Replication :: Unable To Start Execution

May 7, 2015

Recently we rebuilt one of the cluster node (due to some issues with SP), where distribution agent resource or instance was running after rebuilding that node, we failed over distribution resource to that (newly built) node and after that log reader agent jobs were in suspended status. After checking the job history, we got the below error "Unable to start execution of step 2 (reason: The LogReader subsystem failed to load [see the  file for details]; The job has been suspended).  The step failed."After getting lot of search did not get exact solution which matches to the environment

View 3 Replies


ADVERTISEMENT

Snapshot Agent Cannot Start Server Execution Failed

May 22, 2006

Hello, I've configured SQL Server 2000 for merge replication and am trying to start the snapshot agent for the publication and after about 20 minutes of it trying to start, it gives up with this error.



Server execution failed

There is no more information in the event viewer. I've tried it with a bunch of different subscriptions. SQL Server and SQL Agent are running under a local account which has access to the replcation data directory. SQL Agent is running.

I'm Running SQL 2000 SP3.

Thanks

Robert Brown

View 3 Replies View Related

Replication Issues After A Database Restore - Unable To Drop Or Create Transactional Replication

Sep 13, 2007

Hi,I have transactional replication set up on on of our MS SQL 2000 (SP4)Std Edition database serverBecause of an unfortunate scenario, I had to restore one of thepublication databases. I scripted the replication module and droppedthe publication first. Then did a full restore.When I try to set up the replication thru the script, it created thepublication with the following error messageServer: Msg 2714, Level 16, State 5, Procedure SYNC_FCR ToGPRPTS_GL00100, Line 1There is already an object named 'SYNC_FCR To GPRPTS_GL00100' in thedatabase.It seems the previous replication has set up these system viewsSYNC_FCR To GPRPTS_GL00100. And I have tried dropping the replicationmodule again to see if it drops the views but it didn't.The replication fails with some wired error & complains about thisviews when I try to run the synch..I even tried running the sp_removedbreplication to drop thereplication module, but the views do not seem to disappear.My question is how do I remove these system views or how do I make thereplication work without using these views or create new views.. Whyis this creating those system views in the first place?I would appreciate if anyone can help me fix this issue. Please feelfree to let me know if any additional information or scripts needed.Thanks in advance..Regards,Aravin Rajendra.

View 2 Replies View Related

Unable To Start SQL Service

May 1, 2008

I am unable to start SQL service on my system after i rebooted it

following is the message that i get
SQL Service on Local Computer started and then stopped. Some service stop automatically if they have no work to do

following is the corresponding entry in event viewer
TDSSNIClient initialization failed with error 0x7e, status code 0x60.

View 8 Replies View Related

Unable To Start SQLEXPRESS

Nov 26, 2006

Hi

I have downloaded and installed the trial version of MS Visual Studio 2005 Team System. The installation was successful. However, I am not able to start SQLEXPRESS using the SQL Server Configuration Manager. It shows me SQLEXPRESS but when I right click and select Start it tries to start the service and after some time gives the following error

"The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details."

The event log shows the following errors:

1. FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf'. Diagnose and correct the operating system error, and retry the operation.

2. FCB::Open failed: Could not open file c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf for file number 2. OS error: 5(Access is denied.).

I tried enabling remote connections but still got the same error.

Please help.

Regards

Rajat

View 5 Replies View Related

Unable To Start Server

May 28, 2008

My Server service will not start, i get a message saing consult the logs, in the error logs it says error in the model db .ldf file. However, i can not connect to the server to restore from my back ups. I get the error msg, your server may not be configured to accept remote connection. No, i dont know what im doing and my only though is to start from scratch reinstalling the server. Any help is apreciated.

View 6 Replies View Related

SQL 2012 :: Long Delay Between Job Start And Actual Package Execution

May 7, 2014

I have problems sometimes with a package.

There is and SQL Agent job that starts a package (from a file system using cmd command). Usually job takes 8-10 minutes. But sometimes it get stuck for a long time (1+ hour).

DTexec process can be found with procmon, but it seems it just not doing anything (And package is not logging to file Start of the execution) After long wait it just runs a package quickly.

I've moved a package to SSIS catalog to try to get more detailed logging, but with no luck.

Job starts at 1 PM, package execution starts at 1:49 PM. Without any messages about the execution in SSISDB log.

First I've thought it might be long validation problem, but when package executes validation messages are there and they perform quick.

View 3 Replies View Related

Unable To Start SQL Server Agent

Oct 15, 1999

I need to start SQL Server Agent so that I can run scheduled jobs. I am running SQL Server 7.0 with windows NT 4.0 service pack 4. When I try to start the agent I get the following error

Error 22003: StartService() returned error 5,'Access is denied'

Does anyone have an idea as to why this is happening?
Any help with this problem would be appreciated.
Thanks

Phil

View 1 Replies View Related

Unable To Start The MS SQLServer Service

Jan 12, 2004

Message logged in the SQL Server is

Failed to report the current event. Operating
system error = 31(A device attached to the system is not functioning.).

The OS has been Shutdown and Restarted again but I am not able to start the SQL Server thereafter.

Kindly Suggest

View 8 Replies View Related

Unable To Start Sql Debug Session

Feb 27, 2004

Hi,

I get this error message each time i try to run the vb application in visual studio .net environment.
--------------------------------------------------------------------------------
"Unable to start SQL debug session. Ensure sqldbreg2.exe and proxy/stub DLL sqldbg.dll are registered on this machine"
-------------------------------------------------------------------------------

I am running visual studio and sql server 2000 on the same machine. I have given permission to sqldebugger user to access the system32 folder and sql debugging folder. This error message is followed by

-------------------------------------------------------------------------------
Attaching the T Sql debugger to process[proj1.exe] on machine 'my machine name' failed Error code 0x80004004
------------------------------------------------------------------------------

I am running MS SQL Server 2000 on windows 2000 adv server.

what can be done to remove this error. Thaks in advance

Sivaraj.

View 1 Replies View Related

Unable To Start MS Analysis Service

Apr 28, 2004

Hi Gurus,

I have installed MS analysis service(OLAP) on my lap top

my user is in the Administrative group , other than that I tried creating a user with 'OLAP ADMINISTRATOR' privilate and tried to start the ms analysis service

I am getting the error , unable to start the service on server(), you are not a member of OLAP Administrators group

I tried to install the service pack 3 from Microsoft

Could you pleae guide me to start this serivice
Thanks,

View 2 Replies View Related

SQL 2012 :: Unable To Start Agent

Apr 2, 2015

As my sql agent is not starting due to XP's are disabled . when I ran the sp_configure with override and changed to 0 to 1 when I am starting the agent the configured value will be back to again 0 and in logs.Waiting for SQL Server to recover database 'msdb'...ODBC Error: 0, Invalid character value for cast specification [SQLSTATE 22018]

View 1 Replies View Related

Unable To Start SQL Server Service

Sep 7, 2006

Hi all

When i started the service, i am getting the following message
Starting up database 'master'.
Error: 9003, Severity: 20, State: 1.
Cannot recover the master database. Exiting.

i tried starting using -f -m paramters,but could not succeed
i don't have any backups for master database
is there any way i can restore it from .mdf, .ldf files..

Pls suggest..

Thanks in advance

View 12 Replies View Related

Unable To Start MS SQL Server Services

Dec 11, 2007

I have a client server application and it is running in the following configuration: SERVER A: MS Server2003 with MS SQL2000, Our ERP application software is installed on this server as is MS SQL200.

Server B: is our e-commerce server and it is running MS Windows2000 server OS and no MS SQL. The e-commerce application is pointed to the active SQL server on server A. I am trying to run a software version upgrade on on software application (which was successfully run on server A) When we try to run this upgrade on server B we get a message: " Setup is unable to start MS SQL Server Services, please start and try again"

I do not understand what is going on with this. SQL & SQL Service Agent is running on Server A. Any suggestions as to what I need to do?

www.accellus.com

View 1 Replies View Related

Unable To Start SQL Browser Service

Jan 23, 2008

Hi,

I was unable to start SQL Browser Services (time out) after installing SQL Server 2005 Analysis Services. The configuration of the server is

1. Win 2003 R2
2. Sql Server 2000 SP4
3. Sql Server 2005

Anybody has encountered this before? Any advice will be good.

Thanks!!

View 1 Replies View Related

Unable To Start SQL Sever Express

Jul 22, 2007

Hello Friends



I'm running VS2005prof.+sp1, SSE Adv (with sp2) SSE ToolKit. Its been running without problems since installation (April 12.2007) Last week I ran into a problem which started off as



"An attempt to attach an auto-named database for file D:DataVBNetVisual Studio 2005ProjectSolutionsAR1403inDebuginDebugApp_DataAR1403.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share."



and went down hill rapidly to the point now where I can't even start it up. Here's the error log:



2007-07-21 22:51:07.55 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)

2007-07-21 22:51:07.55 Server (c) 2005 Microsoft Corporation.
2007-07-21 22:51:07.55 Server All rights reserved.
2007-07-21 22:51:07.55 Server Server process ID is 2656.
2007-07-21 22:51:07.55 Server Authentication mode is WINDOWS-ONLY.
2007-07-21 22:51:07.56 Server Logging SQL Server messages in file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-07-21 22:51:07.56 Server This instance of SQL Server last reported using a process ID of 304 at 7/21/2007 5:42:20 PM (local) 7/21/2007 9:42:20 PM (UTC). This is an informational message only; no user action is required.
2007-07-21 22:51:07.66 Server Registry startup parameters:
2007-07-21 22:51:07.66 Server -d c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-07-21 22:51:07.66 Server -e c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-07-21 22:51:07.66 Server -l c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-07-21 22:51:07.75 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-07-21 22:51:07.75 Server Detected 1 CPUs. This is an informational message; no user action is required.
2007-07-21 22:51:07.86 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-07-21 22:51:08.02 Server Database mirroring has been enabled on this instance of SQL Server.
2007-07-21 22:51:08.04 spid5s Starting up database 'master'.
2007-07-21 22:51:08.70 spid5s SQL Trace ID 1 was started by login "sa".
2007-07-21 22:51:08.85 spid5s Starting up database 'mssqlsystemresource'.
2007-07-21 22:51:08.99 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-07-21 22:51:09.51 spid8s Starting up database 'model'.
2007-07-21 22:51:09.51 spid5s Server name is 'ADSSQLEXPRESS'. This is an informational message only. No user action is required.
2007-07-21 22:51:09.52 spid5s Starting up database 'msdb'.
2007-07-21 22:51:10.08 Server Error: 17190, Severity: 16, State: 1.
2007-07-21 22:51:10.08 Server FallBack certificate initialization failed with error code: 1.
2007-07-21 22:51:10.08 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2007-07-21 22:51:10.08 Server Error: 17182, Severity: 16, State: 1.
2007-07-21 22:51:10.08 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
2007-07-21 22:51:10.08 Server Error: 17182, Severity: 16, State: 1.
2007-07-21 22:51:10.08 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
2007-07-21 22:51:10.08 Server Error: 17826, Severity: 18, State: 3.
2007-07-21 22:51:10.08 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-07-21 22:51:10.08 Server Error: 17120, Severity: 16, State: 1.
2007-07-21 22:51:10.08 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.

-----------



I've tried following various suggestions I found on the Net, however, after 3-days it does seem as though I'm not getting anywhere. Shoud I uninstall and re-install SSE and if so is there a specific step by step step procedure I can follow. Or is there a sure fire way to fix the probelm without re-installation?

Your help is greatly appreciated.



Gary

View 4 Replies View Related

SQL Unable To Start After Login Account Change

Jul 25, 2007

I have a SQL 2k5 ent. 64 bit on Windows 2003 Ent x64 edition.



The sql server was running fine under localsystem account. Recently I changed the service account to a local user (part of users group in windows) and implemented permissions according to KB article 283811. (have imlpemented the same on many other sql servers without issue).



However, the SQL services are not starting up and I am seeing the following errors in the errorlog.



===================

2007-07-25 12:36:55.90 spid11s Server name is 'HBCARPROD'. This is an informational message only. No user action is required.

2007-07-25 12:36:55.90 spid13s Starting up database 'model'.

2007-07-25 12:36:55.90 Server Error: 17182, Severity: 16, State: 1.

2007-07-25 12:36:55.90 Server TDSSNIClient initialization failed with error 0x5, status code 0x51.

2007-07-25 12:36:55.90 Server Error: 17182, Severity: 16, State: 1.

2007-07-25 12:36:55.90 Server TDSSNIClient initialization failed with error 0x5, status code 0x1.

2007-07-25 12:36:55.90 Server Error: 17826, Severity: 18, State: 3.

2007-07-25 12:36:55.90 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.

2007-07-25 12:36:55.90 Server Error: 17120, Severity: 16, State: 1.

2007-07-25 12:36:55.90 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.



====================================



I have gone through the http://blogs.msdn.com/sql_protocols but everything mentioned here seems to be there. I understand this is some permission issue. Just not able to find it out. Can anybody help?

View 5 Replies View Related

DB Engine :: Unable To Start Audit Job From SSMS

Oct 8, 2015

SQL server 2012, I tried to start Audit log from SSMS, I received following error.

Enable failed for audit error 33222, for more information see sql Server error log .

query ss.dm_os_ring_buffers

View 8 Replies View Related

Unable To Create An Execution Snapshot For My Report

May 18, 2008



Dear All-
i am facing a problem with them creation of the execution Snapshot for my report

simply when i try to create a one and after choose the schedule setting and i press OK to finish
an error appear mention "The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. (rsInvalidDataSourceCredentialSetting) (Report Services SOAP Proxy Source)"

i like to mention also i choose the datasource credentials is the redio button Windos integrated security and also the reporting services and the database are exit on the same machine

i hope someone help soon as our work is affected due to this issue


Thanks and have anice day
Maylo

View 1 Replies View Related

Unable To Start T-SQL Debugging. Could Not Connect To Computer 'servername'.

Nov 9, 2007



I thought I would post how I got remote t-sql debugging working in my environment. Hope it might help someone.
I have two domains, DomainA and DomainB. DomainB has a one way external trust to DomainA. Dev Vista machine running VS 2005 is in DomainA logged in as user DomainAauser. SQL 2005 running on test Windows Server 2003 DC machine in DomainB under user DomainBuser. When trying to 'step into stored procedure' in VS, whether my data connection used windows authentication or sql server authentication, I would get the 'Unable to start T-SQL degbuggin...'. I could debug t-sql when I logged into the domain controller (console or rdp) and running VS on the server. I changed the SQL Server service to run under the DomainAauser account and I can now remote t-sql debug using both window authentication and sql server authentication. Hope this may help anyone that might run into this.

Regards,
RMcc

View 1 Replies View Related

Unable To Start Service SQL Server Agent On ETC000211V

Apr 25, 2007

Hi,



When I click on SQL Server agent I get the "Unable to start service error".

It says serivce started and stopped.

Anybody having any clue on what's going wrong. Please let me know.



Regards,

HV

View 3 Replies View Related

Unable To Start SQL Server In Single User Mode...

Jun 10, 2007

I am trying to migrate a instance , while trying to rename the server i am getting the following error.



Error: Instance name exceeds maximum length

Aborting Initialization



The instance name is 20 char long.



Please let me know if there is any workaround.



Thanks in advance.

View 3 Replies View Related

SQL Server 2005 SP2 Install Failed Now Unable To Start

Feb 22, 2007

Ran the SP2 locally on a Windows Server 2003 SP1 box that had SQL Server 2005 SP1 install on it. Problem was I ran out of C: drive and it failed in the middle of upgrading the server.

I'm unable to start the SQL Server at all now. Is there any way to back this out? Don't think I can reapply any patches since the service is dead.

Eventlog now shows:
One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup.

The log shows it's unable to start SQL (blames it on permisions but it's because SQL can no longer start)

Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29538
Error Description : MSP Error: 29538 SQL Server Setup did not have the administrator permissions required to rename a file: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmssqlsystemresource1.mdf. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.


I'm guessing its reinstall time but not sure how the attached databases will like that idea.

Thanks in advance for any ideas.

View 6 Replies View Related

Unable To Start T-SQL Debugging. Could Not Attach To SQL Server Process On

Jul 27, 2006

Please help! I cannot debug CLR procs remotely. Whenever I try to start debugging in VS2005 I get the error: Unable to start T-SQL Debugging. Could not attach to SQL Server process on .... I have clr enabled set to 1 and I have Allow SQLCLR Debugging set on. But I continue to get this error. Any help would be greatly appreciated.

Thanks!

GN

View 21 Replies View Related

Unable To Start An .mdf Instance Under A Specific Debuging Mode.

Aug 21, 2007

I have an ASP.NET project that uses a ASPNETDB.MDF file. This file is attached with a SQL Server Express everytime when I run the application, include debuging session. There are two debugging modes under Visual Studio 2005, through WebDev.WebServer or IIS. Both ways worked fine with this project until yesterday. Right now, whenever I try to debug it with WebDev.WebServer, it will show me an error:
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
But if I debug it with IIS it works fine. Also, using the same machine and same installation of Visual Studio 2005 I can debug another project with WebDev.WebServer, that also uses a .mdf file (a different file). So, seems to me I jsut have problem with one mode and one project. The only thing that I did yesterday that I think may be relevant was that I reinstalled Visual Studio 2005 SP1 to fix another issue. Anyone has an idea? Thanks!

View 3 Replies View Related

Unable To Start SqlServerAgent Service In A Sql 2005 Cluster

Jul 4, 2007

hi all

i'm using a domain accout to setup a sql 2005 cluster in a win2003 cluster.when the installation ended,the SqlServerAgent service can't be started.the event in event viewer

is "SQLServerAgent could not be started (reason: Unable to connect to server "(local)"; LServerAgent
cannot start). " (event id 103 ,source sqlserveragent).I try to use local system and network service account to start it,but it's all the same.

And i found i can connect to the sql cluster vitrual ip 10.73.2.224,but can't connect to the node A.So i enable all the network protocols for the instance MSSQLSERVER,and also enable every ip in the TCP/IP protocol,then restart the sqlserver service,but it still doesn't work.

Any advise?Thanks a lot.

View 3 Replies View Related

Unable To Start Reporting Services On Local Machine

Apr 6, 2008

I am new to SQL Server 2005 Reporting Services and I€™m having problems starting the service. I am running a Windows XP SP2 with SQL Server 2005 and reporting services but the service will not start. My SQL Server instance logs on using €˜Windows Authentication€™ using a username sysadm with no password

I have installed IIS and made sure that ASP.net is running.

I have opened up the Report Services Configuration Manager and amended the settings but I€™m unable to get the service started!!!

Theses are my settings

i) Report Server Virtual Directory OK
Name: ReportServer1
Website: Default Web Site

ii) Report Manager Virtual Directory
Name: Reports1
Website: Default Web Site

iii) Windows Service Identity
Service name: ReportServer
Service Account: NT AuthorityLocal Service

Iv Web Service Identity (NOT WORKING)


v) Database Setup
Servername €“ Nameofmyserver
Database name - ReportServer1
Credential Type Server Credentials


When I click on start no error message appears, it just seems to time out.

View 5 Replies View Related

Unable To Start Working On SQLserver Express 2005

Feb 2, 2008

I'm having a 3.0 GHz machine with 512MB Ram. however when i tried to run sql server 2005. this is the result of the System Configuration Check

- WMI Service Requirement (Success)
Messages
* WMI Service Requirement

* Check Passed

- MSXML Requirement (Success)
Messages
* MSXML Requirement

* Check Passed

- Operating System Minimum Level Requirement (Success)
Messages
* Operating System Minimum Level Requirement

* Check Passed

- Operating System Service Pack Level Requirement. (Success)
Messages
* Operating System Service Pack Level Requirement.

* Check Passed

- SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility

* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.

- Minimum Hardware Requirement (Warning)
Messages
* Minimum Hardware Requirement

* The current system does not meet the minimum hardware requirements for this SQL Server release. For detailed hardware and software requirements, see the readme file or SQL Server Books Online.

- IIS Feature Requirement (Warning)
Messages
* IIS Feature Requirement

* Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.

- Pending Reboot Requirement (Success)
Messages
* Pending Reboot Requirement

* Check Passed

- Performance Monitor Counter Requirement (Success)
Messages
* Performance Monitor Counter Requirement

* Check Passed

- Default Installation Path Permission Requirement (Success)
Messages
* Default Installation Path Permission Requirement

* Check Passed

- Internet Explorer Requirement (Success)
Messages
* Internet Explorer Requirement

* Check Passed

- COM Plus Catalog Requirement (Success)
Messages
* COM Plus Catalog Requirement

* Check Passed

- ASP.Net Version Registration Requirement (Success)
Messages
* ASP.Net Version Registration Requirement

* Check Passed

- Minimum MDAC Version Requirement (Success)
Messages
* Minimum MDAC Version Requirement

* Check Passed

furthermore i get error 26 when trying to create new sql server database. and while doing the SQL server surface area configuration i got this message.:

SQL Server 2005 components were found on the specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLSAC)
------------------------------
Program Location:
at Microsoft.SqlSac.MainPanel.FormFeatures..ctor(String machineName, Form callingForm)

HOpefully somebody out there will help me...or is this problem only appearing in sql server 2005 and would it be a better decision to install SQL server 2000...or if someone can help me rectify this problem i'll be really thankful.

View 4 Replies View Related

SQL Server 2008 :: Unable To Start Agent Due To Blocked Access

Jun 28, 2015

Had some big problems with my SQL Server 2008 R2 SP1 during the last maintenance running on Windows Server 2008 R2 Enterprise ( upgraded from Standard). I'm getting the following error,

"SQL Server blocked access to procedure 'dbo.sp_sqlagent_has_server_access' of component 'Agent XPs' because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of 'Agent XPs' by using sp_configure. For more information about enabling 'Agent XPs', see "Surface Area Configuration" in SQL Server Books Online."

I did a google search and found others with the problem but the resolution isn't working for me. I ran the following commands, heck I ran them multiple times. No errors come back running these commands. But the same error keeps happening, I even restart the service and then the server again.

sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'Agent XPs', 1;
GO
RECONFIGURE
GO

The msdb got too big for the disk it was on. I had maintenance plans to clear out the all of histories but I didn't think of the mail items. When I finally saw this problem I tried clearing them out using the stored procedures only with it finally failing because the transaction log got full. Since we didn't have a lot of jobs scheduled I decided to just recreate the msdb. So I scheduled a maintenance window, download SQL Server Service Pack 3.

my steps are as follows:
->diff backup of msdb
->stopped the service and started it again with: NET START MSSQLSERVER /T3608
->detached msdb with: SQLCMD -E -SP-SRVR-SQL-01 -dmaster -Q"EXEC sp_detach_db msdb"
->moved it off the drive
->restarted the service without any startup flags
->recreated msdb with: SQLCMD -E -SP-SRVR-SQL-01 -i"D:Microsoft SQL ->ServerMSSQL10_50.MSSQLSERVERMSSQLInstallinstmsdb.sql" -o"D:Microsoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLInstallinstmsdb62715.out"

I looked at the log file and there were no actual error messages so I applied service pack 3 and restarted server after it installed, was actually prompted to restart. In my tests I was never prompted to restart the server.Now I never started the agent service after recreating the msdb database since I knew it wasn't on the same version. I just went directly to the latest SP. Our applications are running fine but now I cant do scheduled backups.

View 1 Replies View Related

DB Engine :: Unable To Start Distributed Transaction Between Two Clustered Servers?

Jul 2, 2015

I have 4 servers, 2 each for application (Dev & Prod)

DEV 1 & DEV 2 are standalone servers 

Prod 1 & Prod 2 are Windows Clustered Servers.

From one application to other we do Distributed transactions. Dev 1 - Dev 2 or Dev 2 - Dev 1 can start DTC and working fine,but issue comes when Prod 1 - Prod 2 or Prod 2 - Prod 1. I get error message OLE DB provider "SQLNCLI" for linked server "xyz" returned message "No transaction is active.".

Msg 7391, Level 16, State 2, Line 3

The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "xyz" was unable to begin a distributed transaction.

I have tested Dev 1 - Prod 1, Dev 1 - Prod 2, Dev 2 - Prod 1, Dev 2 - Prod 2 everything is working fine only Production servers are causing issue.

I enabled all settings needed for DTC on Cluster MSDTC service but no luck.

View 2 Replies View Related

Unable To Start SQL Express 2005 Service As A Network User

Oct 4, 2007

I am trying to start ms sql server 2005 express as a network user from originally starting as local system. I cannot start the service.

I have given this network user administrator access to sql express from the sql server surface area configuration "Add New Administrator". I have went into the local users/groups and added this network user to the 3 security groups

SQLServer2005MSSQLServerADHelperUser$SQL1
SQLServer2005MSSQLUser$SQL1$SQLEXPRESS
SQLServer2005MSSQLBrowserUser$SQL1


I receive one alert int he event logs/application

EventID: 26010

The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.

I receive five errors in the event logs/application

EventID: 26014

Unable to load user specified certificate. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.

EventID: 17182

TDSSNIClient initialization failed with error 0x80092004, status code 0x80

EventID: 17182
TDSSNIClient initialization failed with error 0x80092004, status code 0x1

EventID: 17826

Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately prceding this one in the error log.

EventID: 17120

SQL Server could not spawn the FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.

I don't recall assigning any sql specific certificates. The reason I'm trying to run this as a network user is because an application on a remote windows server requires it.

After starting the service back running as local system as it was before, I went into the
SQL Server Management Studio Express and edited the properties for this new network user I wish to run the service as. I gave him full access including checking all grants in securables.

I now see a bit of a difference in the event logs with these errors.

EventID: 17058

initerrlog: Could not open the log file 'c:Program FilesMicrosoft SQL ServerMSSQL1MSSQLLOGERRORLOG.' Operating system error =5(Access is denied).

I saw a notification when changing the sql server service's logon that the new network user has been granted the log on locally right.

The second and last new error is

EventID: 17053

UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered.

View 6 Replies View Related

SQL Server 2005 Rendered Unable To Start Post SP2 Install. Help!

Jun 12, 2007

Hi can someone help me please? I browsed through the SP2 install feedback below, but it doesn't quite seem to fit what happened to my install. My .MDF and .LDF files for the system databases are in C:Program FilesMicrosoft SQL ServerMSQL.1MSQLData (I presume this is the correct location.)

I am the local administrator on this box.

I uploaded the .CAB file with all the logs onto www.sendspace.com if it gives you something to go on.

The only other thing of note is that it said there were two machines on the network and that I needed to change my machine name in the control panel when I installed. This doesn't seem right, as far as I understand the computer name is unique.

The SQL Server runs under the local system account, if that is of any use.

I attempted uninstalling and reinstalling the SQL native client MSI package in the hope it would be a simple fix similar to that chap further down the page, but that didn't help at all either.

.CAB file of installation logfiles is here: http://www.sendspace.com/file/7ihoet

kind regards
Jason




ERRORLOG starting SQL Server post failed SP2 install



2007-06-12 19:55:21.94 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)

2007-06-12 19:55:21.96 Server (c) 2005 Microsoft Corporation.
2007-06-12 19:55:21.96 Server All rights reserved.
2007-06-12 19:55:21.97 Server Server process ID is 5468.
2007-06-12 19:55:21.97 Server Authentication mode is MIXED.
2007-06-12 19:55:21.97 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-06-12 19:55:21.97 Server This instance of SQL Server last reported using a process ID of 5756 at 12/06/2007 19:36:35 (local) 12/06/2007 18:36:35 (UTC). This is an informational message only; no user action is required.
2007-06-12 19:55:21.97 Server Registry startup parameters:
2007-06-12 19:55:21.99 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-06-12 19:55:21.99 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-06-12 19:55:21.99 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-06-12 19:55:22.00 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-06-12 19:55:22.00 Server Detected 4 CPUs. This is an informational message; no user action is required.
2007-06-12 19:55:22.17 Server Address Windowing Extensions is enabled. This is an informational message only; no user action is required.
2007-06-12 19:55:22.33 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-06-12 19:55:22.57 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-06-12 19:55:23.60 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-06-12 19:55:23.63 Server Database mirroring has been enabled on this instance of SQL Server.
2007-06-12 19:55:23.72 spid5s Starting up database 'master'.
2007-06-12 19:55:24.07 spid5s SQL Trace ID 1 was started by login "sa".
2007-06-12 19:55:24.11 spid5s Starting up database 'mssqlsystemresource'.
2007-06-12 19:55:24.13 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-06-12 19:55:24.29 spid5s Server name is 'GBLOND088SQ8MSQL_CREDS_DEV1'. This is an informational message only. No user action is required.
2007-06-12 19:55:24.29 spid9s Starting up database 'model'.
2007-06-12 19:55:24.30 Server Error: 17182, Severity: 16, State: 1.
2007-06-12 19:55:24.30 Server TDSSNIClient initialization failed with error 0x34, status code 0x1e.
2007-06-12 19:55:24.30 Server Error: 17182, Severity: 16, State: 1.
2007-06-12 19:55:24.30 Server TDSSNIClient initialization failed with error 0x34, status code 0x1.
2007-06-12 19:55:24.30 Server Error: 17826, Severity: 18, State: 3.
2007-06-12 19:55:24.30 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-06-12 19:55:24.30 Server Error: 17120, Severity: 16, State: 1.
2007-06-12 19:55:24.30 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.

View 7 Replies View Related

Sqlserver 2005 Unable To Start Mssqlserver Service (access Denied)

Aug 12, 2007

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved