Reporting Services - Chart X-axis - Define HH:MM For A Group Category?
Oct 5, 2007
I have a chart that I am grouping data by Year, Month, day then Hour (this is to view server performance data) - however i need the label for the hour grouping to be in the format of HH:MM and not H:M by using expression
=HOUR(Fields!Timestamp_perfmon.Value) &":"&MINUTE(Fields!Timestamp_perfmon.Value)
...but this as you would kind of expect returns 0-23:0-5 ie 18:1 whereas i need it to return 18:12 or 8:12 PM..
when i change the format code for the x-axis it unfortunatey screws up all my other group by values and labels..
can anyone help?
View 2 Replies
ADVERTISEMENT
Oct 8, 2007
I have a chart that I am grouping data by Year, Month, day then Hour (this is to view server performance data) - however i need the label for the hour grouping to be in the format of HH:MM and not H:M by using expression
=HOUR(Fields!Timestamp_perfmon.Value) &":"&MINUTE(Fields!Timestamp_perfmon.Value)
...but this as you would kind of expect returns 0-23:0-5 ie 18:1 whereas i need it to return 18:12 or 8:12 PM..
when i change the format code for the x-axis it unfortunatey screws up all my other group by values and labels..
can anyone help? Please....
View 2 Replies
View Related
Jul 27, 2015
What is the best optimised options to display the date labels with bi-weekly intervals starting date Date from one month to three months future from the current date?
As per above requirements, I have built the below line graph query and graph, currently it only displays the date labels as per data but I need to display date labels with bi-weekly intervals starting date from one month to three months future from the current date. Also another issue found, if there are few more date labels then does not show all labels on horizontal axis.
Select
/* Set Week End date as Sunday */
DATEADD(DAY, 7 - DATEPART(WEEKDAY, t.TaskBaseline0FinishDate), CAST(t.TaskBaseline0FinishDate
+1 AS DATE)) as[WeekEnd]
,count(t.TaskBaseline0FinishDate) as Baseline
,count(t.TaskFinishDate) as Finish
[Code] .....
View 3 Replies
View Related
May 22, 2015
I have requirement where i want to show my chart report data in Y axis...it is possible in SSRS 2008R2? or it is possible only in SSRS 2012 only?
View 7 Replies
View Related
Aug 20, 2015
I have a bubble chart created with Report Builder 3.0. I have the Y-axis series is along the left side of the chart. When all X values are positive, everything displays normally. However, if any X-axis values are negative, the whole graph shifts slightly leftward and the Y-axis title is no longer visible. It seems to be overwritten by the shifted graph or simply pushed into nondisplay area.
Is there something I can do to make the chart stay put?
View 3 Replies
View Related
Sep 4, 2014
I have created range bar chart and I am not able to achieve the following tasks.
1. Change X-axis Label Format to Quarter:
I have x-axis with dates and y axis of project groups. I have changed x-axis interval type = month and interval=3.
Set the Maximum = Max(ProjectEndDate) and Minimum = Min(ProjectStartDate).
Now my chart showing 3 months x-axis interval dates in mm/dd/yyyy format. I want to change this interval date format to Quarter. The problem is LabelsFormat property is not recognize the "=Q or q or quarter" and also not accepting the expressions. How can I achieve this?
2. Placing series side by side when it is not overlapping
I want to place the same group series side by side only when the previous project end date is less than next project start date, otherwise place the next project to next row. How can I achieve this?
View 2 Replies
View Related
May 20, 2015
Currently I report our monthly fees broken down into 4 weeks per month by using 4 separate datasets with the following code
SELECT
SUM(Practice.ibvSalesByJob.JobBilledExVAT) AS Sum_JobBilledExVAT
FROM
Practice.ibvSalesByJob
INNER JOIN Practice.idvJobType
[Code] ....
The second dataset then has the date code changed to
AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/08/' + Cast(@DateYear AS char(4)) + ' 00:00:01'
AND Practice.ibvSalesByJob.[Date] <= Cast(@Month AS char(2)) + '/16/' + Cast(@DateYear AS char(4)) + ' 00:00:00'
The third
AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/16/' + Cast(@DateYear AS char(4)) + ' 00:00:01'
AND Practice.ibvSalesByJob.[Date] <= Cast(@Month AS char(2)) + '/23/' + Cast(@DateYear AS char(4)) + ' 00:00:00'
The fourth
AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/23/' + Cast(@DateYear AS char(4)) + ' 00:00:01'
Now I was hoping so that I could report the above data in one chart and do an expression on the category and group the dates so I would just have one dataset like below but four separate columns saying Week 1, 2 3 and 4 and then the sum filtered in line.
SELECT
SUM(Practice.ibvSalesByJob.JobBilledExVAT) AS Sum_JobBilledExVAT
FROM
Practice.ibvSalesByJob
INNER JOIN Practice.idvJobType
[Code] ....
If I could somehow with SQL tie in all 4 separate datasets and display them as Week 1, 2, 3 and 4 underneath the dataset and selectable.An even simpler solution maybe just understanding how charts work, I can get it so I display the 4 separate weeks in the chart however I can't get the bottom line (Category Group) to display Week 1, 2, 3 and 4.
View 8 Replies
View Related
Jun 11, 2015
I want a report that displays selected year quantity sales and previous year sales quantity and their quantity difference.
i also want to display a chart like I added year to the series group but i don't know how to add difference to the series group.
View 5 Replies
View Related
Mar 17, 2008
Hi
please excuse my ignorance but if someone could point me in the right direction i would be grateful.
i have produce a chart with some data against date points on x axis. i have another date field which i want to combine with the orignal date axis is this possible .
ie
table
results planned date Acutual date
10 02/03/07 01/03/07
46 03/03/07 03/03/07
60 06/03/07 07/03/07
i want to combine the planned date and actual date as an x axis
thanks
View 3 Replies
View Related
Jan 14, 2007
I have a simple-column chart and in the x-axis I put the date values and in the y-axis the sale price values.
The chart works perfectly in the case when there is only one sale price for the same date. But, when the price changes during the same day, then there is problem. In the following example
x y
1/1/2007 6.25
2/1/2007 7
2/1/2007 4
3/1/2007 8
the chart will have three columns and in the date 2/1/2007 will display the min or max of the two values. What I need is to represent all the values i.e. the chart must have four columns , as much as the rows of the dataset
Is it possible?
View 1 Replies
View Related
Mar 26, 2007
Hello All,
I have a reporting services report in the form of a chart. I have two datafields on the chart.
I need to be able to dynamically hide one datafield and view the chart for the other one and vice versa.
How do I do this ?
Any help would be appreciated..
Thanks!
View 4 Replies
View Related
Jul 17, 2014
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
View 2 Replies
View Related
Feb 13, 2012
I have a report designed in SSRS 2008 R2.My issue is that the data labels do not stay outside the bars for high values.
View 4 Replies
View Related
Mar 6, 2008
Hi,
I would like to know how to keep all values in a category/axis in a table or chart even when there are no values for that value.
Example:
Category value Data
A 11
B 13
C NULL
D NULL
E 14
Currently, category values C and D are disappearing from my tables and charts. I would like to keep them there in both and just show no data.
Any ideas on how to accomplish?
View 2 Replies
View Related
Oct 21, 2015
I need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series)
2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series)
3) These data points are for the 12 months
4) there should be a secondary axis for the cumulative one
Can I create this using the same data set?
View 6 Replies
View Related
Oct 20, 2015
I have a table in which I have to use SSRS Sparklines. But the requirement is that, I have to lookup the Y axis values and Category groups from another dataset, using a unique identifier in both the datasets. Lets say DS1 is the parent dataset and DS2 has got the Y values and Category (12 months) for the Sparkline.I cannot use DS2 as Default dataset for the table, because it will result in writing lookup expressions for around 20-25 cells other than Sparkline cell.So I used the below expressions for Sparkline.
Value axis :
=lookupset(Fields!RowID.Value,Fields!RowID.Value,Fields!Trend.Value,"DS2")
Category axis :
=lookupset(Fields!RowID.Value,Fields!RowID.Value,Fields!MonthName.Value,"DS2")
I used lookup set, because I believe we have to map a set of values to the Sparkline chart. But it throws me the below error. Is it possible to configure a Sparkline without Category axis? I asked because I can manage my chart if SParkline can plot the trend values alone, without a category axis also.
View 4 Replies
View Related
Oct 30, 2015
I'm putting Interval 50 and Maximum 100 in Vertical Axis Property but by default 0 is coming. I unchecked mark of Always include Zero Box and Minimum is Auto. But still I'm getting 0 in Vertical Axis Chart in SSRS.
View 7 Replies
View Related
Nov 19, 2015
We run 2014 enterprise. I have 3 series being charted on a line (with dots) chart. I know what the series are but to ssrs they are dynamic. One of them really needs a secondary y axis because its a percentage. Is there a way to do this? From what I read if I was to somehow make them less dynamic, then ssrs could treat this one differently. Also, what if I want data point values to show only on this plot but not the other two?
View 4 Replies
View Related
Nov 20, 2015
I have line chart and want to see the xaxis date on interval of 5 days and it should start from first date and end at last date.
If my range starts from 11 Nov to 1 Dec
11 Nov 16 Nov.....1Dec
My date column have null fields . Though I have tried putting dummy values it still does not work so its not the problem of NULL.
I am getting Below results:
If I keep Interval one it starts form 11th and ends at 01 dec but it shows all dates.
View 3 Replies
View Related
Jun 14, 2012
i would like to show all Labels available in a Chart and rotate the Labels 90°. How can i do that ? I changed the Propertie "Interval" to 1, "LabelsAngle" to 90, "LabelsAutoFitDisabled" to true in my Chart Axis.
View 12 Replies
View Related
Jan 17, 2007
I'm trying to convert an old chart to Reporting Services.
We have used the same dataset for years, it is very very simple. But it seems to me that Reporting Services can't deal with this simple dataset.
My question is: How can I get create a line chart using this dataset.
The data set consists of 1 row with 96 columns (a day divided into 96 sets of 15 minutes). Each column records how many events occurs within the 15 minutes. Along the x axis I would like to display a vertical line every 4 hours. The y axis should be numbered 0 to the highest value in the results.
I could not make this dataset any more simple than it is. But Reporting Services just chokes on this.
Here is a sample of the dataset :
1 2 0 4 5 6 7 8 9 10... 96
View 1 Replies
View Related
Oct 6, 2015
displaying time interval on y -axis for an ssrs report.
the values are static... it should start from 00:00 - 23:59 with 00:30 interval....
interval of 30 mins...
I tried several functions that are available but didnt work.
View 6 Replies
View Related
Jun 22, 2015
Is it possible to remove the tick marks that I have circled in red?The chart has data Week by week over a year, and the T1, T2 etc are equivalent to Quarter1, Quarter 2 etcI've got a 3 level grouping, with the top level being Year, then Quarter, then Week. The label for the "Week" grouping is set to blank, and that's why you don't see it here.Removing the Tick marks would make the chart legend more readable in my opinion.
View 2 Replies
View Related
Sep 15, 2015
When I tried to create a bar chart using SSRS 2012, the vertical axis values are repeating for smaller data sets values. It's only happening when the data labels are below 5, when the data is above 5 this chart represents data fine.
I tried specifying the custom intervals and this option all together eliminated the bar for value 1, instead it only showed the value 1 as text on the chart.
I tried changing the data interval type as number and the data type is of Integer, these are counts which I am showing in the chart.
View 3 Replies
View Related
Sep 29, 2015
I have an SSRS 2012 table report with groups; each group is broken ie. one group for one page, and there are multiple groups in multiple pages.
'GroupName' column has multiple values - X,Y,Z,......
I need to group 'GroupName' with X,Y,Z,..... ie value X in page 1,value Y in page 2, value Z in page 3...
Now, I need to display another column (ABC) in this table report (outside the group column 'GroupName'); this outside column itself is another column header (not a group header) in the table (report) and it derives its name partly from the 'GroupName' values:
Example:
Value X for GroupName in page 1 will mean, in page 1, column Name of ABC column must be ABC-X Value Y for GroupName in page 2 will mean, in page 2, column Name of ABC column must be ABC-Y Value Z for GroupName in page 3 will mean, in page 3, column Name of
ABC column must be ABC-Z
ie the column name of ABC (Clm ABC) must be dynamic as per the GroupName values (X,Y,Z....)
Page1:
GroupName Clm ABC-X
X
Page2:
GroupName Clm ABC-Y
Y
Page3:
GroupName Clm ABC-Z
Z
I have been able to use First(ReportItems!GroupName.Value) in the Page Header to get GroupNames displayed in each page; I get X in page 1, Y in page 2, Z in page 3.....
However, when I use ReportItems (that refers to a group name) in the Report Body outside the group,
I get the following error:
Report item expressions can only refer to other report items within the same grouping scope or a containing grouping scope
I need to get the X, Y, Z ... in each page for the column ABC.
I have been able to use this - First(Fields!GroupName.Value); however, I get ABC-X, ABC-X, ABC-X in each of the pages for the ABC column, instead of ABC-X in page 1, ABC-Y in page 2, ABC-Z in page 3, ...
View 4 Replies
View Related
Oct 17, 2007
I created a graph which retrieves value from database.And currently,my axis is in ranged 0-10.But i have a doubt that my value in will exceed my maximum y-axis value 10..My question is, could it be possible that i make my y-axis dynamic??Thanks!!
View 5 Replies
View Related
Jun 5, 2012
I'm struggling with trying to display a single vertical stripline at a date value along my x-axis.
I'm using the following non-default settings within the stripline editor:
bordercolor = tomato
borderstyle = solid
borderwidth = 1pt
intervaloffset = Fields!uidate.Value.ToOADate()
where uidate is a calculated field in my dataset that always has the value of 05/29/2012 (using formatdatetime("05/29/2012",dateformat.ShortDate))
Everything else is set to Auto, with stripwidth=0
I'm trying to display a single vertical line at the x-axis value of 05/29/2012
I have previously tried setting the interval offset to "05/29/2012" but that didn't work. I've also tried setting the value of a hidden text box on the report to "05/29/2012" and setting the interval offset to the value of that text box, but that gave me a "text box not declared" error.
How I can simply display a vertical stripline on my line graph at the x-axis value of 05/29/2012 ?
View 2 Replies
View Related
Sep 5, 2007
Friends, I would like to put employee name and type of leave on the y-axis and on the x-axis the date, so that users can select the date start and end and employee/employees and see the chart or leaves.
But how to do that?
My fields are: Name, LeaveDescription and Date.
The data with me is for each employee, for each date, leave codes are there.
View 4 Replies
View Related
Jun 5, 2008
I'm just getting into creating charts and one I'm working on could realy do with a prefix on its axis label, the symbol '£'.
I honestly have no idea how to do this and what syntax to use, can anyone help ?.
Also as the label could do with having a thousands seperator as well but as you can tell I'd have no idea how to do this either.
Thanks.
View 1 Replies
View Related
May 29, 2007
How is it possible to have the values on the chart x-axis to be shown vertically rather than horizantal?
Thanks
View 3 Replies
View Related
Nov 27, 2007
Hi!
In SSRS2005 I made an chart,
but on x-axis I only want date-part (if possible ISO-format yyyy-mm-dd).
The resulting chart shows date AND time-part. How to avoid this?
thanks.
View 5 Replies
View Related
Jul 17, 2007
i put the formula day(Parameters!Parameter1.Value) into my y-axis's major gridlines interval value, and it doesn't obey the value i put in.
is this a bug or another "feature"?
when i just type in "31" is works as expected.
is there a work around for this?
View 4 Replies
View Related
Sep 30, 2007
Hi
I have a report where i am using line chart with date column for grouping.
For X axis i have choosen the "NUmeric or Timescale Values". In the Chart the dates are displayed in this format 1/1/2007 12:00:00 AM . I don't want Time part to be shown
If possible i want it to be shown as 1-Jan. The Chart should display Point even when there is no record returned from the query.
Say DATE Column
Date AMOUNT
1/1/2007 12:00:00 AM 10
1/3/2007 12:00:00 AM 20
1/4/2007 12:00:00 AM 30
Now the Chart should plot from 1/1/2007 to 1/4/2007 including 1/2/2007
Any help on this will be appreciated
Thanks
Smitha
View 1 Replies
View Related
