</description>
<guid>{A38CF415-6AD2-45F6-8132-9CC33EBE0629}</guid>
</entry>
<entry>
<record>58</record>
<time>2007/11/15 15:23:53.663</time>
<type>Warning</type>
<source>Microsoft Visual Studio Appid Stub</source>
<description>CheckPackageSignature failed; invalid Package Load Key</description>
<guid>{A38CF415-6AD2-45F6-8132-9CC33EBE0629}</guid>
</entry>
<entry>
<record>59</record>
<time>2007/11/15 15:23:53.663</time>
<type>Warning</type>
<source>Microsoft Visual Studio Appid Stub</source>
<description>CheckPackageSignature failed; invalid Package Load Key</description>
<guid>{A38CF415-6AD2-45F6-8132-9CC33EBE0629}</guid>
</entry>
<entry>
<record>60</record>
<time>2007/11/15 15:23:53.663</time>
<type>Warning</type>
<source>Microsoft Visual Studio</source>
<description>Appid denied the loading of package</description>
<guid>{A38CF415-6AD2-45F6-8132-9CC33EBE0629}</guid>
</entry>
HiOn our SQl Server (2000) we can have queries that take at least 10-20mins(require full table scan fo billion row table). When one of these queriesis running it substantailly slows down very quick queries (sub secondqueries take several seconds).I believe there is no way to set priorities but was wondering if thereare other configuration settings that could help. The server is dualprocessor so maybe setting maxdop to 1 will help. Memory size isdynmaically assigned up to 4Gb but as the DB size is > 1Tb I'm not sureif allowing this much memory is actually decreasing performance when thequick query trys to get through.Any suggestions.ThanksMike
View 8 Replies View RelatedI originally developed SSIS packages with the destination DB to be SQL Server 2005 for unit testing on my desktop. We are planning on deploying to Oracle. After changing the Provider and other attributes in the configuration file the package loads, however there are lots of issues. The primary one is that the mappings are gone. I'm not sure if that is the result of how the table names are stored "Oracle"."File" versus [SQLSERVER].[File] . Even after attempting to change the way the table names appear I still get the message "the external metadata column is out of sync with the data source columns". Then it lists all of the columns that need to be added.
Is there any way to accomplish this that you are aware of.
Thanks
John Shaening
Hi Everyone,
I've just finish re-installing VS.NET 2005 and tried the Walkthrough: Displaying Data in a Web Forms Page
I followed exactly as it is that is I tested the connection "Connection Sucessful", test Query "Successfull" but when i run it prompt me with the following error message:
-------------------------------------------------------------------------------------------------
Failed to find or load the registered .Net Framework Data Provider.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Configuration.ConfigurationErrorsException: Failed to find or load the registered .Net Framework Data Provider.
Source Error:
[No relevant source lines]
Source File: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesw9f240aab3a2217cc8App_Web_cztxhfge.0.cs Line: 0
Stack Trace:
[ConfigurationErrorsException: Failed to find or load the registered .Net Framework Data Provider.]
System.Data.Common.DbProviderFactories.GetFactory(DataRow providerRow) +1374119
System.Data.Common.DbProviderFactories.GetFactory(String providerInvariantName) +109
System.Web.UI.WebControls.SqlDataSource.GetDbProviderFactory() +63
System.Web.UI.WebControls.SqlDataSource.GetDbProviderFactorySecure() +19
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +120
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +6931
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +213
System.Web.UI.Page.ProcessRequest() +86
System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +18
System.Web.UI.Page.ProcessRequest(HttpContext context) +49
ASP.default_aspx.ProcessRequest(HttpContext context) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesw9f240aab3a2217cc8App_Web_cztxhfge.0.cs:0
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
------------------------------------------------
please help and point out what is the issue?
Thanks in advance for your help.
I have posted this also in one forum. Somebody might have idea here.
We have four Windows 2003 advance servers with SP 3 configured on NLB.
Each of them has one NIC.
Recently we started to get frequent time-out error messages from web applications on those servers when they try to establish the connection with the SQL 2005. If you run web pages application to connect to sql server 10 times, 9 times you will get good connection results and 1 time you will get time-out.
Microsoft OLE DB Provider for SQL Server error '80004005'
Timeout expired
/common/mypage.asp, line 20
Connection to sql server is established with the connection string. Any idea how to solve this problem? Is there a connectionproblem? from NLB to Web to SQL?
We have tried doing some suggestions (e.g. LMHOST, IP, domain account for WEb to SQL connection, the Query Wait in SQL advance property.), but seems this timeout expired still exist
Thanks in advance...
Using BULK Insert with a format file I am receiving the following message:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'STREAMS' reported an error. The provider did not give any information about the error.
The statement has been terminated.
I am running SQL Server 7.0 w/ SP1 applied. The same data file and format files work fine if I use bcp.
The data file contains fixed length records.
Any ideas what the problem is?
I have a package that is failing because of a truncation error. Now, by default (and I leave this for ALL my packages) if one row fails processing the entire package should fail and nothing gets loaded into db. But instead I am actually getting a partial db load.
I have confirmed the "Rows per btach" value (blank) and the "Maximum insert commit size" value (0) for the OLE DB Destination Editor so I have no idea what is going on. Are there any other properties I should be checking?
Thanks.
Jason
Hi, the message below is generated when I try to generate an SSIS configuraiton file. The link does not provide any help. Do you have any suggestion what could cause this error?
Thanks, Piet
==========
TITLE: Microsoft Visual Studio
------------------------------
Could not complete wizard actions.
------------------------------
ADDITIONAL INFORMATION:
Could not generate the configuration file. (Microsoft.DataTransformationServices.Wizards)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Wizards.ConfigurationWizardPages.ConfigurationWizardSR&EvtID=CouldNotGenerateConfigurationFile&LinkId=20476
------------------------------
Failure exporting configuration file.
(QAYTriggerNotify)
All,
Can anyone shed some light on this problem:
Using the same laptop and credentials I can successfully load Report Builder ONLY from the LAN-side of the firewall. However, if I reconnect using my Sprint AirCard I cannot load Report Builder; I get the now infamous "The remote server returned an error: (401) Unauthorized."
What ports are used by Reporting Service?
Thanks,
Brian
I have a package and added a configuration file to it to hold settings such as connection strings etc.
When I open the package up in the designer and check where the configuration file is from, it likes to specify it with a full path like this:
\myserverprojectspackageslah.xml
Where blah.xml is the configuration file and the package file is in the same exact directory.
This creates an issue when I use build and then try to install the package on a server. When installing, the server tries to read the config from \myserverprojectspackageslah.xml which it can not.
Conversely I've tried editing the location in the designer changing it to just be "blah.xml". Then after using the build option I am able to install the package successfully on the server (it can not find the xml file).
However when I then load the package later in the designer to try to edit or chagne it, the designer complains that the "configuration file could not be loaded" and it can't find it even though it is in the same directory that the package definition file is in.
What's going on with this and how do i solve it?
Hello
I have recently downloaded Orcas beta VS product and had no previous version of VS before. The install went clean and I have been able to generate Window apps and web apps with very little issues; however, I have one issue with running a web app using the "view in browser" option for checking an aspx page for validity. If I use the default Northwind database provided and generate an aspx form using the "DataSet" toolbox widget, the tool prompts for the datasource etc. required to generate the required code. I can select the Northwind database and select the desired columns from one of the tables. Once completed, I build the project (clean build) and then select the "view in browser" option to verify the results. The result is an error page indicating a server error ->
Failed to find or load the registered .Net Framework Data Provider.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Configuration.ConfigurationErrorsException: Failed to find or load the registered .Net Framework Data Provider.
I created on odbc connection to an iSeries(as400) box and was successfull in displaying the table on the webpage! I looked into the web.config file and it appears that all the required XML data is present. Any help would be appreciated as I am fairly green when it comes the .NET world.
Thanks
When running the etl I'm getting the error: <SSIS Task>: Shared Memory Provider: Timeout error [258] ; followed by the message "Communication link failure".
What is special about this message that it happens on a SQL Execute task (random task) and the Timeout is after 2 minutes.
When executing the packages separatly it is working fine. The SQL Tasks that are failing are also quit heavy, but reasonable and takes between >2min and 10 - 15 min. Statements are stored procedures that puts an index on 3 mil. records or update statements,...
I had a look to all my (SSIS-etl)Â timeouts and they have the default value 0, the "remote query timeout" of the server is set to 10 minutes. According to me, these are the only one that exists?
There are 2instances on the server each instance has 24GB allocated, the server has 64 in total. Also when the etl runs (that results in an error) no other etl is running on the 2 instances. I'm working with the oledb sql server native client11.0 provider : SQLNCLI11.1.
Hi,
I am using SSRS connecting to DB2 via IBM OLEDB provider for DB2. When I view the reports by clicking the link from report server, it does not show the latest data. But when I refresh the report, it shows the latest data. I feel this is a potential problem from SSRS as the same provider works fine with Crystal reports.
Can anyone throw lights on this?
Thanks,
S Suresh
dear list can anyone figure out a workaround as to why OLEDB Provider MSDORA cannot store passwords
I have all the info stored in a table (Project Real Best Practise)
The user id I have stored in string ConfiguredValue gets transfered to OLEDB Provider MSDORA named (SQL_REAL_Source_myoradb) but not the password
To workaround this bug only with MSDORA can aynonne sugest a setting I should use in package security
ie the default is EncryptSensitiveWithUserKey?
thanks Dave
CREATE TABLE [admin].[Configuration](
[ConfigurationFilter] [nvarchar](255) NOT NULL,
[ConfiguredValue] [nvarchar](255) NULL,
[PackagePath] [nvarchar](255) NOT NULL,
[ConfiguredValueType] [nvarchar](20) NOT NULL
) ON [PRIMARY]
ConfiguredValue = Provider=MSDAORA.1;Password=abc;User ID=myuserid;Data Source=myoradb;Persist Security Info=True
PackagePath = Package.Connections[SQL_REAL_Source_myoradb].ConnectionS
I am looking for solution for "Communication link failure" Â since many months in google but no luck, am running an SSIS package to load data. job failing many times with error 'Communication link failure', searched every where but found nothing.
Below is the complete error description when job failed.
OS - Windows server 2008 R2 Enterprise Edition
RAM - 198GB
 SQL server 2008 R2 Enterprise Edition and error description is below,
Started: Â 6:22:40 AM Â Error: 2015-08-19 18:50:32.70 Â Â Code: 0xC0202009 Â Â Â
Source: Data Flow Task Lookup [193] Â Â Â
Description: SSIS Error Code DTS_E_OLEDBERROR. Â An OLE DB error has occurred.Â
Error code: 0x80004005. Â An OLE DB record is available. Â
[Code] ....
In the MSDN white paper "Microsoft .NET Data Provider for mySAP Business Suite", on page 2, it shows an example of calling a RFC with a variable. Specifically, it states "To execute this statement, you must create a SAPParameter object with the name @var1, specify its value, and add the new object to the SAPCommand object corresponding to the query." How do I create a SAPParameter object?
Brent-GPTX
Which one is better to use? Is there a significant difference between the two?
Does someone have the directions to add ODP.Net to my database connections list in SSRS?
Thanks
I'm trying to set up the Report Manager Virtual Directory. But the little X just wont turn into a tick - even though I click New, then OK, then Apply.
Has anyone else had this problem?
I've managed to get SSRS running before but for the life of me I can't get it going! So annoying! Does anyone have a link to a simple Walkthrough or something for getting SSRS of the ground so that when you navigate to http://localhost/reportserver, you don't get "The Page can not be found".
There are lots of subscriptions (for different reports) that are being sent out for users on a daily and weekly basis.
For the last few weeks, some of these subscriptions fail. It€™s not the same report subscriptions that fail each week. (Some subscriptions of few (different) reports fail each weekJ).
When we reschedule them, it goes out without any issues. Please let me know if you have ever faced such issues with SSRS report subscriptions. Please let me know if you would require more information.
Thanks,
Prakash.P
Hi,
I'm encountering an issue with "Named Pipes Provider, error: 40 windows" and am having problems determining how to fix it due to the environment I'm using. I have two SQL Servers installed on two separate Win2K3 Server boxes, one is SQL Server 2000 and the other is SQL Server 2005. The SQL Server 2000 contains the actual application data. The 2005 database is used only for Reporting Services. I've set up the reports on SSRS such that their datasources hit the 2000 server. This is using SQL Server authentication.
When testing the reports via SSRS (in Visual Studio 2005), the connection to the data works and the reports are generated fine. When I deploy them to the reporting server and launch IE to test locally (still on the 2005 box), I get this "Named Pipes Provider, error 40" issue. I made sure that Named Pipes and TCP were enabled and the port set at 1433 (to match that on the 2000 box).
Now I changed the datasource's authentication from SQL Server to Windows authentication. I tested this in SSRS and this works too. When I redeployed the reports with this authentication change, testing the reports via IE locally (on the 2005 box) worked (using Administrator login). Great. Now when I open IE on an external box, i.e. on the 2000 box, and try to test the reports using that server's Administrator login, I get this same error 40 issue. I've been through a few threads describing the error 40, fiddling around with the SQL Server configuration as well as SSRS, to no avail. I have a feeling this error 40 issue has to due with permissions/authentication between the SQL Server boxes but I can't really be sure. Anyone have any ideas on how to troubleshoot my situation. Thanks.
larry
I am getting this error when sending an excel file via email.
Failure sending mail: The Report Server has encountered a configuration error; more details in the log files
The scheduled job which emails an excel spreadsheet has been working and now it doesn't. I've done some research and this KB article is close to the error that I'm seeing however the win 32 error 87 is different. http://support.microsoft.com/?kbid=842423
Has anyone any idea's? I have not applied the hotfix for SSRS 2000 sp2.
Log file has this.
ReportingServicesService!library!7b4!09/28/2006-15:00:08:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The Report Server has encountered a configuration error; more details in the log files, AuthzInitializeContextFromSid: Win32 error: 87;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The Report Server has encountered a configuration error; more details in the log files
ReportingServicesService!library!7b4!09/28/2006-15:00:08:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties.
ReportingServicesService!emailextension!7b4!09/28/2006-15:00:08:: Error sending email. Microsoft.ReportingServices.Diagnostics.Utilities.RSException: The Report Server has encountered a configuration error; more details in the log files ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The Report Server has encountered a configuration error; more details in the log files
at Microsoft.ReportingServices.Authorization.Native.GetAuthzContextForUser(IntPtr userSid)
at Microsoft.ReportingServices.Authorization.Native.IsAdmin(String userName)
at Microsoft.ReportingServices.Authorization.WindowsAuthorization.IsAdmin(String userName, IntPtr userToken)
at Microsoft.ReportingServices.Authorization.WindowsAuthorization.CheckAccess(String userName, IntPtr userToken, Byte[] secDesc, ReportOperation requiredOperation)
at Microsoft.ReportingServices.Library.Security.CheckAccess(ItemType catItemType, Byte[] secDesc, ReportOperation rptOper)
at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml, ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyDate)
at Microsoft.ReportingServices.Library.RSService._GetReportParameters(String report, String historyID, Boolean forRendering, NameValueCollection values, DatasourceCredentialsCollection credentials)
at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters)
at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute()
at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobTypeEnum type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
at Microsoft.ReportingServices.Library.ReportImpl.Render(String renderFormat, String deviceInfo)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.ConstructMessageBody(IMessage message, Notification notification, SubscriptionData data)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.CreateMessage(Notification notification)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
I have developed an SSIS Package which is the Data Source for a Reporting Services report (using the OLE DB Destination DataReader component - very cool and powerfull!!!).
I have one Connection Manager defined in the package to access a SQL Server 2000 Database. The authentication is set to SQL Server Authentication (per the documentation in BOL) where I provide the UserID and Password.
Here is what works and what doesn't work:
In BIDS on my local machine the report executes beautifully.
When deploying the SSIS Package to my local machine's Integration Services File System and the report to my local machine's Report Server database the report executes beautifully (Yes, I'm using the developer edition).
When deploying the package to a W2003 Server Integration Services installation as well as deploying the Report and Data Source to the same W2003 Server's Reporting Services installation - the report fails.
I think it is because the passsword to the SQL Account is not "set". I am able to run the package through BIDS via dtexecui on this W2003 server successfully. However, when I run the report on the server it fails.
I am guessing it is because the password for the SQL Server Authenitcation is not "there". I am encrypting via "Save SensitiveDataWithPasssword".
What am I doing wrong? Any suggestions would be welcome.
I'm using Virtual PC on my WinXP PC, with two W2K3 environments runnings as Virtual PC guests. My goal is to use these virtual servers to emulate a distributed SSRS environment--prior to setting up a similar environment on physical servers.
One of the W2K3 guests is my database server; the other W2K3 guest is my report server. Just like with a physical SSRS environment, there are many choices that need to be made during the installation and configuration--any one of which, it seems, can prevent the environment from working properly.
Currently, I'm struggling with getting my virtual distributed SSRS environment to work. I could go into the details, but I figured I'd ask a basic question first: Is anyone aware of a book, magazine article, blog, etc. that goes through a distributed SSRS installation--listing the requirements, discussing the choices, considering the implications, etc.?
Off the top of my head, such a walk-through would ideally cover networking configuration issues (Virtual PC or otherwise), Active Directory considerations, Windows Firewall settings between the servers, SSRS-related service account selections, authentication between the servers, etc.
If no one has produced such a walk-through (!), I'd be happy to write one so that others don't have to deal with the same struggles I'm currently dealing with....but I'd need your help.
I am using BIDS 2012.I am getting this error: Unable to load assembly U2.
Data.Client, Version=2.1.0.0, Culture=neutral , PublicKeyToken=9ab9148678f4f448, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error.Â
---> System.IO.FileNotFoundException: Could not load file or assembly 'U2.Data.Client, Version=2.1.0.0, Culture=neutral, PublicKeyToken=9ab9148678f4f448' or one of its dependencies. The system cannot find the file specified.
[code]....
I am expecting
C:WindowsMicrosoft.NETFramework64v4.0.30319configmachine.config
how can I force SSRS to use "C:WindowsMicrosoft.NETFramework64v4.0.30319configmachine.config".